From: Sasha Levin <sashal@kernel.org> To: linux-kernel@vger.kernel.org, stable@vger.kernel.org Cc: Geert Uytterhoeven <geert+renesas@glider.be>, Laurent Pinchart <laurent.pinchart@ideasonboard.com>, Tony Lindgren <tony@atomide.com>, Sasha Levin <sashal@kernel.org>, linux-omap@vger.kernel.org, devicetree@vger.kernel.org Subject: [PATCH AUTOSEL 4.19 22/39] ARM: dts: dra7x-evm: Align GPIO hog names with dt-schema Date: Wed, 14 Jul 2021 15:46:07 -0400 [thread overview] Message-ID: <20210714194625.55303-22-sashal@kernel.org> (raw) In-Reply-To: <20210714194625.55303-1-sashal@kernel.org> From: Geert Uytterhoeven <geert+renesas@glider.be> [ Upstream commit 0c149400c2f676e7b4cc68e517db29005a7a38c7 ] The dt-schema for nxp,pcf8575 expects GPIO hogs node names to end with a 'hog' suffix. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org> --- arch/arm/boot/dts/dra7-evm.dts | 2 +- arch/arm/boot/dts/dra71-evm.dts | 2 +- arch/arm/boot/dts/dra72-evm-common.dtsi | 2 +- arch/arm/boot/dts/dra76-evm.dts | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 6ed5f9156270..1b7f1c7921de 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -335,7 +335,7 @@ pcf_hdmi: gpio@26 { reg = <0x26>; gpio-controller; #gpio-cells = <2>; - p1 { + hdmi-audio-hog { /* vin6_sel_s0: high: VIN6, low: audio */ gpio-hog; gpios = <1 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts index c471bf3277b4..60ce286edf03 100644 --- a/arch/arm/boot/dts/dra71-evm.dts +++ b/arch/arm/boot/dts/dra71-evm.dts @@ -161,7 +161,7 @@ &pcf_gpio_21 { }; &pcf_hdmi { - p0 { + hdmi-i2c-disable-hog { /* * PM_OEn to High: Disable routing I2C3 to PM_I2C * With this PM_SEL(p3) should not matter diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi index e297b923b71a..b33221747ac3 100644 --- a/arch/arm/boot/dts/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -264,7 +264,7 @@ pcf_hdmi: pcf8575@26 { */ lines-initial-states = <0x0f2b>; - p1 { + hdmi-audio-hog { /* vin6_sel_s0: high: VIN6, low: audio */ gpio-hog; gpios = <1 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts index 5a46163d465f..08f414db95aa 100644 --- a/arch/arm/boot/dts/dra76-evm.dts +++ b/arch/arm/boot/dts/dra76-evm.dts @@ -295,7 +295,7 @@ pcf_hdmi: pcf8575@26 { reg = <0x26>; gpio-controller; #gpio-cells = <2>; - p1 { + hdmi-audio-hog { /* vin6_sel_s0: high: VIN6, low: audio */ gpio-hog; gpios = <1 GPIO_ACTIVE_HIGH>; -- 2.30.2
next prev parent reply other threads:[~2021-07-14 19:55 UTC|newest] Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-07-14 19:45 [PATCH AUTOSEL 4.19 01/39] ARM: dts: gemini: rename mdio to the right name Sasha Levin 2021-07-14 19:45 ` [PATCH AUTOSEL 4.19 02/39] ARM: dts: gemini: add device_type on pci Sasha Levin 2021-07-14 19:45 ` [PATCH AUTOSEL 4.19 03/39] ARM: dts: rockchip: fix pinctrl sleep nodename for rk3036-kylin and rk3288 Sasha Levin 2021-07-14 19:45 ` [PATCH AUTOSEL 4.19 04/39] arm64: dts: rockchip: fix pinctrl sleep nodename for rk3399.dtsi Sasha Levin 2021-07-14 19:45 ` [PATCH AUTOSEL 4.19 05/39] ARM: dts: rockchip: Fix the timer clocks order Sasha Levin 2021-07-14 19:45 ` [PATCH AUTOSEL 4.19 06/39] ARM: dts: rockchip: Fix IOMMU nodes properties on rk322x Sasha Levin 2021-07-14 19:45 ` [PATCH AUTOSEL 4.19 07/39] ARM: dts: rockchip: Fix power-controller node names for rk3288 Sasha Levin 2021-07-14 19:45 ` [PATCH AUTOSEL 4.19 08/39] arm64: dts: rockchip: Fix power-controller node names for rk3328 Sasha Levin 2021-07-14 19:45 ` [PATCH AUTOSEL 4.19 09/39] reset: ti-syscon: fix to_ti_syscon_reset_data macro Sasha Levin 2021-07-14 19:45 ` [PATCH AUTOSEL 4.19 10/39] ARM: brcmstb: dts: fix NAND nodes names Sasha Levin 2021-07-14 19:45 ` [PATCH AUTOSEL 4.19 11/39] ARM: Cygnus: " Sasha Levin 2021-07-14 19:45 ` [PATCH AUTOSEL 4.19 12/39] ARM: NSP: " Sasha Levin 2021-07-14 19:45 ` [PATCH AUTOSEL 4.19 13/39] ARM: dts: BCM63xx: Fix " Sasha Levin 2021-07-14 19:45 ` [PATCH AUTOSEL 4.19 14/39] ARM: dts: Hurricane 2: " Sasha Levin 2021-07-14 19:46 ` [PATCH AUTOSEL 4.19 15/39] ARM: dts: imx25-pinfunc: Fix gpio function name for pads GPIO_[A-F] Sasha Levin 2021-07-14 19:46 ` [PATCH AUTOSEL 4.19 16/39] ARM: dts: imx6: phyFLEX: Fix UART hardware flow control Sasha Levin 2021-07-14 19:46 ` [PATCH AUTOSEL 4.19 17/39] ARM: imx: pm-imx5: Fix references to imx5_cpu_suspend_info Sasha Levin 2021-07-14 19:46 ` [PATCH AUTOSEL 4.19 18/39] rtc: mxc_v2: add missing MODULE_DEVICE_TABLE Sasha Levin 2021-07-14 19:46 ` [PATCH AUTOSEL 4.19 19/39] ARM: dts: am335x: align GPIO hog names with dt-schema Sasha Levin 2021-07-14 19:46 ` [PATCH AUTOSEL 4.19 20/39] ARM: dts: am437x: align gpio " Sasha Levin 2021-07-14 19:46 ` [PATCH AUTOSEL 4.19 21/39] ARM: dts: omap5-board-common: " Sasha Levin 2021-07-14 19:46 ` Sasha Levin [this message] 2021-07-14 19:46 ` [PATCH AUTOSEL 4.19 23/39] ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards Sasha Levin 2021-07-14 19:46 ` [PATCH AUTOSEL 4.19 24/39] ARM: dts: stm32: fix RCC node name on stm32f429 MCU Sasha Levin 2021-07-14 19:46 ` [PATCH AUTOSEL 4.19 25/39] ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings Sasha Levin 2021-07-14 19:46 ` [PATCH AUTOSEL 4.19 26/39] arm64: dts: juno: Update SCPI nodes as per the YAML schema Sasha Levin 2021-07-14 19:46 ` [PATCH AUTOSEL 4.19 27/39] ARM: dts: rockchip: fix supply properties in io-domains nodes Sasha Levin 2021-07-14 19:46 ` [PATCH AUTOSEL 4.19 28/39] ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warnings Sasha Levin 2021-07-14 19:46 ` [PATCH AUTOSEL 4.19 29/39] ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15 Sasha Levin 2021-07-14 19:46 ` [PATCH AUTOSEL 4.19 30/39] soc/tegra: fuse: Fix Tegra234-only builds Sasha Levin 2021-07-14 19:46 ` [PATCH AUTOSEL 4.19 31/39] arm64: dts: ls208xa: remove bus-num from dspi node Sasha Levin 2021-07-23 20:11 ` Pavel Machek 2021-07-14 19:46 ` [PATCH AUTOSEL 4.19 32/39] thermal/core: Correct function name thermal_zone_device_unregister() Sasha Levin 2021-07-14 19:46 ` [PATCH AUTOSEL 4.19 33/39] kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set Sasha Levin 2021-07-14 19:46 ` [PATCH AUTOSEL 4.19 34/39] rtc: max77686: Do not enforce (incorrect) interrupt trigger type Sasha Levin 2021-07-14 19:46 ` [PATCH AUTOSEL 4.19 35/39] scsi: aic7xxx: Fix unintentional sign extension issue on left shift of u8 Sasha Levin 2021-07-14 19:46 ` [PATCH AUTOSEL 4.19 36/39] scsi: libsas: Add LUN number check in .slave_alloc callback Sasha Levin 2021-07-14 19:46 ` [PATCH AUTOSEL 4.19 37/39] scsi: be2iscsi: Fix some missing space in some messages Sasha Levin 2021-07-14 19:46 ` [PATCH AUTOSEL 4.19 38/39] scsi: libfc: Fix array index out of bound exception Sasha Levin 2021-07-14 19:46 ` [PATCH AUTOSEL 4.19 39/39] sched/fair: Fix CFS bandwidth hrtimer expiry type Sasha Levin
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210714194625.55303-22-sashal@kernel.org \ --to=sashal@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=geert+renesas@glider.be \ --cc=laurent.pinchart@ideasonboard.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=stable@vger.kernel.org \ --cc=tony@atomide.com \ --subject='Re: [PATCH AUTOSEL 4.19 22/39] ARM: dts: dra7x-evm: Align GPIO hog names with dt-schema' \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).