From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Geert Uytterhoeven <geert+renesas@glider.be>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Tony Lindgren <tony@atomide.com>, Sasha Levin <sashal@kernel.org>,
linux-omap@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH AUTOSEL 4.14 18/28] ARM: dts: dra7x-evm: Align GPIO hog names with dt-schema
Date: Wed, 14 Jul 2021 15:47:13 -0400 [thread overview]
Message-ID: <20210714194723.55677-18-sashal@kernel.org> (raw)
In-Reply-To: <20210714194723.55677-1-sashal@kernel.org>
From: Geert Uytterhoeven <geert+renesas@glider.be>
[ Upstream commit 0c149400c2f676e7b4cc68e517db29005a7a38c7 ]
The dt-schema for nxp,pcf8575 expects GPIO hogs node names to end with a
'hog' suffix.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/dra7-evm.dts | 2 +-
arch/arm/boot/dts/dra71-evm.dts | 2 +-
arch/arm/boot/dts/dra72-evm-common.dtsi | 2 +-
arch/arm/boot/dts/dra76-evm.dts | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index aa426dabb6c3..c3990325f7e6 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -315,7 +315,7 @@ pcf_hdmi: gpio@26 {
reg = <0x26>;
gpio-controller;
#gpio-cells = <2>;
- p1 {
+ hdmi-audio-hog {
/* vin6_sel_s0: high: VIN6, low: audio */
gpio-hog;
gpios = <1 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts
index 64363f75c01a..cf1db1b71bab 100644
--- a/arch/arm/boot/dts/dra71-evm.dts
+++ b/arch/arm/boot/dts/dra71-evm.dts
@@ -160,7 +160,7 @@ &pcf_gpio_21 {
};
&pcf_hdmi {
- p0 {
+ hdmi-i2c-disable-hog {
/*
* PM_OEn to High: Disable routing I2C3 to PM_I2C
* With this PM_SEL(p3) should not matter
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
index 2e485a13dfd7..a5e65c1a568e 100644
--- a/arch/arm/boot/dts/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -272,7 +272,7 @@ pcf_hdmi: pcf8575@26 {
*/
lines-initial-states = <0x0f2b>;
- p1 {
+ hdmi-audio-hog {
/* vin6_sel_s0: high: VIN6, low: audio */
gpio-hog;
gpios = <1 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index f64aab450315..51ff6321199d 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -314,7 +314,7 @@ pcf_hdmi: pcf8575@26 {
reg = <0x26>;
gpio-controller;
#gpio-cells = <2>;
- p1 {
+ hdmi-audio-hog {
/* vin6_sel_s0: high: VIN6, low: audio */
gpio-hog;
gpios = <1 GPIO_ACTIVE_HIGH>;
--
2.30.2
next prev parent reply other threads:[~2021-07-14 20:02 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-14 19:46 [PATCH AUTOSEL 4.14 01/28] ARM: dts: gemini: add device_type on pci Sasha Levin
2021-07-14 19:46 ` [PATCH AUTOSEL 4.14 02/28] ARM: dts: rockchip: fix pinctrl sleep nodename for rk3036-kylin and rk3288 Sasha Levin
2021-07-14 19:46 ` [PATCH AUTOSEL 4.14 03/28] arm64: dts: rockchip: fix pinctrl sleep nodename for rk3399.dtsi Sasha Levin
2021-07-14 19:46 ` [PATCH AUTOSEL 4.14 04/28] ARM: dts: rockchip: Fix the timer clocks order Sasha Levin
2021-07-14 19:47 ` [PATCH AUTOSEL 4.14 05/28] ARM: dts: rockchip: Fix power-controller node names for rk3288 Sasha Levin
2021-07-14 19:47 ` [PATCH AUTOSEL 4.14 06/28] arm64: dts: rockchip: Fix power-controller node names for rk3328 Sasha Levin
2021-07-14 19:47 ` [PATCH AUTOSEL 4.14 07/28] reset: ti-syscon: fix to_ti_syscon_reset_data macro Sasha Levin
2021-07-14 19:47 ` [PATCH AUTOSEL 4.14 08/28] ARM: brcmstb: dts: fix NAND nodes names Sasha Levin
2021-07-14 19:47 ` [PATCH AUTOSEL 4.14 09/28] ARM: Cygnus: " Sasha Levin
2021-07-14 19:47 ` [PATCH AUTOSEL 4.14 10/28] ARM: NSP: " Sasha Levin
2021-07-14 19:47 ` [PATCH AUTOSEL 4.14 11/28] ARM: dts: BCM63xx: Fix " Sasha Levin
2021-07-14 19:47 ` [PATCH AUTOSEL 4.14 12/28] ARM: dts: imx25-pinfunc: Fix gpio function name for pads GPIO_[A-F] Sasha Levin
2021-07-14 19:47 ` [PATCH AUTOSEL 4.14 13/28] ARM: dts: imx6: phyFLEX: Fix UART hardware flow control Sasha Levin
2021-07-14 19:47 ` [PATCH AUTOSEL 4.14 14/28] ARM: imx: pm-imx5: Fix references to imx5_cpu_suspend_info Sasha Levin
2021-07-14 19:47 ` [PATCH AUTOSEL 4.14 15/28] ARM: dts: am335x: align GPIO hog names with dt-schema Sasha Levin
2021-07-14 19:47 ` [PATCH AUTOSEL 4.14 16/28] ARM: dts: am437x: align gpio " Sasha Levin
2021-07-14 19:47 ` [PATCH AUTOSEL 4.14 17/28] ARM: dts: omap5-board-common: " Sasha Levin
2021-07-14 19:47 ` Sasha Levin [this message]
2021-07-14 19:47 ` [PATCH AUTOSEL 4.14 19/28] ARM: dts: stm32: fix RCC node name on stm32f429 MCU Sasha Levin
2021-07-14 19:47 ` [PATCH AUTOSEL 4.14 20/28] arm64: dts: juno: Update SCPI nodes as per the YAML schema Sasha Levin
2021-07-14 19:47 ` [PATCH AUTOSEL 4.14 21/28] arm64: dts: ls208xa: remove bus-num from dspi node Sasha Levin
2021-07-14 19:47 ` [PATCH AUTOSEL 4.14 22/28] thermal/core: Correct function name thermal_zone_device_unregister() Sasha Levin
2021-07-14 19:47 ` [PATCH AUTOSEL 4.14 23/28] kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set Sasha Levin
2021-07-14 19:47 ` [PATCH AUTOSEL 4.14 24/28] rtc: max77686: Do not enforce (incorrect) interrupt trigger type Sasha Levin
2021-07-14 19:47 ` [PATCH AUTOSEL 4.14 25/28] scsi: aic7xxx: Fix unintentional sign extension issue on left shift of u8 Sasha Levin
2021-07-14 19:47 ` [PATCH AUTOSEL 4.14 26/28] scsi: be2iscsi: Fix some missing space in some messages Sasha Levin
2021-07-14 19:47 ` [PATCH AUTOSEL 4.14 27/28] scsi: libfc: Fix array index out of bound exception Sasha Levin
2021-07-14 19:47 ` [PATCH AUTOSEL 4.14 28/28] sched/fair: Fix CFS bandwidth hrtimer expiry type Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210714194723.55677-18-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).