[PATCH] dt-bindings: power: reset: convert Xilinx Zynq MPSoC bindings to YAML

[Nobuhiro Iwamatsu <iwamatsu@nigauri.org>]

Convert power managemnet for Xilinx Zynq MPSoC bindings documentation to
YAML.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
---
 .../power/reset/xlnx,zynqmp-power.txt         | 61 --------------
 .../power/reset/xlnx,zynqmp-power.yaml        | 83 +++++++++++++++++++
 2 files changed, 83 insertions(+), 61 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
 create mode 100644 Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml

diff --git a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
deleted file mode 100644
index bb529ecf8a5768..00000000000000
--- a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
+++ /dev/null
@@ -1,61 +0,0 @@
---------------------------------------------------------------------
-Device Tree Bindings for the Xilinx Zynq MPSoC Power Management
---------------------------------------------------------------------
-The zynqmp-power node describes the power management configurations.
-It will control remote suspend/shutdown interfaces.
-
-Required properties:
- - compatible:		Must contain:	"xlnx,zynqmp-power"
- - interrupts:		Interrupt specifier
-
-Optional properties:
- - mbox-names	: Name given to channels seen in the 'mboxes' property.
-		  "tx" - Mailbox corresponding to transmit path
-		  "rx" - Mailbox corresponding to receive path
- - mboxes	: Standard property to specify a Mailbox. Each value of
-		  the mboxes property should contain a phandle to the
-		  mailbox controller device node and an args specifier
-		  that will be the phandle to the intended sub-mailbox
-		  child node to be used for communication. See
-		  Documentation/devicetree/bindings/mailbox/mailbox.txt
-		  for more details about the generic mailbox controller
-		  and client driver bindings. Also see
-		  Documentation/devicetree/bindings/mailbox/ \
-		  xlnx,zynqmp-ipi-mailbox.txt for typical controller that
-		  is used to communicate with this System controllers.
-
---------
-Examples
---------
-
-Example with interrupt method:
-
-firmware {
-	zynqmp_firmware: zynqmp-firmware {
-		compatible = "xlnx,zynqmp-firmware";
-		method = "smc";
-
-		zynqmp_power: zynqmp-power {
-			compatible = "xlnx,zynqmp-power";
-			interrupts = <0 35 4>;
-		};
-	};
-};
-
-Example with IPI mailbox method:
-
-firmware {
-	zynqmp_firmware: zynqmp-firmware {
-		compatible = "xlnx,zynqmp-firmware";
-		method = "smc";
-
-		zynqmp_power: zynqmp-power {
-			compatible = "xlnx,zynqmp-power";
-			interrupt-parent = <&gic>;
-			interrupts = <0 35 4>;
-			mboxes = <&ipi_mailbox_pmu0 0>,
-				 <&ipi_mailbox_pmu0 1>;
-			mbox-names = "tx", "rx";
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml
new file mode 100644
index 00000000000000..68d7c14a716388
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/xlnx,zynqmp-power.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynq MPSoC Power Management Device Tree Bindings
+
+maintainers:
+  - Michal Simek <michal.simek@xilinx.com>
+
+description: |
+  The zynqmp-power node describes the power management configurations.
+  It will control remote suspend/shutdown interfaces.
+
+properties:
+  compatible:
+    const: "xlnx,zynqmp-power"
+
+  interrupts:
+    maxItems: 1
+
+  mboxes:
+    description: |
+      Standard property to specify a Mailbox. Each value of
+      the mboxes property should contain a phandle to the
+      mailbox controller device node and an args specifier
+      that will be the phandle to the intended sub-mailbox
+      child node to be used for communication. See
+      Documentation/devicetree/bindings/mailbox/mailbox.txt
+      for more details about the generic mailbox controller
+      and client driver bindings. Also see
+      Documentation/devicetree/bindings/mailbox/ \
+      xlnx,zynqmp-ipi-mailbox.txt for typical controller that
+      is used to communicate with this System controllers.
+    items:
+      - description: tx channel
+      - description: rx channel
+
+  mbox-names:
+    description:
+      Name given to channels seen in the 'mboxes' property.
+    items:
+      - const: tx
+      - const: rx
+
+required:
+  - compatible
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |+
+
+    // Example with interrupt method:
+
+    firmware {
+      zynqmp-firmware {
+        zynqmp-power {
+          compatible = "xlnx,zynqmp-power";
+          interrupts = <0 35 4>;
+        };
+      };
+    };
+
+  - |+
+
+    // Example with IPI mailbox method:
+
+    firmware {
+      zynqmp-firmware {
+        zynqmp-power {
+          compatible = "xlnx,zynqmp-power";
+          interrupt-parent = <&gic>;
+          interrupts = <0 35 4>;
+          mboxes = <&ipi_mailbox_pmu1 0>,
+                   <&ipi_mailbox_pmu1 1>;
+          mbox-names = "tx", "rx";
+        };
+      };
+    };
+...
-- 
2.32.0