Re: [PATCH v4] dt-bindings: riscv: add starfive jh7100 bindings

[Rob Herring <robh@kernel.org>]

On Mon, 12 Jul 2021 23:30:18 -0700, Drew Fustini wrote:
> Add DT binding documentation for the StarFive JH7100 Soc [1] and the
> BeagleV Starlight JH7100 board [2].
> 
> [1] https://github.com/starfive-tech/beaglev_doc
> [2] https://github.com/beagleboard/beaglev-starlight
> 
> Signed-off-by: Drew Fustini <drew@beagleboard.org>
> ---
> v4 changes:
> - removed JH7100 SoC revision number after discussion with Geert
> 
> v3 changes:
> - added revision number for the board and soc after question from Palmer
> 
> v2 changes:
> - removed "items:" entry that only had "const: starfive,jh7100"
> - correct typo in Description:
> 
> Results of running checks:
>   $ make -j8 ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- dt_binding_check \
>     DT_SCHEMA_FILES=Documentation/devicetree/bindings/riscv/starfive.yaml
>     CHKDT   Documentation/devicetree/bindings/processed-schema-examples.json
>     DTEX    Documentation/devicetree/bindings/riscv/starfive.example.dts
>     SCHEMA  Documentation/devicetree/bindings/processed-schema-examples.json
>     DTC     Documentation/devicetree/bindings/riscv/starfive.example.dt.yaml
>     CHECK   Documentation/devicetree/bindings/riscv/starfive.example.dt.yaml
>   $ make -j8 ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- dtbs_check \
>     DT_SCHEMA_FILES=Documentation/devicetree/bindings/riscv/starfive.yaml
>     SYNC    include/config/auto.conf.cmd
>     UPD     include/config/kernel.release
>     SCHEMA  Documentation/devicetree/bindings/processed-schema.json
>     DTC     arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dtb
>     DTC     arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dt.yaml
>     DTC     arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dt.yaml
>     DTC     arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dt.yaml
>     CHECK   arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dt.yaml
>     CHECK   arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dt.yaml
>     CHECK   arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dt.yaml
> 
> The dts file is from vendor repo and is being cleaned up right now in
> preperation for submitting to the mailing list:
> https://github.com/starfive-tech/linux/tree/beaglev/arch/riscv/boot/dts/starfive
> 
>  .../devicetree/bindings/riscv/starfive.yaml   | 27 +++++++++++++++++++
>  1 file changed, 27 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/riscv/starfive.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>

(I'm expecting the RiscV maintainers to take this.)