From: Daniel Palmer <daniel@0x0f.com>
To: devicetree@vger.kernel.org, linux-gpio@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linus.walleij@linaro.org,
robh@kernel.org, romain.perier@gmail.com,
Daniel Palmer <daniel@0x0f.com>
Subject: [PATCH 04/10] gpio: msc313: Add support for SSD201 and SSD202D
Date: Sat, 17 Jul 2021 13:56:21 +0900 [thread overview]
Message-ID: <20210717045627.1739959-5-daniel@0x0f.com> (raw)
In-Reply-To: <20210717045627.1739959-1-daniel@0x0f.com>
This adds GPIO support for the SSD201 and SSD202D chips.
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
---
drivers/gpio/gpio-msc313.c | 261 +++++++++++++++++++++++++++++++++++++
1 file changed, 261 insertions(+)
diff --git a/drivers/gpio/gpio-msc313.c b/drivers/gpio/gpio-msc313.c
index a894bafbd4c3..b2c90bdd39d0 100644
--- a/drivers/gpio/gpio-msc313.c
+++ b/drivers/gpio/gpio-msc313.c
@@ -221,6 +221,263 @@ static const unsigned int msc313_offsets[] = {
};
MSC313_GPIO_CHIPDATA(msc313);
+
+/*
+ * Unlike the msc313(e) the ssd20xd have a bunch of pins
+ * that are actually called gpio probably because they
+ * have no dedicated function.
+ */
+#define SSD20XD_PINNAME_GPIO0 "gpio0"
+#define SSD20XD_PINNAME_GPIO1 "gpio1"
+#define SSD20XD_PINNAME_GPIO2 "gpio2"
+#define SSD20XD_PINNAME_GPIO3 "gpio3"
+#define SSD20XD_PINNAME_GPIO4 "gpio4"
+#define SSD20XD_PINNAME_GPIO5 "gpio5"
+#define SSD20XD_PINNAME_GPIO6 "gpio6"
+#define SSD20XD_PINNAME_GPIO7 "gpio7"
+#define SSD20XD_PINNAME_GPIO10 "gpio10"
+#define SSD20XD_PINNAME_GPIO11 "gpio11"
+#define SSD20XD_PINNAME_GPIO12 "gpio12"
+#define SSD20XD_PINNAME_GPIO13 "gpio13"
+#define SSD20XD_PINNAME_GPIO14 "gpio14"
+#define SSD20XD_PINNAME_GPIO85 "gpio85"
+#define SSD20XD_PINNAME_GPIO86 "gpio86"
+#define SSD20XD_PINNAME_GPIO90 "gpio90"
+
+#define SSD20XD_GPIO_NAMES SSD20XD_PINNAME_GPIO0, \
+ SSD20XD_PINNAME_GPIO1, \
+ SSD20XD_PINNAME_GPIO2, \
+ SSD20XD_PINNAME_GPIO3, \
+ SSD20XD_PINNAME_GPIO4, \
+ SSD20XD_PINNAME_GPIO5, \
+ SSD20XD_PINNAME_GPIO6, \
+ SSD20XD_PINNAME_GPIO7, \
+ SSD20XD_PINNAME_GPIO10, \
+ SSD20XD_PINNAME_GPIO11, \
+ SSD20XD_PINNAME_GPIO12, \
+ SSD20XD_PINNAME_GPIO13, \
+ SSD20XD_PINNAME_GPIO14, \
+ SSD20XD_PINNAME_GPIO85, \
+ SSD20XD_PINNAME_GPIO86, \
+ SSD20XD_PINNAME_GPIO90
+
+#define SSD20XD_GPIO_OFF_GPIO0 0x0
+#define SSD20XD_GPIO_OFF_GPIO1 0x4
+#define SSD20XD_GPIO_OFF_GPIO2 0x8
+#define SSD20XD_GPIO_OFF_GPIO3 0xc
+#define SSD20XD_GPIO_OFF_GPIO4 0x10
+#define SSD20XD_GPIO_OFF_GPIO5 0x14
+#define SSD20XD_GPIO_OFF_GPIO6 0x18
+#define SSD20XD_GPIO_OFF_GPIO7 0x1c
+#define SSD20XD_GPIO_OFF_GPIO10 0x28
+#define SSD20XD_GPIO_OFF_GPIO11 0x2c
+#define SSD20XD_GPIO_OFF_GPIO12 0x30
+#define SSD20XD_GPIO_OFF_GPIO13 0x34
+#define SSD20XD_GPIO_OFF_GPIO14 0x38
+#define SSD20XD_GPIO_OFF_GPIO85 0x100
+#define SSD20XD_GPIO_OFF_GPIO86 0x104
+#define SSD20XD_GPIO_OFF_GPIO90 0x114
+
+#define SSD20XD_GPIO_OFFSETS SSD20XD_GPIO_OFF_GPIO0, \
+ SSD20XD_GPIO_OFF_GPIO1, \
+ SSD20XD_GPIO_OFF_GPIO2, \
+ SSD20XD_GPIO_OFF_GPIO3, \
+ SSD20XD_GPIO_OFF_GPIO4, \
+ SSD20XD_GPIO_OFF_GPIO5, \
+ SSD20XD_GPIO_OFF_GPIO6, \
+ SSD20XD_GPIO_OFF_GPIO7, \
+ SSD20XD_GPIO_OFF_GPIO10, \
+ SSD20XD_GPIO_OFF_GPIO11, \
+ SSD20XD_GPIO_OFF_GPIO12, \
+ SSD20XD_GPIO_OFF_GPIO13, \
+ SSD20XD_GPIO_OFF_GPIO14, \
+ SSD20XD_GPIO_OFF_GPIO85, \
+ SSD20XD_GPIO_OFF_GPIO86, \
+ SSD20XD_GPIO_OFF_GPIO90
+
+/* "ttl" pins lcd interface pins */
+#define SSD20XD_PINNAME_TTL0 "ttl0"
+#define SSD20XD_PINNAME_TTL1 "ttl1"
+#define SSD20XD_PINNAME_TTL2 "ttl2"
+#define SSD20XD_PINNAME_TTL3 "ttl3"
+#define SSD20XD_PINNAME_TTL4 "ttl4"
+#define SSD20XD_PINNAME_TTL5 "ttl5"
+#define SSD20XD_PINNAME_TTL6 "ttl6"
+#define SSD20XD_PINNAME_TTL7 "ttl7"
+#define SSD20XD_PINNAME_TTL8 "ttl8"
+#define SSD20XD_PINNAME_TTL9 "ttl9"
+#define SSD20XD_PINNAME_TTL10 "ttl10"
+#define SSD20XD_PINNAME_TTL11 "ttl11"
+#define SSD20XD_PINNAME_TTL12 "ttl12"
+#define SSD20XD_PINNAME_TTL13 "ttl13"
+#define SSD20XD_PINNAME_TTL14 "ttl14"
+#define SSD20XD_PINNAME_TTL15 "ttl15"
+#define SSD20XD_PINNAME_TTL16 "ttl16"
+#define SSD20XD_PINNAME_TTL17 "ttl17"
+#define SSD20XD_PINNAME_TTL18 "ttl18"
+#define SSD20XD_PINNAME_TTL19 "ttl19"
+#define SSD20XD_PINNAME_TTL20 "ttl20"
+#define SSD20XD_PINNAME_TTL21 "ttl21"
+#define SSD20XD_PINNAME_TTL22 "ttl22"
+#define SSD20XD_PINNAME_TTL23 "ttl23"
+#define SSD20XD_PINNAME_TTL24 "ttl24"
+#define SSD20XD_PINNAME_TTL25 "ttl25"
+#define SSD20XD_PINNAME_TTL26 "ttl26"
+#define SSD20XD_PINNAME_TTL27 "ttl27"
+
+#define SSD20XD_TTL_PINNAMES SSD20XD_PINNAME_TTL0, \
+ SSD20XD_PINNAME_TTL1, \
+ SSD20XD_PINNAME_TTL2, \
+ SSD20XD_PINNAME_TTL3, \
+ SSD20XD_PINNAME_TTL4, \
+ SSD20XD_PINNAME_TTL5, \
+ SSD20XD_PINNAME_TTL6, \
+ SSD20XD_PINNAME_TTL7, \
+ SSD20XD_PINNAME_TTL8, \
+ SSD20XD_PINNAME_TTL9, \
+ SSD20XD_PINNAME_TTL10, \
+ SSD20XD_PINNAME_TTL11, \
+ SSD20XD_PINNAME_TTL12, \
+ SSD20XD_PINNAME_TTL13, \
+ SSD20XD_PINNAME_TTL14, \
+ SSD20XD_PINNAME_TTL15, \
+ SSD20XD_PINNAME_TTL16, \
+ SSD20XD_PINNAME_TTL17, \
+ SSD20XD_PINNAME_TTL18, \
+ SSD20XD_PINNAME_TTL19, \
+ SSD20XD_PINNAME_TTL20, \
+ SSD20XD_PINNAME_TTL21, \
+ SSD20XD_PINNAME_TTL22, \
+ SSD20XD_PINNAME_TTL23, \
+ SSD20XD_PINNAME_TTL24, \
+ SSD20XD_PINNAME_TTL25, \
+ SSD20XD_PINNAME_TTL26, \
+ SSD20XD_PINNAME_TTL27
+
+#define SSD20XD_TTL_OFFSET_TTL0 0x80
+#define SSD20XD_TTL_OFFSET_TTL1 0x84
+#define SSD20XD_TTL_OFFSET_TTL2 0x88
+#define SSD20XD_TTL_OFFSET_TTL3 0x8c
+#define SSD20XD_TTL_OFFSET_TTL4 0x90
+#define SSD20XD_TTL_OFFSET_TTL5 0x94
+#define SSD20XD_TTL_OFFSET_TTL6 0x98
+#define SSD20XD_TTL_OFFSET_TTL7 0x9c
+#define SSD20XD_TTL_OFFSET_TTL8 0xa0
+#define SSD20XD_TTL_OFFSET_TTL9 0xa4
+#define SSD20XD_TTL_OFFSET_TTL10 0xa8
+#define SSD20XD_TTL_OFFSET_TTL11 0xac
+#define SSD20XD_TTL_OFFSET_TTL12 0xb0
+#define SSD20XD_TTL_OFFSET_TTL13 0xb4
+#define SSD20XD_TTL_OFFSET_TTL14 0xb8
+#define SSD20XD_TTL_OFFSET_TTL15 0xbc
+#define SSD20XD_TTL_OFFSET_TTL16 0xc0
+#define SSD20XD_TTL_OFFSET_TTL17 0xc4
+#define SSD20XD_TTL_OFFSET_TTL18 0xc8
+#define SSD20XD_TTL_OFFSET_TTL19 0xcc
+#define SSD20XD_TTL_OFFSET_TTL20 0xd0
+#define SSD20XD_TTL_OFFSET_TTL21 0xd4
+#define SSD20XD_TTL_OFFSET_TTL22 0xd8
+#define SSD20XD_TTL_OFFSET_TTL23 0xdc
+#define SSD20XD_TTL_OFFSET_TTL24 0xe0
+#define SSD20XD_TTL_OFFSET_TTL25 0xe4
+#define SSD20XD_TTL_OFFSET_TTL26 0xe8
+#define SSD20XD_TTL_OFFSET_TTL27 0xec
+
+#define SSD20XD_TTL_OFFSETS SSD20XD_TTL_OFFSET_TTL0, \
+ SSD20XD_TTL_OFFSET_TTL1, \
+ SSD20XD_TTL_OFFSET_TTL2, \
+ SSD20XD_TTL_OFFSET_TTL3, \
+ SSD20XD_TTL_OFFSET_TTL4, \
+ SSD20XD_TTL_OFFSET_TTL5, \
+ SSD20XD_TTL_OFFSET_TTL6, \
+ SSD20XD_TTL_OFFSET_TTL7, \
+ SSD20XD_TTL_OFFSET_TTL8, \
+ SSD20XD_TTL_OFFSET_TTL9, \
+ SSD20XD_TTL_OFFSET_TTL10, \
+ SSD20XD_TTL_OFFSET_TTL11, \
+ SSD20XD_TTL_OFFSET_TTL12, \
+ SSD20XD_TTL_OFFSET_TTL13, \
+ SSD20XD_TTL_OFFSET_TTL14, \
+ SSD20XD_TTL_OFFSET_TTL15, \
+ SSD20XD_TTL_OFFSET_TTL16, \
+ SSD20XD_TTL_OFFSET_TTL17, \
+ SSD20XD_TTL_OFFSET_TTL18, \
+ SSD20XD_TTL_OFFSET_TTL19, \
+ SSD20XD_TTL_OFFSET_TTL20, \
+ SSD20XD_TTL_OFFSET_TTL21, \
+ SSD20XD_TTL_OFFSET_TTL22, \
+ SSD20XD_TTL_OFFSET_TTL23, \
+ SSD20XD_TTL_OFFSET_TTL24, \
+ SSD20XD_TTL_OFFSET_TTL25, \
+ SSD20XD_TTL_OFFSET_TTL26, \
+ SSD20XD_TTL_OFFSET_TTL27
+
+/* On the ssd20xd the two normal uarts have dedicated pins */
+#define SSD20XD_PINNAME_UART0_RX "uart0_rx"
+#define SSD20XD_PINNAME_UART0_TX "uart0_tx"
+
+#define SSD20XD_UART0_NAMES \
+ SSD20XD_PINNAME_UART0_RX, \
+ SSD20XD_PINNAME_UART0_TX
+
+#define SSD20XD_PINNAME_UART1_RX "uart1_rx"
+#define SSD20XD_PINNAME_UART1_TX "uart1_tx"
+
+#define SSD20XD_UART1_NAMES \
+ SSD20XD_PINNAME_UART1_RX, \
+ SSD20XD_PINNAME_UART1_TX
+
+#define SSD20XD_OFF_UART0_RX 0x60
+#define SSD20XD_OFF_UART0_TX 0x64
+
+#define SSD20XD_UART0_OFFSETS \
+ SSD20XD_OFF_UART0_RX, \
+ SSD20XD_OFF_UART0_TX
+
+#define SSD20XD_OFF_UART1_RX 0x68
+#define SSD20XD_OFF_UART1_TX 0x6c
+
+#define SSD20XD_UART1_OFFSETS \
+ SSD20XD_OFF_UART1_RX, \
+ SSD20XD_OFF_UART1_TX
+
+/*
+ * ssd20x has the same pin names but different ordering
+ * of the registers that control the gpio.
+ */
+#define SSD20XD_OFF_SD_D0 0x140
+#define SSD20XD_OFF_SD_D1 0x144
+#define SSD20XD_OFF_SD_D2 0x148
+#define SSD20XD_OFF_SD_D3 0x14c
+#define SSD20XD_OFF_SD_CMD 0x150
+#define SSD20XD_OFF_SD_CLK 0x154
+
+#define SSD20XD_SD_OFFSETS SSD20XD_OFF_SD_CLK, \
+ SSD20XD_OFF_SD_CMD, \
+ SSD20XD_OFF_SD_D0, \
+ SSD20XD_OFF_SD_D1, \
+ SSD20XD_OFF_SD_D2, \
+ SSD20XD_OFF_SD_D3
+
+static const char * const ssd20xd_names[] = {
+ FUART_NAMES,
+ SD_NAMES,
+ SSD20XD_UART0_NAMES,
+ SSD20XD_UART1_NAMES,
+ SSD20XD_TTL_PINNAMES,
+ SSD20XD_GPIO_NAMES,
+};
+
+static const unsigned int ssd20xd_offsets[] = {
+ FUART_OFFSETS,
+ SSD20XD_SD_OFFSETS,
+ SSD20XD_UART0_OFFSETS,
+ SSD20XD_UART1_OFFSETS,
+ SSD20XD_TTL_OFFSETS,
+ SSD20XD_GPIO_OFFSETS,
+};
+
+MSC313_GPIO_CHIPDATA(ssd20xd);
#endif
struct msc313_gpio {
@@ -412,6 +669,10 @@ static const struct of_device_id msc313_gpio_of_match[] = {
.compatible = "mstar,msc313-gpio",
.data = &msc313_data,
},
+ {
+ .compatible = "sstar,ssd20xd-gpio",
+ .data = &ssd20xd_data,
+ },
#endif
{ }
};
--
2.32.0
next prev parent reply other threads:[~2021-07-17 4:57 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-17 4:56 [PATCH 00/10] gpio: msc313: Add gpio support for ssd20xd Daniel Palmer
2021-07-17 4:56 ` [PATCH 01/10] dt-bindings: gpio: msc313: Add compatible " Daniel Palmer
2021-07-22 3:08 ` Rob Herring
2021-07-30 10:09 ` Linus Walleij
2021-07-17 4:56 ` [PATCH 02/10] dt-bindings: gpio: msc313: Add offsets " Daniel Palmer
2021-07-22 3:08 ` Rob Herring
2021-07-30 10:09 ` Linus Walleij
2021-07-17 4:56 ` [PATCH 03/10] gpio: msc313: Code clean ups Daniel Palmer
2021-07-30 10:10 ` Linus Walleij
2021-07-17 4:56 ` Daniel Palmer [this message]
2021-07-30 10:10 ` [PATCH 04/10] gpio: msc313: Add support for SSD201 and SSD202D Linus Walleij
2021-07-17 4:56 ` [PATCH 05/10] ARM: dts: mstar: Set gpio compatible for ssd20xd Daniel Palmer
2021-07-30 10:11 ` Linus Walleij
2021-08-03 10:13 ` Romain Perier
2021-07-17 4:56 ` [PATCH 06/10] ARM: dts: mstar: unitv2: Wire up LEDs Daniel Palmer
2021-07-17 4:56 ` [PATCH 07/10] ARM: dts: mstar: unitv2: Add core regulator Daniel Palmer
2021-07-17 4:56 ` [PATCH 08/10] ARM: dts: mstar: unitv2: Add io regulator Daniel Palmer
2021-07-17 4:56 ` [PATCH 09/10] ARM: dts: mstar: unitv2: Add DRAM regulator Daniel Palmer
2021-07-17 4:56 ` [PATCH 10/10] ARM: dts: mstar: unitv2: Add wifi switch Daniel Palmer
2021-07-30 10:12 ` [PATCH 00/10] gpio: msc313: Add gpio support for ssd20xd Linus Walleij
2021-07-30 10:19 ` Daniel Palmer
2021-08-25 11:50 ` Daniel Palmer
2021-09-22 10:20 ` Bartosz Golaszewski
2021-09-22 10:46 ` Daniel Palmer
2021-09-22 10:51 ` Andy Shevchenko
2021-09-22 12:50 ` Bartosz Golaszewski
2021-09-22 12:56 ` Andy Shevchenko
2021-09-22 14:52 ` Daniel Palmer
2021-09-22 23:50 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210717045627.1739959-5-daniel@0x0f.com \
--to=daniel@0x0f.com \
--cc=devicetree@vger.kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=romain.perier@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).