linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v4 00/12] Add OTG mode support to Tegra USB PHY, SMB347 and Nexus 7
@ 2021-07-17 12:11 Dmitry Osipenko
  2021-07-17 12:11 ` [PATCH v4 01/12] dt-bindings: phy: tegra20-usb-phy: Convert to schema Dmitry Osipenko
                   ` (11 more replies)
  0 siblings, 12 replies; 15+ messages in thread
From: Dmitry Osipenko @ 2021-07-17 12:11 UTC (permalink / raw)
  To: Thierry Reding, Jonathan Hunter, Mark Brown, Rob Herring,
	Sebastian Reichel, Peter Chen, Greg Kroah-Hartman, Felipe Balbi,
	David Heidelberg
  Cc: devicetree, linux-pm, linux-usb, linux-kernel, linux-tegra

Hi,

This series adds USB OTG mode support to the NVIDIA Tegra USB PHY driver,
SMB347 charger driver and Nexus 7 tablet.

Changelog:

v4: - Added r-b from Rob Herring.

    - Added unevaluatedProperties into SMB binding for VBUS regulator,
      which was Requested by Rob Herring.

    - Added cell to nvidia,pmc phandle instead of explicit h/w ID
      property. Requested by Rob Herring.

    - Added stack trace to commit message and ack from Peter Chen to
      OTG FSM patch.

v3: - Further improved interrupt handling in the PHY driver by removing
      assumption that interrupt is enabled by the CI driver at the time
      of set_wakeup() invocation, which makes this function a bit more
      universal.

v2: - The PHY's interrupt is now enabled from PHY's set_wakeup() callback.
      It prevents getting a spurious interrupt during the CI driver probe
      time.

Dmitry Osipenko (12):
  dt-bindings: phy: tegra20-usb-phy: Convert to schema
  dt-bindings: phy: tegra20-usb-phy: Document properties needed for OTG
    mode
  soc/tegra: pmc: Expose USB regmap to all SoCs
  usb: phy: tegra: Support OTG mode programming
  usb: otg-fsm: Fix hrtimer list corruption
  dt-bindings: power: supply: smb347-charger: Document USB VBUS
    regulator
  power: supply: smb347-charger: Make smb347_set_writable() IRQ-safe
  power: supply: smb347-charger: Remove caching of charger state
  power: supply: smb347-charger: Implement USB VBUS regulator
  ARM: tegra: Add new properties to USB PHY device-tree nodes
  ARM: tegra: nexus7: Enable USB OTG mode
  arm64: tegra132: Add new properties to USB PHY device-tree node

 .../bindings/phy/nvidia,tegra20-usb-phy.txt   |  74 ----
 .../bindings/phy/nvidia,tegra20-usb-phy.yaml  | 373 ++++++++++++++++++
 .../power/supply/summit,smb347-charger.yaml   |  30 ++
 arch/arm/boot/dts/tegra114.dtsi               |   4 +
 arch/arm/boot/dts/tegra124.dtsi               |   6 +
 arch/arm/boot/dts/tegra20.dtsi                |   6 +
 .../tegra30-asus-nexus7-grouper-common.dtsi   |  25 +-
 arch/arm/boot/dts/tegra30.dtsi                |   6 +
 arch/arm64/boot/dts/nvidia/tegra132.dtsi      |   6 +
 drivers/power/supply/Kconfig                  |   1 +
 drivers/power/supply/smb347-charger.c         | 259 +++++++++++-
 drivers/soc/tegra/pmc.c                       |   6 +-
 drivers/usb/common/usb-otg-fsm.c              |   6 +-
 drivers/usb/phy/phy-tegra-usb.c               | 197 ++++++++-
 .../dt-bindings/power/summit,smb347-charger.h |   4 +
 include/linux/usb/otg-fsm.h                   |   1 +
 include/linux/usb/tegra_usb_phy.h             |   5 +
 17 files changed, 905 insertions(+), 104 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.txt
 create mode 100644 Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.yaml

-- 
2.32.0


^ permalink raw reply	[flat|nested] 15+ messages in thread

* [PATCH v4 01/12] dt-bindings: phy: tegra20-usb-phy: Convert to schema
  2021-07-17 12:11 [PATCH v4 00/12] Add OTG mode support to Tegra USB PHY, SMB347 and Nexus 7 Dmitry Osipenko
@ 2021-07-17 12:11 ` Dmitry Osipenko
  2021-07-17 12:11 ` [PATCH v4 02/12] dt-bindings: phy: tegra20-usb-phy: Document properties needed for OTG mode Dmitry Osipenko
                   ` (10 subsequent siblings)
  11 siblings, 0 replies; 15+ messages in thread
From: Dmitry Osipenko @ 2021-07-17 12:11 UTC (permalink / raw)
  To: Thierry Reding, Jonathan Hunter, Mark Brown, Rob Herring,
	Sebastian Reichel, Peter Chen, Greg Kroah-Hartman, Felipe Balbi,
	David Heidelberg
  Cc: devicetree, linux-pm, linux-usb, linux-kernel, linux-tegra

Convert NVIDIA Tegra20 USB PHY binding to schema.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 .../bindings/phy/nvidia,tegra20-usb-phy.txt   |  74 ----
 .../bindings/phy/nvidia,tegra20-usb-phy.yaml  | 357 ++++++++++++++++++
 2 files changed, 357 insertions(+), 74 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.txt
 create mode 100644 Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.yaml

diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.txt b/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.txt
deleted file mode 100644
index 1aa6f2674af5..000000000000
--- a/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.txt
+++ /dev/null
@@ -1,74 +0,0 @@
-Tegra SOC USB PHY
-
-The device node for Tegra SOC USB PHY:
-
-Required properties :
- - compatible : For Tegra20, must contain "nvidia,tegra20-usb-phy".
-   For Tegra30, must contain "nvidia,tegra30-usb-phy".  Otherwise, must contain
-   "nvidia,<chip>-usb-phy" plus at least one of the above, where <chip> is
-   tegra114, tegra124, tegra132, or tegra210.
- - reg : Defines the following set of registers, in the order listed:
-   - The PHY's own register set.
-     Always present.
-   - The register set of the PHY containing the UTMI pad control registers.
-     Present if-and-only-if phy_type == utmi.
- - phy_type : Should be one of "utmi", "ulpi" or "hsic".
- - clocks : Defines the clocks listed in the clock-names property.
- - clock-names : The following clock names must be present:
-   - reg: The clock needed to access the PHY's own registers. This is the
-     associated EHCI controller's clock. Always present.
-   - pll_u: PLL_U. Always present.
-   - timer: The timeout clock (clk_m). Present if phy_type == utmi.
-   - utmi-pads: The clock needed to access the UTMI pad control registers.
-     Present if phy_type == utmi.
-   - ulpi-link: The clock Tegra provides to the ULPI PHY (usually pad DAP_MCLK2
-     with pad group aka "nvidia,pins" cdev2 and pin mux option config aka
-     "nvidia,function" pllp_out4).
-     Present if phy_type == ulpi, and ULPI link mode is in use.
- - resets : Must contain an entry for each entry in reset-names.
-   See ../reset/reset.txt for details.
- - reset-names : Must include the following entries:
-   - usb: The PHY's own reset signal.
-   - utmi-pads: The reset of the PHY containing the chip-wide UTMI pad control
-     registers. Required even if phy_type == ulpi.
-
-Required properties for phy_type == ulpi:
-  - nvidia,phy-reset-gpio : The GPIO used to reset the PHY.
-
-Required PHY timing params for utmi phy, for all chips:
-  - nvidia,hssync-start-delay : Number of 480 Mhz clock cycles to wait before
-    start of sync launches RxActive
-  - nvidia,elastic-limit : Variable FIFO Depth of elastic input store
-  - nvidia,idle-wait-delay : Number of 480 Mhz clock cycles of idle to wait
-    before declare IDLE.
-  - nvidia,term-range-adj : Range adjusment on terminations
-  - Either one of the following for HS driver output control:
-    - nvidia,xcvr-setup : integer, uses the provided value.
-    - nvidia,xcvr-setup-use-fuses : boolean, indicates that the value is read
-      from the on-chip fuses
-    If both are provided, nvidia,xcvr-setup-use-fuses takes precedence.
-  - nvidia,xcvr-lsfslew : LS falling slew rate control.
-  - nvidia,xcvr-lsrslew :  LS rising slew rate control.
-
-Required PHY timing params for utmi phy, only on Tegra30 and above:
-  - nvidia,xcvr-hsslew : HS slew rate control.
-  - nvidia,hssquelch-level : HS squelch detector level.
-  - nvidia,hsdiscon-level : HS disconnect detector level.
-
-Optional properties:
-  - nvidia,has-legacy-mode : boolean indicates whether this controller can
-    operate in legacy mode (as APX 2500 / 2600). In legacy mode some
-    registers are accessed through the APB_MISC base address instead of
-    the USB controller.
-  - nvidia,is-wired : boolean. Indicates whether we can do certain kind of power
-    optimizations for the devices that are always connected. e.g. modem.
-  - dr_mode : dual role mode. Indicates the working mode for the PHY. Can be
-    "host", "peripheral", or "otg". Defaults to "host" if not defined.
-      host means this is a host controller
-      peripheral means it is device controller
-      otg means it can operate as either ("on the go")
-  - nvidia,has-utmi-pad-registers : boolean indicates whether this controller
-    contains the UTMI pad control registers common to all USB controllers.
-
-VBUS control (required for dr_mode == otg, optional for dr_mode == host):
-  - vbus-supply: regulator for VBUS
diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.yaml b/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.yaml
new file mode 100644
index 000000000000..593187234e6a
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.yaml
@@ -0,0 +1,357 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/nvidia,tegra20-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra USB PHY
+
+maintainers:
+  - Dmitry Osipenko <digetx@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - nvidia,tegra124-usb-phy
+              - nvidia,tegra114-usb-phy
+          - enum:
+              - nvidia,tegra30-usb-phy
+      - items:
+          - enum:
+              - nvidia,tegra30-usb-phy
+              - nvidia,tegra20-usb-phy
+
+  reg:
+    minItems: 1
+    maxItems: 2
+    description: |
+      PHY0 and PHY2 share power and ground, PHY0 contains shared registers.
+      PHY0 and PHY2 must specify two register sets, where the first set is
+      PHY own registers and the second set is the PHY0 registers.
+
+  clocks:
+    anyOf:
+      - items:
+          - description: Registers clock
+          - description: Main PHY clock
+
+      - items:
+          - description: Registers clock
+          - description: Main PHY clock
+          - description: ULPI PHY clock
+
+      - items:
+          - description: Registers clock
+          - description: Main PHY clock
+          - description: UTMI pads control registers clock
+
+      - items:
+          - description: Registers clock
+          - description: Main PHY clock
+          - description: UTMI timeout clock
+          - description: UTMI pads control registers clock
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: reg
+          - const: pll_u
+
+      - items:
+          - const: reg
+          - const: pll_u
+          - const: ulpi-link
+
+      - items:
+          - const: reg
+          - const: pll_u
+          - const: utmi-pads
+
+      - items:
+          - const: reg
+          - const: pll_u
+          - const: timer
+          - const: utmi-pads
+
+  resets:
+    oneOf:
+      - maxItems: 1
+        description: PHY reset
+
+      - items:
+          - description: PHY reset
+          - description: UTMI pads reset
+
+  reset-names:
+    oneOf:
+      - const: usb
+
+      - items:
+          - const: usb
+          - const: utmi-pads
+
+  "#phy-cells":
+    const: 0
+
+  phy_type:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [utmi, ulpi, hsic]
+
+  dr_mode:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [host, peripheral, otg]
+    default: host
+
+  vbus-supply:
+    description: Regulator controlling USB VBUS.
+
+  nvidia,has-legacy-mode:
+    description: |
+      Indicates whether this controller can operate in legacy mode
+      (as APX 2500 / 2600). In legacy mode some registers are accessed
+      through the APB_MISC base address instead of the USB controller.
+    type: boolean
+
+  nvidia,is-wired:
+    description: |
+      Indicates whether we can do certain kind of power optimizations for
+      the devices that are always connected. e.g. modem.
+    type: boolean
+
+  nvidia,has-utmi-pad-registers:
+    description: |
+      Indicates whether this controller contains the UTMI pad control
+      registers common to all USB controllers.
+    type: boolean
+
+  nvidia,hssync-start-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 31
+    description: |
+      Number of 480 MHz clock cycles to wait before start of sync launches
+      RxActive.
+
+  nvidia,elastic-limit:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 31
+    description: Variable FIFO Depth of elastic input store.
+
+  nvidia,idle-wait-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 31
+    description: |
+      Number of 480 MHz clock cycles of idle to wait before declare IDLE.
+
+  nvidia,term-range-adj:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description: Range adjustment on terminations.
+
+  nvidia,xcvr-setup:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 127
+    description: Input of XCVR cell, HS driver output control.
+
+  nvidia,xcvr-setup-use-fuses:
+    description: Indicates that the value is read from the on-chip fuses.
+    type: boolean
+
+  nvidia,xcvr-lsfslew:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+    description: LS falling slew rate control.
+
+  nvidia,xcvr-lsrslew:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+    description: LS rising slew rate control.
+
+  nvidia,xcvr-hsslew:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 511
+    description: HS slew rate control.
+
+  nvidia,hssquelch-level:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+    description: HS squelch detector level.
+
+  nvidia,hsdiscon-level:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    description: HS disconnect detector level.
+
+  nvidia,phy-reset-gpio:
+    maxItems: 1
+    description: GPIO used to reset the PHY.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - "#phy-cells"
+  - phy_type
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        phy_type:
+          const: utmi
+
+    then:
+      properties:
+        reg:
+          minItems: 2
+          maxItems: 2
+
+        resets:
+          maxItems: 2
+
+        reset-names:
+          maxItems: 2
+
+      required:
+        - nvidia,hssync-start-delay
+        - nvidia,elastic-limit
+        - nvidia,idle-wait-delay
+        - nvidia,term-range-adj
+        - nvidia,xcvr-lsfslew
+        - nvidia,xcvr-lsrslew
+
+      anyOf:
+        - required: ["nvidia,xcvr-setup"]
+        - required: ["nvidia,xcvr-setup-use-fuses"]
+
+      if:
+        properties:
+          compatible:
+            contains:
+              const: nvidia,tegra30-usb-phy
+
+      then:
+        properties:
+          clocks:
+            maxItems: 3
+
+          clock-names:
+            items:
+              - const: reg
+              - const: pll_u
+              - const: utmi-pads
+
+        required:
+          - nvidia,xcvr-hsslew
+          - nvidia,hssquelch-level
+          - nvidia,hsdiscon-level
+
+        else:
+          properties:
+            clocks:
+              maxItems: 4
+
+            clock-names:
+              items:
+                - const: reg
+                - const: pll_u
+                - const: timer
+                - const: utmi-pads
+
+  - if:
+      properties:
+        phy_type:
+          const: ulpi
+
+    then:
+      properties:
+        reg:
+          minItems: 1
+          maxItems: 1
+
+        clocks:
+          minItems: 2
+          maxItems: 3
+
+        clock-names:
+          minItems: 2
+          maxItems: 3
+
+          oneOf:
+            - items:
+                - const: reg
+                - const: pll_u
+
+            - items:
+                - const: reg
+                - const: pll_u
+                - const: ulpi-link
+
+        resets:
+          minItems: 1
+          maxItems: 2
+
+        reset-names:
+          minItems: 1
+          maxItems: 2
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra124-car.h>
+
+    usb-phy@7d008000 {
+        compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
+        reg = <0x7d008000 0x4000>,
+              <0x7d000000 0x4000>;
+        phy_type = "utmi";
+        clocks = <&tegra_car TEGRA124_CLK_USB3>,
+                 <&tegra_car TEGRA124_CLK_PLL_U>,
+                 <&tegra_car TEGRA124_CLK_USBD>;
+        clock-names = "reg", "pll_u", "utmi-pads";
+        resets = <&tegra_car 59>, <&tegra_car 22>;
+        reset-names = "usb", "utmi-pads";
+        #phy-cells = <0>;
+        nvidia,hssync-start-delay = <0>;
+        nvidia,idle-wait-delay = <17>;
+        nvidia,elastic-limit = <16>;
+        nvidia,term-range-adj = <6>;
+        nvidia,xcvr-setup = <9>;
+        nvidia,xcvr-lsfslew = <0>;
+        nvidia,xcvr-lsrslew = <3>;
+        nvidia,hssquelch-level = <2>;
+        nvidia,hsdiscon-level = <5>;
+        nvidia,xcvr-hsslew = <12>;
+    };
+
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+
+    usb-phy@c5004000 {
+        compatible = "nvidia,tegra20-usb-phy";
+        reg = <0xc5004000 0x4000>;
+        phy_type = "ulpi";
+        clocks = <&tegra_car TEGRA20_CLK_USB2>,
+                 <&tegra_car TEGRA20_CLK_PLL_U>,
+                 <&tegra_car TEGRA20_CLK_CDEV2>;
+        clock-names = "reg", "pll_u", "ulpi-link";
+        resets = <&tegra_car 58>, <&tegra_car 22>;
+        reset-names = "usb", "utmi-pads";
+        #phy-cells = <0>;
+    };
-- 
2.32.0


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH v4 02/12] dt-bindings: phy: tegra20-usb-phy: Document properties needed for OTG mode
  2021-07-17 12:11 [PATCH v4 00/12] Add OTG mode support to Tegra USB PHY, SMB347 and Nexus 7 Dmitry Osipenko
  2021-07-17 12:11 ` [PATCH v4 01/12] dt-bindings: phy: tegra20-usb-phy: Convert to schema Dmitry Osipenko
@ 2021-07-17 12:11 ` Dmitry Osipenko
  2021-07-17 12:11 ` [PATCH v4 03/12] soc/tegra: pmc: Expose USB regmap to all SoCs Dmitry Osipenko
                   ` (9 subsequent siblings)
  11 siblings, 0 replies; 15+ messages in thread
From: Dmitry Osipenko @ 2021-07-17 12:11 UTC (permalink / raw)
  To: Thierry Reding, Jonathan Hunter, Mark Brown, Rob Herring,
	Sebastian Reichel, Peter Chen, Greg Kroah-Hartman, Felipe Balbi,
	David Heidelberg
  Cc: devicetree, linux-pm, linux-usb, linux-kernel, linux-tegra

In order to support OTG mode we need these new properties:

	- interrupt
	- nvidia,pmc

Add the new properties to the binding.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 .../bindings/phy/nvidia,tegra20-usb-phy.yaml     | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.yaml b/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.yaml
index 593187234e6a..dfde0eaf66e1 100644
--- a/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.yaml
@@ -77,6 +77,9 @@ properties:
           - const: timer
           - const: utmi-pads
 
+  interrupts:
+    maxItems: 1
+
   resets:
     oneOf:
       - maxItems: 1
@@ -199,6 +202,15 @@ properties:
     maxItems: 1
     description: GPIO used to reset the PHY.
 
+  nvidia,pmc:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to Power Management controller.
+          - description: USB controller ID.
+    description:
+      Phandle to Power Management controller.
+
 required:
   - compatible
   - reg
@@ -320,6 +332,7 @@ examples:
         compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
         reg = <0x7d008000 0x4000>,
               <0x7d000000 0x4000>;
+        interrupts = <0 97 4>;
         phy_type = "utmi";
         clocks = <&tegra_car TEGRA124_CLK_USB3>,
                  <&tegra_car TEGRA124_CLK_PLL_U>,
@@ -338,6 +351,7 @@ examples:
         nvidia,hssquelch-level = <2>;
         nvidia,hsdiscon-level = <5>;
         nvidia,xcvr-hsslew = <12>;
+        nvidia,pmc = <&tegra_pmc 2>;
     };
 
   - |
@@ -346,6 +360,7 @@ examples:
     usb-phy@c5004000 {
         compatible = "nvidia,tegra20-usb-phy";
         reg = <0xc5004000 0x4000>;
+        interrupts = <0 21 4>;
         phy_type = "ulpi";
         clocks = <&tegra_car TEGRA20_CLK_USB2>,
                  <&tegra_car TEGRA20_CLK_PLL_U>,
@@ -354,4 +369,5 @@ examples:
         resets = <&tegra_car 58>, <&tegra_car 22>;
         reset-names = "usb", "utmi-pads";
         #phy-cells = <0>;
+        nvidia,pmc = <&tegra_pmc 1>;
     };
-- 
2.32.0


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH v4 03/12] soc/tegra: pmc: Expose USB regmap to all SoCs
  2021-07-17 12:11 [PATCH v4 00/12] Add OTG mode support to Tegra USB PHY, SMB347 and Nexus 7 Dmitry Osipenko
  2021-07-17 12:11 ` [PATCH v4 01/12] dt-bindings: phy: tegra20-usb-phy: Convert to schema Dmitry Osipenko
  2021-07-17 12:11 ` [PATCH v4 02/12] dt-bindings: phy: tegra20-usb-phy: Document properties needed for OTG mode Dmitry Osipenko
@ 2021-07-17 12:11 ` Dmitry Osipenko
  2021-07-17 12:11 ` [PATCH v4 04/12] usb: phy: tegra: Support OTG mode programming Dmitry Osipenko
                   ` (8 subsequent siblings)
  11 siblings, 0 replies; 15+ messages in thread
From: Dmitry Osipenko @ 2021-07-17 12:11 UTC (permalink / raw)
  To: Thierry Reding, Jonathan Hunter, Mark Brown, Rob Herring,
	Sebastian Reichel, Peter Chen, Greg Kroah-Hartman, Felipe Balbi,
	David Heidelberg
  Cc: devicetree, linux-pm, linux-usb, linux-kernel, linux-tegra

All Tegra SoCs prior to Tegra186 have USB power controls within the Power
Management controller. These controls need to be configured by USB driver.
Expose the regmap to these SoCs.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/soc/tegra/pmc.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c
index 3d31abb0ed71..5085106c4f53 100644
--- a/drivers/soc/tegra/pmc.c
+++ b/drivers/soc/tegra/pmc.c
@@ -3202,7 +3202,7 @@ static const struct tegra_pmc_soc tegra20_pmc_soc = {
 	.pmc_clks_data = NULL,
 	.num_pmc_clks = 0,
 	.has_blink_output = true,
-	.has_usb_sleepwalk = false,
+	.has_usb_sleepwalk = true,
 };
 
 static const char * const tegra30_powergates[] = {
@@ -3263,7 +3263,7 @@ static const struct tegra_pmc_soc tegra30_pmc_soc = {
 	.pmc_clks_data = tegra_pmc_clks_data,
 	.num_pmc_clks = ARRAY_SIZE(tegra_pmc_clks_data),
 	.has_blink_output = true,
-	.has_usb_sleepwalk = false,
+	.has_usb_sleepwalk = true,
 };
 
 static const char * const tegra114_powergates[] = {
@@ -3320,7 +3320,7 @@ static const struct tegra_pmc_soc tegra114_pmc_soc = {
 	.pmc_clks_data = tegra_pmc_clks_data,
 	.num_pmc_clks = ARRAY_SIZE(tegra_pmc_clks_data),
 	.has_blink_output = true,
-	.has_usb_sleepwalk = false,
+	.has_usb_sleepwalk = true,
 };
 
 static const char * const tegra124_powergates[] = {
-- 
2.32.0


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH v4 04/12] usb: phy: tegra: Support OTG mode programming
  2021-07-17 12:11 [PATCH v4 00/12] Add OTG mode support to Tegra USB PHY, SMB347 and Nexus 7 Dmitry Osipenko
                   ` (2 preceding siblings ...)
  2021-07-17 12:11 ` [PATCH v4 03/12] soc/tegra: pmc: Expose USB regmap to all SoCs Dmitry Osipenko
@ 2021-07-17 12:11 ` Dmitry Osipenko
  2021-07-17 12:11 ` [PATCH v4 05/12] usb: otg-fsm: Fix hrtimer list corruption Dmitry Osipenko
                   ` (7 subsequent siblings)
  11 siblings, 0 replies; 15+ messages in thread
From: Dmitry Osipenko @ 2021-07-17 12:11 UTC (permalink / raw)
  To: Thierry Reding, Jonathan Hunter, Mark Brown, Rob Herring,
	Sebastian Reichel, Peter Chen, Greg Kroah-Hartman, Felipe Balbi,
	David Heidelberg
  Cc: devicetree, linux-pm, linux-usb, linux-kernel, linux-tegra

Support programming USB PHY into OTG mode.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/usb/phy/phy-tegra-usb.c   | 197 +++++++++++++++++++++++++++++-
 include/linux/usb/tegra_usb_phy.h |   5 +
 2 files changed, 197 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c
index c0f432d509aa..d6197a462749 100644
--- a/drivers/usb/phy/phy-tegra-usb.c
+++ b/drivers/usb/phy/phy-tegra-usb.c
@@ -63,6 +63,10 @@
 #define   A_VBUS_VLD_WAKEUP_EN			BIT(30)
 
 #define USB_PHY_VBUS_WAKEUP_ID			0x408
+#define   ID_INT_EN				BIT(0)
+#define   ID_CHG_DET				BIT(1)
+#define   VBUS_WAKEUP_INT_EN			BIT(8)
+#define   VBUS_WAKEUP_CHG_DET			BIT(9)
 #define   VBUS_WAKEUP_STS			BIT(10)
 #define   VBUS_WAKEUP_WAKEUP_EN			BIT(30)
 
@@ -158,6 +162,10 @@
 #define   USB_USBMODE_HOST			(3 << 0)
 #define   USB_USBMODE_DEVICE			(2 << 0)
 
+#define PMC_USB_AO				0xf0
+#define   VBUS_WAKEUP_PD_P0			BIT(2)
+#define   ID_PD_P0				BIT(3)
+
 static DEFINE_SPINLOCK(utmip_pad_lock);
 static unsigned int utmip_pad_count;
 
@@ -533,13 +541,14 @@ static int utmi_phy_power_on(struct tegra_usb_phy *phy)
 	val &= ~USB_WAKE_ON_RESUME_EN;
 	writel_relaxed(val, base + USB_SUSP_CTRL);
 
-	if (phy->mode == USB_DR_MODE_PERIPHERAL) {
+	if (phy->mode != USB_DR_MODE_HOST) {
 		val = readl_relaxed(base + USB_SUSP_CTRL);
 		val &= ~(USB_WAKE_ON_CNNT_EN_DEV | USB_WAKE_ON_DISCON_EN_DEV);
 		writel_relaxed(val, base + USB_SUSP_CTRL);
 
 		val = readl_relaxed(base + USB_PHY_VBUS_WAKEUP_ID);
 		val &= ~VBUS_WAKEUP_WAKEUP_EN;
+		val &= ~(ID_CHG_DET | VBUS_WAKEUP_CHG_DET);
 		writel_relaxed(val, base + USB_PHY_VBUS_WAKEUP_ID);
 
 		val = readl_relaxed(base + USB_PHY_VBUS_SENSORS);
@@ -687,9 +696,10 @@ static int utmi_phy_power_off(struct tegra_usb_phy *phy)
 		 * Ask VBUS sensor to generate wake event once cable is
 		 * connected.
 		 */
-		if (phy->mode == USB_DR_MODE_PERIPHERAL) {
+		if (phy->mode != USB_DR_MODE_HOST) {
 			val = readl_relaxed(base + USB_PHY_VBUS_WAKEUP_ID);
 			val |= VBUS_WAKEUP_WAKEUP_EN;
+			val &= ~(ID_CHG_DET | VBUS_WAKEUP_CHG_DET);
 			writel_relaxed(val, base + USB_PHY_VBUS_WAKEUP_ID);
 
 			val = readl_relaxed(base + USB_PHY_VBUS_SENSORS);
@@ -904,26 +914,146 @@ static void tegra_usb_phy_shutdown(struct usb_phy *u_phy)
 	phy->freq = NULL;
 }
 
+static irqreturn_t tegra_usb_phy_isr(int irq, void *data)
+{
+	u32 val, int_mask = ID_CHG_DET | VBUS_WAKEUP_CHG_DET;
+	struct tegra_usb_phy *phy = data;
+	void __iomem *base = phy->regs;
+
+	/*
+	 * The PHY interrupt also wakes the USB controller driver since
+	 * interrupt is shared. We don't do anything in the PHY driver,
+	 * so just clear the interrupt.
+	 */
+	val = readl_relaxed(base + USB_PHY_VBUS_WAKEUP_ID);
+	writel_relaxed(val, base + USB_PHY_VBUS_WAKEUP_ID);
+
+	return val & int_mask ? IRQ_HANDLED : IRQ_NONE;
+}
+
 static int tegra_usb_phy_set_wakeup(struct usb_phy *u_phy, bool enable)
 {
 	struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy);
+	void __iomem *base = phy->regs;
+	int ret = 0;
+	u32 val;
+
+	if (phy->wakeup_enabled && phy->mode != USB_DR_MODE_HOST &&
+	    phy->irq > 0) {
+		disable_irq(phy->irq);
+
+		val = readl_relaxed(base + USB_PHY_VBUS_WAKEUP_ID);
+		val &= ~(ID_INT_EN | VBUS_WAKEUP_INT_EN);
+		writel_relaxed(val, base + USB_PHY_VBUS_WAKEUP_ID);
+
+		enable_irq(phy->irq);
+
+		free_irq(phy->irq, phy);
+
+		phy->wakeup_enabled = false;
+	}
+
+	if (enable && phy->mode != USB_DR_MODE_HOST && phy->irq > 0) {
+		ret = request_irq(phy->irq, tegra_usb_phy_isr, IRQF_SHARED,
+				  dev_name(phy->u_phy.dev), phy);
+		if (!ret) {
+			disable_irq(phy->irq);
+
+			/*
+			 * USB clock will be resumed once wake event will be
+			 * generated.  The ID-change event requires to have
+			 * interrupts enabled, otherwise it won't be generated.
+			 */
+			val = readl_relaxed(base + USB_PHY_VBUS_WAKEUP_ID);
+			val |= ID_INT_EN | VBUS_WAKEUP_INT_EN;
+			writel_relaxed(val, base + USB_PHY_VBUS_WAKEUP_ID);
+
+			enable_irq(phy->irq);
+		} else {
+			dev_err(phy->u_phy.dev,
+				"Failed to request interrupt: %d", ret);
+			enable = false;
+		}
+	}
 
 	phy->wakeup_enabled = enable;
 
-	return 0;
+	return ret;
 }
 
 static int tegra_usb_phy_set_suspend(struct usb_phy *u_phy, int suspend)
 {
 	struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy);
+	int ret;
 
 	if (WARN_ON(!phy->freq))
 		return -EINVAL;
 
+	/*
+	 * PHY is sharing IRQ with the CI driver, hence here we either
+	 * disable interrupt for both PHY and CI or for CI only.  The
+	 * interrupt needs to be disabled while hardware is reprogrammed
+	 * because interrupt touches the programmed registers, and thus,
+	 * there could be a race condition.
+	 */
+	if (phy->irq > 0)
+		disable_irq(phy->irq);
+
 	if (suspend)
-		return tegra_usb_phy_power_off(phy);
+		ret = tegra_usb_phy_power_off(phy);
 	else
-		return tegra_usb_phy_power_on(phy);
+		ret = tegra_usb_phy_power_on(phy);
+
+	if (phy->irq > 0)
+		enable_irq(phy->irq);
+
+	return ret;
+}
+
+static int tegra_usb_phy_configure_pmc(struct tegra_usb_phy *phy)
+{
+	int err, val = 0;
+
+	/* older device-trees don't have PMC regmap */
+	if (!phy->pmc_regmap)
+		return 0;
+
+	/*
+	 * Tegra20 has a different layout of PMC USB register bits and AO is
+	 * enabled by default after system reset on Tegra20, so assume nothing
+	 * to do on Tegra20.
+	 */
+	if (!phy->soc_config->requires_pmc_ao_power_up)
+		return 0;
+
+	/* enable VBUS wake-up detector */
+	if (phy->mode != USB_DR_MODE_HOST)
+		val |= VBUS_WAKEUP_PD_P0 << phy->instance * 4;
+
+	/* enable ID-pin ACC detector for OTG mode switching */
+	if (phy->mode == USB_DR_MODE_OTG)
+		val |= ID_PD_P0 << phy->instance * 4;
+
+	/* disable detectors to reset them */
+	err = regmap_set_bits(phy->pmc_regmap, PMC_USB_AO, val);
+	if (err) {
+		dev_err(phy->u_phy.dev, "Failed to disable PMC AO: %d\n", err);
+		return err;
+	}
+
+	usleep_range(10, 100);
+
+	/* enable detectors */
+	err = regmap_clear_bits(phy->pmc_regmap, PMC_USB_AO, val);
+	if (err) {
+		dev_err(phy->u_phy.dev, "Failed to enable PMC AO: %d\n", err);
+		return err;
+	}
+
+	/* detectors starts to work after 10ms */
+	usleep_range(10000, 15000);
+
+	return 0;
 }
 
 static int tegra_usb_phy_init(struct usb_phy *u_phy)
@@ -967,6 +1097,10 @@ static int tegra_usb_phy_init(struct usb_phy *u_phy)
 			goto disable_vbus;
 	}
 
+	err = tegra_usb_phy_configure_pmc(phy);
+	if (err)
+		goto close_phy;
+
 	err = tegra_usb_phy_power_on(phy);
 	if (err)
 		goto close_phy;
@@ -1135,11 +1269,56 @@ static int utmi_phy_probe(struct tegra_usb_phy *tegra_phy,
 	return 0;
 }
 
+static void tegra_usb_phy_put_pmc_device(void *dev)
+{
+	put_device(dev);
+}
+
+static int tegra_usb_phy_parse_pmc(struct device *dev,
+				   struct tegra_usb_phy *phy)
+{
+	struct platform_device *pmc_pdev;
+	struct of_phandle_args args;
+	int err;
+
+	err = of_parse_phandle_with_fixed_args(dev->of_node, "nvidia,pmc",
+					       1, 0, &args);
+	if (err) {
+		if (err != -ENOENT)
+			return err;
+
+		dev_warn_once(dev, "nvidia,pmc is missing, please update your device-tree\n");
+		return 0;
+	}
+
+	pmc_pdev = of_find_device_by_node(args.np);
+	of_node_put(args.np);
+	if (!pmc_pdev)
+		return -ENODEV;
+
+	err = devm_add_action_or_reset(dev, tegra_usb_phy_put_pmc_device,
+				       &pmc_pdev->dev);
+	if (err)
+		return err;
+
+	if (!platform_get_drvdata(pmc_pdev))
+		return -EPROBE_DEFER;
+
+	phy->pmc_regmap = dev_get_regmap(&pmc_pdev->dev, "usb_sleepwalk");
+	if (!phy->pmc_regmap)
+		return -EINVAL;
+
+	phy->instance = args.args[0];
+
+	return 0;
+}
+
 static const struct tegra_phy_soc_config tegra20_soc_config = {
 	.utmi_pll_config_in_car_module = false,
 	.has_hostpc = false,
 	.requires_usbmode_setup = false,
 	.requires_extra_tuning_parameters = false,
+	.requires_pmc_ao_power_up = false,
 };
 
 static const struct tegra_phy_soc_config tegra30_soc_config = {
@@ -1147,6 +1326,7 @@ static const struct tegra_phy_soc_config tegra30_soc_config = {
 	.has_hostpc = true,
 	.requires_usbmode_setup = true,
 	.requires_extra_tuning_parameters = true,
+	.requires_pmc_ao_power_up = true,
 };
 
 static const struct of_device_id tegra_usb_phy_id_table[] = {
@@ -1172,6 +1352,7 @@ static int tegra_usb_phy_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	tegra_phy->soc_config = of_device_get_match_data(&pdev->dev);
+	tegra_phy->irq = platform_get_irq_optional(pdev, 0);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
@@ -1215,6 +1396,12 @@ static int tegra_usb_phy_probe(struct platform_device *pdev)
 		return err;
 	}
 
+	err = tegra_usb_phy_parse_pmc(&pdev->dev, tegra_phy);
+	if (err) {
+		dev_err_probe(&pdev->dev, err, "Failed to get PMC regmap\n");
+		return err;
+	}
+
 	phy_type = of_usb_get_phy_mode(np);
 	switch (phy_type) {
 	case USBPHY_INTERFACE_MODE_UTMI:
diff --git a/include/linux/usb/tegra_usb_phy.h b/include/linux/usb/tegra_usb_phy.h
index fd1c9f6a4e37..d3e65eb9e16f 100644
--- a/include/linux/usb/tegra_usb_phy.h
+++ b/include/linux/usb/tegra_usb_phy.h
@@ -18,6 +18,7 @@
 
 #include <linux/clk.h>
 #include <linux/gpio.h>
+#include <linux/regmap.h>
 #include <linux/reset.h>
 #include <linux/usb/otg.h>
 
@@ -30,6 +31,7 @@
  *      enter host mode
  * requires_extra_tuning_parameters: true if xcvr_hsslew, hssquelch_level
  *      and hsdiscon_level should be set for adequate signal quality
+ * requires_pmc_ao_power_up: true if USB AO is powered down by default
  */
 
 struct tegra_phy_soc_config {
@@ -37,6 +39,7 @@ struct tegra_phy_soc_config {
 	bool has_hostpc;
 	bool requires_usbmode_setup;
 	bool requires_extra_tuning_parameters;
+	bool requires_pmc_ao_power_up;
 };
 
 struct tegra_utmip_config {
@@ -62,6 +65,7 @@ enum tegra_usb_phy_port_speed {
 struct tegra_xtal_freq;
 
 struct tegra_usb_phy {
+	int irq;
 	int instance;
 	const struct tegra_xtal_freq *freq;
 	void __iomem *regs;
@@ -70,6 +74,7 @@ struct tegra_usb_phy {
 	struct clk *pll_u;
 	struct clk *pad_clk;
 	struct regulator *vbus;
+	struct regmap *pmc_regmap;
 	enum usb_dr_mode mode;
 	void *config;
 	const struct tegra_phy_soc_config *soc_config;
-- 
2.32.0


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH v4 05/12] usb: otg-fsm: Fix hrtimer list corruption
  2021-07-17 12:11 [PATCH v4 00/12] Add OTG mode support to Tegra USB PHY, SMB347 and Nexus 7 Dmitry Osipenko
                   ` (3 preceding siblings ...)
  2021-07-17 12:11 ` [PATCH v4 04/12] usb: phy: tegra: Support OTG mode programming Dmitry Osipenko
@ 2021-07-17 12:11 ` Dmitry Osipenko
  2021-07-17 12:11 ` [PATCH v4 06/12] dt-bindings: power: supply: smb347-charger: Document USB VBUS regulator Dmitry Osipenko
                   ` (6 subsequent siblings)
  11 siblings, 0 replies; 15+ messages in thread
From: Dmitry Osipenko @ 2021-07-17 12:11 UTC (permalink / raw)
  To: Thierry Reding, Jonathan Hunter, Mark Brown, Rob Herring,
	Sebastian Reichel, Peter Chen, Greg Kroah-Hartman, Felipe Balbi,
	David Heidelberg
  Cc: devicetree, linux-pm, linux-usb, linux-kernel, linux-tegra

The HNP work can be re-scheduled while it's still in-fly. This results in
re-initialization of the busy work, resetting the hrtimer's list node of
the work and crashing kernel with null dereference within kernel/timer
once work's timer is expired. It's very easy to trigger this problem by
re-plugging USB cable quickly. Initialize HNP work only once to fix this
trouble.

 Unable to handle kernel NULL pointer dereference at virtual address 00000126)
 ...
 PC is at __run_timers.part.0+0x150/0x228
 LR is at __next_timer_interrupt+0x51/0x9c
 ...
 (__run_timers.part.0) from [<c0187a2b>] (run_timer_softirq+0x2f/0x50)
 (run_timer_softirq) from [<c01013ad>] (__do_softirq+0xd5/0x2f0)
 (__do_softirq) from [<c012589b>] (irq_exit+0xab/0xb8)
 (irq_exit) from [<c0170341>] (handle_domain_irq+0x45/0x60)
 (handle_domain_irq) from [<c04c4a43>] (gic_handle_irq+0x6b/0x7c)
 (gic_handle_irq) from [<c0100b65>] (__irq_svc+0x65/0xac)

Cc: stable@vger.kernel.org
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/usb/common/usb-otg-fsm.c | 6 +++++-
 include/linux/usb/otg-fsm.h      | 1 +
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/common/usb-otg-fsm.c b/drivers/usb/common/usb-otg-fsm.c
index 3740cf95560e..0697fde51d00 100644
--- a/drivers/usb/common/usb-otg-fsm.c
+++ b/drivers/usb/common/usb-otg-fsm.c
@@ -193,7 +193,11 @@ static void otg_start_hnp_polling(struct otg_fsm *fsm)
 	if (!fsm->host_req_flag)
 		return;
 
-	INIT_DELAYED_WORK(&fsm->hnp_polling_work, otg_hnp_polling_work);
+	if (!fsm->hnp_work_inited) {
+		INIT_DELAYED_WORK(&fsm->hnp_polling_work, otg_hnp_polling_work);
+		fsm->hnp_work_inited = true;
+	}
+
 	schedule_delayed_work(&fsm->hnp_polling_work,
 					msecs_to_jiffies(T_HOST_REQ_POLL));
 }
diff --git a/include/linux/usb/otg-fsm.h b/include/linux/usb/otg-fsm.h
index 3aee78dda16d..784659d4dc99 100644
--- a/include/linux/usb/otg-fsm.h
+++ b/include/linux/usb/otg-fsm.h
@@ -196,6 +196,7 @@ struct otg_fsm {
 	struct mutex lock;
 	u8 *host_req_flag;
 	struct delayed_work hnp_polling_work;
+	bool hnp_work_inited;
 	bool state_changed;
 };
 
-- 
2.32.0


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH v4 06/12] dt-bindings: power: supply: smb347-charger: Document USB VBUS regulator
  2021-07-17 12:11 [PATCH v4 00/12] Add OTG mode support to Tegra USB PHY, SMB347 and Nexus 7 Dmitry Osipenko
                   ` (4 preceding siblings ...)
  2021-07-17 12:11 ` [PATCH v4 05/12] usb: otg-fsm: Fix hrtimer list corruption Dmitry Osipenko
@ 2021-07-17 12:11 ` Dmitry Osipenko
  2021-07-17 12:11 ` [PATCH v4 07/12] power: supply: smb347-charger: Make smb347_set_writable() IRQ-safe Dmitry Osipenko
                   ` (5 subsequent siblings)
  11 siblings, 0 replies; 15+ messages in thread
From: Dmitry Osipenko @ 2021-07-17 12:11 UTC (permalink / raw)
  To: Thierry Reding, Jonathan Hunter, Mark Brown, Rob Herring,
	Sebastian Reichel, Peter Chen, Greg Kroah-Hartman, Felipe Balbi,
	David Heidelberg
  Cc: devicetree, linux-pm, linux-usb, linux-kernel, linux-tegra

SMB347 can supply power to USB VBUS, which is required by OTG-cable
devices that want to switch USB port into the host mode. Add USB VBUS
regulator properties.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 .../power/supply/summit,smb347-charger.yaml   | 30 +++++++++++++++++++
 .../dt-bindings/power/summit,smb347-charger.h |  4 +++
 2 files changed, 34 insertions(+)

diff --git a/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml b/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml
index 983fc215c1e5..20862cdfc116 100644
--- a/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml
+++ b/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml
@@ -73,6 +73,26 @@ properties:
       - 1 # SMB3XX_SOFT_TEMP_COMPENSATE_CURRENT Current compensation
       - 2 # SMB3XX_SOFT_TEMP_COMPENSATE_VOLTAGE Voltage compensation
 
+  summit,inok-polarity:
+    description: |
+      Polarity of INOK signal indicating presence of external power supply.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # SMB3XX_SYSOK_INOK_ACTIVE_LOW
+      - 1 # SMB3XX_SYSOK_INOK_ACTIVE_HIGH
+
+  usb-vbus:
+    $ref: "../../regulator/regulator.yaml#"
+    type: object
+
+    properties:
+      summit,needs-inok-toggle:
+        type: boolean
+        description: INOK signal is fixed and polarity needs to be toggled
+                     in order to enable/disable output mode.
+
+    unevaluatedProperties: false
+
 allOf:
   - if:
       properties:
@@ -134,6 +154,7 @@ examples:
             reg = <0x7f>;
 
             summit,enable-charge-control = <SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH>;
+            summit,inok-polarity = <SMB3XX_SYSOK_INOK_ACTIVE_LOW>;
             summit,chip-temperature-threshold-celsius = <110>;
             summit,mains-current-limit-microamp = <2000000>;
             summit,usb-current-limit-microamp = <500000>;
@@ -141,6 +162,15 @@ examples:
             summit,enable-mains-charging;
 
             monitored-battery = <&battery>;
+
+            usb-vbus {
+                regulator-name = "usb_vbus";
+                regulator-min-microvolt = <5000000>;
+                regulator-max-microvolt = <5000000>;
+                regulator-min-microamp = <750000>;
+                regulator-max-microamp = <750000>;
+                summit,needs-inok-toggle;
+            };
         };
     };
 
diff --git a/include/dt-bindings/power/summit,smb347-charger.h b/include/dt-bindings/power/summit,smb347-charger.h
index d918bf321a71..3205699b5e41 100644
--- a/include/dt-bindings/power/summit,smb347-charger.h
+++ b/include/dt-bindings/power/summit,smb347-charger.h
@@ -16,4 +16,8 @@
 #define SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW	1
 #define SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH	2
 
+/* Polarity of INOK signal */
+#define SMB3XX_SYSOK_INOK_ACTIVE_LOW		0
+#define SMB3XX_SYSOK_INOK_ACTIVE_HIGH		1
+
 #endif
-- 
2.32.0


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH v4 07/12] power: supply: smb347-charger: Make smb347_set_writable() IRQ-safe
  2021-07-17 12:11 [PATCH v4 00/12] Add OTG mode support to Tegra USB PHY, SMB347 and Nexus 7 Dmitry Osipenko
                   ` (5 preceding siblings ...)
  2021-07-17 12:11 ` [PATCH v4 06/12] dt-bindings: power: supply: smb347-charger: Document USB VBUS regulator Dmitry Osipenko
@ 2021-07-17 12:11 ` Dmitry Osipenko
  2021-07-17 12:11 ` [PATCH v4 08/12] power: supply: smb347-charger: Remove caching of charger state Dmitry Osipenko
                   ` (4 subsequent siblings)
  11 siblings, 0 replies; 15+ messages in thread
From: Dmitry Osipenko @ 2021-07-17 12:11 UTC (permalink / raw)
  To: Thierry Reding, Jonathan Hunter, Mark Brown, Rob Herring,
	Sebastian Reichel, Peter Chen, Greg Kroah-Hartman, Felipe Balbi,
	David Heidelberg
  Cc: devicetree, linux-pm, linux-usb, linux-kernel, linux-tegra

The smb347_set_writable() is used by interrupt handler and outside of it.
The interrupt should be disabled when the function is used outside of
interrupt handler in order to prevent racing with the interrupt context.
Add new parameter to smb347_set_writable() that allows to disable IRQ.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/power/supply/smb347-charger.c | 30 +++++++++++++++++++--------
 1 file changed, 21 insertions(+), 9 deletions(-)

diff --git a/drivers/power/supply/smb347-charger.c b/drivers/power/supply/smb347-charger.c
index df240420f2de..db1378b41f80 100644
--- a/drivers/power/supply/smb347-charger.c
+++ b/drivers/power/supply/smb347-charger.c
@@ -671,10 +671,22 @@ static int smb347_set_temp_limits(struct smb347_charger *smb)
  *
  * Returns %0 on success and negative errno in case of failure.
  */
-static int smb347_set_writable(struct smb347_charger *smb, bool writable)
+static int smb347_set_writable(struct smb347_charger *smb, bool writable,
+			       bool irq_toggle)
 {
-	return regmap_update_bits(smb->regmap, CMD_A, CMD_A_ALLOW_WRITE,
-				  writable ? CMD_A_ALLOW_WRITE : 0);
+	struct i2c_client *client = to_i2c_client(smb->dev);
+	int ret;
+
+	if (writable && irq_toggle && !smb->irq_unsupported)
+		disable_irq(client->irq);
+
+	ret = regmap_update_bits(smb->regmap, CMD_A, CMD_A_ALLOW_WRITE,
+				 writable ? CMD_A_ALLOW_WRITE : 0);
+
+	if ((!writable || ret) && irq_toggle && !smb->irq_unsupported)
+		enable_irq(client->irq);
+
+	return ret;
 }
 
 static int smb347_hw_init(struct smb347_charger *smb)
@@ -682,7 +694,7 @@ static int smb347_hw_init(struct smb347_charger *smb)
 	unsigned int val;
 	int ret;
 
-	ret = smb347_set_writable(smb, true);
+	ret = smb347_set_writable(smb, true, false);
 	if (ret < 0)
 		return ret;
 
@@ -758,7 +770,7 @@ static int smb347_hw_init(struct smb347_charger *smb)
 	ret = smb347_start_stop_charging(smb);
 
 fail:
-	smb347_set_writable(smb, false);
+	smb347_set_writable(smb, false, false);
 	return ret;
 }
 
@@ -866,7 +878,7 @@ static int smb347_irq_set(struct smb347_charger *smb, bool enable)
 	if (smb->irq_unsupported)
 		return 0;
 
-	ret = smb347_set_writable(smb, true);
+	ret = smb347_set_writable(smb, true, true);
 	if (ret < 0)
 		return ret;
 
@@ -891,7 +903,7 @@ static int smb347_irq_set(struct smb347_charger *smb, bool enable)
 	ret = regmap_update_bits(smb->regmap, CFG_PIN, CFG_PIN_EN_CHARGER_ERROR,
 				 enable ? CFG_PIN_EN_CHARGER_ERROR : 0);
 fail:
-	smb347_set_writable(smb, false);
+	smb347_set_writable(smb, false, true);
 	return ret;
 }
 
@@ -919,7 +931,7 @@ static int smb347_irq_init(struct smb347_charger *smb,
 	if (!client->irq)
 		return 0;
 
-	ret = smb347_set_writable(smb, true);
+	ret = smb347_set_writable(smb, true, false);
 	if (ret < 0)
 		return ret;
 
@@ -931,7 +943,7 @@ static int smb347_irq_init(struct smb347_charger *smb,
 				 CFG_STAT_ACTIVE_HIGH | CFG_STAT_DISABLED,
 				 CFG_STAT_DISABLED);
 
-	smb347_set_writable(smb, false);
+	smb347_set_writable(smb, false, false);
 
 	if (ret < 0) {
 		dev_warn(smb->dev, "failed to initialize IRQ: %d\n", ret);
-- 
2.32.0


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH v4 08/12] power: supply: smb347-charger: Remove caching of charger state
  2021-07-17 12:11 [PATCH v4 00/12] Add OTG mode support to Tegra USB PHY, SMB347 and Nexus 7 Dmitry Osipenko
                   ` (6 preceding siblings ...)
  2021-07-17 12:11 ` [PATCH v4 07/12] power: supply: smb347-charger: Make smb347_set_writable() IRQ-safe Dmitry Osipenko
@ 2021-07-17 12:11 ` Dmitry Osipenko
  2021-07-17 16:20   ` Sebastian Reichel
  2021-07-17 12:11 ` [PATCH v4 09/12] power: supply: smb347-charger: Implement USB VBUS regulator Dmitry Osipenko
                   ` (3 subsequent siblings)
  11 siblings, 1 reply; 15+ messages in thread
From: Dmitry Osipenko @ 2021-07-17 12:11 UTC (permalink / raw)
  To: Thierry Reding, Jonathan Hunter, Mark Brown, Rob Herring,
	Sebastian Reichel, Peter Chen, Greg Kroah-Hartman, Felipe Balbi,
	David Heidelberg
  Cc: devicetree, linux-pm, linux-usb, linux-kernel, linux-tegra

Regmap already provides us with the caching, so remove caching of charger
state to make code cleaner.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/power/supply/smb347-charger.c | 14 ++------------
 1 file changed, 2 insertions(+), 12 deletions(-)

diff --git a/drivers/power/supply/smb347-charger.c b/drivers/power/supply/smb347-charger.c
index db1378b41f80..f81c60c679a0 100644
--- a/drivers/power/supply/smb347-charger.c
+++ b/drivers/power/supply/smb347-charger.c
@@ -135,7 +135,6 @@
  * @id: SMB charger ID
  * @mains_online: is AC/DC input connected
  * @usb_online: is USB input connected
- * @charging_enabled: is charging enabled
  * @irq_unsupported: is interrupt unsupported by SMB hardware
  * @max_charge_current: maximum current (in uA) the battery can be charged
  * @max_charge_voltage: maximum voltage (in uV) the battery can be charged
@@ -192,7 +191,6 @@ struct smb347_charger {
 	unsigned int		id;
 	bool			mains_online;
 	bool			usb_online;
-	bool			charging_enabled;
 	bool			irq_unsupported;
 
 	unsigned int		max_charge_current;
@@ -358,21 +356,13 @@ static int smb347_charging_status(struct smb347_charger *smb)
 
 static int smb347_charging_set(struct smb347_charger *smb, bool enable)
 {
-	int ret = 0;
-
 	if (smb->enable_control != SMB3XX_CHG_ENABLE_SW) {
 		dev_dbg(smb->dev, "charging enable/disable in SW disabled\n");
 		return 0;
 	}
 
-	if (smb->charging_enabled != enable) {
-		ret = regmap_update_bits(smb->regmap, CMD_A, CMD_A_CHG_ENABLED,
-					 enable ? CMD_A_CHG_ENABLED : 0);
-		if (!ret)
-			smb->charging_enabled = enable;
-	}
-
-	return ret;
+	return regmap_update_bits(smb->regmap, CMD_A, CMD_A_CHG_ENABLED,
+				  enable ? CMD_A_CHG_ENABLED : 0);
 }
 
 static inline int smb347_charging_enable(struct smb347_charger *smb)
-- 
2.32.0


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH v4 09/12] power: supply: smb347-charger: Implement USB VBUS regulator
  2021-07-17 12:11 [PATCH v4 00/12] Add OTG mode support to Tegra USB PHY, SMB347 and Nexus 7 Dmitry Osipenko
                   ` (7 preceding siblings ...)
  2021-07-17 12:11 ` [PATCH v4 08/12] power: supply: smb347-charger: Remove caching of charger state Dmitry Osipenko
@ 2021-07-17 12:11 ` Dmitry Osipenko
  2021-07-17 12:11 ` [PATCH v4 10/12] ARM: tegra: Add new properties to USB PHY device-tree nodes Dmitry Osipenko
                   ` (2 subsequent siblings)
  11 siblings, 0 replies; 15+ messages in thread
From: Dmitry Osipenko @ 2021-07-17 12:11 UTC (permalink / raw)
  To: Thierry Reding, Jonathan Hunter, Mark Brown, Rob Herring,
	Sebastian Reichel, Peter Chen, Greg Kroah-Hartman, Felipe Balbi,
	David Heidelberg
  Cc: devicetree, linux-pm, linux-usb, linux-kernel, linux-tegra

SMB347 can supply power to USB VBUS, implement the USB VBUS regulator.
USB VBUS needs to be powered for switching OTG-cable USB port into host
mode.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/power/supply/Kconfig          |   1 +
 drivers/power/supply/smb347-charger.c | 219 ++++++++++++++++++++++++++
 2 files changed, 220 insertions(+)

diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index d75643415f8e..1710c7bdf4a2 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -694,6 +694,7 @@ config CHARGER_BQ256XX
 config CHARGER_SMB347
 	tristate "Summit Microelectronics SMB3XX Battery Charger"
 	depends on I2C
+	depends on REGULATOR
 	select REGMAP_I2C
 	help
 	  Say Y to include support for Summit Microelectronics SMB345,
diff --git a/drivers/power/supply/smb347-charger.c b/drivers/power/supply/smb347-charger.c
index f81c60c679a0..330f1cd40e5e 100644
--- a/drivers/power/supply/smb347-charger.c
+++ b/drivers/power/supply/smb347-charger.c
@@ -18,6 +18,7 @@
 #include <linux/power_supply.h>
 #include <linux/property.h>
 #include <linux/regmap.h>
+#include <linux/regulator/driver.h>
 
 #include <dt-bindings/power/summit,smb347-charger.h>
 
@@ -62,12 +63,15 @@
 #define CFG_THERM_SOFT_COLD_COMPENSATION_SHIFT	2
 #define CFG_THERM_MONITOR_DISABLED		BIT(4)
 #define CFG_SYSOK				0x08
+#define CFG_SYSOK_INOK_ACTIVE_HIGH		BIT(0)
 #define CFG_SYSOK_SUSPEND_HARD_LIMIT_DISABLED	BIT(2)
 #define CFG_OTHER				0x09
 #define CFG_OTHER_RID_MASK			0xc0
 #define CFG_OTHER_RID_ENABLED_AUTO_OTG		0xc0
 #define CFG_OTG					0x0a
 #define CFG_OTG_TEMP_THRESHOLD_MASK		0x30
+#define CFG_OTG_CURRENT_LIMIT_250mA		BIT(2)
+#define CFG_OTG_CURRENT_LIMIT_750mA		BIT(3)
 #define CFG_OTG_TEMP_THRESHOLD_SHIFT		4
 #define CFG_OTG_CC_COMPENSATION_MASK		0xc0
 #define CFG_OTG_CC_COMPENSATION_SHIFT		6
@@ -91,6 +95,7 @@
 #define CMD_A					0x30
 #define CMD_A_CHG_ENABLED			BIT(1)
 #define CMD_A_SUSPEND_ENABLED			BIT(2)
+#define CMD_A_OTG_ENABLED			BIT(4)
 #define CMD_A_ALLOW_WRITE			BIT(7)
 #define CMD_B					0x31
 #define CMD_C					0x33
@@ -132,10 +137,12 @@
  * @regmap: pointer to driver regmap
  * @mains: power_supply instance for AC/DC power
  * @usb: power_supply instance for USB power
+ * @usb_rdev: USB VBUS regulator device
  * @id: SMB charger ID
  * @mains_online: is AC/DC input connected
  * @usb_online: is USB input connected
  * @irq_unsupported: is interrupt unsupported by SMB hardware
+ * @usb_vbus_enabled: is USB VBUS powered by SMB charger
  * @max_charge_current: maximum current (in uA) the battery can be charged
  * @max_charge_voltage: maximum voltage (in uV) the battery can be charged
  * @pre_charge_current: current (in uA) to use in pre-charging phase
@@ -166,6 +173,8 @@
  * @use_usb_otg: USB OTG output can be used (not implemented yet)
  * @enable_control: how charging enable/disable is controlled
  *		    (driver/pin controls)
+ * @inok_polarity: polarity of INOK signal which denotes presence of external
+ *		   power supply
  *
  * @use_main, @use_usb, and @use_usb_otg are means to enable/disable
  * hardware support for these. This is useful when we want to have for
@@ -188,10 +197,12 @@ struct smb347_charger {
 	struct regmap		*regmap;
 	struct power_supply	*mains;
 	struct power_supply	*usb;
+	struct regulator_dev	*usb_rdev;
 	unsigned int		id;
 	bool			mains_online;
 	bool			usb_online;
 	bool			irq_unsupported;
+	bool			usb_vbus_enabled;
 
 	unsigned int		max_charge_current;
 	unsigned int		max_charge_voltage;
@@ -212,6 +223,7 @@ struct smb347_charger {
 	bool			use_usb;
 	bool			use_usb_otg;
 	unsigned int		enable_control;
+	unsigned int		inok_polarity;
 };
 
 enum smb_charger_chipid {
@@ -361,6 +373,11 @@ static int smb347_charging_set(struct smb347_charger *smb, bool enable)
 		return 0;
 	}
 
+	if (enable && smb->usb_vbus_enabled) {
+		dev_dbg(smb->dev, "charging not enabled because USB is in host mode\n");
+		return 0;
+	}
+
 	return regmap_update_bits(smb->regmap, CMD_A, CMD_A_CHG_ENABLED,
 				  enable ? CMD_A_CHG_ENABLED : 0);
 }
@@ -1243,6 +1260,13 @@ static void smb347_dt_parse_dev_info(struct smb347_charger *smb)
 	/* Select charging control */
 	device_property_read_u32(dev, "summit,enable-charge-control",
 				 &smb->enable_control);
+
+	/*
+	 * Polarity of INOK signal indicating presence of external power
+	 * supply connected to the charger.
+	 */
+	device_property_read_u32(dev, "summit,inok-polarity",
+				 &smb->inok_polarity);
 }
 
 static int smb347_get_battery_info(struct smb347_charger *smb)
@@ -1294,6 +1318,160 @@ static int smb347_get_battery_info(struct smb347_charger *smb)
 	return 0;
 }
 
+static int smb347_usb_vbus_get_current_limit(struct regulator_dev *rdev)
+{
+	struct smb347_charger *smb = rdev_get_drvdata(rdev);
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(smb->regmap, CFG_OTG, &val);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * It's unknown what happens if this bit is unset due to lack of
+	 * access to the datasheet, assume it's limit-enable.
+	 */
+	if (!(val & CFG_OTG_CURRENT_LIMIT_250mA))
+		return 0;
+
+	return val & CFG_OTG_CURRENT_LIMIT_750mA ? 750000 : 250000;
+}
+
+static int smb347_usb_vbus_set_new_current_limit(struct smb347_charger *smb,
+						 int max_uA)
+{
+	const unsigned int mask = CFG_OTG_CURRENT_LIMIT_750mA |
+				  CFG_OTG_CURRENT_LIMIT_250mA;
+	unsigned int val = CFG_OTG_CURRENT_LIMIT_250mA;
+	int ret;
+
+	if (max_uA >= 750000)
+		val |= CFG_OTG_CURRENT_LIMIT_750mA;
+
+	ret = regmap_update_bits(smb->regmap, CFG_OTG, mask, val);
+	if (ret < 0)
+		dev_err(smb->dev, "failed to change USB current limit\n");
+
+	return ret;
+}
+
+static int smb347_usb_vbus_set_current_limit(struct regulator_dev *rdev,
+					     int min_uA, int max_uA)
+{
+	struct smb347_charger *smb = rdev_get_drvdata(rdev);
+	int ret;
+
+	ret = smb347_set_writable(smb, true, true);
+	if (ret < 0)
+		return ret;
+
+	ret = smb347_usb_vbus_set_new_current_limit(smb, max_uA);
+	smb347_set_writable(smb, false, true);
+
+	return ret;
+}
+
+static int smb347_usb_vbus_regulator_enable(struct regulator_dev *rdev)
+{
+	struct smb347_charger *smb = rdev_get_drvdata(rdev);
+	int ret, max_uA;
+
+	ret = smb347_set_writable(smb, true, true);
+	if (ret < 0)
+		return ret;
+
+	smb347_charging_disable(smb);
+
+	if (device_property_read_bool(&rdev->dev, "summit,needs-inok-toggle")) {
+		unsigned int sysok = 0;
+
+		if (smb->inok_polarity == SMB3XX_SYSOK_INOK_ACTIVE_LOW)
+			sysok = CFG_SYSOK_INOK_ACTIVE_HIGH;
+
+		/*
+		 * VBUS won't be powered if INOK is active, so we need to
+		 * manually disable INOK on some platforms.
+		 */
+		ret = regmap_update_bits(smb->regmap, CFG_SYSOK,
+					 CFG_SYSOK_INOK_ACTIVE_HIGH, sysok);
+		if (ret < 0) {
+			dev_err(smb->dev, "failed to disable INOK\n");
+			goto done;
+		}
+	}
+
+	ret = smb347_usb_vbus_get_current_limit(rdev);
+	if (ret < 0) {
+		dev_err(smb->dev, "failed to get USB VBUS current limit\n");
+		goto done;
+	}
+
+	max_uA = ret;
+
+	ret = smb347_usb_vbus_set_new_current_limit(smb, 250000);
+	if (ret < 0) {
+		dev_err(smb->dev, "failed to preset USB VBUS current limit\n");
+		goto done;
+	}
+
+	ret = regmap_set_bits(smb->regmap, CMD_A, CMD_A_OTG_ENABLED);
+	if (ret < 0) {
+		dev_err(smb->dev, "failed to enable USB VBUS\n");
+		goto done;
+	}
+
+	smb->usb_vbus_enabled = true;
+
+	ret = smb347_usb_vbus_set_new_current_limit(smb, max_uA);
+	if (ret < 0) {
+		dev_err(smb->dev, "failed to restore USB VBUS current limit\n");
+		goto done;
+	}
+done:
+	smb347_set_writable(smb, false, true);
+
+	return ret;
+}
+
+static int smb347_usb_vbus_regulator_disable(struct regulator_dev *rdev)
+{
+	struct smb347_charger *smb = rdev_get_drvdata(rdev);
+	int ret;
+
+	ret = smb347_set_writable(smb, true, true);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_clear_bits(smb->regmap, CMD_A, CMD_A_OTG_ENABLED);
+	if (ret < 0) {
+		dev_err(smb->dev, "failed to disable USB VBUS\n");
+		goto done;
+	}
+
+	smb->usb_vbus_enabled = false;
+
+	if (device_property_read_bool(&rdev->dev, "summit,needs-inok-toggle")) {
+		unsigned int sysok = 0;
+
+		if (smb->inok_polarity == SMB3XX_SYSOK_INOK_ACTIVE_HIGH)
+			sysok = CFG_SYSOK_INOK_ACTIVE_HIGH;
+
+		ret = regmap_update_bits(smb->regmap, CFG_SYSOK,
+					 CFG_SYSOK_INOK_ACTIVE_HIGH, sysok);
+		if (ret < 0) {
+			dev_err(smb->dev, "failed to enable INOK\n");
+			goto done;
+		}
+	}
+
+	smb347_start_stop_charging(smb);
+done:
+	smb347_set_writable(smb, false, true);
+
+	return ret;
+}
+
 static const struct regmap_config smb347_regmap = {
 	.reg_bits	= 8,
 	.val_bits	= 8,
@@ -1302,6 +1480,14 @@ static const struct regmap_config smb347_regmap = {
 	.readable_reg	= smb347_readable_reg,
 };
 
+static const struct regulator_ops smb347_usb_vbus_regulator_ops = {
+	.is_enabled	= regulator_is_enabled_regmap,
+	.enable		= smb347_usb_vbus_regulator_enable,
+	.disable	= smb347_usb_vbus_regulator_disable,
+	.get_current_limit = smb347_usb_vbus_get_current_limit,
+	.set_current_limit = smb347_usb_vbus_set_current_limit,
+};
+
 static const struct power_supply_desc smb347_mains_desc = {
 	.name		= "smb347-mains",
 	.type		= POWER_SUPPLY_TYPE_MAINS,
@@ -1318,10 +1504,24 @@ static const struct power_supply_desc smb347_usb_desc = {
 	.num_properties	= ARRAY_SIZE(smb347_properties),
 };
 
+static const struct regulator_desc smb347_usb_vbus_regulator_desc = {
+	.name		= "smb347-usb-vbus",
+	.of_match	= of_match_ptr("usb-vbus"),
+	.ops		= &smb347_usb_vbus_regulator_ops,
+	.type		= REGULATOR_VOLTAGE,
+	.owner		= THIS_MODULE,
+	.enable_reg	= CMD_A,
+	.enable_mask	= CMD_A_OTG_ENABLED,
+	.enable_val	= CMD_A_OTG_ENABLED,
+	.fixed_uV	= 5000000,
+	.n_voltages	= 1,
+};
+
 static int smb347_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {
 	struct power_supply_config mains_usb_cfg = {};
+	struct regulator_config usb_rdev_cfg = {};
 	struct device *dev = &client->dev;
 	struct smb347_charger *smb;
 	int ret;
@@ -1369,6 +1569,18 @@ static int smb347_probe(struct i2c_client *client,
 	if (ret)
 		return ret;
 
+	usb_rdev_cfg.dev = dev;
+	usb_rdev_cfg.driver_data = smb;
+	usb_rdev_cfg.regmap = smb->regmap;
+
+	smb->usb_rdev = devm_regulator_register(dev,
+						&smb347_usb_vbus_regulator_desc,
+						&usb_rdev_cfg);
+	if (IS_ERR(smb->usb_rdev)) {
+		smb347_irq_disable(smb);
+		return PTR_ERR(smb->usb_rdev);
+	}
+
 	return 0;
 }
 
@@ -1376,11 +1588,17 @@ static int smb347_remove(struct i2c_client *client)
 {
 	struct smb347_charger *smb = i2c_get_clientdata(client);
 
+	smb347_usb_vbus_regulator_disable(smb->usb_rdev);
 	smb347_irq_disable(smb);
 
 	return 0;
 }
 
+static void smb347_shutdown(struct i2c_client *client)
+{
+	smb347_remove(client);
+}
+
 static const struct i2c_device_id smb347_id[] = {
 	{ "smb345", SMB345 },
 	{ "smb347", SMB347 },
@@ -1404,6 +1622,7 @@ static struct i2c_driver smb347_driver = {
 	},
 	.probe = smb347_probe,
 	.remove = smb347_remove,
+	.shutdown = smb347_shutdown,
 	.id_table = smb347_id,
 };
 module_i2c_driver(smb347_driver);
-- 
2.32.0


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH v4 10/12] ARM: tegra: Add new properties to USB PHY device-tree nodes
  2021-07-17 12:11 [PATCH v4 00/12] Add OTG mode support to Tegra USB PHY, SMB347 and Nexus 7 Dmitry Osipenko
                   ` (8 preceding siblings ...)
  2021-07-17 12:11 ` [PATCH v4 09/12] power: supply: smb347-charger: Implement USB VBUS regulator Dmitry Osipenko
@ 2021-07-17 12:11 ` Dmitry Osipenko
  2021-07-17 12:11 ` [PATCH v4 11/12] ARM: tegra: nexus7: Enable USB OTG mode Dmitry Osipenko
  2021-07-17 12:11 ` [PATCH v4 12/12] arm64: tegra132: Add new properties to USB PHY device-tree node Dmitry Osipenko
  11 siblings, 0 replies; 15+ messages in thread
From: Dmitry Osipenko @ 2021-07-17 12:11 UTC (permalink / raw)
  To: Thierry Reding, Jonathan Hunter, Mark Brown, Rob Herring,
	Sebastian Reichel, Peter Chen, Greg Kroah-Hartman, Felipe Balbi,
	David Heidelberg
  Cc: devicetree, linux-pm, linux-usb, linux-kernel, linux-tegra

Add new properties to USB PHYs needed for enabling USB OTG mode.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 arch/arm/boot/dts/tegra114.dtsi | 4 ++++
 arch/arm/boot/dts/tegra124.dtsi | 6 ++++++
 arch/arm/boot/dts/tegra20.dtsi  | 6 ++++++
 arch/arm/boot/dts/tegra30.dtsi  | 6 ++++++
 4 files changed, 22 insertions(+)

diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index fb99b3e971c3..b391c7940b8f 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -706,6 +706,7 @@ phy1: usb-phy@7d000000 {
 		compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x7d000000 0x4000>,
 		      <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA114_CLK_USBD>,
 			 <&tegra_car TEGRA114_CLK_PLL_U>,
@@ -725,6 +726,7 @@ phy1: usb-phy@7d000000 {
 		nvidia,hsdiscon-level = <5>;
 		nvidia,xcvr-hsslew = <12>;
 		nvidia,has-utmi-pad-registers;
+		nvidia,pmc = <&tegra_pmc 0>;
 		status = "disabled";
 	};
 
@@ -744,6 +746,7 @@ phy3: usb-phy@7d008000 {
 		compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x7d008000 0x4000>,
 		      <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA114_CLK_USB3>,
 			 <&tegra_car TEGRA114_CLK_PLL_U>,
@@ -762,6 +765,7 @@ phy3: usb-phy@7d008000 {
 		nvidia,hssquelch-level = <2>;
 		nvidia,hsdiscon-level = <5>;
 		nvidia,xcvr-hsslew = <12>;
+		nvidia,pmc = <&tegra_pmc 2>;
 		status = "disabled";
 	};
 
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 8b38f123f554..ee28bb2b01ba 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -1094,6 +1094,7 @@ phy1: usb-phy@7d000000 {
 		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x0 0x7d000000 0x0 0x4000>,
 		      <0x0 0x7d000000 0x0 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA124_CLK_USBD>,
 			 <&tegra_car TEGRA124_CLK_PLL_U>,
@@ -1113,6 +1114,7 @@ phy1: usb-phy@7d000000 {
 		nvidia,hsdiscon-level = <5>;
 		nvidia,xcvr-hsslew = <12>;
 		nvidia,has-utmi-pad-registers;
+		nvidia,pmc = <&tegra_pmc 0>;
 		status = "disabled";
 	};
 
@@ -1132,6 +1134,7 @@ phy2: usb-phy@7d004000 {
 		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x0 0x7d004000 0x0 0x4000>,
 		      <0x0 0x7d000000 0x0 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA124_CLK_USB2>,
 			 <&tegra_car TEGRA124_CLK_PLL_U>,
@@ -1150,6 +1153,7 @@ phy2: usb-phy@7d004000 {
 		nvidia,hssquelch-level = <2>;
 		nvidia,hsdiscon-level = <5>;
 		nvidia,xcvr-hsslew = <12>;
+		nvidia,pmc = <&tegra_pmc 1>;
 		status = "disabled";
 	};
 
@@ -1169,6 +1173,7 @@ phy3: usb-phy@7d008000 {
 		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x0 0x7d008000 0x0 0x4000>,
 		      <0x0 0x7d000000 0x0 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA124_CLK_USB3>,
 			 <&tegra_car TEGRA124_CLK_PLL_U>,
@@ -1187,6 +1192,7 @@ phy3: usb-phy@7d008000 {
 		nvidia,hssquelch-level = <2>;
 		nvidia,hsdiscon-level = <5>;
 		nvidia,xcvr-hsslew = <12>;
+		nvidia,pmc = <&tegra_pmc 2>;
 		status = "disabled";
 	};
 
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 70d81a6cbc61..1dfd5880e282 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -875,6 +875,7 @@ phy1: usb-phy@c5000000 {
 		compatible = "nvidia,tegra20-usb-phy";
 		reg = <0xc5000000 0x4000>,
 		      <0xc5000000 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA20_CLK_USBD>,
 			 <&tegra_car TEGRA20_CLK_PLL_U>,
@@ -893,6 +894,7 @@ phy1: usb-phy@c5000000 {
 		nvidia,xcvr-lsfslew = <1>;
 		nvidia,xcvr-lsrslew = <1>;
 		nvidia,has-utmi-pad-registers;
+		nvidia,pmc = <&tegra_pmc 0>;
 		status = "disabled";
 	};
 
@@ -913,6 +915,7 @@ usb@c5004000 {
 	phy2: usb-phy@c5004000 {
 		compatible = "nvidia,tegra20-usb-phy";
 		reg = <0xc5004000 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "ulpi";
 		clocks = <&tegra_car TEGRA20_CLK_USB2>,
 			 <&tegra_car TEGRA20_CLK_PLL_U>,
@@ -921,6 +924,7 @@ phy2: usb-phy@c5004000 {
 		resets = <&tegra_car 58>, <&tegra_car 22>;
 		reset-names = "usb", "utmi-pads";
 		#phy-cells = <0>;
+		nvidia,pmc = <&tegra_pmc 1>;
 		status = "disabled";
 	};
 
@@ -942,6 +946,7 @@ phy3: usb-phy@c5008000 {
 		compatible = "nvidia,tegra20-usb-phy";
 		reg = <0xc5008000 0x4000>,
 		      <0xc5000000 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA20_CLK_USB3>,
 			 <&tegra_car TEGRA20_CLK_PLL_U>,
@@ -958,6 +963,7 @@ phy3: usb-phy@c5008000 {
 		nvidia,xcvr-setup = <9>;
 		nvidia,xcvr-lsfslew = <2>;
 		nvidia,xcvr-lsrslew = <2>;
+		nvidia,pmc = <&tegra_pmc 2>;
 		status = "disabled";
 	};
 
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 377bbc50ad2a..776df5a1dd3f 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -1143,6 +1143,7 @@ phy1: usb-phy@7d000000 {
 		compatible = "nvidia,tegra30-usb-phy";
 		reg = <0x7d000000 0x4000>,
 		      <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA30_CLK_USBD>,
 			 <&tegra_car TEGRA30_CLK_PLL_U>,
@@ -1163,6 +1164,7 @@ phy1: usb-phy@7d000000 {
 		nvidia,hssquelch-level = <2>;
 		nvidia,hsdiscon-level = <5>;
 		nvidia,has-utmi-pad-registers;
+		nvidia,pmc = <&tegra_pmc 0>;
 		status = "disabled";
 	};
 
@@ -1184,6 +1186,7 @@ phy2: usb-phy@7d004000 {
 		compatible = "nvidia,tegra30-usb-phy";
 		reg = <0x7d004000 0x4000>,
 		      <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA30_CLK_USB2>,
 			 <&tegra_car TEGRA30_CLK_PLL_U>,
@@ -1203,6 +1206,7 @@ phy2: usb-phy@7d004000 {
 		nvidia,xcvr-hsslew = <32>;
 		nvidia,hssquelch-level = <2>;
 		nvidia,hsdiscon-level = <5>;
+		nvidia,pmc = <&tegra_pmc 1>;
 		status = "disabled";
 	};
 
@@ -1224,6 +1228,7 @@ phy3: usb-phy@7d008000 {
 		compatible = "nvidia,tegra30-usb-phy";
 		reg = <0x7d008000 0x4000>,
 		      <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA30_CLK_USB3>,
 			 <&tegra_car TEGRA30_CLK_PLL_U>,
@@ -1243,6 +1248,7 @@ phy3: usb-phy@7d008000 {
 		nvidia,xcvr-hsslew = <32>;
 		nvidia,hssquelch-level = <2>;
 		nvidia,hsdiscon-level = <5>;
+		nvidia,pmc = <&tegra_pmc 2>;
 		status = "disabled";
 	};
 
-- 
2.32.0


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH v4 11/12] ARM: tegra: nexus7: Enable USB OTG mode
  2021-07-17 12:11 [PATCH v4 00/12] Add OTG mode support to Tegra USB PHY, SMB347 and Nexus 7 Dmitry Osipenko
                   ` (9 preceding siblings ...)
  2021-07-17 12:11 ` [PATCH v4 10/12] ARM: tegra: Add new properties to USB PHY device-tree nodes Dmitry Osipenko
@ 2021-07-17 12:11 ` Dmitry Osipenko
  2021-07-17 12:11 ` [PATCH v4 12/12] arm64: tegra132: Add new properties to USB PHY device-tree node Dmitry Osipenko
  11 siblings, 0 replies; 15+ messages in thread
From: Dmitry Osipenko @ 2021-07-17 12:11 UTC (permalink / raw)
  To: Thierry Reding, Jonathan Hunter, Mark Brown, Rob Herring,
	Sebastian Reichel, Peter Chen, Greg Kroah-Hartman, Felipe Balbi,
	David Heidelberg
  Cc: devicetree, linux-pm, linux-usb, linux-kernel, linux-tegra

Nexus 7 has OTG-cable microUSB port, enable OTG mode. USB peripheral
devices now can be connected to Nexus 7 using OTG adapter, switching
USB port into host mode.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 .../tegra30-asus-nexus7-grouper-common.dtsi   | 25 +++++++++++++++++--
 1 file changed, 23 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi
index 4f116c26f6ce..798ac22a50d2 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi
@@ -941,9 +941,29 @@ power_supply: charger@6a {
 			interrupts = <TEGRA_GPIO(V, 1) IRQ_TYPE_EDGE_BOTH>;
 
 			summit,enable-charge-control = <SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW>;
+			summit,inok-polarity = <SMB3XX_SYSOK_INOK_ACTIVE_LOW>;
 			summit,enable-usb-charging;
 
 			monitored-battery = <&battery_cell>;
+
+			usb_vbus: usb-vbus {
+				regulator-name = "usb_vbus";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-min-microamp = <750000>;
+				regulator-max-microamp = <750000>;
+
+				/*
+				 * SMB347 INOK input pin is connected to PMIC's
+				 * ACOK output, which is fixed to ACTIVE_LOW as
+				 * long as battery voltage is in a good range.
+				 *
+				 * Active INOK disables SMB347 output, so polarity
+				 * needs to be toggled when we want to get the
+				 * output.
+				 */
+				summit,needs-inok-toggle;
+			};
 		};
 	};
 
@@ -1017,12 +1037,13 @@ sdmmc4: mmc@78000600 {
 	usb@7d000000 {
 		compatible = "nvidia,tegra30-udc";
 		status = "okay";
-		dr_mode = "peripheral";
+		dr_mode = "otg";
+		vbus-supply = <&usb_vbus>;
 	};
 
 	usb-phy@7d000000 {
 		status = "okay";
-		dr_mode = "peripheral";
+		dr_mode = "otg";
 		nvidia,hssync-start-delay = <0>;
 		nvidia,xcvr-lsfslew = <2>;
 		nvidia,xcvr-lsrslew = <2>;
-- 
2.32.0


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH v4 12/12] arm64: tegra132: Add new properties to USB PHY device-tree node
  2021-07-17 12:11 [PATCH v4 00/12] Add OTG mode support to Tegra USB PHY, SMB347 and Nexus 7 Dmitry Osipenko
                   ` (10 preceding siblings ...)
  2021-07-17 12:11 ` [PATCH v4 11/12] ARM: tegra: nexus7: Enable USB OTG mode Dmitry Osipenko
@ 2021-07-17 12:11 ` Dmitry Osipenko
  11 siblings, 0 replies; 15+ messages in thread
From: Dmitry Osipenko @ 2021-07-17 12:11 UTC (permalink / raw)
  To: Thierry Reding, Jonathan Hunter, Mark Brown, Rob Herring,
	Sebastian Reichel, Peter Chen, Greg Kroah-Hartman, Felipe Balbi,
	David Heidelberg
  Cc: devicetree, linux-pm, linux-usb, linux-kernel, linux-tegra

Add new properties to USB PHYs needed for enabling USB OTG mode.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 arch/arm64/boot/dts/nvidia/tegra132.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
index 9928a87f593a..f79a66226457 100644
--- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
@@ -1123,6 +1123,7 @@ phy1: usb-phy@7d000000 {
 		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x0 0x7d000000 0x0 0x4000>,
 		      <0x0 0x7d000000 0x0 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA124_CLK_USBD>,
 			 <&tegra_car TEGRA124_CLK_PLL_U>,
@@ -1142,6 +1143,7 @@ phy1: usb-phy@7d000000 {
 		nvidia,hsdiscon-level = <5>;
 		nvidia,xcvr-hsslew = <12>;
 		nvidia,has-utmi-pad-registers;
+		nvidia,pmc = <&tegra_pmc 0>;
 		status = "disabled";
 	};
 
@@ -1162,6 +1164,7 @@ phy2: usb-phy@7d004000 {
 		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x0 0x7d004000 0x0 0x4000>,
 		      <0x0 0x7d000000 0x0 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA124_CLK_USB2>,
 			 <&tegra_car TEGRA124_CLK_PLL_U>,
@@ -1180,6 +1183,7 @@ phy2: usb-phy@7d004000 {
 		nvidia,hssquelch-level = <2>;
 		nvidia,hsdiscon-level = <5>;
 		nvidia,xcvr-hsslew = <12>;
+		nvidia,pmc = <&tegra_pmc 1>;
 		status = "disabled";
 	};
 
@@ -1200,6 +1204,7 @@ phy3: usb-phy@7d008000 {
 		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x0 0x7d008000 0x0 0x4000>,
 		      <0x0 0x7d000000 0x0 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA124_CLK_USB3>,
 			 <&tegra_car TEGRA124_CLK_PLL_U>,
@@ -1218,6 +1223,7 @@ phy3: usb-phy@7d008000 {
 		nvidia,hssquelch-level = <2>;
 		nvidia,hsdiscon-level = <5>;
 		nvidia,xcvr-hsslew = <12>;
+		nvidia,pmc = <&tegra_pmc 2>;
 		status = "disabled";
 	};
 
-- 
2.32.0


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* Re: [PATCH v4 08/12] power: supply: smb347-charger: Remove caching of charger state
  2021-07-17 12:11 ` [PATCH v4 08/12] power: supply: smb347-charger: Remove caching of charger state Dmitry Osipenko
@ 2021-07-17 16:20   ` Sebastian Reichel
  2021-07-17 17:29     ` Dmitry Osipenko
  0 siblings, 1 reply; 15+ messages in thread
From: Sebastian Reichel @ 2021-07-17 16:20 UTC (permalink / raw)
  To: Dmitry Osipenko
  Cc: Thierry Reding, Jonathan Hunter, Mark Brown, Rob Herring,
	Peter Chen, Greg Kroah-Hartman, Felipe Balbi, David Heidelberg,
	devicetree, linux-pm, linux-usb, linux-kernel, linux-tegra

[-- Attachment #1: Type: text/plain, Size: 2358 bytes --]

Hi,

On Sat, Jul 17, 2021 at 03:11:08PM +0300, Dmitry Osipenko wrote:
> Regmap already provides us with the caching, so remove caching of charger
> state to make code cleaner.

cache_type is not initialized in smb347's regmap config and thus
set to 0 = REGCACHE_NONE:

static const struct regmap_config smb347_regmap = {
	.reg_bits	= 8,
	.val_bits	= 8,
	.max_register	= SMB347_MAX_REGISTER,
	.volatile_reg	= smb347_volatile_reg,
	.readable_reg	= smb347_readable_reg,
};

-- Sebastian


> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
> ---
>  drivers/power/supply/smb347-charger.c | 14 ++------------
>  1 file changed, 2 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/power/supply/smb347-charger.c b/drivers/power/supply/smb347-charger.c
> index db1378b41f80..f81c60c679a0 100644
> --- a/drivers/power/supply/smb347-charger.c
> +++ b/drivers/power/supply/smb347-charger.c
> @@ -135,7 +135,6 @@
>   * @id: SMB charger ID
>   * @mains_online: is AC/DC input connected
>   * @usb_online: is USB input connected
> - * @charging_enabled: is charging enabled
>   * @irq_unsupported: is interrupt unsupported by SMB hardware
>   * @max_charge_current: maximum current (in uA) the battery can be charged
>   * @max_charge_voltage: maximum voltage (in uV) the battery can be charged
> @@ -192,7 +191,6 @@ struct smb347_charger {
>  	unsigned int		id;
>  	bool			mains_online;
>  	bool			usb_online;
> -	bool			charging_enabled;
>  	bool			irq_unsupported;
>  
>  	unsigned int		max_charge_current;
> @@ -358,21 +356,13 @@ static int smb347_charging_status(struct smb347_charger *smb)
>  
>  static int smb347_charging_set(struct smb347_charger *smb, bool enable)
>  {
> -	int ret = 0;
> -
>  	if (smb->enable_control != SMB3XX_CHG_ENABLE_SW) {
>  		dev_dbg(smb->dev, "charging enable/disable in SW disabled\n");
>  		return 0;
>  	}
>  
> -	if (smb->charging_enabled != enable) {
> -		ret = regmap_update_bits(smb->regmap, CMD_A, CMD_A_CHG_ENABLED,
> -					 enable ? CMD_A_CHG_ENABLED : 0);
> -		if (!ret)
> -			smb->charging_enabled = enable;
> -	}
> -
> -	return ret;
> +	return regmap_update_bits(smb->regmap, CMD_A, CMD_A_CHG_ENABLED,
> +				  enable ? CMD_A_CHG_ENABLED : 0);
>  }
>  
>  static inline int smb347_charging_enable(struct smb347_charger *smb)
> -- 
> 2.32.0
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: [PATCH v4 08/12] power: supply: smb347-charger: Remove caching of charger state
  2021-07-17 16:20   ` Sebastian Reichel
@ 2021-07-17 17:29     ` Dmitry Osipenko
  0 siblings, 0 replies; 15+ messages in thread
From: Dmitry Osipenko @ 2021-07-17 17:29 UTC (permalink / raw)
  To: Sebastian Reichel
  Cc: Thierry Reding, Jonathan Hunter, Mark Brown, Rob Herring,
	Peter Chen, Greg Kroah-Hartman, Felipe Balbi, David Heidelberg,
	devicetree, linux-pm, linux-usb, linux-kernel, linux-tegra

17.07.2021 19:20, Sebastian Reichel пишет:
> Hi,
> 
> On Sat, Jul 17, 2021 at 03:11:08PM +0300, Dmitry Osipenko wrote:
>> Regmap already provides us with the caching, so remove caching of charger
>> state to make code cleaner.
> 
> cache_type is not initialized in smb347's regmap config and thus
> set to 0 = REGCACHE_NONE:
> 
> static const struct regmap_config smb347_regmap = {
> 	.reg_bits	= 8,
> 	.val_bits	= 8,
> 	.max_register	= SMB347_MAX_REGISTER,
> 	.volatile_reg	= smb347_volatile_reg,
> 	.readable_reg	= smb347_readable_reg,
> };

Good catch, thank you. I'll add patch to enable caching.

^ permalink raw reply	[flat|nested] 15+ messages in thread

end of thread, other threads:[~2021-07-17 17:29 UTC | newest]

Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-17 12:11 [PATCH v4 00/12] Add OTG mode support to Tegra USB PHY, SMB347 and Nexus 7 Dmitry Osipenko
2021-07-17 12:11 ` [PATCH v4 01/12] dt-bindings: phy: tegra20-usb-phy: Convert to schema Dmitry Osipenko
2021-07-17 12:11 ` [PATCH v4 02/12] dt-bindings: phy: tegra20-usb-phy: Document properties needed for OTG mode Dmitry Osipenko
2021-07-17 12:11 ` [PATCH v4 03/12] soc/tegra: pmc: Expose USB regmap to all SoCs Dmitry Osipenko
2021-07-17 12:11 ` [PATCH v4 04/12] usb: phy: tegra: Support OTG mode programming Dmitry Osipenko
2021-07-17 12:11 ` [PATCH v4 05/12] usb: otg-fsm: Fix hrtimer list corruption Dmitry Osipenko
2021-07-17 12:11 ` [PATCH v4 06/12] dt-bindings: power: supply: smb347-charger: Document USB VBUS regulator Dmitry Osipenko
2021-07-17 12:11 ` [PATCH v4 07/12] power: supply: smb347-charger: Make smb347_set_writable() IRQ-safe Dmitry Osipenko
2021-07-17 12:11 ` [PATCH v4 08/12] power: supply: smb347-charger: Remove caching of charger state Dmitry Osipenko
2021-07-17 16:20   ` Sebastian Reichel
2021-07-17 17:29     ` Dmitry Osipenko
2021-07-17 12:11 ` [PATCH v4 09/12] power: supply: smb347-charger: Implement USB VBUS regulator Dmitry Osipenko
2021-07-17 12:11 ` [PATCH v4 10/12] ARM: tegra: Add new properties to USB PHY device-tree nodes Dmitry Osipenko
2021-07-17 12:11 ` [PATCH v4 11/12] ARM: tegra: nexus7: Enable USB OTG mode Dmitry Osipenko
2021-07-17 12:11 ` [PATCH v4 12/12] arm64: tegra132: Add new properties to USB PHY device-tree node Dmitry Osipenko

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).