[PATCH 5.4 49/71] usb: cdns3: Enable TDL_CHK only for OUT ep

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

From: Sanket Parmar <sparmar@cadence.com>

commit d6eef886903c4bb5af41b9a31d4ba11dc7a6f8e8 upstream.

ZLP gets stuck if TDL_CHK bit is set and TDL_FROM_TRB is used
as TDL source for IN endpoints. To fix it, TDL_CHK is only
enabled for OUT endpoints.

Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Reported-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Sanket Parmar <sparmar@cadence.com>
Link: https://lore.kernel.org/r/1621263912-13175-1-git-send-email-sparmar@cadence.com
Signed-off-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/cdns3/gadget.c |    8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

--- a/drivers/usb/cdns3/gadget.c
+++ b/drivers/usb/cdns3/gadget.c
@@ -1531,7 +1531,7 @@ void cdns3_configure_dmult(struct cdns3_
 		else
 			mask = BIT(priv_ep->num);
 
-		if (priv_ep->type != USB_ENDPOINT_XFER_ISOC) {
+		if (priv_ep->type != USB_ENDPOINT_XFER_ISOC  && !priv_ep->dir) {
 			cdns3_set_register_bit(&regs->tdl_from_trb, mask);
 			cdns3_set_register_bit(&regs->tdl_beh, mask);
 			cdns3_set_register_bit(&regs->tdl_beh2, mask);
@@ -1569,15 +1569,13 @@ void cdns3_ep_config(struct cdns3_endpoi
 	case USB_ENDPOINT_XFER_INT:
 		ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_INT);
 
-		if ((priv_dev->dev_ver == DEV_VER_V2 && !priv_ep->dir) ||
-		    priv_dev->dev_ver > DEV_VER_V2)
+		if (priv_dev->dev_ver >= DEV_VER_V2 && !priv_ep->dir)
 			ep_cfg |= EP_CFG_TDL_CHK;
 		break;
 	case USB_ENDPOINT_XFER_BULK:
 		ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_BULK);
 
-		if ((priv_dev->dev_ver == DEV_VER_V2  && !priv_ep->dir) ||
-		    priv_dev->dev_ver > DEV_VER_V2)
+		if (priv_dev->dev_ver >= DEV_VER_V2 && !priv_ep->dir)
 			ep_cfg |= EP_CFG_TDL_CHK;
 		break;
 	default: