linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Alexandru Ardelean <aardelean@deviqon.com>
Cc: linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
	denis.ciocca@st.com
Subject: Re: [PATCH 1/4] iio: pressure: st_pressure: use devm_iio_triggered_buffer_setup() for buffer
Date: Sat, 24 Jul 2021 16:43:01 +0100	[thread overview]
Message-ID: <20210724164301.54008712@jic23-huawei> (raw)
In-Reply-To: <20210720074642.223293-1-aardelean@deviqon.com>

On Tue, 20 Jul 2021 10:46:39 +0300
Alexandru Ardelean <aardelean@deviqon.com> wrote:

> The st_press_allocate_ring() function calls iio_triggered_buffer_setup() to
> allocate a triggered buffer.
> 
> But the same can be done with devm_iio_triggered_buffer_setup() and then
> the st_press_common_remove() no longer needs to manually deallocate it.
> 
> We know that the parent of the IIO device is used to manage other instances
> of the devm unwind, so it can be used in the st_press_allocate_ring() as
> well.

This raises an interesting point.  This driver mixes and matches between
hanging devm off the parent and off the iio_dev->dev.

That's probably not a good thing to do as it could lead to an odd unwind
order.  I'm pretty sure the changes here are fine, but we should take
a closer look...

Series applied to the togreg branch of iio.git and pushed out as testing.

You can do the same thing with the trigger with only slightly more complex
patch, but I'd like to discuss whether there are races because of the current
dev mix and match before that.

Thanks,

Jonathan


> 
> Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
> ---
>  drivers/iio/pressure/st_pressure.h        | 5 -----
>  drivers/iio/pressure/st_pressure_buffer.c | 9 ++-------
>  drivers/iio/pressure/st_pressure_core.c   | 6 +-----
>  3 files changed, 3 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/iio/pressure/st_pressure.h b/drivers/iio/pressure/st_pressure.h
> index 9417b3bd7513..156e6a72dc5c 100644
> --- a/drivers/iio/pressure/st_pressure.h
> +++ b/drivers/iio/pressure/st_pressure.h
> @@ -43,7 +43,6 @@ static __maybe_unused const struct st_sensors_platform_data default_press_pdata
>  
>  #ifdef CONFIG_IIO_BUFFER
>  int st_press_allocate_ring(struct iio_dev *indio_dev);
> -void st_press_deallocate_ring(struct iio_dev *indio_dev);
>  int st_press_trig_set_state(struct iio_trigger *trig, bool state);
>  #define ST_PRESS_TRIGGER_SET_STATE (&st_press_trig_set_state)
>  #else /* CONFIG_IIO_BUFFER */
> @@ -51,10 +50,6 @@ static inline int st_press_allocate_ring(struct iio_dev *indio_dev)
>  {
>  	return 0;
>  }
> -
> -static inline void st_press_deallocate_ring(struct iio_dev *indio_dev)
> -{
> -}
>  #define ST_PRESS_TRIGGER_SET_STATE NULL
>  #endif /* CONFIG_IIO_BUFFER */
>  
> diff --git a/drivers/iio/pressure/st_pressure_buffer.c b/drivers/iio/pressure/st_pressure_buffer.c
> index b651e7c31e90..25dbd5476b26 100644
> --- a/drivers/iio/pressure/st_pressure_buffer.c
> +++ b/drivers/iio/pressure/st_pressure_buffer.c
> @@ -41,13 +41,8 @@ static const struct iio_buffer_setup_ops st_press_buffer_setup_ops = {
>  
>  int st_press_allocate_ring(struct iio_dev *indio_dev)
>  {
> -	return iio_triggered_buffer_setup(indio_dev, NULL,
> -		&st_sensors_trigger_handler, &st_press_buffer_setup_ops);
> -}
> -
> -void st_press_deallocate_ring(struct iio_dev *indio_dev)
> -{
> -	iio_triggered_buffer_cleanup(indio_dev);
> +	return devm_iio_triggered_buffer_setup(indio_dev->dev.parent, indio_dev,
> +		NULL, &st_sensors_trigger_handler, &st_press_buffer_setup_ops);
>  }
>  
>  MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
> diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
> index 4ff6d40e3670..ab1c17fac807 100644
> --- a/drivers/iio/pressure/st_pressure_core.c
> +++ b/drivers/iio/pressure/st_pressure_core.c
> @@ -718,7 +718,7 @@ int st_press_common_probe(struct iio_dev *indio_dev)
>  		err = st_sensors_allocate_trigger(indio_dev,
>  						  ST_PRESS_TRIGGER_OPS);
>  		if (err < 0)
> -			goto st_press_probe_trigger_error;
> +			return err;
>  	}
>  
>  	err = iio_device_register(indio_dev);
> @@ -733,8 +733,6 @@ int st_press_common_probe(struct iio_dev *indio_dev)
>  st_press_device_register_error:
>  	if (press_data->irq > 0)
>  		st_sensors_deallocate_trigger(indio_dev);
> -st_press_probe_trigger_error:
> -	st_press_deallocate_ring(indio_dev);
>  	return err;
>  }
>  EXPORT_SYMBOL(st_press_common_probe);
> @@ -746,8 +744,6 @@ void st_press_common_remove(struct iio_dev *indio_dev)
>  	iio_device_unregister(indio_dev);
>  	if (press_data->irq > 0)
>  		st_sensors_deallocate_trigger(indio_dev);
> -
> -	st_press_deallocate_ring(indio_dev);
>  }
>  EXPORT_SYMBOL(st_press_common_remove);
>  


  parent reply	other threads:[~2021-07-24 15:40 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-20  7:46 [PATCH 1/4] iio: pressure: st_pressure: use devm_iio_triggered_buffer_setup() for buffer Alexandru Ardelean
2021-07-20  7:46 ` [PATCH 2/4] iio: accel: st_accel: " Alexandru Ardelean
2021-07-20  7:46 ` [PATCH 3/4] iio: magn: st_magn: " Alexandru Ardelean
2021-07-20  7:46 ` [PATCH 4/4] iio: gyro: st_gyro: " Alexandru Ardelean
2021-07-24 15:43 ` Jonathan Cameron [this message]
2021-07-26  6:48   ` [PATCH 1/4] iio: pressure: st_pressure: " Alexandru Ardelean

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210724164301.54008712@jic23-huawei \
    --to=jic23@kernel.org \
    --cc=aardelean@deviqon.com \
    --cc=denis.ciocca@st.com \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).