[PATCH 5.4 000/108] 5.4.136-rc1 review

[PATCH 5.4 000/108] 5.4.136-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.4.136 release.
There are 108 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 28 Jul 2021 15:38:12 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.136-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.4.136-rc1

Mathias Nyman <mathias.nyman@linux.intel.com>
    xhci: add xhci_get_virt_ep() helper

Riccardo Mancini <rickyman7@gmail.com>
    perf inject: Close inject.output on exit

Evan Quan <evan.quan@amd.com>
    PCI: Mark AMD Navi14 GPU ATS as broken

David Sterba <dsterba@suse.com>
    btrfs: compression: don't try to compress if we don't have enough pages

Stephan Gerhold <stephan@gerhold.net>
    iio: accel: bma180: Fix BMA25x bandwidth register values

Linus Walleij <linus.walleij@linaro.org>
    iio: accel: bma180: Use explicit member assignment

Doug Berger <opendmb@gmail.com>
    net: bcmgenet: ensure EXT_ENERGY_DET_MASK is clear

Marek Behún <kabel@kernel.org>
    net: dsa: mv88e6xxx: use correct .stats_set_histogram() on Topaz

Charles Baylis <cb-kernel@fishzet.co.uk>
    drm: Return -ENOTTY for non-drm ioctls

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    nds32: fix up stack guard gap

Ilya Dryomov <idryomov@gmail.com>
    rbd: always kick acquire on "acquired" and "released" notifications

Ilya Dryomov <idryomov@gmail.com>
    rbd: don't hold lock_rwsem while running_list is being drained

Mike Kravetz <mike.kravetz@oracle.com>
    hugetlbfs: fix mount mode command line processing

Peter Collingbourne <pcc@google.com>
    userfaultfd: do not untag user pointers

Peter Collingbourne <pcc@google.com>
    selftest: use mmap instead of posix_memalign to allocate memory

Markus Boehme <markubo@amazon.com>
    ixgbe: Fix packet corruption due to missing DMA sync

Gustavo A. R. Silva <gustavoars@kernel.org>
    media: ngene: Fix out-of-bounds bug in ngene_command_config_free_buf()

Anand Jain <anand.jain@oracle.com>
    btrfs: check for missing device in btrfs_trim_fs

Haoran Luo <www@aegistudio.net>
    tracing: Fix bug in rb_per_cpu_empty() that might cause deadloop.

Steven Rostedt (VMware) <rostedt@goodmis.org>
    tracing/histogram: Rename "cpu" to "common_cpu"

Marc Zyngier <maz@kernel.org>
    firmware/efi: Tell memblock about EFI iomem reservations

Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
    usb: dwc2: gadget: Fix sending zero length packet in DDMA mode.

John Keeping <john@metanate.com>
    USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick

Ian Ray <ian.ray@ge.com>
    USB: serial: cp210x: fix comments for GE CS1000

Marco De Marco <marco.demarco@posteo.net>
    USB: serial: option: add support for u-blox LARA-R6 family

Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
    usb: renesas_usbhs: Fix superfluous irqs happen after usb_pkt_pop()

Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
    usb: max-3421: Prevent corruption of freed memory

Julian Sikorski <belegdol@gmail.com>
    USB: usb-storage: Add LaCie Rugged USB3-FW to IGNORE_UAS

Mathias Nyman <mathias.nyman@linux.intel.com>
    usb: hub: Fix link power management max exit latency (MEL) calculations

Mathias Nyman <mathias.nyman@linux.intel.com>
    usb: hub: Disable USB 3 device initiated lpm if exit latency is too high

Nicholas Piggin <npiggin@gmail.com>
    KVM: PPC: Book3S HV Nested: Sanitise H_ENTER_NESTED TM state

Nicholas Piggin <npiggin@gmail.com>
    KVM: PPC: Book3S: Fix H_RTAS rets buffer overflow

Mathias Nyman <mathias.nyman@linux.intel.com>
    xhci: Fix lost USB 2 remote wake

Takashi Iwai <tiwai@suse.de>
    ALSA: hdmi: Expose all pins on MSI MS-7C94 board

Takashi Iwai <tiwai@suse.de>
    ALSA: sb: Fix potential ABBA deadlock in CSP driver

Alexander Tsoy <alexander@tsoy.me>
    ALSA: usb-audio: Add registration quirk for JBL Quantum headsets

Takashi Iwai <tiwai@suse.de>
    ALSA: usb-audio: Add missing proc text entry for BESPOKEN type

Alexander Egorenkov <egorenar@linux.ibm.com>
    s390/boot: fix use of expolines in the DMA code

Vasily Gorbik <gor@linux.ibm.com>
    s390/ftrace: fix ftrace_update_ftrace_func implementation

Huang Pei <huangpei@loongson.cn>
    Revert "MIPS: add PMD table accounting into MIPS'pmd_alloc_one"

Marcelo Henrique Cerri <marcelo.cerri@canonical.com>
    proc: Avoid mixing integer types in mem_rw()

Maxime Ripard <maxime@cerno.tech>
    drm/panel: raspberrypi-touchscreen: Prevent double-free

Yajun Deng <yajun.deng@linux.dev>
    net: sched: cls_api: Fix the the wrong parameter

Xin Long <lucien.xin@gmail.com>
    sctp: update active_key for asoc when old key is being replaced

Christoph Hellwig <hch@lst.de>
    nvme: set the PRACT bit when using Write Zeroes with T10 PI

Sayanta Pattanayak <sayanta.pattanayak@arm.com>
    r8169: Avoid duplicate sysfs entry creation error

David Howells <dhowells@redhat.com>
    afs: Fix tracepoint string placement with built-in AFS

Vincent Palatin <vpalatin@chromium.org>
    Revert "USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem"

Zhihao Cheng <chengzhihao1@huawei.com>
    nvme-pci: don't WARN_ON in nvme_reset_work if ctrl.state is not RESETTING

Paolo Abeni <pabeni@redhat.com>
    ipv6: fix another slab-out-of-bounds in fib6_nh_flush_exceptions

Peilin Ye <peilin.ye@bytedance.com>
    net/sched: act_skbmod: Skip non-Ethernet packets

Jian Shen <shenjian15@huawei.com>
    net: hns3: fix rx VLAN offload state inconsistent issue

Eric Dumazet <edumazet@google.com>
    net/tcp_fastopen: fix data races around tfo_active_disable_stamp

Randy Dunlap <rdunlap@infradead.org>
    net: hisilicon: rename CACHE_LINE_MASK to avoid redefinition

Somnath Kotur <somnath.kotur@broadcom.com>
    bnxt_en: Check abort error state in bnxt_half_open_nic()

Michael Chan <michael.chan@broadcom.com>
    bnxt_en: Add missing check for BNXT_STATE_ABORT_ERR in bnxt_fw_rset_task()

Michael Chan <michael.chan@broadcom.com>
    bnxt_en: Refresh RoCE capabilities in bnxt_ulp_probe()

Vasundhara Volam <vasundhara-v.volam@broadcom.com>
    bnxt_en: Improve bnxt_ulp_stop()/bnxt_ulp_start() call sequence.

Marek Vasut <marex@denx.de>
    spi: cadence: Correct initialisation of runtime PM again

Dmitry Bogdanov <d.bogdanov@yadro.com>
    scsi: target: Fix protect handling in WRITE SAME(32)

Mike Christie <michael.christie@oracle.com>
    scsi: iscsi: Fix iface sysfs attr detection

Nguyen Dinh Phi <phind.uet@gmail.com>
    netrom: Decrease sock refcount when sock timers expire

Pavel Skripkin <paskripkin@gmail.com>
    net: sched: fix memory leak in tcindex_partial_destroy_work

Nicholas Piggin <npiggin@gmail.com>
    KVM: PPC: Fix kvm_arch_vcpu_ioctl vcpu_load leak

Nicholas Piggin <npiggin@gmail.com>
    KVM: PPC: Book3S: Fix CONFIG_TRANSACTIONAL_MEM=n crash

Yajun Deng <yajun.deng@linux.dev>
    net: decnet: Fix sleeping inside in af_decnet

Michal Suchanek <msuchanek@suse.de>
    efi/tpm: Differentiate missing and invalid final event log table.

Ziyang Xuan <william.xuanziyang@huawei.com>
    net: fix uninit-value in caif_seqpkt_sendmsg

Tobias Klauser <tklauser@distanz.ch>
    bpftool: Check malloc return value in mount_bpffs_for_pin

John Fastabend <john.fastabend@gmail.com>
    bpf, sockmap, tcp: sk_prot needs inuse_idx set for proc stats

Colin Ian King <colin.king@canonical.com>
    s390/bpf: Perform r1 range checking before accessing jit->seen_reg[r1]

Colin Ian King <colin.king@canonical.com>
    liquidio: Fix unintentional sign extension issue on left shift of u16

Maxim Schwalm <maxim.schwalm@gmail.com>
    ASoC: rt5631: Fix regcache sync errors on resume

Peter Hess <peter.hess@ph-home.de>
    spi: mediatek: fix fifo rx mode

Axel Lin <axel.lin@ingics.com>
    regulator: hi6421: Fix getting wrong drvdata

Axel Lin <axel.lin@ingics.com>
    regulator: hi6421: Use correct variable type for regmap api val argument

Alain Volmat <alain.volmat@foss.st.com>
    spi: stm32: fixes pm_runtime calls in probe/remove

Peter Ujfalusi <peter.ujfalusi@ti.com>
    spi: stm32: Use dma_request_chan() instead dma_request_slave_channel()

Clark Wang <xiaoning.wang@nxp.com>
    spi: imx: add a check for speed_hz before calculating the clock

Riccardo Mancini <rickyman7@gmail.com>
    perf data: Close all files in close_dir()

Riccardo Mancini <rickyman7@gmail.com>
    perf probe-file: Delete namelist in del_events() on the error path

Riccardo Mancini <rickyman7@gmail.com>
    perf lzma: Close lzma stream on exit

Riccardo Mancini <rickyman7@gmail.com>
    perf script: Fix memory 'threads' and 'cpus' leaks on exit

Riccardo Mancini <rickyman7@gmail.com>
    perf dso: Fix memory leak in dso__new_map()

Riccardo Mancini <rickyman7@gmail.com>
    perf test event_update: Fix memory leak of evlist

Riccardo Mancini <rickyman7@gmail.com>
    perf test session_topology: Delete session->evlist

Riccardo Mancini <rickyman7@gmail.com>
    perf env: Fix sibling_dies memory leak

Riccardo Mancini <rickyman7@gmail.com>
    perf probe: Fix dso->nsinfo refcounting

Riccardo Mancini <rickyman7@gmail.com>
    perf map: Fix dso->nsinfo refcounting

Casey Chen <cachen@purestorage.com>
    nvme-pci: do not call nvme_dev_remove_admin from nvme_remove

Shahjada Abul Husain <shahjada@chelsio.com>
    cxgb4: fix IRQ free race during driver unload

Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
    pwm: sprd: Ensure configuring period and duty_cycle isn't wrongly skipped

Hangbin Liu <liuhangbin@gmail.com>
    selftests: icmp_redirect: IPv6 PMTU info should be cleared after redirect

Hangbin Liu <liuhangbin@gmail.com>
    selftests: icmp_redirect: remove from checking for IPv6 route get

Nicolas Dichtel <nicolas.dichtel@6wind.com>
    ipv6: fix 'disable_policy' for fwd packets

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    gve: Fix an error handling path in 'gve_probe()'

Jedrzej Jagielski <jedrzej.jagielski@intel.com>
    igb: Fix position of assignment to *ring

Aleksandr Loktionov <aleksandr.loktionov@intel.com>
    igb: Check if num of q_vectors is smaller than max before array access

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    iavf: Fix an error handling path in 'iavf_probe()'

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    e1000e: Fix an error handling path in 'e1000_probe()'

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    fm10k: Fix an error handling path in 'fm10k_probe()'

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    igb: Fix an error handling path in 'igb_probe()'

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    igc: Fix an error handling path in 'igc_probe()'

Sasha Neftin <sasha.neftin@intel.com>
    igc: Prefer to use the pci_release_mem_regions method

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    ixgbe: Fix an error handling path in 'ixgbe_probe()'

Tom Rix <trix@redhat.com>
    igc: change default return of igc_read_phy_reg()

Vinicius Costa Gomes <vinicius.gomes@intel.com>
    igb: Fix use-after-free error during reset

Vinicius Costa Gomes <vinicius.gomes@intel.com>
    igc: Fix use-after-free error during reset


-------------

Diffstat:

 Documentation/arm64/tagged-address-abi.rst         |  26 +++--
 Documentation/trace/histogram.rst                  |   2 +-
 Makefile                                           |   4 +-
 arch/mips/include/asm/pgalloc.h                    |  10 +-
 arch/nds32/mm/mmap.c                               |   2 +-
 arch/powerpc/kvm/book3s_hv.c                       |   2 +
 arch/powerpc/kvm/book3s_hv_nested.c                |  20 ++++
 arch/powerpc/kvm/book3s_rtas.c                     |  25 ++++-
 arch/powerpc/kvm/powerpc.c                         |   4 +-
 arch/s390/boot/text_dma.S                          |  19 +---
 arch/s390/include/asm/ftrace.h                     |   1 +
 arch/s390/kernel/ftrace.c                          |   2 +
 arch/s390/kernel/mcount.S                          |   4 +-
 arch/s390/net/bpf_jit_comp.c                       |   2 +-
 drivers/block/rbd.c                                |  32 +++---
 drivers/firmware/efi/efi.c                         |  13 ++-
 drivers/firmware/efi/tpm.c                         |   8 +-
 drivers/gpu/drm/drm_ioctl.c                        |   3 +
 .../gpu/drm/panel/panel-raspberrypi-touchscreen.c  |   1 -
 drivers/iio/accel/bma180.c                         |  75 ++++++++-----
 drivers/media/pci/ngene/ngene-core.c               |   2 +-
 drivers/media/pci/ngene/ngene.h                    |  14 +--
 drivers/net/dsa/mv88e6xxx/chip.c                   |   4 +-
 drivers/net/ethernet/broadcom/bnxt/bnxt.c          |  28 +++--
 drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c      |  19 ++--
 drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.h      |   3 +-
 drivers/net/ethernet/broadcom/genet/bcmgenet.c     |  16 +--
 drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c |   6 --
 .../ethernet/cavium/liquidio/cn23xx_pf_device.c    |   2 +-
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c    |  18 ++--
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c     |   3 +
 drivers/net/ethernet/google/gve/gve_main.c         |   5 +-
 drivers/net/ethernet/hisilicon/hip04_eth.c         |   6 +-
 .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c  |  10 ++
 drivers/net/ethernet/intel/e1000e/netdev.c         |   1 +
 drivers/net/ethernet/intel/fm10k/fm10k_pci.c       |   1 +
 drivers/net/ethernet/intel/iavf/iavf_main.c        |   1 +
 drivers/net/ethernet/intel/igb/igb_main.c          |  15 ++-
 drivers/net/ethernet/intel/igc/igc.h               |   2 +-
 drivers/net/ethernet/intel/igc/igc_main.c          |   6 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c      |   4 +-
 drivers/net/ethernet/realtek/r8169_main.c          |   3 +-
 drivers/nvme/host/core.c                           |   5 +-
 drivers/nvme/host/pci.c                            |   5 +-
 drivers/pci/quirks.c                               |   4 +-
 drivers/pwm/pwm-sprd.c                             |  11 +-
 drivers/regulator/hi6421-regulator.c               |  30 +++---
 drivers/scsi/scsi_transport_iscsi.c                |  90 ++++++----------
 drivers/spi/spi-cadence.c                          |  14 ++-
 drivers/spi/spi-imx.c                              |  37 ++++---
 drivers/spi/spi-mt65xx.c                           |  16 ++-
 drivers/spi/spi-stm32.c                            |  41 +++++--
 drivers/target/target_core_sbc.c                   |  35 +++---
 drivers/usb/core/hub.c                             | 120 ++++++++++++++-------
 drivers/usb/core/quirks.c                          |   4 -
 drivers/usb/dwc2/gadget.c                          |  10 +-
 drivers/usb/host/max3421-hcd.c                     |  44 +++-----
 drivers/usb/host/xhci-hub.c                        |   3 +-
 drivers/usb/host/xhci-ring.c                       |  58 +++++++---
 drivers/usb/host/xhci.h                            |   3 +-
 drivers/usb/renesas_usbhs/fifo.c                   |   7 ++
 drivers/usb/serial/cp210x.c                        |   5 +-
 drivers/usb/serial/option.c                        |   3 +
 drivers/usb/storage/unusual_uas.h                  |   7 ++
 fs/afs/cmservice.c                                 |  25 ++---
 fs/btrfs/extent-tree.c                             |   3 +
 fs/btrfs/inode.c                                   |   2 +-
 fs/hugetlbfs/inode.c                               |   2 +-
 fs/proc/base.c                                     |   2 +-
 fs/userfaultfd.c                                   |  22 ++--
 include/drm/drm_ioctl.h                            |   1 +
 include/trace/events/afs.h                         |  67 +++++++++++-
 kernel/trace/ring_buffer.c                         |  28 ++++-
 kernel/trace/trace.c                               |   4 +
 kernel/trace/trace_events_hist.c                   |  22 ++--
 net/caif/caif_socket.c                             |   3 +-
 net/decnet/af_decnet.c                             |  27 +++--
 net/ipv4/tcp_bpf.c                                 |   2 +-
 net/ipv4/tcp_fastopen.c                            |  19 +++-
 net/ipv6/ip6_output.c                              |   4 +-
 net/ipv6/route.c                                   |   2 +-
 net/netrom/nr_timer.c                              |  20 ++--
 net/sched/act_skbmod.c                             |  12 ++-
 net/sched/cls_api.c                                |   2 +-
 net/sched/cls_tcindex.c                            |   5 +-
 net/sctp/auth.c                                    |   2 +
 sound/isa/sb/sb16_csp.c                            |   4 +
 sound/pci/hda/patch_hdmi.c                         |   1 +
 sound/soc/codecs/rt5631.c                          |   2 +
 sound/usb/mixer.c                                  |  10 +-
 sound/usb/quirks.c                                 |   3 +
 tools/bpf/bpftool/common.c                         |   5 +
 tools/perf/builtin-inject.c                        |   8 +-
 tools/perf/builtin-script.c                        |   7 ++
 tools/perf/tests/event_update.c                    |   2 +-
 tools/perf/tests/topology.c                        |   1 +
 tools/perf/util/data.c                             |   2 +-
 tools/perf/util/dso.c                              |   4 +-
 tools/perf/util/env.c                              |   1 +
 tools/perf/util/lzma.c                             |   8 +-
 tools/perf/util/map.c                              |   2 +
 tools/perf/util/probe-event.c                      |   4 +-
 tools/perf/util/probe-file.c                       |   4 +-
 tools/testing/selftests/net/icmp_redirect.sh       |   5 +-
 tools/testing/selftests/vm/userfaultfd.c           |   6 +-
 105 files changed, 849 insertions(+), 482 deletions(-)

[PATCH 5.4 001/108] igc: Fix use-after-free error during reset

[Greg Kroah-Hartman]

From: Vinicius Costa Gomes <vinicius.gomes@intel.com>

[ Upstream commit 56ea7ed103b46970e171eb1c95916f393d64eeff ]

Cleans the next descriptor to watch (next_to_watch) when cleaning the
TX ring.

Failure to do so can cause invalid memory accesses. If igc_poll() runs
while the controller is being reset this can lead to the driver try to
free a skb that was already freed.

Log message:

 [  101.525242] refcount_t: underflow; use-after-free.
 [  101.525251] WARNING: CPU: 1 PID: 646 at lib/refcount.c:28 refcount_warn_saturate+0xab/0xf0
 [  101.525259] Modules linked in: sch_etf(E) sch_mqprio(E) rfkill(E) intel_rapl_msr(E) intel_rapl_common(E)
 x86_pkg_temp_thermal(E) intel_powerclamp(E) coretemp(E) binfmt_misc(E) kvm_intel(E) kvm(E) irqbypass(E) crc32_pclmul(E)
 ghash_clmulni_intel(E) aesni_intel(E) mei_wdt(E) libaes(E) crypto_simd(E) cryptd(E) glue_helper(E) snd_hda_codec_hdmi(E)
 rapl(E) intel_cstate(E) snd_hda_intel(E) snd_intel_dspcfg(E) sg(E) soundwire_intel(E) intel_uncore(E) at24(E)
 soundwire_generic_allocation(E) iTCO_wdt(E) soundwire_cadence(E) intel_pmc_bxt(E) serio_raw(E) snd_hda_codec(E)
 iTCO_vendor_support(E) watchdog(E) snd_hda_core(E) snd_hwdep(E) snd_soc_core(E) snd_compress(E) snd_pcsp(E)
 soundwire_bus(E) snd_pcm(E) evdev(E) snd_timer(E) mei_me(E) snd(E) soundcore(E) mei(E) configfs(E) ip_tables(E) x_tables(E)
 autofs4(E) ext4(E) crc32c_generic(E) crc16(E) mbcache(E) jbd2(E) sd_mod(E) t10_pi(E) crc_t10dif(E) crct10dif_generic(E)
 i915(E) ahci(E) libahci(E) ehci_pci(E) igb(E) xhci_pci(E) ehci_hcd(E)
 [  101.525303]  drm_kms_helper(E) dca(E) xhci_hcd(E) libata(E) crct10dif_pclmul(E) cec(E) crct10dif_common(E) tsn(E) igc(E)
 e1000e(E) ptp(E) i2c_i801(E) crc32c_intel(E) psmouse(E) i2c_algo_bit(E) i2c_smbus(E) scsi_mod(E) lpc_ich(E) pps_core(E)
 usbcore(E) drm(E) button(E) video(E)
 [  101.525318] CPU: 1 PID: 646 Comm: irq/37-enp7s0-T Tainted: G            E     5.10.30-rt37-tsn1-rt-ipipe #ipipe
 [  101.525320] Hardware name: SIEMENS AG SIMATIC IPC427D/A5E31233588, BIOS V17.02.09 03/31/2017
 [  101.525322] RIP: 0010:refcount_warn_saturate+0xab/0xf0
 [  101.525325] Code: 05 31 48 44 01 01 e8 f0 c6 42 00 0f 0b c3 80 3d 1f 48 44 01 00 75 90 48 c7 c7 78 a8 f3 a6 c6 05 0f 48
 44 01 01 e8 d1 c6 42 00 <0f> 0b c3 80 3d fe 47 44 01 00 0f 85 6d ff ff ff 48 c7 c7 d0 a8 f3
 [  101.525327] RSP: 0018:ffffbdedc0917cb8 EFLAGS: 00010286
 [  101.525329] RAX: 0000000000000000 RBX: ffff98fd6becbf40 RCX: 0000000000000001
 [  101.525330] RDX: 0000000000000001 RSI: ffffffffa6f2700c RDI: 00000000ffffffff
 [  101.525332] RBP: ffff98fd6becc14c R08: ffffffffa7463d00 R09: ffffbdedc0917c50
 [  101.525333] R10: ffffffffa74c3578 R11: 0000000000000034 R12: 00000000ffffff00
 [  101.525335] R13: ffff98fd6b0b1000 R14: 0000000000000039 R15: ffff98fd6be35c40
 [  101.525337] FS:  0000000000000000(0000) GS:ffff98fd6e240000(0000) knlGS:0000000000000000
 [  101.525339] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 [  101.525341] CR2: 00007f34135a3a70 CR3: 0000000150210003 CR4: 00000000001706e0
 [  101.525343] Call Trace:
 [  101.525346]  sock_wfree+0x9c/0xa0
 [  101.525353]  unix_destruct_scm+0x7b/0xa0
 [  101.525358]  skb_release_head_state+0x40/0x90
 [  101.525362]  skb_release_all+0xe/0x30
 [  101.525364]  napi_consume_skb+0x57/0x160
 [  101.525367]  igc_poll+0xb7/0xc80 [igc]
 [  101.525376]  ? sched_clock+0x5/0x10
 [  101.525381]  ? sched_clock_cpu+0xe/0x100
 [  101.525385]  net_rx_action+0x14c/0x410
 [  101.525388]  __do_softirq+0xe9/0x2f4
 [  101.525391]  __local_bh_enable_ip+0xe3/0x110
 [  101.525395]  ? irq_finalize_oneshot.part.47+0xe0/0xe0
 [  101.525398]  irq_forced_thread_fn+0x6a/0x80
 [  101.525401]  irq_thread+0xe8/0x180
 [  101.525403]  ? wake_threads_waitq+0x30/0x30
 [  101.525406]  ? irq_thread_check_affinity+0xd0/0xd0
 [  101.525408]  kthread+0x183/0x1a0
 [  101.525412]  ? kthread_park+0x80/0x80
 [  101.525415]  ret_from_fork+0x22/0x30

Fixes: 13b5b7fd6a4a ("igc: Add support for Tx/Rx rings")
Reported-by: Erez Geva <erez.geva.ext@siemens.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igc/igc_main.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index 6b43e1c5b1c3..8c2813963e55 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -256,6 +256,8 @@ static void igc_clean_tx_ring(struct igc_ring *tx_ring)
 					       DMA_TO_DEVICE);
 		}
 
+		tx_buffer->next_to_watch = NULL;
+
 		/* move us one more past the eop_desc for start of next pkt */
 		tx_buffer++;
 		i++;
-- 
2.30.2

[PATCH 5.4 002/108] igb: Fix use-after-free error during reset

[Greg Kroah-Hartman]

From: Vinicius Costa Gomes <vinicius.gomes@intel.com>

[ Upstream commit 7b292608db23ccbbfbfa50cdb155d01725d7a52e ]

Cleans the next descriptor to watch (next_to_watch) when cleaning the
TX ring.

Failure to do so can cause invalid memory accesses. If igb_poll() runs
while the controller is reset this can lead to the driver try to free
a skb that was already freed.

(The crash is harder to reproduce with the igb driver, but the same
potential problem exists as the code is identical to igc)

Fixes: 7cc6fd4c60f2 ("igb: Don't bother clearing Tx buffer_info in igb_clean_tx_ring")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reported-by: Erez Geva <erez.geva.ext@siemens.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index c37f0590b3a4..09f2338084e7 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -4657,6 +4657,8 @@ static void igb_clean_tx_ring(struct igb_ring *tx_ring)
 					       DMA_TO_DEVICE);
 		}
 
+		tx_buffer->next_to_watch = NULL;
+
 		/* move us one more past the eop_desc for start of next pkt */
 		tx_buffer++;
 		i++;
-- 
2.30.2

[PATCH 5.4 003/108] igc: change default return of igc_read_phy_reg()

[Greg Kroah-Hartman]

From: Tom Rix <trix@redhat.com>

[ Upstream commit 05682a0a61b6cbecd97a0f37f743b2cbfd516977 ]

Static analysis reports this problem

igc_main.c:4944:20: warning: The left operand of '&'
  is a garbage value
    if (!(phy_data & SR_1000T_REMOTE_RX_STATUS) &&
          ~~~~~~~~ ^

phy_data is set by the call to igc_read_phy_reg() only if
there is a read_reg() op, else it is unset and a 0 is
returned.  Change the return to -EOPNOTSUPP.

Fixes: 208983f099d9 ("igc: Add watchdog")
Signed-off-by: Tom Rix <trix@redhat.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igc/igc.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/igc/igc.h b/drivers/net/ethernet/intel/igc/igc.h
index 7e16345d836e..aec998c82b69 100644
--- a/drivers/net/ethernet/intel/igc/igc.h
+++ b/drivers/net/ethernet/intel/igc/igc.h
@@ -504,7 +504,7 @@ static inline s32 igc_read_phy_reg(struct igc_hw *hw, u32 offset, u16 *data)
 	if (hw->phy.ops.read_reg)
 		return hw->phy.ops.read_reg(hw, offset, data);
 
-	return 0;
+	return -EOPNOTSUPP;
 }
 
 /* forward declaration */
-- 
2.30.2

[PATCH 5.4 004/108] ixgbe: Fix an error handling path in ixgbe_probe()

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit dd2aefcd5e37989ae5f90afdae44bbbf3a2990da ]

If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it
must be undone by a corresponding 'pci_disable_pcie_error_reporting()'
call, as already done in the remove function.

Fixes: 6fabd715e6d8 ("ixgbe: Implement PCIe AER support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 1b8e70585c44..71b77ce60b07 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -11207,6 +11207,7 @@ err_ioremap:
 	disable_dev = !test_and_set_bit(__IXGBE_DISABLED, &adapter->state);
 	free_netdev(netdev);
 err_alloc_etherdev:
+	pci_disable_pcie_error_reporting(pdev);
 	pci_release_mem_regions(pdev);
 err_pci_reg:
 err_dma:
-- 
2.30.2

[PATCH 5.4 005/108] igc: Prefer to use the pci_release_mem_regions method

[Greg Kroah-Hartman]

From: Sasha Neftin <sasha.neftin@intel.com>

[ Upstream commit faf4dd52e9e34a36254a6ad43369064b6928d504 ]

Use the pci_release_mem_regions method instead of the
pci_release_selected_regions method

Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igc/igc_main.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index 8c2813963e55..606c1abafa7d 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -4312,8 +4312,7 @@ err_sw_init:
 err_ioremap:
 	free_netdev(netdev);
 err_alloc_etherdev:
-	pci_release_selected_regions(pdev,
-				     pci_select_bars(pdev, IORESOURCE_MEM));
+	pci_release_mem_regions(pdev);
 err_pci_reg:
 err_dma:
 	pci_disable_device(pdev);
-- 
2.30.2

[PATCH 5.4 006/108] igc: Fix an error handling path in igc_probe()

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit c6bc9e5ce5d37cb3e6b552f41b92a193db1806ab ]

If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it
must be undone by a corresponding 'pci_disable_pcie_error_reporting()'
call, as already done in the remove function.

Fixes: c9a11c23ceb6 ("igc: Add netdev")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igc/igc_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index 606c1abafa7d..084cf4a4114a 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -4312,6 +4312,7 @@ err_sw_init:
 err_ioremap:
 	free_netdev(netdev);
 err_alloc_etherdev:
+	pci_disable_pcie_error_reporting(pdev);
 	pci_release_mem_regions(pdev);
 err_pci_reg:
 err_dma:
-- 
2.30.2

[PATCH 5.4 007/108] igb: Fix an error handling path in igb_probe()

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit fea03b1cebd653cd095f2e9a58cfe1c85661c363 ]

If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it
must be undone by a corresponding 'pci_disable_pcie_error_reporting()'
call, as already done in the remove function.

Fixes: 40a914fa72ab ("igb: Add support for pci-e Advanced Error Reporting")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 09f2338084e7..bf8da4869c0f 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -3469,6 +3469,7 @@ err_sw_init:
 err_ioremap:
 	free_netdev(netdev);
 err_alloc_etherdev:
+	pci_disable_pcie_error_reporting(pdev);
 	pci_release_mem_regions(pdev);
 err_pci_reg:
 err_dma:
-- 
2.30.2

[PATCH 5.4 008/108] fm10k: Fix an error handling path in fm10k_probe()

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit e85e14d68f517ef12a5fb8123fff65526b35b6cd ]

If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it
must be undone by a corresponding 'pci_disable_pcie_error_reporting()'
call, as already done in the remove function.

Fixes: 19ae1b3fb99c ("fm10k: Add support for PCI power management and error handling")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/fm10k/fm10k_pci.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c
index bb236fa44048..36b016308c62 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c
@@ -2230,6 +2230,7 @@ err_sw_init:
 err_ioremap:
 	free_netdev(netdev);
 err_alloc_netdev:
+	pci_disable_pcie_error_reporting(pdev);
 	pci_release_mem_regions(pdev);
 err_pci_reg:
 err_dma:
-- 
2.30.2

[PATCH 5.4 009/108] e1000e: Fix an error handling path in e1000_probe()

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 4589075608420bc49fcef6e98279324bf2bb91ae ]

If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it
must be undone by a corresponding 'pci_disable_pcie_error_reporting()'
call, as already done in the remove function.

Fixes: 111b9dc5c981 ("e1000e: add aer support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/e1000e/netdev.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index a06d514215ed..cbd83bb5c1ac 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -7401,6 +7401,7 @@ err_flashmap:
 err_ioremap:
 	free_netdev(netdev);
 err_alloc_etherdev:
+	pci_disable_pcie_error_reporting(pdev);
 	pci_release_mem_regions(pdev);
 err_pci_reg:
 err_dma:
-- 
2.30.2

[PATCH 5.4 010/108] iavf: Fix an error handling path in iavf_probe()

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit af30cbd2f4d6d66a9b6094e0aa32420bc8b20e08 ]

If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it
must be undone by a corresponding 'pci_disable_pcie_error_reporting()'
call, as already done in the remove function.

Fixes: 5eae00c57f5e ("i40evf: main driver core")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/iavf/iavf_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c
index a97e1f9ca1ed..cda9b9a8392a 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_main.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_main.c
@@ -3765,6 +3765,7 @@ static int iavf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 err_ioremap:
 	free_netdev(netdev);
 err_alloc_etherdev:
+	pci_disable_pcie_error_reporting(pdev);
 	pci_release_regions(pdev);
 err_pci_reg:
 err_dma:
-- 
2.30.2

[PATCH 5.4 011/108] igb: Check if num of q_vectors is smaller than max before array access

[Greg Kroah-Hartman]

From: Aleksandr Loktionov <aleksandr.loktionov@intel.com>

[ Upstream commit 6c19d772618fea40d9681f259368f284a330fd90 ]

Ensure that the adapter->q_vector[MAX_Q_VECTORS] array isn't accessed
beyond its size. It was fixed by using a local variable num_q_vectors
as a limit for loop index, and ensure that num_q_vectors is not bigger
than MAX_Q_VECTORS.

Fixes: 047e0030f1e6 ("igb: add new data structure for handling interrupts and NAPI")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Slawomir Laba <slawomirx.laba@intel.com>
Reviewed-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Reviewed-by: Mateusz Palczewski <mateusz.placzewski@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index bf8da4869c0f..35b096ab2893 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -940,6 +940,7 @@ static void igb_configure_msix(struct igb_adapter *adapter)
  **/
 static int igb_request_msix(struct igb_adapter *adapter)
 {
+	unsigned int num_q_vectors = adapter->num_q_vectors;
 	struct net_device *netdev = adapter->netdev;
 	int i, err = 0, vector = 0, free_vector = 0;
 
@@ -948,7 +949,13 @@ static int igb_request_msix(struct igb_adapter *adapter)
 	if (err)
 		goto err_out;
 
-	for (i = 0; i < adapter->num_q_vectors; i++) {
+	if (num_q_vectors > MAX_Q_VECTORS) {
+		num_q_vectors = MAX_Q_VECTORS;
+		dev_warn(&adapter->pdev->dev,
+			 "The number of queue vectors (%d) is higher than max allowed (%d)\n",
+			 adapter->num_q_vectors, MAX_Q_VECTORS);
+	}
+	for (i = 0; i < num_q_vectors; i++) {
 		struct igb_q_vector *q_vector = adapter->q_vector[i];
 
 		vector++;
-- 
2.30.2

[PATCH 5.4 012/108] igb: Fix position of assignment to *ring

[Greg Kroah-Hartman]

From: Jedrzej Jagielski <jedrzej.jagielski@intel.com>

[ Upstream commit 382a7c20d9253bcd5715789b8179528d0f3de72c ]

Assignment to *ring should be done after correctness check of the
argument queue.

Fixes: 91db364236c8 ("igb: Refactor igb_configure_cbs()")
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 35b096ab2893..158feb0ab273 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -1694,14 +1694,15 @@ static bool is_any_txtime_enabled(struct igb_adapter *adapter)
  **/
 static void igb_config_tx_modes(struct igb_adapter *adapter, int queue)
 {
-	struct igb_ring *ring = adapter->tx_ring[queue];
 	struct net_device *netdev = adapter->netdev;
 	struct e1000_hw *hw = &adapter->hw;
+	struct igb_ring *ring;
 	u32 tqavcc, tqavctrl;
 	u16 value;
 
 	WARN_ON(hw->mac.type != e1000_i210);
 	WARN_ON(queue < 0 || queue > 1);
+	ring = adapter->tx_ring[queue];
 
 	/* If any of the Qav features is enabled, configure queues as SR and
 	 * with HIGH PRIO. If none is, then configure them with LOW PRIO and
-- 
2.30.2

[PATCH 5.4 013/108] gve: Fix an error handling path in gve_probe()

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 2342ae10d1272d411a468a85a67647dd115b344f ]

If the 'register_netdev() call fails, we must release the resources
allocated by the previous 'gve_init_priv()' call, as already done in the
remove function.

Add a new label and the missing 'gve_teardown_priv_resources()' in the
error handling path.

Fixes: 893ce44df565 ("gve: Add basic driver framework for Compute Engine Virtual NIC")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/google/gve/gve_main.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c
index 1c4b35b1b359..f8dfa7501f65 100644
--- a/drivers/net/ethernet/google/gve/gve_main.c
+++ b/drivers/net/ethernet/google/gve/gve_main.c
@@ -1170,13 +1170,16 @@ static int gve_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	err = register_netdev(dev);
 	if (err)
-		goto abort_with_wq;
+		goto abort_with_gve_init;
 
 	dev_info(&pdev->dev, "GVE version %s\n", gve_version_str);
 	gve_clear_probe_in_progress(priv);
 	queue_work(priv->gve_wq, &priv->service_task);
 	return 0;
 
+abort_with_gve_init:
+	gve_teardown_priv_resources(priv);
+
 abort_with_wq:
 	destroy_workqueue(priv->gve_wq);
 
-- 
2.30.2

[PATCH 5.4 014/108] ipv6: fix disable_policy for fwd packets

[Greg Kroah-Hartman]

From: Nicolas Dichtel <nicolas.dichtel@6wind.com>

[ Upstream commit ccd27f05ae7b8ebc40af5b004e94517a919aa862 ]

The goal of commit df789fe75206 ("ipv6: Provide ipv6 version of
"disable_policy" sysctl") was to have the disable_policy from ipv4
available on ipv6.
However, it's not exactly the same mechanism. On IPv4, all packets coming
from an interface, which has disable_policy set, bypass the policy check.
For ipv6, this is done only for local packets, ie for packets destinated to
an address configured on the incoming interface.

Let's align ipv6 with ipv4 so that the 'disable_policy' sysctl has the same
effect for both protocols.

My first approach was to create a new kind of route cache entries, to be
able to set DST_NOPOLICY without modifying routes. This would have added a
lot of code. Because the local delivery path is already handled, I choose
to focus on the forwarding path to minimize code churn.

Fixes: df789fe75206 ("ipv6: Provide ipv6 version of "disable_policy" sysctl")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/ip6_output.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 4dcbb1ccab25..33444d985681 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -477,7 +477,9 @@ int ip6_forward(struct sk_buff *skb)
 	if (skb_warn_if_lro(skb))
 		goto drop;
 
-	if (!xfrm6_policy_check(NULL, XFRM_POLICY_FWD, skb)) {
+	if (!net->ipv6.devconf_all->disable_policy &&
+	    !idev->cnf.disable_policy &&
+	    !xfrm6_policy_check(NULL, XFRM_POLICY_FWD, skb)) {
 		__IP6_INC_STATS(net, idev, IPSTATS_MIB_INDISCARDS);
 		goto drop;
 	}
-- 
2.30.2

[PATCH 5.4 015/108] selftests: icmp_redirect: remove from checking for IPv6 route get

[Greg Kroah-Hartman]

From: Hangbin Liu <liuhangbin@gmail.com>

[ Upstream commit 24b671aad4eae423e1abf5b7f08d9a5235458b8d ]

If the kernel doesn't enable option CONFIG_IPV6_SUBTREES, the RTA_SRC
info will not be exported to userspace in rt6_fill_node(). And ip cmd will
not print "from ::" to the route output. So remove this check.

Fixes: ec8105352869 ("selftests: Add redirect tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/net/icmp_redirect.sh | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/net/icmp_redirect.sh b/tools/testing/selftests/net/icmp_redirect.sh
index bf361f30d6ef..bfcabee50155 100755
--- a/tools/testing/selftests/net/icmp_redirect.sh
+++ b/tools/testing/selftests/net/icmp_redirect.sh
@@ -311,7 +311,7 @@ check_exception()
 
 	if [ "$with_redirect" = "yes" ]; then
 		ip -netns h1 -6 ro get ${H1_VRF_ARG} ${H2_N2_IP6} | \
-		grep -q "${H2_N2_IP6} from :: via ${R2_LLADDR} dev br0.*${mtu}"
+		grep -q "${H2_N2_IP6} .*via ${R2_LLADDR} dev br0.*${mtu}"
 	elif [ -n "${mtu}" ]; then
 		ip -netns h1 -6 ro get ${H1_VRF_ARG} ${H2_N2_IP6} | \
 		grep -q "${mtu}"
-- 
2.30.2

[PATCH 5.4 016/108] selftests: icmp_redirect: IPv6 PMTU info should be cleared after redirect

[Greg Kroah-Hartman]

From: Hangbin Liu <liuhangbin@gmail.com>

[ Upstream commit 0e02bf5de46ae30074a2e1a8194a422a84482a1a ]

After redirecting, it's already a new path. So the old PMTU info should
be cleared. The IPv6 test "mtu exception plus redirect" should only
has redirect info without old PMTU.

The IPv4 test can not be changed because of legacy.

Fixes: ec8105352869 ("selftests: Add redirect tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/net/icmp_redirect.sh | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/tools/testing/selftests/net/icmp_redirect.sh b/tools/testing/selftests/net/icmp_redirect.sh
index bfcabee50155..104a7a5f13b1 100755
--- a/tools/testing/selftests/net/icmp_redirect.sh
+++ b/tools/testing/selftests/net/icmp_redirect.sh
@@ -309,9 +309,10 @@ check_exception()
 	fi
 	log_test $? 0 "IPv4: ${desc}"
 
-	if [ "$with_redirect" = "yes" ]; then
+	# No PMTU info for test "redirect" and "mtu exception plus redirect"
+	if [ "$with_redirect" = "yes" ] && [ "$desc" != "redirect exception plus mtu" ]; then
 		ip -netns h1 -6 ro get ${H1_VRF_ARG} ${H2_N2_IP6} | \
-		grep -q "${H2_N2_IP6} .*via ${R2_LLADDR} dev br0.*${mtu}"
+		grep -v "mtu" | grep -q "${H2_N2_IP6} .*via ${R2_LLADDR} dev br0"
 	elif [ -n "${mtu}" ]; then
 		ip -netns h1 -6 ro get ${H1_VRF_ARG} ${H2_N2_IP6} | \
 		grep -q "${mtu}"
-- 
2.30.2

[PATCH 5.4 017/108] pwm: sprd: Ensure configuring period and duty_cycle isnt wrongly skipped

[Greg Kroah-Hartman]

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit 65e2e6c1c20104ed19060a38f4edbf14e9f9a9a5 ]

As the last call to sprd_pwm_apply() might have exited early if
state->enabled was false, the values for period and duty_cycle stored in
pwm->state might not have been written to hardware and it must be
ensured that they are configured before enabling the PWM.

Fixes: 8aae4b02e8a6 ("pwm: sprd: Add Spreadtrum PWM support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pwm/pwm-sprd.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/pwm/pwm-sprd.c b/drivers/pwm/pwm-sprd.c
index be2394227423..892d853d48a1 100644
--- a/drivers/pwm/pwm-sprd.c
+++ b/drivers/pwm/pwm-sprd.c
@@ -180,13 +180,10 @@ static int sprd_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 			}
 		}
 
-		if (state->period != cstate->period ||
-		    state->duty_cycle != cstate->duty_cycle) {
-			ret = sprd_pwm_config(spc, pwm, state->duty_cycle,
-					      state->period);
-			if (ret)
-				return ret;
-		}
+		ret = sprd_pwm_config(spc, pwm, state->duty_cycle,
+				      state->period);
+		if (ret)
+			return ret;
 
 		sprd_pwm_write(spc, pwm->hwpwm, SPRD_PWM_ENABLE, 1);
 	} else if (cstate->enabled) {
-- 
2.30.2

[PATCH 5.4 018/108] cxgb4: fix IRQ free race during driver unload

[Greg Kroah-Hartman]

From: Shahjada Abul Husain <shahjada@chelsio.com>

[ Upstream commit 015fe6fd29c4b9ac0f61b8c4455ef88e6018b9cc ]

IRQs are requested during driver's ndo_open() and then later
freed up in disable_interrupts() during driver unload.
A race exists where driver can set the CXGB4_FULL_INIT_DONE
flag in ndo_open() after the disable_interrupts() in driver
unload path checks it, and hence misses calling free_irq().

Fix by unregistering netdevice first and sync with driver's
ndo_open(). This ensures disable_interrupts() checks the flag
correctly and frees up the IRQs properly.

Fixes: b37987e8db5f ("cxgb4: Disable interrupts and napi before unregistering netdev")
Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com>
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/chelsio/cxgb4/cxgb4_main.c    | 18 ++++++++++--------
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c |  3 +++
 2 files changed, 13 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index deb1c1f30107..21414a34a5b5 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -2245,6 +2245,9 @@ static void detach_ulds(struct adapter *adap)
 {
 	unsigned int i;
 
+	if (!is_uld(adap))
+		return;
+
 	mutex_lock(&uld_mutex);
 	list_del(&adap->list_node);
 
@@ -6152,10 +6155,13 @@ static void remove_one(struct pci_dev *pdev)
 		 */
 		destroy_workqueue(adapter->workq);
 
-		if (is_uld(adapter)) {
-			detach_ulds(adapter);
-			t4_uld_clean_up(adapter);
-		}
+		detach_ulds(adapter);
+
+		for_each_port(adapter, i)
+			if (adapter->port[i]->reg_state == NETREG_REGISTERED)
+				unregister_netdev(adapter->port[i]);
+
+		t4_uld_clean_up(adapter);
 
 		adap_free_hma_mem(adapter);
 
@@ -6163,10 +6169,6 @@ static void remove_one(struct pci_dev *pdev)
 
 		cxgb4_free_mps_ref_entries(adapter);
 
-		for_each_port(adapter, i)
-			if (adapter->port[i]->reg_state == NETREG_REGISTERED)
-				unregister_netdev(adapter->port[i]);
-
 		debugfs_remove_recursive(adapter->debugfs_root);
 
 		if (!is_t4(adapter->params.chip))
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c
index 86b528d8364c..971bdd70b6d6 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c
@@ -638,6 +638,9 @@ void t4_uld_clean_up(struct adapter *adap)
 {
 	unsigned int i;
 
+	if (!is_uld(adap))
+		return;
+
 	mutex_lock(&uld_mutex);
 	for (i = 0; i < CXGB4_ULD_MAX; i++) {
 		if (!adap->uld[i].handle)
-- 
2.30.2

[PATCH 5.4 019/108] nvme-pci: do not call nvme_dev_remove_admin from nvme_remove

[Greg Kroah-Hartman]

From: Casey Chen <cachen@purestorage.com>

[ Upstream commit 251ef6f71be2adfd09546a26643426fe62585173 ]

nvme_dev_remove_admin could free dev->admin_q and the admin_tagset
while they are being accessed by nvme_dev_disable(), which can be called
by nvme_reset_work via nvme_remove_dead_ctrl.

Commit cb4bfda62afa ("nvme-pci: fix hot removal during error handling")
intended to avoid requests being stuck on a removed controller by killing
the admin queue. But the later fix c8e9e9b7646e ("nvme-pci: unquiesce
admin queue on shutdown"), together with nvme_dev_disable(dev, true)
right before nvme_dev_remove_admin() could help dispatch requests and
fail them early, so we don't need nvme_dev_remove_admin() any more.

Fixes: cb4bfda62afa ("nvme-pci: fix hot removal during error handling")
Signed-off-by: Casey Chen <cachen@purestorage.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/pci.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 2cb2ead7615b..f9dba1a3e655 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -2954,7 +2954,6 @@ static void nvme_remove(struct pci_dev *pdev)
 	if (!pci_device_is_present(pdev)) {
 		nvme_change_ctrl_state(&dev->ctrl, NVME_CTRL_DEAD);
 		nvme_dev_disable(dev, true);
-		nvme_dev_remove_admin(dev);
 	}
 
 	flush_work(&dev->ctrl.reset_work);
-- 
2.30.2

[PATCH 5.4 020/108] perf map: Fix dso->nsinfo refcounting

[Greg Kroah-Hartman]

From: Riccardo Mancini <rickyman7@gmail.com>

[ Upstream commit 2d6b74baa7147251c30a46c4996e8cc224aa2dc5 ]

ASan reports a memory leak of nsinfo during the execution of

  # perf test "31: Lookup mmap thread"

The leak is caused by a refcounted variable being replaced without
dropping the refcount.

This patch makes sure that the refcnt of nsinfo is decreased whenever a
refcounted variable is replaced with a new value.

Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Fixes: bf2e710b3cb8445c ("perf maps: Lookup maps in both intitial mountns and inner mountns.")
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/55223bc8821b34ccb01f92ef1401c02b6a32e61f.1626343282.git.rickyman7@gmail.com
[ Split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/map.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/tools/perf/util/map.c b/tools/perf/util/map.c
index 571e99c908a0..1ae5c51a7035 100644
--- a/tools/perf/util/map.c
+++ b/tools/perf/util/map.c
@@ -214,6 +214,8 @@ struct map *map__new(struct machine *machine, u64 start, u64 len,
 			if (!(prot & PROT_EXEC))
 				dso__set_loaded(dso);
 		}
+
+		nsinfo__put(dso->nsinfo);
 		dso->nsinfo = nsi;
 		dso__put(dso);
 	}
-- 
2.30.2

[PATCH 5.4 021/108] perf probe: Fix dso->nsinfo refcounting

[Greg Kroah-Hartman]

From: Riccardo Mancini <rickyman7@gmail.com>

[ Upstream commit dedeb4be203b382ba7245d13079bc3b0f6d40c65 ]

ASan reports a memory leak of nsinfo during the execution of:

 # perf test "31: Lookup mmap thread".

The leak is caused by a refcounted variable being replaced without
dropping the refcount.

This patch makes sure that the refcnt of nsinfo is decreased whenever
a refcounted variable is replaced with a new value.

Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Fixes: 544abd44c7064c8a ("perf probe: Allow placing uprobes in alternate namespaces.")
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/55223bc8821b34ccb01f92ef1401c02b6a32e61f.1626343282.git.rickyman7@gmail.com
[ Split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/probe-event.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c
index a5cb1a3a1064..6357ac508ad1 100644
--- a/tools/perf/util/probe-event.c
+++ b/tools/perf/util/probe-event.c
@@ -175,8 +175,10 @@ struct map *get_target_map(const char *target, struct nsinfo *nsi, bool user)
 		struct map *map;
 
 		map = dso__new_map(target);
-		if (map && map->dso)
+		if (map && map->dso) {
+			nsinfo__put(map->dso->nsinfo);
 			map->dso->nsinfo = nsinfo__get(nsi);
+		}
 		return map;
 	} else {
 		return kernel_get_module_map(target);
-- 
2.30.2

[PATCH 5.4 022/108] perf env: Fix sibling_dies memory leak

[Greg Kroah-Hartman]

From: Riccardo Mancini <rickyman7@gmail.com>

[ Upstream commit 42db3d9ded555f7148b5695109a7dc8d66f0dde4 ]

ASan reports a memory leak in perf_env while running:

  # perf test "41: Session topology"

Caused by sibling_dies not being freed.

This patch adds the required free.

Fixes: acae8b36cded0ee6 ("perf header: Add die information in CPU topology")
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/2140d0b57656e4eb9021ca9772250c24c032924b.1626343282.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/env.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/tools/perf/util/env.c b/tools/perf/util/env.c
index 018ecf7b6da9..0fafcf264d23 100644
--- a/tools/perf/util/env.c
+++ b/tools/perf/util/env.c
@@ -175,6 +175,7 @@ void perf_env__exit(struct perf_env *env)
 	zfree(&env->cpuid);
 	zfree(&env->cmdline);
 	zfree(&env->cmdline_argv);
+	zfree(&env->sibling_dies);
 	zfree(&env->sibling_cores);
 	zfree(&env->sibling_threads);
 	zfree(&env->pmu_mappings);
-- 
2.30.2

[PATCH 5.4 023/108] perf test session_topology: Delete session->evlist

[Greg Kroah-Hartman]

From: Riccardo Mancini <rickyman7@gmail.com>

[ Upstream commit 233f2dc1c284337286f9a64c0152236779a42f6c ]

ASan reports a memory leak related to session->evlist while running:

  # perf test "41: Session topology".

When perf_data is in write mode, session->evlist is owned by the caller,
which should also take care of deleting it.

This patch adds the missing evlist__delete().

Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Fixes: c84974ed9fb67293 ("perf test: Add entry to test cpu topology")
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/822f741f06eb25250fb60686cf30a35f447e9e91.1626343282.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/tests/topology.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/tools/perf/tests/topology.c b/tools/perf/tests/topology.c
index 22daf2bdf5fa..f4a2c0df0954 100644
--- a/tools/perf/tests/topology.c
+++ b/tools/perf/tests/topology.c
@@ -52,6 +52,7 @@ static int session_write_header(char *path)
 	TEST_ASSERT_VAL("failed to write header",
 			!perf_session__write_header(session, session->evlist, data.file.fd, true));
 
+	evlist__delete(session->evlist);
 	perf_session__delete(session);
 
 	return 0;
-- 
2.30.2

[PATCH 5.4 024/108] perf test event_update: Fix memory leak of evlist

[Greg Kroah-Hartman]

From: Riccardo Mancini <rickyman7@gmail.com>

[ Upstream commit fc56f54f6fcd5337634f4545af6459613129b432 ]

ASan reports a memory leak when running:

  # perf test "49: Synthesize attr update"

Caused by evlist not being deleted.

This patch adds the missing evlist__delete and removes the
perf_cpu_map__put since it's already being deleted by evlist__delete.

Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Fixes: a6e5281780d1da65 ("perf tools: Add event_update event unit type")
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/f7994ad63d248f7645f901132d208fadf9f2b7e4.1626343282.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/tests/event_update.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/tests/event_update.c b/tools/perf/tests/event_update.c
index c727379cf20e..195b29797acc 100644
--- a/tools/perf/tests/event_update.c
+++ b/tools/perf/tests/event_update.c
@@ -119,6 +119,6 @@ int test__event_update(struct test *test __maybe_unused, int subtest __maybe_unu
 	TEST_ASSERT_VAL("failed to synthesize attr update cpus",
 			!perf_event__synthesize_event_update_cpus(&tmp.tool, evsel, process_event_cpus));
 
-	perf_cpu_map__put(evsel->core.own_cpus);
+	evlist__delete(evlist);
 	return 0;
 }
-- 
2.30.2

[PATCH 5.4 025/108] perf dso: Fix memory leak in dso__new_map()

[Greg Kroah-Hartman]

From: Riccardo Mancini <rickyman7@gmail.com>

[ Upstream commit 581e295a0f6b5c2931d280259fbbfff56959faa9 ]

ASan reports a memory leak when running:

  # perf test "65: maps__merge_in".

The causes of the leaks are two, this patch addresses only the first
one, which is related to dso__new_map().

The bug is that dso__new_map() creates a new dso but never decreases the
refcount it gets from creating it.

This patch adds the missing dso__put().

Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Fixes: d3a7c489c7fd2463 ("perf tools: Reference count struct dso")
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/60bfe0cd06e89e2ca33646eb8468d7f5de2ee597.1626343282.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/dso.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/tools/perf/util/dso.c b/tools/perf/util/dso.c
index ab2e130dc07a..7f07a5dc555f 100644
--- a/tools/perf/util/dso.c
+++ b/tools/perf/util/dso.c
@@ -1086,8 +1086,10 @@ struct map *dso__new_map(const char *name)
 	struct map *map = NULL;
 	struct dso *dso = dso__new(name);
 
-	if (dso)
+	if (dso) {
 		map = map__new2(0, dso);
+		dso__put(dso);
+	}
 
 	return map;
 }
-- 
2.30.2

[PATCH 5.4 026/108] perf script: Fix memory threads and cpus leaks on exit

[Greg Kroah-Hartman]

From: Riccardo Mancini <rickyman7@gmail.com>

[ Upstream commit faf3ac305d61341c74e5cdd9e41daecce7f67bfe ]

ASan reports several memory leaks while running:

  # perf test "82: Use vfs_getname probe to get syscall args filenames"

Two of these are caused by some refcounts not being decreased on
perf-script exit, namely script.threads and script.cpus.

This patch adds the missing __put calls in a new perf_script__exit
function, which is called at the end of cmd_script.

This patch concludes the fixes of all remaining memory leaks in perf
test "82: Use vfs_getname probe to get syscall args filenames".

Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Fixes: cfc8874a48599249 ("perf script: Process cpu/threads maps")
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/5ee73b19791c6fa9d24c4d57f4ac1a23609400d7.1626343282.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/builtin-script.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/tools/perf/builtin-script.c b/tools/perf/builtin-script.c
index da016f398aa8..f3ff825d9dd3 100644
--- a/tools/perf/builtin-script.c
+++ b/tools/perf/builtin-script.c
@@ -2474,6 +2474,12 @@ static void perf_script__exit_per_event_dump_stats(struct perf_script *script)
 	}
 }
 
+static void perf_script__exit(struct perf_script *script)
+{
+	perf_thread_map__put(script->threads);
+	perf_cpu_map__put(script->cpus);
+}
+
 static int __cmd_script(struct perf_script *script)
 {
 	int ret;
@@ -3893,6 +3899,7 @@ out_delete:
 
 	perf_evlist__free_stats(session->evlist);
 	perf_session__delete(session);
+	perf_script__exit(&script);
 
 	if (script_started)
 		cleanup_scripting();
-- 
2.30.2

[PATCH 5.4 027/108] perf lzma: Close lzma stream on exit

[Greg Kroah-Hartman]

From: Riccardo Mancini <rickyman7@gmail.com>

[ Upstream commit f8cbb0f926ae1e1fb5f9e51614e5437560ed4039 ]

ASan reports memory leaks when running:

  # perf test "88: Check open filename arg using perf trace + vfs_getname"

One of these is caused by the lzma stream never being closed inside
lzma_decompress_to_file().

This patch adds the missing lzma_end().

Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Fixes: 80a32e5b498a7547 ("perf tools: Add lzma decompression support for kernel module")
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/aaf50bdce7afe996cfc06e1bbb36e4a2a9b9db93.1626343282.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/lzma.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/tools/perf/util/lzma.c b/tools/perf/util/lzma.c
index 39062df02629..51424cdc3b68 100644
--- a/tools/perf/util/lzma.c
+++ b/tools/perf/util/lzma.c
@@ -69,7 +69,7 @@ int lzma_decompress_to_file(const char *input, int output_fd)
 
 			if (ferror(infile)) {
 				pr_err("lzma: read error: %s\n", strerror(errno));
-				goto err_fclose;
+				goto err_lzma_end;
 			}
 
 			if (feof(infile))
@@ -83,7 +83,7 @@ int lzma_decompress_to_file(const char *input, int output_fd)
 
 			if (writen(output_fd, buf_out, write_size) != write_size) {
 				pr_err("lzma: write error: %s\n", strerror(errno));
-				goto err_fclose;
+				goto err_lzma_end;
 			}
 
 			strm.next_out  = buf_out;
@@ -95,11 +95,13 @@ int lzma_decompress_to_file(const char *input, int output_fd)
 				break;
 
 			pr_err("lzma: failed %s\n", lzma_strerror(ret));
-			goto err_fclose;
+			goto err_lzma_end;
 		}
 	}
 
 	err = 0;
+err_lzma_end:
+	lzma_end(&strm);
 err_fclose:
 	fclose(infile);
 	return err;
-- 
2.30.2

[PATCH 5.4 028/108] perf probe-file: Delete namelist in del_events() on the error path

[Greg Kroah-Hartman]

From: Riccardo Mancini <rickyman7@gmail.com>

[ Upstream commit e0fa7ab42232e742dcb3de9f3c1f6127b5adc019 ]

ASan reports some memory leaks when running:

  # perf test "42: BPF filter"

This second leak is caused by a strlist not being dellocated on error
inside probe_file__del_events.

This patch adds a goto label before the deallocation and makes the error
path jump to it.

Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Fixes: e7895e422e4da63d ("perf probe: Split del_perf_probe_events()")
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/174963c587ae77fa108af794669998e4ae558338.1626343282.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/probe-file.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/perf/util/probe-file.c b/tools/perf/util/probe-file.c
index f778f8e7e65a..5558e2adebe4 100644
--- a/tools/perf/util/probe-file.c
+++ b/tools/perf/util/probe-file.c
@@ -337,11 +337,11 @@ int probe_file__del_events(int fd, struct strfilter *filter)
 
 	ret = probe_file__get_events(fd, filter, namelist);
 	if (ret < 0)
-		return ret;
+		goto out;
 
 	ret = probe_file__del_strlist(fd, namelist);
+out:
 	strlist__delete(namelist);
-
 	return ret;
 }
 
-- 
2.30.2

[PATCH 5.4 029/108] perf data: Close all files in close_dir()

[Greg Kroah-Hartman]

From: Riccardo Mancini <rickyman7@gmail.com>

[ Upstream commit d4b3eedce151e63932ce4a00f1d0baa340a8b907 ]

When using 'perf report' in directory mode, the first file is not closed
on exit, causing a memory leak.

The problem is caused by the iterating variable never reaching 0.

Fixes: 145520631130bd64 ("perf data: Add perf_data__(create_dir|close_dir) functions")
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Link: http://lore.kernel.org/lkml/20210716141122.858082-1-rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/data.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/util/data.c b/tools/perf/util/data.c
index 7534455ffc6a..a3f912615690 100644
--- a/tools/perf/util/data.c
+++ b/tools/perf/util/data.c
@@ -20,7 +20,7 @@
 
 static void close_dir(struct perf_data_file *files, int nr)
 {
-	while (--nr >= 1) {
+	while (--nr >= 0) {
 		close(files[nr].fd);
 		zfree(&files[nr].path);
 	}
-- 
2.30.2

[PATCH 5.4 030/108] spi: imx: add a check for speed_hz before calculating the clock

[Greg Kroah-Hartman]

From: Clark Wang <xiaoning.wang@nxp.com>

[ Upstream commit 4df2f5e1372e9eec8f9e1b4a3025b9be23487d36 ]

When some drivers use spi to send data, spi_transfer->speed_hz is
not assigned. If spidev->max_speed_hz is not assigned as well, it
will cause an error in configuring the clock.
Add a check for these two values before configuring the clock. An
error will be returned when they are not assigned.

Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Link: https://lore.kernel.org/r/20210408103347.244313-2-xiaoning.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-imx.c | 37 +++++++++++++++++++++----------------
 1 file changed, 21 insertions(+), 16 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 09c9a1edb2c6..e237481dbbbb 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -64,8 +64,7 @@ struct spi_imx_data;
 struct spi_imx_devtype_data {
 	void (*intctrl)(struct spi_imx_data *, int);
 	int (*prepare_message)(struct spi_imx_data *, struct spi_message *);
-	int (*prepare_transfer)(struct spi_imx_data *, struct spi_device *,
-				struct spi_transfer *);
+	int (*prepare_transfer)(struct spi_imx_data *, struct spi_device *);
 	void (*trigger)(struct spi_imx_data *);
 	int (*rx_available)(struct spi_imx_data *);
 	void (*reset)(struct spi_imx_data *);
@@ -564,11 +563,10 @@ static int mx51_ecspi_prepare_message(struct spi_imx_data *spi_imx,
 }
 
 static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
-				       struct spi_device *spi,
-				       struct spi_transfer *t)
+				       struct spi_device *spi)
 {
 	u32 ctrl = readl(spi_imx->base + MX51_ECSPI_CTRL);
-	u32 clk = t->speed_hz, delay;
+	u32 clk, delay;
 
 	/* Clear BL field and set the right value */
 	ctrl &= ~MX51_ECSPI_CTRL_BL_MASK;
@@ -582,7 +580,7 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
 	/* set clock speed */
 	ctrl &= ~(0xf << MX51_ECSPI_CTRL_POSTDIV_OFFSET |
 		  0xf << MX51_ECSPI_CTRL_PREDIV_OFFSET);
-	ctrl |= mx51_ecspi_clkdiv(spi_imx, t->speed_hz, &clk);
+	ctrl |= mx51_ecspi_clkdiv(spi_imx, spi_imx->spi_bus_clk, &clk);
 	spi_imx->spi_bus_clk = clk;
 
 	if (spi_imx->usedma)
@@ -694,13 +692,12 @@ static int mx31_prepare_message(struct spi_imx_data *spi_imx,
 }
 
 static int mx31_prepare_transfer(struct spi_imx_data *spi_imx,
-				 struct spi_device *spi,
-				 struct spi_transfer *t)
+				 struct spi_device *spi)
 {
 	unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER;
 	unsigned int clk;
 
-	reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, t->speed_hz, &clk) <<
+	reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, spi_imx->spi_bus_clk, &clk) <<
 		MX31_CSPICTRL_DR_SHIFT;
 	spi_imx->spi_bus_clk = clk;
 
@@ -799,14 +796,13 @@ static int mx21_prepare_message(struct spi_imx_data *spi_imx,
 }
 
 static int mx21_prepare_transfer(struct spi_imx_data *spi_imx,
-				 struct spi_device *spi,
-				 struct spi_transfer *t)
+				 struct spi_device *spi)
 {
 	unsigned int reg = MX21_CSPICTRL_ENABLE | MX21_CSPICTRL_MASTER;
 	unsigned int max = is_imx27_cspi(spi_imx) ? 16 : 18;
 	unsigned int clk;
 
-	reg |= spi_imx_clkdiv_1(spi_imx->spi_clk, t->speed_hz, max, &clk)
+	reg |= spi_imx_clkdiv_1(spi_imx->spi_clk, spi_imx->spi_bus_clk, max, &clk)
 		<< MX21_CSPICTRL_DR_SHIFT;
 	spi_imx->spi_bus_clk = clk;
 
@@ -875,13 +871,12 @@ static int mx1_prepare_message(struct spi_imx_data *spi_imx,
 }
 
 static int mx1_prepare_transfer(struct spi_imx_data *spi_imx,
-				struct spi_device *spi,
-				struct spi_transfer *t)
+				struct spi_device *spi)
 {
 	unsigned int reg = MX1_CSPICTRL_ENABLE | MX1_CSPICTRL_MASTER;
 	unsigned int clk;
 
-	reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, t->speed_hz, &clk) <<
+	reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, spi_imx->spi_bus_clk, &clk) <<
 		MX1_CSPICTRL_DR_SHIFT;
 	spi_imx->spi_bus_clk = clk;
 
@@ -1199,6 +1194,16 @@ static int spi_imx_setupxfer(struct spi_device *spi,
 	if (!t)
 		return 0;
 
+	if (!t->speed_hz) {
+		if (!spi->max_speed_hz) {
+			dev_err(&spi->dev, "no speed_hz provided!\n");
+			return -EINVAL;
+		}
+		dev_dbg(&spi->dev, "using spi->max_speed_hz!\n");
+		spi_imx->spi_bus_clk = spi->max_speed_hz;
+	} else
+		spi_imx->spi_bus_clk = t->speed_hz;
+
 	spi_imx->bits_per_word = t->bits_per_word;
 
 	/*
@@ -1240,7 +1245,7 @@ static int spi_imx_setupxfer(struct spi_device *spi,
 		spi_imx->slave_burst = t->len;
 	}
 
-	spi_imx->devtype_data->prepare_transfer(spi_imx, spi, t);
+	spi_imx->devtype_data->prepare_transfer(spi_imx, spi);
 
 	return 0;
 }
-- 
2.30.2

[PATCH 5.4 031/108] spi: stm32: Use dma_request_chan() instead dma_request_slave_channel()

[Greg Kroah-Hartman]

From: Peter Ujfalusi <peter.ujfalusi@ti.com>

[ Upstream commit 0a454258febb73e4c60d7f5d9a02d1a8c64fdfb8 ]

dma_request_slave_channel() is a wrapper on top of dma_request_chan()
eating up the error code.

By using dma_request_chan() directly the driver can support deferred
probing against DMA.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20191212135550.4634-10-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-stm32.c | 32 ++++++++++++++++++++++----------
 1 file changed, 22 insertions(+), 10 deletions(-)

diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index 3af6a5a3a4b2..8c308279c535 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -1908,17 +1908,29 @@ static int stm32_spi_probe(struct platform_device *pdev)
 	master->transfer_one = stm32_spi_transfer_one;
 	master->unprepare_message = stm32_spi_unprepare_msg;
 
-	spi->dma_tx = dma_request_slave_channel(spi->dev, "tx");
-	if (!spi->dma_tx)
+	spi->dma_tx = dma_request_chan(spi->dev, "tx");
+	if (IS_ERR(spi->dma_tx)) {
+		ret = PTR_ERR(spi->dma_tx);
+		spi->dma_tx = NULL;
+		if (ret == -EPROBE_DEFER)
+			goto err_clk_disable;
+
 		dev_warn(&pdev->dev, "failed to request tx dma channel\n");
-	else
+	} else {
 		master->dma_tx = spi->dma_tx;
+	}
+
+	spi->dma_rx = dma_request_chan(spi->dev, "rx");
+	if (IS_ERR(spi->dma_rx)) {
+		ret = PTR_ERR(spi->dma_rx);
+		spi->dma_rx = NULL;
+		if (ret == -EPROBE_DEFER)
+			goto err_dma_release;
 
-	spi->dma_rx = dma_request_slave_channel(spi->dev, "rx");
-	if (!spi->dma_rx)
 		dev_warn(&pdev->dev, "failed to request rx dma channel\n");
-	else
+	} else {
 		master->dma_rx = spi->dma_rx;
+	}
 
 	if (spi->dma_tx || spi->dma_rx)
 		master->can_dma = stm32_spi_can_dma;
@@ -1930,13 +1942,13 @@ static int stm32_spi_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(&pdev->dev, "spi master registration failed: %d\n",
 			ret);
-		goto err_dma_release;
+		goto err_pm_disable;
 	}
 
 	if (!master->cs_gpios) {
 		dev_err(&pdev->dev, "no CS gpios available\n");
 		ret = -EINVAL;
-		goto err_dma_release;
+		goto err_pm_disable;
 	}
 
 	for (i = 0; i < master->num_chipselect; i++) {
@@ -1960,13 +1972,13 @@ static int stm32_spi_probe(struct platform_device *pdev)
 
 	return 0;
 
+err_pm_disable:
+	pm_runtime_disable(&pdev->dev);
 err_dma_release:
 	if (spi->dma_tx)
 		dma_release_channel(spi->dma_tx);
 	if (spi->dma_rx)
 		dma_release_channel(spi->dma_rx);
-
-	pm_runtime_disable(&pdev->dev);
 err_clk_disable:
 	clk_disable_unprepare(spi->clk);
 err_master_put:
-- 
2.30.2

[PATCH 5.4 032/108] spi: stm32: fixes pm_runtime calls in probe/remove

[Greg Kroah-Hartman]

From: Alain Volmat <alain.volmat@foss.st.com>

[ Upstream commit 7999d2555c9f879d006ea8469d74db9cdb038af0 ]

Add pm_runtime calls in probe/probe error path and remove
in order to be consistent in all places in ordering and
ensure that pm_runtime is disabled prior to resources used
by the SPI controller.

This patch also fixes the 2 following warnings on driver remove:
WARNING: CPU: 0 PID: 743 at drivers/clk/clk.c:594 clk_core_disable_lock+0x18/0x24
WARNING: CPU: 0 PID: 743 at drivers/clk/clk.c:476 clk_unprepare+0x24/0x2c

Fixes: 038ac869c9d2 ("spi: stm32: add runtime PM support")

Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/1625646426-5826-2-git-send-email-alain.volmat@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-stm32.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index 8c308279c535..e9d48e94f5ed 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -1936,6 +1936,7 @@ static int stm32_spi_probe(struct platform_device *pdev)
 		master->can_dma = stm32_spi_can_dma;
 
 	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_get_noresume(&pdev->dev);
 	pm_runtime_enable(&pdev->dev);
 
 	ret = spi_register_master(master);
@@ -1974,6 +1975,8 @@ static int stm32_spi_probe(struct platform_device *pdev)
 
 err_pm_disable:
 	pm_runtime_disable(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
+	pm_runtime_set_suspended(&pdev->dev);
 err_dma_release:
 	if (spi->dma_tx)
 		dma_release_channel(spi->dma_tx);
@@ -1992,9 +1995,14 @@ static int stm32_spi_remove(struct platform_device *pdev)
 	struct spi_master *master = platform_get_drvdata(pdev);
 	struct stm32_spi *spi = spi_master_get_devdata(master);
 
+	pm_runtime_get_sync(&pdev->dev);
+
 	spi_unregister_master(master);
 	spi->cfg->disable(spi);
 
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
+	pm_runtime_set_suspended(&pdev->dev);
 	if (master->dma_tx)
 		dma_release_channel(master->dma_tx);
 	if (master->dma_rx)
@@ -2002,7 +2010,6 @@ static int stm32_spi_remove(struct platform_device *pdev)
 
 	clk_disable_unprepare(spi->clk);
 
-	pm_runtime_disable(&pdev->dev);
 
 	pinctrl_pm_select_sleep_state(&pdev->dev);
 
-- 
2.30.2

[PATCH 5.4 033/108] regulator: hi6421: Use correct variable type for regmap api val argument

[Greg Kroah-Hartman]

From: Axel Lin <axel.lin@ingics.com>

[ Upstream commit ae60e6a9d24e89a74e2512204ad04de94921bdd2 ]

Use unsigned int instead of u32 for regmap_read/regmap_update_bits val
argument.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210619124133.4096683-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/hi6421-regulator.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/regulator/hi6421-regulator.c b/drivers/regulator/hi6421-regulator.c
index 5ac3d7c29725..f14cbabfa985 100644
--- a/drivers/regulator/hi6421-regulator.c
+++ b/drivers/regulator/hi6421-regulator.c
@@ -386,7 +386,7 @@ static int hi6421_regulator_enable(struct regulator_dev *rdev)
 static unsigned int hi6421_regulator_ldo_get_mode(struct regulator_dev *rdev)
 {
 	struct hi6421_regulator_info *info = rdev_get_drvdata(rdev);
-	u32 reg_val;
+	unsigned int reg_val;
 
 	regmap_read(rdev->regmap, rdev->desc->enable_reg, &reg_val);
 	if (reg_val & info->mode_mask)
@@ -398,7 +398,7 @@ static unsigned int hi6421_regulator_ldo_get_mode(struct regulator_dev *rdev)
 static unsigned int hi6421_regulator_buck_get_mode(struct regulator_dev *rdev)
 {
 	struct hi6421_regulator_info *info = rdev_get_drvdata(rdev);
-	u32 reg_val;
+	unsigned int reg_val;
 
 	regmap_read(rdev->regmap, rdev->desc->enable_reg, &reg_val);
 	if (reg_val & info->mode_mask)
@@ -411,7 +411,7 @@ static int hi6421_regulator_ldo_set_mode(struct regulator_dev *rdev,
 						unsigned int mode)
 {
 	struct hi6421_regulator_info *info = rdev_get_drvdata(rdev);
-	u32 new_mode;
+	unsigned int new_mode;
 
 	switch (mode) {
 	case REGULATOR_MODE_NORMAL:
@@ -435,7 +435,7 @@ static int hi6421_regulator_buck_set_mode(struct regulator_dev *rdev,
 						unsigned int mode)
 {
 	struct hi6421_regulator_info *info = rdev_get_drvdata(rdev);
-	u32 new_mode;
+	unsigned int new_mode;
 
 	switch (mode) {
 	case REGULATOR_MODE_NORMAL:
-- 
2.30.2

[PATCH 5.4 034/108] regulator: hi6421: Fix getting wrong drvdata

[Greg Kroah-Hartman]

From: Axel Lin <axel.lin@ingics.com>

[ Upstream commit 1c73daee4bf30ccdff5e86dc400daa6f74735da5 ]

Since config.dev = pdev->dev.parent in current code, so
dev_get_drvdata(rdev->dev.parent) call in hi6421_regulator_enable
returns the drvdata of the mfd device rather than the regulator. Fix it.

This was broken while converting to use simplified DT parsing because the
config.dev changed from pdev->dev to pdev->dev.parent for parsing the
parent's of_node.

Fixes: 29dc269a85ef ("regulator: hi6421: Convert to use simplified DT parsing")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210630095959.2411543-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/hi6421-regulator.c | 22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)

diff --git a/drivers/regulator/hi6421-regulator.c b/drivers/regulator/hi6421-regulator.c
index f14cbabfa985..efc91b03a9bb 100644
--- a/drivers/regulator/hi6421-regulator.c
+++ b/drivers/regulator/hi6421-regulator.c
@@ -366,9 +366,8 @@ static struct hi6421_regulator_info
 
 static int hi6421_regulator_enable(struct regulator_dev *rdev)
 {
-	struct hi6421_regulator_pdata *pdata;
+	struct hi6421_regulator_pdata *pdata = rdev_get_drvdata(rdev);
 
-	pdata = dev_get_drvdata(rdev->dev.parent);
 	/* hi6421 spec requires regulator enablement must be serialized:
 	 *  - Because when BUCK, LDO switching from off to on, it will have
 	 *    a huge instantaneous current; so you can not turn on two or
@@ -385,9 +384,10 @@ static int hi6421_regulator_enable(struct regulator_dev *rdev)
 
 static unsigned int hi6421_regulator_ldo_get_mode(struct regulator_dev *rdev)
 {
-	struct hi6421_regulator_info *info = rdev_get_drvdata(rdev);
+	struct hi6421_regulator_info *info;
 	unsigned int reg_val;
 
+	info = container_of(rdev->desc, struct hi6421_regulator_info, desc);
 	regmap_read(rdev->regmap, rdev->desc->enable_reg, &reg_val);
 	if (reg_val & info->mode_mask)
 		return REGULATOR_MODE_IDLE;
@@ -397,9 +397,10 @@ static unsigned int hi6421_regulator_ldo_get_mode(struct regulator_dev *rdev)
 
 static unsigned int hi6421_regulator_buck_get_mode(struct regulator_dev *rdev)
 {
-	struct hi6421_regulator_info *info = rdev_get_drvdata(rdev);
+	struct hi6421_regulator_info *info;
 	unsigned int reg_val;
 
+	info = container_of(rdev->desc, struct hi6421_regulator_info, desc);
 	regmap_read(rdev->regmap, rdev->desc->enable_reg, &reg_val);
 	if (reg_val & info->mode_mask)
 		return REGULATOR_MODE_STANDBY;
@@ -410,9 +411,10 @@ static unsigned int hi6421_regulator_buck_get_mode(struct regulator_dev *rdev)
 static int hi6421_regulator_ldo_set_mode(struct regulator_dev *rdev,
 						unsigned int mode)
 {
-	struct hi6421_regulator_info *info = rdev_get_drvdata(rdev);
+	struct hi6421_regulator_info *info;
 	unsigned int new_mode;
 
+	info = container_of(rdev->desc, struct hi6421_regulator_info, desc);
 	switch (mode) {
 	case REGULATOR_MODE_NORMAL:
 		new_mode = 0;
@@ -434,9 +436,10 @@ static int hi6421_regulator_ldo_set_mode(struct regulator_dev *rdev,
 static int hi6421_regulator_buck_set_mode(struct regulator_dev *rdev,
 						unsigned int mode)
 {
-	struct hi6421_regulator_info *info = rdev_get_drvdata(rdev);
+	struct hi6421_regulator_info *info;
 	unsigned int new_mode;
 
+	info = container_of(rdev->desc, struct hi6421_regulator_info, desc);
 	switch (mode) {
 	case REGULATOR_MODE_NORMAL:
 		new_mode = 0;
@@ -459,7 +462,9 @@ static unsigned int
 hi6421_regulator_ldo_get_optimum_mode(struct regulator_dev *rdev,
 			int input_uV, int output_uV, int load_uA)
 {
-	struct hi6421_regulator_info *info = rdev_get_drvdata(rdev);
+	struct hi6421_regulator_info *info;
+
+	info = container_of(rdev->desc, struct hi6421_regulator_info, desc);
 
 	if (load_uA > info->eco_microamp)
 		return REGULATOR_MODE_NORMAL;
@@ -543,14 +548,13 @@ static int hi6421_regulator_probe(struct platform_device *pdev)
 	if (!pdata)
 		return -ENOMEM;
 	mutex_init(&pdata->lock);
-	platform_set_drvdata(pdev, pdata);
 
 	for (i = 0; i < ARRAY_SIZE(hi6421_regulator_info); i++) {
 		/* assign per-regulator data */
 		info = &hi6421_regulator_info[i];
 
 		config.dev = pdev->dev.parent;
-		config.driver_data = info;
+		config.driver_data = pdata;
 		config.regmap = pmic->regmap;
 
 		rdev = devm_regulator_register(&pdev->dev, &info->desc,
-- 
2.30.2

[PATCH 5.4 035/108] spi: mediatek: fix fifo rx mode

[Greg Kroah-Hartman]

From: Peter Hess <peter.hess@ph-home.de>

[ Upstream commit 3a70dd2d050331ee4cf5ad9d5c0a32d83ead9a43 ]

In FIFO mode were two problems:
- RX mode was never handled and
- in this case the tx_buf pointer was NULL and caused an exception

fix this by handling RX mode in mtk_spi_fifo_transfer

Fixes: a568231f4632 ("spi: mediatek: Add spi bus for Mediatek MT8173")
Signed-off-by: Peter Hess <peter.hess@ph-home.de>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20210706121609.680534-1-linux@fw-web.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-mt65xx.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index 8acf24f7c5d4..81eac9fbd08c 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -427,13 +427,23 @@ static int mtk_spi_fifo_transfer(struct spi_master *master,
 	mtk_spi_setup_packet(master);
 
 	cnt = xfer->len / 4;
-	iowrite32_rep(mdata->base + SPI_TX_DATA_REG, xfer->tx_buf, cnt);
+	if (xfer->tx_buf)
+		iowrite32_rep(mdata->base + SPI_TX_DATA_REG, xfer->tx_buf, cnt);
+
+	if (xfer->rx_buf)
+		ioread32_rep(mdata->base + SPI_RX_DATA_REG, xfer->rx_buf, cnt);
 
 	remainder = xfer->len % 4;
 	if (remainder > 0) {
 		reg_val = 0;
-		memcpy(&reg_val, xfer->tx_buf + (cnt * 4), remainder);
-		writel(reg_val, mdata->base + SPI_TX_DATA_REG);
+		if (xfer->tx_buf) {
+			memcpy(&reg_val, xfer->tx_buf + (cnt * 4), remainder);
+			writel(reg_val, mdata->base + SPI_TX_DATA_REG);
+		}
+		if (xfer->rx_buf) {
+			reg_val = readl(mdata->base + SPI_RX_DATA_REG);
+			memcpy(xfer->rx_buf + (cnt * 4), &reg_val, remainder);
+		}
 	}
 
 	mtk_spi_enable_transfer(master);
-- 
2.30.2

[PATCH 5.4 036/108] ASoC: rt5631: Fix regcache sync errors on resume

[Greg Kroah-Hartman]

From: Maxim Schwalm <maxim.schwalm@gmail.com>

[ Upstream commit c71f78a662611fe2c67f3155da19b0eff0f29762 ]

The ALC5631 does not like multi-write accesses, avoid them. This fixes:

rt5631 4-001a: Unable to sync registers 0x3a-0x3c. -121

errors on resume from suspend (and all registers after the registers in
the error not being synced).

Inspired by commit 2d30e9494f1e ("ASoC: rt5651: Fix regcache sync errors
on resume") from Hans de Geode, which fixed the same errors on ALC5651.

Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com>
Link: https://lore.kernel.org/r/20210712005011.28536-1-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/rt5631.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/soc/codecs/rt5631.c b/sound/soc/codecs/rt5631.c
index f70b9f7e68bb..281957a8fa86 100644
--- a/sound/soc/codecs/rt5631.c
+++ b/sound/soc/codecs/rt5631.c
@@ -1691,6 +1691,8 @@ static const struct regmap_config rt5631_regmap_config = {
 	.reg_defaults = rt5631_reg,
 	.num_reg_defaults = ARRAY_SIZE(rt5631_reg),
 	.cache_type = REGCACHE_RBTREE,
+	.use_single_read = true,
+	.use_single_write = true,
 };
 
 static int rt5631_i2c_probe(struct i2c_client *i2c,
-- 
2.30.2

[PATCH 5.4 037/108] liquidio: Fix unintentional sign extension issue on left shift of u16

[Greg Kroah-Hartman]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit e7efc2ce3d0789cd7c21b70ff00cd7838d382639 ]

Shifting the u16 integer oct->pcie_port by CN23XX_PKT_INPUT_CTL_MAC_NUM_POS
(29) bits will be promoted to a 32 bit signed int and then sign-extended
to a u64. In the cases where oct->pcie_port where bit 2 is set (e.g. 3..7)
the shifted value will be sign extended and the top 32 bits of the result
will be set.

Fix this by casting the u16 values to a u64 before the 29 bit left shift.

Addresses-Coverity: ("Unintended sign extension")

Fixes: 3451b97cce2d ("liquidio: CN23XX register setup")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c b/drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c
index 4cddd628d41b..9ed3d1ab2ca5 100644
--- a/drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c
+++ b/drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c
@@ -420,7 +420,7 @@ static int cn23xx_pf_setup_global_input_regs(struct octeon_device *oct)
 	 * bits 32:47 indicate the PVF num.
 	 */
 	for (q_no = 0; q_no < ern; q_no++) {
-		reg_val = oct->pcie_port << CN23XX_PKT_INPUT_CTL_MAC_NUM_POS;
+		reg_val = (u64)oct->pcie_port << CN23XX_PKT_INPUT_CTL_MAC_NUM_POS;
 
 		/* for VF assigned queues. */
 		if (q_no < oct->sriov_info.pf_srn) {
-- 
2.30.2

[PATCH 5.4 038/108] s390/bpf: Perform r1 range checking before accessing jit->seen_reg[r1]

[Greg Kroah-Hartman]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit 91091656252f5d6d8c476e0c92776ce9fae7b445 ]

Currently array jit->seen_reg[r1] is being accessed before the range
checking of index r1. The range changing on r1 should be performed
first since it will avoid any potential out-of-range accesses on the
array seen_reg[] and also it is more optimal to perform checks on r1
before fetching data from the array. Fix this by swapping the order
of the checks before the array access.

Fixes: 054623105728 ("s390/bpf: Add s390x eBPF JIT compiler backend")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20210715125712.24690-1-colin.king@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/net/bpf_jit_comp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c
index c8c16b5eed6b..e160f4650f8e 100644
--- a/arch/s390/net/bpf_jit_comp.c
+++ b/arch/s390/net/bpf_jit_comp.c
@@ -114,7 +114,7 @@ static inline void reg_set_seen(struct bpf_jit *jit, u32 b1)
 {
 	u32 r1 = reg2hex[b1];
 
-	if (!jit->seen_reg[r1] && r1 >= 6 && r1 <= 15)
+	if (r1 >= 6 && r1 <= 15 && !jit->seen_reg[r1])
 		jit->seen_reg[r1] = 1;
 }
 
-- 
2.30.2

[PATCH 5.4 039/108] bpf, sockmap, tcp: sk_prot needs inuse_idx set for proc stats

[Greg Kroah-Hartman]

From: John Fastabend <john.fastabend@gmail.com>

[ Upstream commit 228a4a7ba8e99bb9ef980b62f71e3be33f4aae69 ]

The proc socket stats use sk_prot->inuse_idx value to record inuse sock
stats. We currently do not set this correctly from sockmap side. The
result is reading sock stats '/proc/net/sockstat' gives incorrect values.
The socket counter is incremented correctly, but because we don't set the
counter correctly when we replace sk_prot we may omit the decrement.

To get the correct inuse_idx value move the core_initcall that initializes
the TCP proto handlers to late_initcall. This way it is initialized after
TCP has the chance to assign the inuse_idx value from the register protocol
handler.

Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface")
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/bpf/20210712195546.423990-3-john.fastabend@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/tcp_bpf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv4/tcp_bpf.c b/net/ipv4/tcp_bpf.c
index 819255ee4e42..6a0c4326d9cf 100644
--- a/net/ipv4/tcp_bpf.c
+++ b/net/ipv4/tcp_bpf.c
@@ -636,7 +636,7 @@ static int __init tcp_bpf_v4_build_proto(void)
 	tcp_bpf_rebuild_protos(tcp_bpf_prots[TCP_BPF_IPV4], &tcp_prot);
 	return 0;
 }
-core_initcall(tcp_bpf_v4_build_proto);
+late_initcall(tcp_bpf_v4_build_proto);
 
 static void tcp_bpf_update_sk_prot(struct sock *sk, struct sk_psock *psock)
 {
-- 
2.30.2

[PATCH 5.4 040/108] bpftool: Check malloc return value in mount_bpffs_for_pin

[Greg Kroah-Hartman]

From: Tobias Klauser <tklauser@distanz.ch>

[ Upstream commit d444b06e40855219ef38b5e9286db16d435f06dc ]

Fix and add a missing NULL check for the prior malloc() call.

Fixes: 49a086c201a9 ("bpftool: implement prog load command")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Roman Gushchin <guro@fb.com>
Link: https://lore.kernel.org/bpf/20210715110609.29364-1-tklauser@distanz.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/bpf/bpftool/common.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/tools/bpf/bpftool/common.c b/tools/bpf/bpftool/common.c
index 88264abaa738..a209f53901b8 100644
--- a/tools/bpf/bpftool/common.c
+++ b/tools/bpf/bpftool/common.c
@@ -171,6 +171,11 @@ int mount_bpffs_for_pin(const char *name)
 	int err = 0;
 
 	file = malloc(strlen(name) + 1);
+	if (!file) {
+		p_err("mem alloc failed");
+		return -1;
+	}
+
 	strcpy(file, name);
 	dir = dirname(file);
 
-- 
2.30.2

[PATCH 5.4 041/108] net: fix uninit-value in caif_seqpkt_sendmsg

[Greg Kroah-Hartman]

From: Ziyang Xuan <william.xuanziyang@huawei.com>

[ Upstream commit 991e634360f2622a683b48dfe44fe6d9cb765a09 ]

When nr_segs equal to zero in iovec_from_user, the object
msg->msg_iter.iov is uninit stack memory in caif_seqpkt_sendmsg
which is defined in ___sys_sendmsg. So we cann't just judge
msg->msg_iter.iov->base directlly. We can use nr_segs to judge
msg in caif_seqpkt_sendmsg whether has data buffers.

=====================================================
BUG: KMSAN: uninit-value in caif_seqpkt_sendmsg+0x693/0xf60 net/caif/caif_socket.c:542
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c9/0x220 lib/dump_stack.c:118
 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118
 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
 caif_seqpkt_sendmsg+0x693/0xf60 net/caif/caif_socket.c:542
 sock_sendmsg_nosec net/socket.c:652 [inline]
 sock_sendmsg net/socket.c:672 [inline]
 ____sys_sendmsg+0x12b6/0x1350 net/socket.c:2343
 ___sys_sendmsg net/socket.c:2397 [inline]
 __sys_sendmmsg+0x808/0xc90 net/socket.c:2480
 __compat_sys_sendmmsg net/compat.c:656 [inline]

Reported-by: syzbot+09a5d591c1f98cf5efcb@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=1ace85e8fc9b0d5a45c08c2656c3e91762daa9b8
Fixes: bece7b2398d0 ("caif: Rewritten socket implementation")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/caif/caif_socket.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/caif/caif_socket.c b/net/caif/caif_socket.c
index ef14da50a981..8fa98c62c4fc 100644
--- a/net/caif/caif_socket.c
+++ b/net/caif/caif_socket.c
@@ -539,7 +539,8 @@ static int caif_seqpkt_sendmsg(struct socket *sock, struct msghdr *msg,
 		goto err;
 
 	ret = -EINVAL;
-	if (unlikely(msg->msg_iter.iov->iov_base == NULL))
+	if (unlikely(msg->msg_iter.nr_segs == 0) ||
+	    unlikely(msg->msg_iter.iov->iov_base == NULL))
 		goto err;
 	noblock = msg->msg_flags & MSG_DONTWAIT;
 
-- 
2.30.2

[PATCH 5.4 042/108] efi/tpm: Differentiate missing and invalid final event log table.

[Greg Kroah-Hartman]

From: Michal Suchanek <msuchanek@suse.de>

[ Upstream commit 674a9f1f6815849bfb5bf385e7da8fc198aaaba9 ]

Missing TPM final event log table is not a firmware bug.

Clearly if providing event log in the old format makes the final event
log invalid it should not be provided at least in that case.

Fixes: b4f1874c6216 ("tpm: check event log version before reading final events")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/efi/tpm.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/firmware/efi/tpm.c b/drivers/firmware/efi/tpm.c
index c1955d320fec..8f665678e9e3 100644
--- a/drivers/firmware/efi/tpm.c
+++ b/drivers/firmware/efi/tpm.c
@@ -62,9 +62,11 @@ int __init efi_tpm_eventlog_init(void)
 	tbl_size = sizeof(*log_tbl) + log_tbl->size;
 	memblock_reserve(efi.tpm_log, tbl_size);
 
-	if (efi.tpm_final_log == EFI_INVALID_TABLE_ADDR ||
-	    log_tbl->version != EFI_TCG2_EVENT_LOG_FORMAT_TCG_2) {
-		pr_warn(FW_BUG "TPM Final Events table missing or invalid\n");
+	if (efi.tpm_final_log == EFI_INVALID_TABLE_ADDR) {
+		pr_info("TPM Final Events table not present\n");
+		goto out;
+	} else if (log_tbl->version != EFI_TCG2_EVENT_LOG_FORMAT_TCG_2) {
+		pr_warn(FW_BUG "TPM Final Events table invalid\n");
 		goto out;
 	}
 
-- 
2.30.2

[PATCH 5.4 043/108] net: decnet: Fix sleeping inside in af_decnet

[Greg Kroah-Hartman]

From: Yajun Deng <yajun.deng@linux.dev>

[ Upstream commit 5f119ba1d5771bbf46d57cff7417dcd84d3084ba ]

The release_sock() is blocking function, it would change the state
after sleeping. use wait_woken() instead.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/decnet/af_decnet.c | 27 ++++++++++++---------------
 1 file changed, 12 insertions(+), 15 deletions(-)

diff --git a/net/decnet/af_decnet.c b/net/decnet/af_decnet.c
index 3349ea81f901..b9b847dc097c 100644
--- a/net/decnet/af_decnet.c
+++ b/net/decnet/af_decnet.c
@@ -815,7 +815,7 @@ static int dn_auto_bind(struct socket *sock)
 static int dn_confirm_accept(struct sock *sk, long *timeo, gfp_t allocation)
 {
 	struct dn_scp *scp = DN_SK(sk);
-	DEFINE_WAIT(wait);
+	DEFINE_WAIT_FUNC(wait, woken_wake_function);
 	int err;
 
 	if (scp->state != DN_CR)
@@ -825,11 +825,11 @@ static int dn_confirm_accept(struct sock *sk, long *timeo, gfp_t allocation)
 	scp->segsize_loc = dst_metric_advmss(__sk_dst_get(sk));
 	dn_send_conn_conf(sk, allocation);
 
-	prepare_to_wait(sk_sleep(sk), &wait, TASK_INTERRUPTIBLE);
+	add_wait_queue(sk_sleep(sk), &wait);
 	for(;;) {
 		release_sock(sk);
 		if (scp->state == DN_CC)
-			*timeo = schedule_timeout(*timeo);
+			*timeo = wait_woken(&wait, TASK_INTERRUPTIBLE, *timeo);
 		lock_sock(sk);
 		err = 0;
 		if (scp->state == DN_RUN)
@@ -843,9 +843,8 @@ static int dn_confirm_accept(struct sock *sk, long *timeo, gfp_t allocation)
 		err = -EAGAIN;
 		if (!*timeo)
 			break;
-		prepare_to_wait(sk_sleep(sk), &wait, TASK_INTERRUPTIBLE);
 	}
-	finish_wait(sk_sleep(sk), &wait);
+	remove_wait_queue(sk_sleep(sk), &wait);
 	if (err == 0) {
 		sk->sk_socket->state = SS_CONNECTED;
 	} else if (scp->state != DN_CC) {
@@ -857,7 +856,7 @@ static int dn_confirm_accept(struct sock *sk, long *timeo, gfp_t allocation)
 static int dn_wait_run(struct sock *sk, long *timeo)
 {
 	struct dn_scp *scp = DN_SK(sk);
-	DEFINE_WAIT(wait);
+	DEFINE_WAIT_FUNC(wait, woken_wake_function);
 	int err = 0;
 
 	if (scp->state == DN_RUN)
@@ -866,11 +865,11 @@ static int dn_wait_run(struct sock *sk, long *timeo)
 	if (!*timeo)
 		return -EALREADY;
 
-	prepare_to_wait(sk_sleep(sk), &wait, TASK_INTERRUPTIBLE);
+	add_wait_queue(sk_sleep(sk), &wait);
 	for(;;) {
 		release_sock(sk);
 		if (scp->state == DN_CI || scp->state == DN_CC)
-			*timeo = schedule_timeout(*timeo);
+			*timeo = wait_woken(&wait, TASK_INTERRUPTIBLE, *timeo);
 		lock_sock(sk);
 		err = 0;
 		if (scp->state == DN_RUN)
@@ -884,9 +883,8 @@ static int dn_wait_run(struct sock *sk, long *timeo)
 		err = -ETIMEDOUT;
 		if (!*timeo)
 			break;
-		prepare_to_wait(sk_sleep(sk), &wait, TASK_INTERRUPTIBLE);
 	}
-	finish_wait(sk_sleep(sk), &wait);
+	remove_wait_queue(sk_sleep(sk), &wait);
 out:
 	if (err == 0) {
 		sk->sk_socket->state = SS_CONNECTED;
@@ -1031,16 +1029,16 @@ static void dn_user_copy(struct sk_buff *skb, struct optdata_dn *opt)
 
 static struct sk_buff *dn_wait_for_connect(struct sock *sk, long *timeo)
 {
-	DEFINE_WAIT(wait);
+	DEFINE_WAIT_FUNC(wait, woken_wake_function);
 	struct sk_buff *skb = NULL;
 	int err = 0;
 
-	prepare_to_wait(sk_sleep(sk), &wait, TASK_INTERRUPTIBLE);
+	add_wait_queue(sk_sleep(sk), &wait);
 	for(;;) {
 		release_sock(sk);
 		skb = skb_dequeue(&sk->sk_receive_queue);
 		if (skb == NULL) {
-			*timeo = schedule_timeout(*timeo);
+			*timeo = wait_woken(&wait, TASK_INTERRUPTIBLE, *timeo);
 			skb = skb_dequeue(&sk->sk_receive_queue);
 		}
 		lock_sock(sk);
@@ -1055,9 +1053,8 @@ static struct sk_buff *dn_wait_for_connect(struct sock *sk, long *timeo)
 		err = -EAGAIN;
 		if (!*timeo)
 			break;
-		prepare_to_wait(sk_sleep(sk), &wait, TASK_INTERRUPTIBLE);
 	}
-	finish_wait(sk_sleep(sk), &wait);
+	remove_wait_queue(sk_sleep(sk), &wait);
 
 	return skb == NULL ? ERR_PTR(err) : skb;
 }
-- 
2.30.2

[PATCH 5.4 044/108] KVM: PPC: Book3S: Fix CONFIG_TRANSACTIONAL_MEM=n crash

[Greg Kroah-Hartman]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit bd31ecf44b8e18ccb1e5f6b50f85de6922a60de3 ]

When running CPU_FTR_P9_TM_HV_ASSIST, HFSCR[TM] is set for the guest
even if the host has CONFIG_TRANSACTIONAL_MEM=n, which causes it to be
unprepared to handle guest exits while transactional.

Normal guests don't have a problem because the HTM capability will not
be advertised, but a rogue or buggy one could crash the host.

Fixes: 4bb3c7a0208f ("KVM: PPC: Book3S HV: Work around transactional memory bugs in POWER9")
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210716024310.164448-1-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kvm/book3s_hv.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 9011857c0434..bba358f13471 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -2306,8 +2306,10 @@ static struct kvm_vcpu *kvmppc_core_vcpu_create_hv(struct kvm *kvm,
 		HFSCR_DSCR | HFSCR_VECVSX | HFSCR_FP;
 	if (cpu_has_feature(CPU_FTR_HVMODE)) {
 		vcpu->arch.hfscr &= mfspr(SPRN_HFSCR);
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
 		if (cpu_has_feature(CPU_FTR_P9_TM_HV_ASSIST))
 			vcpu->arch.hfscr |= HFSCR_TM;
+#endif
 	}
 	if (cpu_has_feature(CPU_FTR_TM_COMP))
 		vcpu->arch.hfscr |= HFSCR_TM;
-- 
2.30.2

[PATCH 5.4 045/108] KVM: PPC: Fix kvm_arch_vcpu_ioctl vcpu_load leak

[Greg Kroah-Hartman]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit bc4188a2f56e821ea057aca6bf444e138d06c252 ]

vcpu_put is not called if the user copy fails. This can result in preempt
notifier corruption and crashes, among other issues.

Fixes: b3cebfe8c1ca ("KVM: PPC: Move vcpu_load/vcpu_put down to each ioctl case in kvm_arch_vcpu_ioctl")
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210716024310.164448-2-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kvm/powerpc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index e03c06471678..8dd4d2b83677 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -2035,9 +2035,9 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 	{
 		struct kvm_enable_cap cap;
 		r = -EFAULT;
-		vcpu_load(vcpu);
 		if (copy_from_user(&cap, argp, sizeof(cap)))
 			goto out;
+		vcpu_load(vcpu);
 		r = kvm_vcpu_ioctl_enable_cap(vcpu, &cap);
 		vcpu_put(vcpu);
 		break;
@@ -2061,9 +2061,9 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 	case KVM_DIRTY_TLB: {
 		struct kvm_dirty_tlb dirty;
 		r = -EFAULT;
-		vcpu_load(vcpu);
 		if (copy_from_user(&dirty, argp, sizeof(dirty)))
 			goto out;
+		vcpu_load(vcpu);
 		r = kvm_vcpu_ioctl_dirty_tlb(vcpu, &dirty);
 		vcpu_put(vcpu);
 		break;
-- 
2.30.2

[PATCH 5.4 046/108] net: sched: fix memory leak in tcindex_partial_destroy_work

[Greg Kroah-Hartman]

From: Pavel Skripkin <paskripkin@gmail.com>

[ Upstream commit f5051bcece50140abd1a11a2d36dc3ec5484fc32 ]

Syzbot reported memory leak in tcindex_set_parms(). The problem was in
non-freed perfect hash in tcindex_partial_destroy_work().

In tcindex_set_parms() new tcindex_data is allocated and some fields from
old one are copied to new one, but not the perfect hash. Since
tcindex_partial_destroy_work() is the destroy function for old
tcindex_data, we need to free perfect hash to avoid memory leak.

Reported-and-tested-by: syzbot+f0bbb2287b8993d4fa74@syzkaller.appspotmail.com
Fixes: 331b72922c5f ("net: sched: RCU cls_tcindex")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sched/cls_tcindex.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/net/sched/cls_tcindex.c b/net/sched/cls_tcindex.c
index 3e81f87d0c89..684187a1fdb9 100644
--- a/net/sched/cls_tcindex.c
+++ b/net/sched/cls_tcindex.c
@@ -278,6 +278,8 @@ static int tcindex_filter_result_init(struct tcindex_filter_result *r,
 			     TCA_TCINDEX_POLICE);
 }
 
+static void tcindex_free_perfect_hash(struct tcindex_data *cp);
+
 static void tcindex_partial_destroy_work(struct work_struct *work)
 {
 	struct tcindex_data *p = container_of(to_rcu_work(work),
@@ -285,7 +287,8 @@ static void tcindex_partial_destroy_work(struct work_struct *work)
 					      rwork);
 
 	rtnl_lock();
-	kfree(p->perfect);
+	if (p->perfect)
+		tcindex_free_perfect_hash(p);
 	kfree(p);
 	rtnl_unlock();
 }
-- 
2.30.2

[PATCH 5.4 047/108] netrom: Decrease sock refcount when sock timers expire

[Greg Kroah-Hartman]

From: Nguyen Dinh Phi <phind.uet@gmail.com>

[ Upstream commit 517a16b1a88bdb6b530f48d5d153478b2552d9a8 ]

Commit 63346650c1a9 ("netrom: switch to sock timer API") switched to use
sock timer API. It replaces mod_timer() by sk_reset_timer(), and
del_timer() by sk_stop_timer().

Function sk_reset_timer() will increase the refcount of sock if it is
called on an inactive timer, hence, in case the timer expires, we need to
decrease the refcount ourselves in the handler, otherwise, the sock
refcount will be unbalanced and the sock will never be freed.

Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com>
Reported-by: syzbot+10f1194569953b72f1ae@syzkaller.appspotmail.com
Fixes: 63346650c1a9 ("netrom: switch to sock timer API")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netrom/nr_timer.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/net/netrom/nr_timer.c b/net/netrom/nr_timer.c
index 9115f8a7dd45..a8da88db7893 100644
--- a/net/netrom/nr_timer.c
+++ b/net/netrom/nr_timer.c
@@ -121,11 +121,9 @@ static void nr_heartbeat_expiry(struct timer_list *t)
 		   is accepted() it isn't 'dead' so doesn't get removed. */
 		if (sock_flag(sk, SOCK_DESTROY) ||
 		    (sk->sk_state == TCP_LISTEN && sock_flag(sk, SOCK_DEAD))) {
-			sock_hold(sk);
 			bh_unlock_sock(sk);
 			nr_destroy_socket(sk);
-			sock_put(sk);
-			return;
+			goto out;
 		}
 		break;
 
@@ -146,6 +144,8 @@ static void nr_heartbeat_expiry(struct timer_list *t)
 
 	nr_start_heartbeat(sk);
 	bh_unlock_sock(sk);
+out:
+	sock_put(sk);
 }
 
 static void nr_t2timer_expiry(struct timer_list *t)
@@ -159,6 +159,7 @@ static void nr_t2timer_expiry(struct timer_list *t)
 		nr_enquiry_response(sk);
 	}
 	bh_unlock_sock(sk);
+	sock_put(sk);
 }
 
 static void nr_t4timer_expiry(struct timer_list *t)
@@ -169,6 +170,7 @@ static void nr_t4timer_expiry(struct timer_list *t)
 	bh_lock_sock(sk);
 	nr_sk(sk)->condition &= ~NR_COND_PEER_RX_BUSY;
 	bh_unlock_sock(sk);
+	sock_put(sk);
 }
 
 static void nr_idletimer_expiry(struct timer_list *t)
@@ -197,6 +199,7 @@ static void nr_idletimer_expiry(struct timer_list *t)
 		sock_set_flag(sk, SOCK_DEAD);
 	}
 	bh_unlock_sock(sk);
+	sock_put(sk);
 }
 
 static void nr_t1timer_expiry(struct timer_list *t)
@@ -209,8 +212,7 @@ static void nr_t1timer_expiry(struct timer_list *t)
 	case NR_STATE_1:
 		if (nr->n2count == nr->n2) {
 			nr_disconnect(sk, ETIMEDOUT);
-			bh_unlock_sock(sk);
-			return;
+			goto out;
 		} else {
 			nr->n2count++;
 			nr_write_internal(sk, NR_CONNREQ);
@@ -220,8 +222,7 @@ static void nr_t1timer_expiry(struct timer_list *t)
 	case NR_STATE_2:
 		if (nr->n2count == nr->n2) {
 			nr_disconnect(sk, ETIMEDOUT);
-			bh_unlock_sock(sk);
-			return;
+			goto out;
 		} else {
 			nr->n2count++;
 			nr_write_internal(sk, NR_DISCREQ);
@@ -231,8 +232,7 @@ static void nr_t1timer_expiry(struct timer_list *t)
 	case NR_STATE_3:
 		if (nr->n2count == nr->n2) {
 			nr_disconnect(sk, ETIMEDOUT);
-			bh_unlock_sock(sk);
-			return;
+			goto out;
 		} else {
 			nr->n2count++;
 			nr_requeue_frames(sk);
@@ -241,5 +241,7 @@ static void nr_t1timer_expiry(struct timer_list *t)
 	}
 
 	nr_start_t1timer(sk);
+out:
 	bh_unlock_sock(sk);
+	sock_put(sk);
 }
-- 
2.30.2

[PATCH 5.4 048/108] scsi: iscsi: Fix iface sysfs attr detection

[Greg Kroah-Hartman]

From: Mike Christie <michael.christie@oracle.com>

[ Upstream commit e746f3451ec7f91dcc9fd67a631239c715850a34 ]

A ISCSI_IFACE_PARAM can have the same value as a ISCSI_NET_PARAM so when
iscsi_iface_attr_is_visible tries to figure out the type by just checking
the value, we can collide and return the wrong type. When we call into the
driver we might not match and return that we don't want attr visible in
sysfs. The patch fixes this by setting the type when we figure out what the
param is.

Link: https://lore.kernel.org/r/20210701002559.89533-1-michael.christie@oracle.com
Fixes: 3e0f65b34cc9 ("[SCSI] iscsi_transport: Additional parameters for network settings")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/scsi_transport_iscsi.c | 90 +++++++++++------------------
 1 file changed, 34 insertions(+), 56 deletions(-)

diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 2f1553d0a10e..77bba91b5714 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -432,39 +432,10 @@ static umode_t iscsi_iface_attr_is_visible(struct kobject *kobj,
 	struct device *dev = container_of(kobj, struct device, kobj);
 	struct iscsi_iface *iface = iscsi_dev_to_iface(dev);
 	struct iscsi_transport *t = iface->transport;
-	int param;
-	int param_type;
+	int param = -1;
 
 	if (attr == &dev_attr_iface_enabled.attr)
 		param = ISCSI_NET_PARAM_IFACE_ENABLE;
-	else if (attr == &dev_attr_iface_vlan_id.attr)
-		param = ISCSI_NET_PARAM_VLAN_ID;
-	else if (attr == &dev_attr_iface_vlan_priority.attr)
-		param = ISCSI_NET_PARAM_VLAN_PRIORITY;
-	else if (attr == &dev_attr_iface_vlan_enabled.attr)
-		param = ISCSI_NET_PARAM_VLAN_ENABLED;
-	else if (attr == &dev_attr_iface_mtu.attr)
-		param = ISCSI_NET_PARAM_MTU;
-	else if (attr == &dev_attr_iface_port.attr)
-		param = ISCSI_NET_PARAM_PORT;
-	else if (attr == &dev_attr_iface_ipaddress_state.attr)
-		param = ISCSI_NET_PARAM_IPADDR_STATE;
-	else if (attr == &dev_attr_iface_delayed_ack_en.attr)
-		param = ISCSI_NET_PARAM_DELAYED_ACK_EN;
-	else if (attr == &dev_attr_iface_tcp_nagle_disable.attr)
-		param = ISCSI_NET_PARAM_TCP_NAGLE_DISABLE;
-	else if (attr == &dev_attr_iface_tcp_wsf_disable.attr)
-		param = ISCSI_NET_PARAM_TCP_WSF_DISABLE;
-	else if (attr == &dev_attr_iface_tcp_wsf.attr)
-		param = ISCSI_NET_PARAM_TCP_WSF;
-	else if (attr == &dev_attr_iface_tcp_timer_scale.attr)
-		param = ISCSI_NET_PARAM_TCP_TIMER_SCALE;
-	else if (attr == &dev_attr_iface_tcp_timestamp_en.attr)
-		param = ISCSI_NET_PARAM_TCP_TIMESTAMP_EN;
-	else if (attr == &dev_attr_iface_cache_id.attr)
-		param = ISCSI_NET_PARAM_CACHE_ID;
-	else if (attr == &dev_attr_iface_redirect_en.attr)
-		param = ISCSI_NET_PARAM_REDIRECT_EN;
 	else if (attr == &dev_attr_iface_def_taskmgmt_tmo.attr)
 		param = ISCSI_IFACE_PARAM_DEF_TASKMGMT_TMO;
 	else if (attr == &dev_attr_iface_header_digest.attr)
@@ -501,6 +472,38 @@ static umode_t iscsi_iface_attr_is_visible(struct kobject *kobj,
 		param = ISCSI_IFACE_PARAM_STRICT_LOGIN_COMP_EN;
 	else if (attr == &dev_attr_iface_initiator_name.attr)
 		param = ISCSI_IFACE_PARAM_INITIATOR_NAME;
+
+	if (param != -1)
+		return t->attr_is_visible(ISCSI_IFACE_PARAM, param);
+
+	if (attr == &dev_attr_iface_vlan_id.attr)
+		param = ISCSI_NET_PARAM_VLAN_ID;
+	else if (attr == &dev_attr_iface_vlan_priority.attr)
+		param = ISCSI_NET_PARAM_VLAN_PRIORITY;
+	else if (attr == &dev_attr_iface_vlan_enabled.attr)
+		param = ISCSI_NET_PARAM_VLAN_ENABLED;
+	else if (attr == &dev_attr_iface_mtu.attr)
+		param = ISCSI_NET_PARAM_MTU;
+	else if (attr == &dev_attr_iface_port.attr)
+		param = ISCSI_NET_PARAM_PORT;
+	else if (attr == &dev_attr_iface_ipaddress_state.attr)
+		param = ISCSI_NET_PARAM_IPADDR_STATE;
+	else if (attr == &dev_attr_iface_delayed_ack_en.attr)
+		param = ISCSI_NET_PARAM_DELAYED_ACK_EN;
+	else if (attr == &dev_attr_iface_tcp_nagle_disable.attr)
+		param = ISCSI_NET_PARAM_TCP_NAGLE_DISABLE;
+	else if (attr == &dev_attr_iface_tcp_wsf_disable.attr)
+		param = ISCSI_NET_PARAM_TCP_WSF_DISABLE;
+	else if (attr == &dev_attr_iface_tcp_wsf.attr)
+		param = ISCSI_NET_PARAM_TCP_WSF;
+	else if (attr == &dev_attr_iface_tcp_timer_scale.attr)
+		param = ISCSI_NET_PARAM_TCP_TIMER_SCALE;
+	else if (attr == &dev_attr_iface_tcp_timestamp_en.attr)
+		param = ISCSI_NET_PARAM_TCP_TIMESTAMP_EN;
+	else if (attr == &dev_attr_iface_cache_id.attr)
+		param = ISCSI_NET_PARAM_CACHE_ID;
+	else if (attr == &dev_attr_iface_redirect_en.attr)
+		param = ISCSI_NET_PARAM_REDIRECT_EN;
 	else if (iface->iface_type == ISCSI_IFACE_TYPE_IPV4) {
 		if (attr == &dev_attr_ipv4_iface_ipaddress.attr)
 			param = ISCSI_NET_PARAM_IPV4_ADDR;
@@ -591,32 +594,7 @@ static umode_t iscsi_iface_attr_is_visible(struct kobject *kobj,
 		return 0;
 	}
 
-	switch (param) {
-	case ISCSI_IFACE_PARAM_DEF_TASKMGMT_TMO:
-	case ISCSI_IFACE_PARAM_HDRDGST_EN:
-	case ISCSI_IFACE_PARAM_DATADGST_EN:
-	case ISCSI_IFACE_PARAM_IMM_DATA_EN:
-	case ISCSI_IFACE_PARAM_INITIAL_R2T_EN:
-	case ISCSI_IFACE_PARAM_DATASEQ_INORDER_EN:
-	case ISCSI_IFACE_PARAM_PDU_INORDER_EN:
-	case ISCSI_IFACE_PARAM_ERL:
-	case ISCSI_IFACE_PARAM_MAX_RECV_DLENGTH:
-	case ISCSI_IFACE_PARAM_FIRST_BURST:
-	case ISCSI_IFACE_PARAM_MAX_R2T:
-	case ISCSI_IFACE_PARAM_MAX_BURST:
-	case ISCSI_IFACE_PARAM_CHAP_AUTH_EN:
-	case ISCSI_IFACE_PARAM_BIDI_CHAP_EN:
-	case ISCSI_IFACE_PARAM_DISCOVERY_AUTH_OPTIONAL:
-	case ISCSI_IFACE_PARAM_DISCOVERY_LOGOUT_EN:
-	case ISCSI_IFACE_PARAM_STRICT_LOGIN_COMP_EN:
-	case ISCSI_IFACE_PARAM_INITIATOR_NAME:
-		param_type = ISCSI_IFACE_PARAM;
-		break;
-	default:
-		param_type = ISCSI_NET_PARAM;
-	}
-
-	return t->attr_is_visible(param_type, param);
+	return t->attr_is_visible(ISCSI_NET_PARAM, param);
 }
 
 static struct attribute *iscsi_iface_attrs[] = {
-- 
2.30.2

[PATCH 5.4 049/108] scsi: target: Fix protect handling in WRITE SAME(32)

[Greg Kroah-Hartman]

From: Dmitry Bogdanov <d.bogdanov@yadro.com>

[ Upstream commit 6d8e7e7c932162bccd06872362751b0e1d76f5af ]

WRITE SAME(32) command handling reads WRPROTECT at the wrong offset in 1st
byte instead of 10th byte.

Link: https://lore.kernel.org/r/20210702091655.22818-1-d.bogdanov@yadro.com
Fixes: afd73f1b60fc ("target: Perform PROTECT sanity checks for WRITE_SAME")
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/target_core_sbc.c | 35 ++++++++++++++++----------------
 1 file changed, 17 insertions(+), 18 deletions(-)

diff --git a/drivers/target/target_core_sbc.c b/drivers/target/target_core_sbc.c
index f1e81886122d..e63c163dba78 100644
--- a/drivers/target/target_core_sbc.c
+++ b/drivers/target/target_core_sbc.c
@@ -25,7 +25,7 @@
 #include "target_core_alua.h"
 
 static sense_reason_t
-sbc_check_prot(struct se_device *, struct se_cmd *, unsigned char *, u32, bool);
+sbc_check_prot(struct se_device *, struct se_cmd *, unsigned char, u32, bool);
 static sense_reason_t sbc_execute_unmap(struct se_cmd *cmd);
 
 static sense_reason_t
@@ -279,14 +279,14 @@ static inline unsigned long long transport_lba_64_ext(unsigned char *cdb)
 }
 
 static sense_reason_t
-sbc_setup_write_same(struct se_cmd *cmd, unsigned char *flags, struct sbc_ops *ops)
+sbc_setup_write_same(struct se_cmd *cmd, unsigned char flags, struct sbc_ops *ops)
 {
 	struct se_device *dev = cmd->se_dev;
 	sector_t end_lba = dev->transport->get_blocks(dev) + 1;
 	unsigned int sectors = sbc_get_write_same_sectors(cmd);
 	sense_reason_t ret;
 
-	if ((flags[0] & 0x04) || (flags[0] & 0x02)) {
+	if ((flags & 0x04) || (flags & 0x02)) {
 		pr_err("WRITE_SAME PBDATA and LBDATA"
 			" bits not supported for Block Discard"
 			" Emulation\n");
@@ -308,7 +308,7 @@ sbc_setup_write_same(struct se_cmd *cmd, unsigned char *flags, struct sbc_ops *o
 	}
 
 	/* We always have ANC_SUP == 0 so setting ANCHOR is always an error */
-	if (flags[0] & 0x10) {
+	if (flags & 0x10) {
 		pr_warn("WRITE SAME with ANCHOR not supported\n");
 		return TCM_INVALID_CDB_FIELD;
 	}
@@ -316,7 +316,7 @@ sbc_setup_write_same(struct se_cmd *cmd, unsigned char *flags, struct sbc_ops *o
 	 * Special case for WRITE_SAME w/ UNMAP=1 that ends up getting
 	 * translated into block discard requests within backend code.
 	 */
-	if (flags[0] & 0x08) {
+	if (flags & 0x08) {
 		if (!ops->execute_unmap)
 			return TCM_UNSUPPORTED_SCSI_OPCODE;
 
@@ -331,7 +331,7 @@ sbc_setup_write_same(struct se_cmd *cmd, unsigned char *flags, struct sbc_ops *o
 	if (!ops->execute_write_same)
 		return TCM_UNSUPPORTED_SCSI_OPCODE;
 
-	ret = sbc_check_prot(dev, cmd, &cmd->t_task_cdb[0], sectors, true);
+	ret = sbc_check_prot(dev, cmd, flags >> 5, sectors, true);
 	if (ret)
 		return ret;
 
@@ -686,10 +686,9 @@ sbc_set_prot_op_checks(u8 protect, bool fabric_prot, enum target_prot_type prot_
 }
 
 static sense_reason_t
-sbc_check_prot(struct se_device *dev, struct se_cmd *cmd, unsigned char *cdb,
+sbc_check_prot(struct se_device *dev, struct se_cmd *cmd, unsigned char protect,
 	       u32 sectors, bool is_write)
 {
-	u8 protect = cdb[1] >> 5;
 	int sp_ops = cmd->se_sess->sup_prot_ops;
 	int pi_prot_type = dev->dev_attrib.pi_prot_type;
 	bool fabric_prot = false;
@@ -737,7 +736,7 @@ sbc_check_prot(struct se_device *dev, struct se_cmd *cmd, unsigned char *cdb,
 		/* Fallthrough */
 	default:
 		pr_err("Unable to determine pi_prot_type for CDB: 0x%02x "
-		       "PROTECT: 0x%02x\n", cdb[0], protect);
+		       "PROTECT: 0x%02x\n", cmd->t_task_cdb[0], protect);
 		return TCM_INVALID_CDB_FIELD;
 	}
 
@@ -812,7 +811,7 @@ sbc_parse_cdb(struct se_cmd *cmd, struct sbc_ops *ops)
 		if (sbc_check_dpofua(dev, cmd, cdb))
 			return TCM_INVALID_CDB_FIELD;
 
-		ret = sbc_check_prot(dev, cmd, cdb, sectors, false);
+		ret = sbc_check_prot(dev, cmd, cdb[1] >> 5, sectors, false);
 		if (ret)
 			return ret;
 
@@ -826,7 +825,7 @@ sbc_parse_cdb(struct se_cmd *cmd, struct sbc_ops *ops)
 		if (sbc_check_dpofua(dev, cmd, cdb))
 			return TCM_INVALID_CDB_FIELD;
 
-		ret = sbc_check_prot(dev, cmd, cdb, sectors, false);
+		ret = sbc_check_prot(dev, cmd, cdb[1] >> 5, sectors, false);
 		if (ret)
 			return ret;
 
@@ -840,7 +839,7 @@ sbc_parse_cdb(struct se_cmd *cmd, struct sbc_ops *ops)
 		if (sbc_check_dpofua(dev, cmd, cdb))
 			return TCM_INVALID_CDB_FIELD;
 
-		ret = sbc_check_prot(dev, cmd, cdb, sectors, false);
+		ret = sbc_check_prot(dev, cmd, cdb[1] >> 5, sectors, false);
 		if (ret)
 			return ret;
 
@@ -861,7 +860,7 @@ sbc_parse_cdb(struct se_cmd *cmd, struct sbc_ops *ops)
 		if (sbc_check_dpofua(dev, cmd, cdb))
 			return TCM_INVALID_CDB_FIELD;
 
-		ret = sbc_check_prot(dev, cmd, cdb, sectors, true);
+		ret = sbc_check_prot(dev, cmd, cdb[1] >> 5, sectors, true);
 		if (ret)
 			return ret;
 
@@ -875,7 +874,7 @@ sbc_parse_cdb(struct se_cmd *cmd, struct sbc_ops *ops)
 		if (sbc_check_dpofua(dev, cmd, cdb))
 			return TCM_INVALID_CDB_FIELD;
 
-		ret = sbc_check_prot(dev, cmd, cdb, sectors, true);
+		ret = sbc_check_prot(dev, cmd, cdb[1] >> 5, sectors, true);
 		if (ret)
 			return ret;
 
@@ -890,7 +889,7 @@ sbc_parse_cdb(struct se_cmd *cmd, struct sbc_ops *ops)
 		if (sbc_check_dpofua(dev, cmd, cdb))
 			return TCM_INVALID_CDB_FIELD;
 
-		ret = sbc_check_prot(dev, cmd, cdb, sectors, true);
+		ret = sbc_check_prot(dev, cmd, cdb[1] >> 5, sectors, true);
 		if (ret)
 			return ret;
 
@@ -949,7 +948,7 @@ sbc_parse_cdb(struct se_cmd *cmd, struct sbc_ops *ops)
 			size = sbc_get_size(cmd, 1);
 			cmd->t_task_lba = get_unaligned_be64(&cdb[12]);
 
-			ret = sbc_setup_write_same(cmd, &cdb[10], ops);
+			ret = sbc_setup_write_same(cmd, cdb[10], ops);
 			if (ret)
 				return ret;
 			break;
@@ -1048,7 +1047,7 @@ sbc_parse_cdb(struct se_cmd *cmd, struct sbc_ops *ops)
 		size = sbc_get_size(cmd, 1);
 		cmd->t_task_lba = get_unaligned_be64(&cdb[2]);
 
-		ret = sbc_setup_write_same(cmd, &cdb[1], ops);
+		ret = sbc_setup_write_same(cmd, cdb[1], ops);
 		if (ret)
 			return ret;
 		break;
@@ -1066,7 +1065,7 @@ sbc_parse_cdb(struct se_cmd *cmd, struct sbc_ops *ops)
 		 * Follow sbcr26 with WRITE_SAME (10) and check for the existence
 		 * of byte 1 bit 3 UNMAP instead of original reserved field
 		 */
-		ret = sbc_setup_write_same(cmd, &cdb[1], ops);
+		ret = sbc_setup_write_same(cmd, cdb[1], ops);
 		if (ret)
 			return ret;
 		break;
-- 
2.30.2

[PATCH 5.4 050/108] spi: cadence: Correct initialisation of runtime PM again

[Greg Kroah-Hartman]

From: Marek Vasut <marex@denx.de>

[ Upstream commit 56912da7a68c8356df6a6740476237441b0b792a ]

The original implementation of RPM handling in probe() was mostly
correct, except it failed to call pm_runtime_get_*() to activate the
hardware. The subsequent fix, 734882a8bf98 ("spi: cadence: Correct
initialisation of runtime PM"), breaks the implementation further,
to the point where the system using this hard IP on ZynqMP hangs on
boot, because it accesses hardware which is gated off.

Undo 734882a8bf98 ("spi: cadence: Correct initialisation of runtime
PM") and instead add missing pm_runtime_get_noresume() and move the
RPM disabling all the way to the end of probe(). That makes ZynqMP
not hang on boot yet again.

Fixes: 734882a8bf98 ("spi: cadence: Correct initialisation of runtime PM")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Charles Keepax <ckeepax@opensource.cirrus.com>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210716182133.218640-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-cadence.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/drivers/spi/spi-cadence.c b/drivers/spi/spi-cadence.c
index 1d0c335b0bf8..5ac60d06c674 100644
--- a/drivers/spi/spi-cadence.c
+++ b/drivers/spi/spi-cadence.c
@@ -517,6 +517,12 @@ static int cdns_spi_probe(struct platform_device *pdev)
 		goto clk_dis_apb;
 	}
 
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT);
+	pm_runtime_get_noresume(&pdev->dev);
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+
 	ret = of_property_read_u32(pdev->dev.of_node, "num-cs", &num_cs);
 	if (ret < 0)
 		master->num_chipselect = CDNS_SPI_DEFAULT_NUM_CS;
@@ -531,11 +537,6 @@ static int cdns_spi_probe(struct platform_device *pdev)
 	/* SPI controller initializations */
 	cdns_spi_init_hw(xspi);
 
-	pm_runtime_set_active(&pdev->dev);
-	pm_runtime_enable(&pdev->dev);
-	pm_runtime_use_autosuspend(&pdev->dev);
-	pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT);
-
 	irq = platform_get_irq(pdev, 0);
 	if (irq <= 0) {
 		ret = -ENXIO;
@@ -566,6 +567,9 @@ static int cdns_spi_probe(struct platform_device *pdev)
 
 	master->bits_per_word_mask = SPI_BPW_MASK(8);
 
+	pm_runtime_mark_last_busy(&pdev->dev);
+	pm_runtime_put_autosuspend(&pdev->dev);
+
 	ret = spi_register_master(master);
 	if (ret) {
 		dev_err(&pdev->dev, "spi_register_master failed\n");
-- 
2.30.2

[PATCH 5.4 051/108] bnxt_en: Improve bnxt_ulp_stop()/bnxt_ulp_start() call sequence.

[Greg Kroah-Hartman]

From: Vasundhara Volam <vasundhara-v.volam@broadcom.com>

[ Upstream commit aa46dffff452f7c6d907c4e6a0062e2c53a87fc0 ]

We call bnxt_ulp_stop() to notify the RDMA driver that some error or
imminent reset is about to happen.  After that we always call
some variants of bnxt_close().

In the next patch, we will integrate the recently added error
recovery with the RDMA driver.  In response to ulp_stop, the
RDMA driver may free MSIX vectors and that will also trigger
bnxt_close().  To avoid bnxt_close() from being called twice,
we set a new flag after ulp_stop is called.  If the RDMA driver
frees MSIX vectors while the new flag is set, we will not call
bnxt_close(), knowing that it will happen in due course.

With this change, we must make sure that the bnxt_close() call
after ulp_stop will reset IRQ.  Modify bnxt_reset_task()
accordingly if we call ulp_stop.

Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c     | 18 ++++++++++--------
 drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c | 10 ++++++++--
 drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.h |  3 ++-
 3 files changed, 20 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index d1c3939b0307..e840aae894ff 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -9987,12 +9987,15 @@ static void bnxt_reset_task(struct bnxt *bp, bool silent)
 	if (netif_running(bp->dev)) {
 		int rc;
 
-		if (!silent)
+		if (silent) {
+			bnxt_close_nic(bp, false, false);
+			bnxt_open_nic(bp, false, false);
+		} else {
 			bnxt_ulp_stop(bp);
-		bnxt_close_nic(bp, false, false);
-		rc = bnxt_open_nic(bp, false, false);
-		if (!silent && !rc)
-			bnxt_ulp_start(bp);
+			bnxt_close_nic(bp, true, false);
+			rc = bnxt_open_nic(bp, true, false);
+			bnxt_ulp_start(bp, rc);
+		}
 	}
 }
 
@@ -12144,10 +12147,9 @@ static pci_ers_result_t bnxt_io_slot_reset(struct pci_dev *pdev)
 		if (!err && netif_running(netdev))
 			err = bnxt_open(netdev);
 
-		if (!err) {
+		if (!err)
 			result = PCI_ERS_RESULT_RECOVERED;
-			bnxt_ulp_start(bp);
-		}
+		bnxt_ulp_start(bp, err);
 	}
 
 	if (result != PCI_ERS_RESULT_RECOVERED) {
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c
index 13ef6a9afaa0..85bacaed763e 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c
@@ -186,7 +186,7 @@ static int bnxt_free_msix_vecs(struct bnxt_en_dev *edev, int ulp_id)
 
 	edev->ulp_tbl[ulp_id].msix_requested = 0;
 	edev->flags &= ~BNXT_EN_FLAG_MSIX_REQUESTED;
-	if (netif_running(dev)) {
+	if (netif_running(dev) && !(edev->flags & BNXT_EN_FLAG_ULP_STOPPED)) {
 		bnxt_close_nic(bp, true, false);
 		bnxt_open_nic(bp, true, false);
 	}
@@ -274,6 +274,7 @@ void bnxt_ulp_stop(struct bnxt *bp)
 	if (!edev)
 		return;
 
+	edev->flags |= BNXT_EN_FLAG_ULP_STOPPED;
 	for (i = 0; i < BNXT_MAX_ULP; i++) {
 		struct bnxt_ulp *ulp = &edev->ulp_tbl[i];
 
@@ -284,7 +285,7 @@ void bnxt_ulp_stop(struct bnxt *bp)
 	}
 }
 
-void bnxt_ulp_start(struct bnxt *bp)
+void bnxt_ulp_start(struct bnxt *bp, int err)
 {
 	struct bnxt_en_dev *edev = bp->edev;
 	struct bnxt_ulp_ops *ops;
@@ -293,6 +294,11 @@ void bnxt_ulp_start(struct bnxt *bp)
 	if (!edev)
 		return;
 
+	edev->flags &= ~BNXT_EN_FLAG_ULP_STOPPED;
+
+	if (err)
+		return;
+
 	for (i = 0; i < BNXT_MAX_ULP; i++) {
 		struct bnxt_ulp *ulp = &edev->ulp_tbl[i];
 
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.h b/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.h
index cd78453d0bf0..9895406b9830 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.h
@@ -64,6 +64,7 @@ struct bnxt_en_dev {
 	#define BNXT_EN_FLAG_ROCE_CAP		(BNXT_EN_FLAG_ROCEV1_CAP | \
 						 BNXT_EN_FLAG_ROCEV2_CAP)
 	#define BNXT_EN_FLAG_MSIX_REQUESTED	0x4
+	#define BNXT_EN_FLAG_ULP_STOPPED	0x8
 	const struct bnxt_en_ops	*en_ops;
 	struct bnxt_ulp			ulp_tbl[BNXT_MAX_ULP];
 };
@@ -92,7 +93,7 @@ int bnxt_get_ulp_msix_num(struct bnxt *bp);
 int bnxt_get_ulp_msix_base(struct bnxt *bp);
 int bnxt_get_ulp_stat_ctxs(struct bnxt *bp);
 void bnxt_ulp_stop(struct bnxt *bp);
-void bnxt_ulp_start(struct bnxt *bp);
+void bnxt_ulp_start(struct bnxt *bp, int err);
 void bnxt_ulp_sriov_cfg(struct bnxt *bp, int num_vfs);
 void bnxt_ulp_shutdown(struct bnxt *bp);
 void bnxt_ulp_irq_stop(struct bnxt *bp);
-- 
2.30.2

[PATCH 5.4 052/108] bnxt_en: Refresh RoCE capabilities in bnxt_ulp_probe()

[Greg Kroah-Hartman]

From: Michael Chan <michael.chan@broadcom.com>

[ Upstream commit 2c9f046bc377efd1f5e26e74817d5f96e9506c86 ]

The capabilities can change after firmware upgrade/downgrade, so we
should get the up-to-date RoCE capabilities everytime bnxt_ulp_probe()
is called.

Fixes: 2151fe0830fd ("bnxt_en: Handle RESET_NOTIFY async event from firmware.")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c
index 85bacaed763e..b0ae180df4e6 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c
@@ -473,13 +473,14 @@ struct bnxt_en_dev *bnxt_ulp_probe(struct net_device *dev)
 		if (!edev)
 			return ERR_PTR(-ENOMEM);
 		edev->en_ops = &bnxt_en_ops_tbl;
-		if (bp->flags & BNXT_FLAG_ROCEV1_CAP)
-			edev->flags |= BNXT_EN_FLAG_ROCEV1_CAP;
-		if (bp->flags & BNXT_FLAG_ROCEV2_CAP)
-			edev->flags |= BNXT_EN_FLAG_ROCEV2_CAP;
 		edev->net = dev;
 		edev->pdev = bp->pdev;
 		bp->edev = edev;
 	}
+	edev->flags &= ~BNXT_EN_FLAG_ROCE_CAP;
+	if (bp->flags & BNXT_FLAG_ROCEV1_CAP)
+		edev->flags |= BNXT_EN_FLAG_ROCEV1_CAP;
+	if (bp->flags & BNXT_FLAG_ROCEV2_CAP)
+		edev->flags |= BNXT_EN_FLAG_ROCEV2_CAP;
 	return bp->edev;
 }
-- 
2.30.2

[PATCH 5.4 053/108] bnxt_en: Add missing check for BNXT_STATE_ABORT_ERR in bnxt_fw_rset_task()

[Greg Kroah-Hartman]

From: Michael Chan <michael.chan@broadcom.com>

[ Upstream commit 6cd657cb3ee6f4de57e635b126ffbe0e51d00f1a ]

In the BNXT_FW_RESET_STATE_POLL_VF state in bnxt_fw_reset_task() after all
VFs have unregistered, we need to check for BNXT_STATE_ABORT_ERR after
we acquire the rtnl_lock.  If the flag is set, we need to abort.

Fixes: 230d1f0de754 ("bnxt_en: Handle firmware reset.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index e840aae894ff..f4f63c359bdb 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -10735,6 +10735,10 @@ static void bnxt_fw_reset_task(struct work_struct *work)
 		}
 		bp->fw_reset_timestamp = jiffies;
 		rtnl_lock();
+		if (test_bit(BNXT_STATE_ABORT_ERR, &bp->state)) {
+			rtnl_unlock();
+			goto fw_reset_abort;
+		}
 		bnxt_fw_reset_close(bp);
 		if (bp->fw_cap & BNXT_FW_CAP_ERR_RECOVER_RELOAD) {
 			bp->fw_reset_state = BNXT_FW_RESET_STATE_POLL_FW_DOWN;
-- 
2.30.2

[PATCH 5.4 054/108] bnxt_en: Check abort error state in bnxt_half_open_nic()

[Greg Kroah-Hartman]

From: Somnath Kotur <somnath.kotur@broadcom.com>

[ Upstream commit 11a39259ff79b74bc99f8b7c44075a2d6d5e7ab1 ]

bnxt_half_open_nic() is called during during ethtool self test and is
protected by rtnl_lock.  Firmware reset can be happening at the same
time.  Only critical portions of the entire firmware reset sequence
are protected by the rtnl_lock.  It is possible that bnxt_half_open_nic()
can be called when the firmware reset sequence is aborting.  In that
case, bnxt_half_open_nic() needs to check if the ABORT_ERR flag is set
and abort if it is.  The ethtool self test will fail but the NIC will be
brought to a consistent IF_DOWN state.

Without this patch, if bnxt_half_open_nic() were to continue in this
error state, it may crash like this:

  bnxt_en 0000:82:00.1 enp130s0f1np1: FW reset in progress during close, FW reset will be aborted
  Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
  ...
  Process ethtool (pid: 333327, stack limit = 0x0000000046476577)
  Call trace:
  bnxt_alloc_mem+0x444/0xef0 [bnxt_en]
  bnxt_half_open_nic+0x24/0xb8 [bnxt_en]
  bnxt_self_test+0x2dc/0x390 [bnxt_en]
  ethtool_self_test+0xe0/0x1f8
  dev_ethtool+0x1744/0x22d0
  dev_ioctl+0x190/0x3e0
  sock_ioctl+0x238/0x480
  do_vfs_ioctl+0xc4/0x758
  ksys_ioctl+0x84/0xb8
  __arm64_sys_ioctl+0x28/0x38
  el0_svc_handler+0xb0/0x180
  el0_svc+0x8/0xc

Fixes: a1301f08c5ac ("bnxt_en: Check abort error state in bnxt_open_nic().")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index f4f63c359bdb..287ea792922a 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -9239,6 +9239,12 @@ int bnxt_half_open_nic(struct bnxt *bp)
 {
 	int rc = 0;
 
+	if (test_bit(BNXT_STATE_ABORT_ERR, &bp->state)) {
+		netdev_err(bp->dev, "A previous firmware reset has not completed, aborting half open\n");
+		rc = -ENODEV;
+		goto half_open_err;
+	}
+
 	rc = bnxt_alloc_mem(bp, false);
 	if (rc) {
 		netdev_err(bp->dev, "bnxt_alloc_mem err: %x\n", rc);
-- 
2.30.2

[PATCH 5.4 055/108] net: hisilicon: rename CACHE_LINE_MASK to avoid redefinition

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit b16f3299ae1aa3c327e1fb742d0379ae4d6e86f2 ]

Building on ARCH=arc causes a "redefined" warning, so rename this
driver's CACHE_LINE_MASK to avoid the warning.

../drivers/net/ethernet/hisilicon/hip04_eth.c:134: warning: "CACHE_LINE_MASK" redefined
  134 | #define CACHE_LINE_MASK   0x3F
In file included from ../include/linux/cache.h:6,
                 from ../include/linux/printk.h:9,
                 from ../include/linux/kernel.h:19,
                 from ../include/linux/list.h:9,
                 from ../include/linux/module.h:12,
                 from ../drivers/net/ethernet/hisilicon/hip04_eth.c:7:
../arch/arc/include/asm/cache.h:17: note: this is the location of the previous definition
   17 | #define CACHE_LINE_MASK  (~(L1_CACHE_BYTES - 1))

Fixes: d413779cdd93 ("net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hip04_eth.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hip04_eth.c b/drivers/net/ethernet/hisilicon/hip04_eth.c
index 2ffe035e96d6..b5eae06dd870 100644
--- a/drivers/net/ethernet/hisilicon/hip04_eth.c
+++ b/drivers/net/ethernet/hisilicon/hip04_eth.c
@@ -131,7 +131,7 @@
 /* buf unit size is cache_line_size, which is 64, so the shift is 6 */
 #define PPE_BUF_SIZE_SHIFT		6
 #define PPE_TX_BUF_HOLD			BIT(31)
-#define CACHE_LINE_MASK			0x3F
+#define SOC_CACHE_LINE_MASK		0x3F
 #else
 #define PPE_CFG_QOS_VMID_GRP_SHIFT	8
 #define PPE_CFG_RX_CTRL_ALIGN_SHIFT	11
@@ -531,8 +531,8 @@ hip04_mac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 #if defined(CONFIG_HI13X1_GMAC)
 	desc->cfg = (__force u32)cpu_to_be32(TX_CLEAR_WB | TX_FINISH_CACHE_INV
 		| TX_RELEASE_TO_PPE | priv->port << TX_POOL_SHIFT);
-	desc->data_offset = (__force u32)cpu_to_be32(phys & CACHE_LINE_MASK);
-	desc->send_addr =  (__force u32)cpu_to_be32(phys & ~CACHE_LINE_MASK);
+	desc->data_offset = (__force u32)cpu_to_be32(phys & SOC_CACHE_LINE_MASK);
+	desc->send_addr =  (__force u32)cpu_to_be32(phys & ~SOC_CACHE_LINE_MASK);
 #else
 	desc->cfg = (__force u32)cpu_to_be32(TX_CLEAR_WB | TX_FINISH_CACHE_INV);
 	desc->send_addr = (__force u32)cpu_to_be32(phys);
-- 
2.30.2

[PATCH 5.4 056/108] net/tcp_fastopen: fix data races around tfo_active_disable_stamp

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 6f20c8adb1813467ea52c1296d52c4e95978cb2f ]

tfo_active_disable_stamp is read and written locklessly.
We need to annotate these accesses appropriately.

Then, we need to perform the atomic_inc(tfo_active_disable_times)
after the timestamp has been updated, and thus add barriers
to make sure tcp_fastopen_active_should_disable() wont read
a stale timestamp.

Fixes: cf1ef3f0719b ("net/tcp_fastopen: Disable active side TFO in certain scenarios")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Wei Wang <weiwan@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/tcp_fastopen.c | 19 ++++++++++++++++---
 1 file changed, 16 insertions(+), 3 deletions(-)

diff --git a/net/ipv4/tcp_fastopen.c b/net/ipv4/tcp_fastopen.c
index a9971e41f31b..8af4fefe371f 100644
--- a/net/ipv4/tcp_fastopen.c
+++ b/net/ipv4/tcp_fastopen.c
@@ -504,8 +504,15 @@ void tcp_fastopen_active_disable(struct sock *sk)
 {
 	struct net *net = sock_net(sk);
 
+	/* Paired with READ_ONCE() in tcp_fastopen_active_should_disable() */
+	WRITE_ONCE(net->ipv4.tfo_active_disable_stamp, jiffies);
+
+	/* Paired with smp_rmb() in tcp_fastopen_active_should_disable().
+	 * We want net->ipv4.tfo_active_disable_stamp to be updated first.
+	 */
+	smp_mb__before_atomic();
 	atomic_inc(&net->ipv4.tfo_active_disable_times);
-	net->ipv4.tfo_active_disable_stamp = jiffies;
+
 	NET_INC_STATS(net, LINUX_MIB_TCPFASTOPENBLACKHOLE);
 }
 
@@ -523,10 +530,16 @@ bool tcp_fastopen_active_should_disable(struct sock *sk)
 	if (!tfo_da_times)
 		return false;
 
+	/* Paired with smp_mb__before_atomic() in tcp_fastopen_active_disable() */
+	smp_rmb();
+
 	/* Limit timout to max: 2^6 * initial timeout */
 	multiplier = 1 << min(tfo_da_times - 1, 6);
-	timeout = multiplier * tfo_bh_timeout * HZ;
-	if (time_before(jiffies, sock_net(sk)->ipv4.tfo_active_disable_stamp + timeout))
+
+	/* Paired with the WRITE_ONCE() in tcp_fastopen_active_disable(). */
+	timeout = READ_ONCE(sock_net(sk)->ipv4.tfo_active_disable_stamp) +
+		  multiplier * tfo_bh_timeout * HZ;
+	if (time_before(jiffies, timeout))
 		return true;
 
 	/* Mark check bit so we can check for successful active TFO
-- 
2.30.2

[PATCH 5.4 057/108] net: hns3: fix rx VLAN offload state inconsistent issue

[Greg Kroah-Hartman]

From: Jian Shen <shenjian15@huawei.com>

[ Upstream commit bbfd4506f962e7e6fff8f37f017154a3c3791264 ]

Currently, VF doesn't enable rx VLAN offload when initializating,
and PF does it for VFs. If user disable the rx VLAN offload for
VF with ethtool -K, and reload the VF driver, it may cause the
rx VLAN offload state being inconsistent between hardware and
software.

Fixes it by enabling rx VLAN offload when VF initializing.

Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c  | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index fc275d4f484c..ea348ebbbf2e 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -2119,6 +2119,16 @@ static int hclgevf_rss_init_hw(struct hclgevf_dev *hdev)
 
 static int hclgevf_init_vlan_config(struct hclgevf_dev *hdev)
 {
+	struct hnae3_handle *nic = &hdev->nic;
+	int ret;
+
+	ret = hclgevf_en_hw_strip_rxvtag(nic, true);
+	if (ret) {
+		dev_err(&hdev->pdev->dev,
+			"failed to enable rx vlan offload, ret = %d\n", ret);
+		return ret;
+	}
+
 	return hclgevf_set_vlan_filter(&hdev->nic, htons(ETH_P_8021Q), 0,
 				       false);
 }
-- 
2.30.2

[PATCH 5.4 058/108] net/sched: act_skbmod: Skip non-Ethernet packets

[Greg Kroah-Hartman]

From: Peilin Ye <peilin.ye@bytedance.com>

[ Upstream commit 727d6a8b7ef3d25080fad228b2c4a1d4da5999c6 ]

Currently tcf_skbmod_act() assumes that packets use Ethernet as their L2
protocol, which is not always the case.  As an example, for CAN devices:

	$ ip link add dev vcan0 type vcan
	$ ip link set up vcan0
	$ tc qdisc add dev vcan0 root handle 1: htb
	$ tc filter add dev vcan0 parent 1: protocol ip prio 10 \
		matchall action skbmod swap mac

Doing the above silently corrupts all the packets.  Do not perform skbmod
actions for non-Ethernet packets.

Fixes: 86da71b57383 ("net_sched: Introduce skbmod action")
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sched/act_skbmod.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/net/sched/act_skbmod.c b/net/sched/act_skbmod.c
index e858a0a9c045..f60d349542b1 100644
--- a/net/sched/act_skbmod.c
+++ b/net/sched/act_skbmod.c
@@ -6,6 +6,7 @@
 */
 
 #include <linux/module.h>
+#include <linux/if_arp.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/skbuff.h>
@@ -33,6 +34,13 @@ static int tcf_skbmod_act(struct sk_buff *skb, const struct tc_action *a,
 	tcf_lastuse_update(&d->tcf_tm);
 	bstats_cpu_update(this_cpu_ptr(d->common.cpu_bstats), skb);
 
+	action = READ_ONCE(d->tcf_action);
+	if (unlikely(action == TC_ACT_SHOT))
+		goto drop;
+
+	if (!skb->dev || skb->dev->type != ARPHRD_ETHER)
+		return action;
+
 	/* XXX: if you are going to edit more fields beyond ethernet header
 	 * (example when you add IP header replacement or vlan swap)
 	 * then MAX_EDIT_LEN needs to change appropriately
@@ -41,10 +49,6 @@ static int tcf_skbmod_act(struct sk_buff *skb, const struct tc_action *a,
 	if (unlikely(err)) /* best policy is to drop on the floor */
 		goto drop;
 
-	action = READ_ONCE(d->tcf_action);
-	if (unlikely(action == TC_ACT_SHOT))
-		goto drop;
-
 	p = rcu_dereference_bh(d->skbmod_p);
 	flags = p->flags;
 	if (flags & SKBMOD_F_DMAC)
-- 
2.30.2

[PATCH 5.4 059/108] ipv6: fix another slab-out-of-bounds in fib6_nh_flush_exceptions

[Greg Kroah-Hartman]

From: Paolo Abeni <pabeni@redhat.com>

[ Upstream commit 8fb4792f091e608a0a1d353dfdf07ef55a719db5 ]

While running the self-tests on a KASAN enabled kernel, I observed a
slab-out-of-bounds splat very similar to the one reported in
commit 821bbf79fe46 ("ipv6: Fix KASAN: slab-out-of-bounds Read in
 fib6_nh_flush_exceptions").

We additionally need to take care of fib6_metrics initialization
failure when the caller provides an nh.

The fix is similar, explicitly free the route instead of calling
fib6_info_release on a half-initialized object.

Fixes: f88d8ea67fbdb ("ipv6: Plumb support for nexthop object in a fib6_info")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/route.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index b903fe28ce50..d6fc22f7d7a6 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -3655,7 +3655,7 @@ static struct fib6_info *ip6_route_info_create(struct fib6_config *cfg,
 		err = PTR_ERR(rt->fib6_metrics);
 		/* Do not leave garbage there. */
 		rt->fib6_metrics = (struct dst_metrics *)&dst_default_metrics;
-		goto out;
+		goto out_free;
 	}
 
 	if (cfg->fc_flags & RTF_ADDRCONF)
-- 
2.30.2

[PATCH 5.4 060/108] nvme-pci: dont WARN_ON in nvme_reset_work if ctrl.state is not RESETTING

[Greg Kroah-Hartman]

From: Zhihao Cheng <chengzhihao1@huawei.com>

[ Upstream commit 7764656b108cd308c39e9a8554353b8f9ca232a3 ]

Followling process:
nvme_probe
  nvme_reset_ctrl
    nvme_change_ctrl_state(ctrl, NVME_CTRL_RESETTING)
    queue_work(nvme_reset_wq, &ctrl->reset_work)

-------------->	nvme_remove
		  nvme_change_ctrl_state(&dev->ctrl, NVME_CTRL_DELETING)
worker_thread
  process_one_work
    nvme_reset_work
    WARN_ON(dev->ctrl.state != NVME_CTRL_RESETTING)

, which will trigger WARN_ON in nvme_reset_work():
[  127.534298] WARNING: CPU: 0 PID: 139 at drivers/nvme/host/pci.c:2594
[  127.536161] CPU: 0 PID: 139 Comm: kworker/u8:7 Not tainted 5.13.0
[  127.552518] Call Trace:
[  127.552840]  ? kvm_sched_clock_read+0x25/0x40
[  127.553936]  ? native_send_call_func_single_ipi+0x1c/0x30
[  127.555117]  ? send_call_function_single_ipi+0x9b/0x130
[  127.556263]  ? __smp_call_single_queue+0x48/0x60
[  127.557278]  ? ttwu_queue_wakelist+0xfa/0x1c0
[  127.558231]  ? try_to_wake_up+0x265/0x9d0
[  127.559120]  ? ext4_end_io_rsv_work+0x160/0x290
[  127.560118]  process_one_work+0x28c/0x640
[  127.561002]  worker_thread+0x39a/0x700
[  127.561833]  ? rescuer_thread+0x580/0x580
[  127.562714]  kthread+0x18c/0x1e0
[  127.563444]  ? set_kthread_struct+0x70/0x70
[  127.564347]  ret_from_fork+0x1f/0x30

The preceding problem can be easily reproduced by executing following
script (based on blktests suite):
test() {
  pdev="$(_get_pci_dev_from_blkdev)"
  sysfs="/sys/bus/pci/devices/${pdev}"
  for ((i = 0; i < 10; i++)); do
    echo 1 > "$sysfs/remove"
    echo 1 > /sys/bus/pci/rescan
  done
}

Since the device ctrl could be updated as an non-RESETTING state by
repeating probe/remove in userspace (which is a normal situation), we
can replace stack dumping WARN_ON with a warnning message.

Fixes: 82b057caefaff ("nvme-pci: fix multiple ctrl removal schedulin")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/pci.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index f9dba1a3e655..af516c35afe6 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -2590,7 +2590,9 @@ static void nvme_reset_work(struct work_struct *work)
 	bool was_suspend = !!(dev->ctrl.ctrl_config & NVME_CC_SHN_NORMAL);
 	int result;
 
-	if (WARN_ON(dev->ctrl.state != NVME_CTRL_RESETTING)) {
+	if (dev->ctrl.state != NVME_CTRL_RESETTING) {
+		dev_warn(dev->ctrl.device, "ctrl state %d is not RESETTING\n",
+			 dev->ctrl.state);
 		result = -ENODEV;
 		goto out;
 	}
-- 
2.30.2

[PATCH 5.4 061/108] Revert "USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem"

[Greg Kroah-Hartman]

From: Vincent Palatin <vpalatin@chromium.org>

[ Upstream commit f3a1a937f7b240be623d989c8553a6d01465d04f ]

This reverts commit 0bd860493f81eb2a46173f6f5e44cc38331c8dbd.

While the patch was working as stated,ie preventing the L850-GL LTE modem
from crashing on some U3 wake-ups due to a race condition between the
host wake-up and the modem-side wake-up, when using the MBIM interface,
this would force disabling the USB runtime PM on the device.

The increased power consumption is significant for LTE laptops,
and given that with decently recent modem firmwares, when the modem hits
the bug, it automatically recovers (ie it drops from the bus, but
automatically re-enumerates after less than half a second, rather than being
stuck until a power cycle as it was doing with ancient firmware), for
most people, the trade-off now seems in favor of re-enabling it by
default.

For people with access to the platform code, the bug can also be worked-around
successfully by changing the USB3 LFPM polling off-time for the XHCI
controller in the BIOS code.

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Link: https://lore.kernel.org/r/20210721092516.2775971-1-vpalatin@chromium.org
Fixes: 0bd860493f81 ("USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/core/quirks.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index f6a6c54cba35..d97544fd339b 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -502,10 +502,6 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* DJI CineSSD */
 	{ USB_DEVICE(0x2ca3, 0x0031), .driver_info = USB_QUIRK_NO_LPM },
 
-	/* Fibocom L850-GL LTE Modem */
-	{ USB_DEVICE(0x2cb7, 0x0007), .driver_info =
-			USB_QUIRK_IGNORE_REMOTE_WAKEUP },
-
 	/* INTEL VALUE SSD */
 	{ USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME },
 
-- 
2.30.2

[PATCH 5.4 062/108] afs: Fix tracepoint string placement with built-in AFS

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 6c881ca0b3040f3e724eae513117ba4ddef86057 ]

To quote Alexey[1]:

    I was adding custom tracepoint to the kernel, grabbed full F34 kernel
    .config, disabled modules and booted whole shebang as VM kernel.

    Then did

	perf record -a -e ...

    It crashed:

	general protection fault, probably for non-canonical address 0x435f5346592e4243: 0000 [#1] SMP PTI
	CPU: 1 PID: 842 Comm: cat Not tainted 5.12.6+ #26
	Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
	RIP: 0010:t_show+0x22/0xd0

    Then reproducer was narrowed to

	# cat /sys/kernel/tracing/printk_formats

    Original F34 kernel with modules didn't crash.

    So I started to disable options and after disabling AFS everything
    started working again.

    The root cause is that AFS was placing char arrays content into a
    section full of _pointers_ to strings with predictable consequences.

    Non canonical address 435f5346592e4243 is "CB.YFS_" which came from
    CM_NAME macro.

    Steps to reproduce:

	CONFIG_AFS=y
	CONFIG_TRACING=y

	# cat /sys/kernel/tracing/printk_formats

Fix this by the following means:

 (1) Add enum->string translation tables in the event header with the AFS
     and YFS cache/callback manager operations listed by RPC operation ID.

 (2) Modify the afs_cb_call tracepoint to print the string from the
     translation table rather than using the string at the afs_call name
     pointer.

 (3) Switch translation table depending on the service we're being accessed
     as (AFS or YFS) in the tracepoint print clause.  Will this cause
     problems to userspace utilities?

     Note that the symbolic representation of the YFS service ID isn't
     available to this header, so I've put it in as a number.  I'm not sure
     if this is the best way to do this.

 (4) Remove the name wrangling (CM_NAME) macro and put the names directly
     into the afs_call_type structs in cmservice.c.

Fixes: 8e8d7f13b6d5a9 ("afs: Add some tracepoints")
Reported-by: Alexey Dobriyan (SK hynix) <adobriyan@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: Andrew Morton <akpm@linux-foundation.org>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/YLAXfvZ+rObEOdc%2F@localhost.localdomain/ [1]
Link: https://lore.kernel.org/r/643721.1623754699@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/162430903582.2896199.6098150063997983353.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/162609463957.3133237.15916579353149746363.stgit@warthog.procyon.org.uk/ # v1 (repost)
Link: https://lore.kernel.org/r/162610726860.3408253.445207609466288531.stgit@warthog.procyon.org.uk/ # v2
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/afs/cmservice.c         | 25 ++++----------
 include/trace/events/afs.h | 67 +++++++++++++++++++++++++++++++++++---
 2 files changed, 69 insertions(+), 23 deletions(-)

diff --git a/fs/afs/cmservice.c b/fs/afs/cmservice.c
index fc5eb0f89304..c2e82b84c554 100644
--- a/fs/afs/cmservice.c
+++ b/fs/afs/cmservice.c
@@ -29,16 +29,11 @@ static void SRXAFSCB_TellMeAboutYourself(struct work_struct *);
 
 static int afs_deliver_yfs_cb_callback(struct afs_call *);
 
-#define CM_NAME(name) \
-	char afs_SRXCB##name##_name[] __tracepoint_string =	\
-		"CB." #name
-
 /*
  * CB.CallBack operation type
  */
-static CM_NAME(CallBack);
 static const struct afs_call_type afs_SRXCBCallBack = {
-	.name		= afs_SRXCBCallBack_name,
+	.name		= "CB.CallBack",
 	.deliver	= afs_deliver_cb_callback,
 	.destructor	= afs_cm_destructor,
 	.work		= SRXAFSCB_CallBack,
@@ -47,9 +42,8 @@ static const struct afs_call_type afs_SRXCBCallBack = {
 /*
  * CB.InitCallBackState operation type
  */
-static CM_NAME(InitCallBackState);
 static const struct afs_call_type afs_SRXCBInitCallBackState = {
-	.name		= afs_SRXCBInitCallBackState_name,
+	.name		= "CB.InitCallBackState",
 	.deliver	= afs_deliver_cb_init_call_back_state,
 	.destructor	= afs_cm_destructor,
 	.work		= SRXAFSCB_InitCallBackState,
@@ -58,9 +52,8 @@ static const struct afs_call_type afs_SRXCBInitCallBackState = {
 /*
  * CB.InitCallBackState3 operation type
  */
-static CM_NAME(InitCallBackState3);
 static const struct afs_call_type afs_SRXCBInitCallBackState3 = {
-	.name		= afs_SRXCBInitCallBackState3_name,
+	.name		= "CB.InitCallBackState3",
 	.deliver	= afs_deliver_cb_init_call_back_state3,
 	.destructor	= afs_cm_destructor,
 	.work		= SRXAFSCB_InitCallBackState,
@@ -69,9 +62,8 @@ static const struct afs_call_type afs_SRXCBInitCallBackState3 = {
 /*
  * CB.Probe operation type
  */
-static CM_NAME(Probe);
 static const struct afs_call_type afs_SRXCBProbe = {
-	.name		= afs_SRXCBProbe_name,
+	.name		= "CB.Probe",
 	.deliver	= afs_deliver_cb_probe,
 	.destructor	= afs_cm_destructor,
 	.work		= SRXAFSCB_Probe,
@@ -80,9 +72,8 @@ static const struct afs_call_type afs_SRXCBProbe = {
 /*
  * CB.ProbeUuid operation type
  */
-static CM_NAME(ProbeUuid);
 static const struct afs_call_type afs_SRXCBProbeUuid = {
-	.name		= afs_SRXCBProbeUuid_name,
+	.name		= "CB.ProbeUuid",
 	.deliver	= afs_deliver_cb_probe_uuid,
 	.destructor	= afs_cm_destructor,
 	.work		= SRXAFSCB_ProbeUuid,
@@ -91,9 +82,8 @@ static const struct afs_call_type afs_SRXCBProbeUuid = {
 /*
  * CB.TellMeAboutYourself operation type
  */
-static CM_NAME(TellMeAboutYourself);
 static const struct afs_call_type afs_SRXCBTellMeAboutYourself = {
-	.name		= afs_SRXCBTellMeAboutYourself_name,
+	.name		= "CB.TellMeAboutYourself",
 	.deliver	= afs_deliver_cb_tell_me_about_yourself,
 	.destructor	= afs_cm_destructor,
 	.work		= SRXAFSCB_TellMeAboutYourself,
@@ -102,9 +92,8 @@ static const struct afs_call_type afs_SRXCBTellMeAboutYourself = {
 /*
  * YFS CB.CallBack operation type
  */
-static CM_NAME(YFS_CallBack);
 static const struct afs_call_type afs_SRXYFSCB_CallBack = {
-	.name		= afs_SRXCBYFS_CallBack_name,
+	.name		= "YFSCB.CallBack",
 	.deliver	= afs_deliver_yfs_cb_callback,
 	.destructor	= afs_cm_destructor,
 	.work		= SRXAFSCB_CallBack,
diff --git a/include/trace/events/afs.h b/include/trace/events/afs.h
index c612cabbc378..61af4af87119 100644
--- a/include/trace/events/afs.h
+++ b/include/trace/events/afs.h
@@ -111,6 +111,34 @@ enum afs_vl_operation {
 	afs_VL_GetCapabilities	= 65537,	/* AFS Get VL server capabilities */
 };
 
+enum afs_cm_operation {
+	afs_CB_CallBack			= 204,	/* AFS break callback promises */
+	afs_CB_InitCallBackState	= 205,	/* AFS initialise callback state */
+	afs_CB_Probe			= 206,	/* AFS probe client */
+	afs_CB_GetLock			= 207,	/* AFS get contents of CM lock table */
+	afs_CB_GetCE			= 208,	/* AFS get cache file description */
+	afs_CB_GetXStatsVersion		= 209,	/* AFS get version of extended statistics */
+	afs_CB_GetXStats		= 210,	/* AFS get contents of extended statistics data */
+	afs_CB_InitCallBackState3	= 213,	/* AFS initialise callback state, version 3 */
+	afs_CB_ProbeUuid		= 214,	/* AFS check the client hasn't rebooted */
+};
+
+enum yfs_cm_operation {
+	yfs_CB_Probe			= 206,	/* YFS probe client */
+	yfs_CB_GetLock			= 207,	/* YFS get contents of CM lock table */
+	yfs_CB_XStatsVersion		= 209,	/* YFS get version of extended statistics */
+	yfs_CB_GetXStats		= 210,	/* YFS get contents of extended statistics data */
+	yfs_CB_InitCallBackState3	= 213,	/* YFS initialise callback state, version 3 */
+	yfs_CB_ProbeUuid		= 214,	/* YFS check the client hasn't rebooted */
+	yfs_CB_GetServerPrefs		= 215,
+	yfs_CB_GetCellServDV		= 216,
+	yfs_CB_GetLocalCell		= 217,
+	yfs_CB_GetCacheConfig		= 218,
+	yfs_CB_GetCellByNum		= 65537,
+	yfs_CB_TellMeAboutYourself	= 65538, /* get client capabilities */
+	yfs_CB_CallBack			= 64204,
+};
+
 enum afs_edit_dir_op {
 	afs_edit_dir_create,
 	afs_edit_dir_create_error,
@@ -312,6 +340,32 @@ enum afs_cb_break_reason {
 	EM(afs_YFSVL_GetEndpoints,		"YFSVL.GetEndpoints") \
 	E_(afs_VL_GetCapabilities,		"VL.GetCapabilities")
 
+#define afs_cm_operations \
+	EM(afs_CB_CallBack,			"CB.CallBack") \
+	EM(afs_CB_InitCallBackState,		"CB.InitCallBackState") \
+	EM(afs_CB_Probe,			"CB.Probe") \
+	EM(afs_CB_GetLock,			"CB.GetLock") \
+	EM(afs_CB_GetCE,			"CB.GetCE") \
+	EM(afs_CB_GetXStatsVersion,		"CB.GetXStatsVersion") \
+	EM(afs_CB_GetXStats,			"CB.GetXStats") \
+	EM(afs_CB_InitCallBackState3,		"CB.InitCallBackState3") \
+	E_(afs_CB_ProbeUuid,			"CB.ProbeUuid")
+
+#define yfs_cm_operations \
+	EM(yfs_CB_Probe,			"YFSCB.Probe") \
+	EM(yfs_CB_GetLock,			"YFSCB.GetLock") \
+	EM(yfs_CB_XStatsVersion,		"YFSCB.XStatsVersion") \
+	EM(yfs_CB_GetXStats,			"YFSCB.GetXStats") \
+	EM(yfs_CB_InitCallBackState3,		"YFSCB.InitCallBackState3") \
+	EM(yfs_CB_ProbeUuid,			"YFSCB.ProbeUuid") \
+	EM(yfs_CB_GetServerPrefs,		"YFSCB.GetServerPrefs") \
+	EM(yfs_CB_GetCellServDV,		"YFSCB.GetCellServDV") \
+	EM(yfs_CB_GetLocalCell,			"YFSCB.GetLocalCell") \
+	EM(yfs_CB_GetCacheConfig,		"YFSCB.GetCacheConfig") \
+	EM(yfs_CB_GetCellByNum,			"YFSCB.GetCellByNum") \
+	EM(yfs_CB_TellMeAboutYourself,		"YFSCB.TellMeAboutYourself") \
+	E_(yfs_CB_CallBack,			"YFSCB.CallBack")
+
 #define afs_edit_dir_ops				  \
 	EM(afs_edit_dir_create,			"create") \
 	EM(afs_edit_dir_create_error,		"c_fail") \
@@ -442,6 +496,8 @@ afs_call_traces;
 afs_server_traces;
 afs_fs_operations;
 afs_vl_operations;
+afs_cm_operations;
+yfs_cm_operations;
 afs_edit_dir_ops;
 afs_edit_dir_reasons;
 afs_eproto_causes;
@@ -522,20 +578,21 @@ TRACE_EVENT(afs_cb_call,
 
 	    TP_STRUCT__entry(
 		    __field(unsigned int,		call		)
-		    __field(const char *,		name		)
 		    __field(u32,			op		)
+		    __field(u16,			service_id	)
 			     ),
 
 	    TP_fast_assign(
 		    __entry->call	= call->debug_id;
-		    __entry->name	= call->type->name;
 		    __entry->op		= call->operation_ID;
+		    __entry->service_id	= call->service_id;
 			   ),
 
-	    TP_printk("c=%08x %s o=%u",
+	    TP_printk("c=%08x %s",
 		      __entry->call,
-		      __entry->name,
-		      __entry->op)
+		      __entry->service_id == 2501 ?
+		      __print_symbolic(__entry->op, yfs_cm_operations) :
+		      __print_symbolic(__entry->op, afs_cm_operations))
 	    );
 
 TRACE_EVENT(afs_call,
-- 
2.30.2

[PATCH 5.4 063/108] r8169: Avoid duplicate sysfs entry creation error

[Greg Kroah-Hartman]

From: Sayanta Pattanayak <sayanta.pattanayak@arm.com>

[ Upstream commit e9a72f874d5b95cef0765bafc56005a50f72c5fe ]

When registering the MDIO bus for a r8169 device, we use the PCI
bus/device specifier as a (seemingly) unique device identifier.
However the very same BDF number can be used on another PCI segment,
which makes the driver fail probing:

[ 27.544136] r8169 0002:07:00.0: enabling device (0000 -> 0003)
[ 27.559734] sysfs: cannot create duplicate filename '/class/mdio_bus/r8169-700'
....
[ 27.684858] libphy: mii_bus r8169-700 failed to register
[ 27.695602] r8169: probe of 0002:07:00.0 failed with error -22

Add the segment number to the device name to make it more unique.

This fixes operation on ARM N1SDP boards, with two boards connected
together to form an SMP system, and all on-board devices showing up
twice, just on different PCI segments. A similar issue would occur on
large systems with many PCI slots and multiple RTL8169 NICs.

Fixes: f1e911d5d0dfd ("r8169: add basic phylib support")
Signed-off-by: Sayanta Pattanayak <sayanta.pattanayak@arm.com>
[Andre: expand commit message, use pci_domain_nr()]
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/realtek/r8169_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
index 5969f64169e5..fb51548c57e9 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -6850,7 +6850,8 @@ static int r8169_mdio_register(struct rtl8169_private *tp)
 	new_bus->priv = tp;
 	new_bus->parent = &pdev->dev;
 	new_bus->irq[0] = PHY_IGNORE_INTERRUPT;
-	snprintf(new_bus->id, MII_BUS_ID_SIZE, "r8169-%x", pci_dev_id(pdev));
+	snprintf(new_bus->id, MII_BUS_ID_SIZE, "r8169-%x-%x",
+		 pci_domain_nr(pdev->bus), pci_dev_id(pdev));
 
 	new_bus->read = r8169_mdio_read_reg;
 	new_bus->write = r8169_mdio_write_reg;
-- 
2.30.2

[PATCH 5.4 064/108] nvme: set the PRACT bit when using Write Zeroes with T10 PI

[Greg Kroah-Hartman]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit aaeb7bb061be545251606f4d9c82d710ca2a7c8e ]

When using Write Zeroes on a namespace that has protection
information enabled they behavior without the PRACT bit
counter-intuitive and will generally lead to validation failures
when reading the written blocks.  Fix this by always setting the
PRACT bit that generates matching PI data on the fly.

Fixes: 6e02318eaea5 ("nvme: add support for the Write Zeroes command")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/core.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 710ab45eb679..a5b5a2305791 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -694,7 +694,10 @@ static inline blk_status_t nvme_setup_write_zeroes(struct nvme_ns *ns,
 		cpu_to_le64(nvme_sect_to_lba(ns, blk_rq_pos(req)));
 	cmnd->write_zeroes.length =
 		cpu_to_le16((blk_rq_bytes(req) >> ns->lba_shift) - 1);
-	cmnd->write_zeroes.control = 0;
+	if (nvme_ns_has_pi(ns))
+		cmnd->write_zeroes.control = cpu_to_le16(NVME_RW_PRINFO_PRACT);
+	else
+		cmnd->write_zeroes.control = 0;
 	return BLK_STS_OK;
 }
 
-- 
2.30.2

[PATCH 5.4 065/108] sctp: update active_key for asoc when old key is being replaced

[Greg Kroah-Hartman]

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit 58acd10092268831e49de279446c314727101292 ]

syzbot reported a call trace:

  BUG: KASAN: use-after-free in sctp_auth_shkey_hold+0x22/0xa0 net/sctp/auth.c:112
  Call Trace:
   sctp_auth_shkey_hold+0x22/0xa0 net/sctp/auth.c:112
   sctp_set_owner_w net/sctp/socket.c:131 [inline]
   sctp_sendmsg_to_asoc+0x152e/0x2180 net/sctp/socket.c:1865
   sctp_sendmsg+0x103b/0x1d30 net/sctp/socket.c:2027
   inet_sendmsg+0x99/0xe0 net/ipv4/af_inet.c:821
   sock_sendmsg_nosec net/socket.c:703 [inline]
   sock_sendmsg+0xcf/0x120 net/socket.c:723

This is an use-after-free issue caused by not updating asoc->shkey after
it was replaced in the key list asoc->endpoint_shared_keys, and the old
key was freed.

This patch is to fix by also updating active_key for asoc when old key is
being replaced with a new one. Note that this issue doesn't exist in
sctp_auth_del_key_id(), as it's not allowed to delete the active_key
from the asoc.

Fixes: 1b1e0bc99474 ("sctp: add refcnt support for sh_key")
Reported-by: syzbot+b774577370208727d12b@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sctp/auth.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/sctp/auth.c b/net/sctp/auth.c
index 1d898ee4018c..7eced1e523a5 100644
--- a/net/sctp/auth.c
+++ b/net/sctp/auth.c
@@ -866,6 +866,8 @@ int sctp_auth_set_key(struct sctp_endpoint *ep,
 	if (replace) {
 		list_del_init(&shkey->key_list);
 		sctp_auth_shkey_release(shkey);
+		if (asoc && asoc->active_key_id == auth_key->sca_keynumber)
+			sctp_auth_asoc_init_active_key(asoc, GFP_KERNEL);
 	}
 	list_add(&cur_key->key_list, sh_keys);
 
-- 
2.30.2

[PATCH 5.4 066/108] net: sched: cls_api: Fix the the wrong parameter

[Greg Kroah-Hartman]

From: Yajun Deng <yajun.deng@linux.dev>

[ Upstream commit 9d85a6f44bd5585761947f40f7821c9cd78a1bbe ]

The 4th parameter in tc_chain_notify() should be flags rather than seq.
Let's change it back correctly.

Fixes: 32a4f5ecd738 ("net: sched: introduce chain object to uapi")
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sched/cls_api.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c
index 83e5a8aa2fb1..7f20fd37e01e 100644
--- a/net/sched/cls_api.c
+++ b/net/sched/cls_api.c
@@ -2866,7 +2866,7 @@ replay:
 		break;
 	case RTM_GETCHAIN:
 		err = tc_chain_notify(chain, skb, n->nlmsg_seq,
-				      n->nlmsg_seq, n->nlmsg_type, true);
+				      n->nlmsg_flags, n->nlmsg_type, true);
 		if (err < 0)
 			NL_SET_ERR_MSG(extack, "Failed to send chain notify message");
 		break;
-- 
2.30.2

[PATCH 5.4 067/108] drm/panel: raspberrypi-touchscreen: Prevent double-free

[Greg Kroah-Hartman]

From: Maxime Ripard <maxime@cerno.tech>

[ Upstream commit 7bbcb919e32d776ca8ddce08abb391ab92eef6a9 ]

The mipi_dsi_device allocated by mipi_dsi_device_register_full() is
already free'd on release.

Fixes: 2f733d6194bd ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210720134525.563936-9-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c
index 2aa89eaecf6f..bdb4d59c8127 100644
--- a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c
+++ b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c
@@ -453,7 +453,6 @@ static int rpi_touchscreen_remove(struct i2c_client *i2c)
 	drm_panel_remove(&ts->base);
 
 	mipi_dsi_device_unregister(ts->dsi);
-	kfree(ts->dsi);
 
 	return 0;
 }
-- 
2.30.2

[PATCH 5.4 068/108] proc: Avoid mixing integer types in mem_rw()

[Greg Kroah-Hartman]

From: Marcelo Henrique Cerri <marcelo.cerri@canonical.com>

[ Upstream commit d238692b4b9f2c36e35af4c6e6f6da36184aeb3e ]

Use size_t when capping the count argument received by mem_rw(). Since
count is size_t, using min_t(int, ...) can lead to a negative value
that will later be passed to access_remote_vm(), which can cause
unexpected behavior.

Since we are capping the value to at maximum PAGE_SIZE, the conversion
from size_t to int when passing it to access_remote_vm() as "len"
shouldn't be a problem.

Link: https://lkml.kernel.org/r/20210512125215.3348316-1-marcelo.cerri@canonical.com
Reviewed-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Marcelo Henrique Cerri <marcelo.cerri@canonical.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Souza Cascardo <cascardo@canonical.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/proc/base.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/proc/base.c b/fs/proc/base.c
index 75e786684a4e..90d2f62a9672 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -836,7 +836,7 @@ static ssize_t mem_rw(struct file *file, char __user *buf,
 	flags = FOLL_FORCE | (write ? FOLL_WRITE : 0);
 
 	while (count > 0) {
-		int this_len = min_t(int, count, PAGE_SIZE);
+		size_t this_len = min_t(size_t, count, PAGE_SIZE);
 
 		if (write && copy_from_user(page, buf, this_len)) {
 			copied = -EFAULT;
-- 
2.30.2

[PATCH 5.4 069/108] [PATCH] Revert "MIPS: add PMD table accounting into MIPSpmd_alloc_one"

[Greg Kroah-Hartman]

From: Huang Pei <huangpei@loongson.cn>

This reverts commit 002d8b395fa1c0679fc3c3e68873de6c1cc300a2 which is
commit ed914d48b6a1040d1039d371b56273d422c0081e upstream.

Commit b2b29d6d011944 (mm: account PMD tables like PTE tables) is
introduced between v5.9 and v5.10, so this fix (commit 002d8b395fa1)
should NOT apply to any pre-5.10 branch.

Signed-off-by: Huang Pei <huangpei@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/mips/include/asm/pgalloc.h |   10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

--- a/arch/mips/include/asm/pgalloc.h
+++ b/arch/mips/include/asm/pgalloc.h
@@ -62,15 +62,11 @@ do {							\
 
 static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
 {
-	pmd_t *pmd = NULL;
-	struct page *pg;
+	pmd_t *pmd;
 
-	pg = alloc_pages(GFP_KERNEL | __GFP_ACCOUNT, PMD_ORDER);
-	if (pg) {
-		pgtable_pmd_page_ctor(pg);
-		pmd = (pmd_t *)page_address(pg);
+	pmd = (pmd_t *) __get_free_pages(GFP_KERNEL, PMD_ORDER);
+	if (pmd)
 		pmd_init((unsigned long)pmd, (unsigned long)invalid_pte_table);
-	}
 	return pmd;
 }
 

[PATCH 5.4 070/108] s390/ftrace: fix ftrace_update_ftrace_func implementation

[Greg Kroah-Hartman]

From: Vasily Gorbik <gor@linux.ibm.com>

commit f8c2602733c953ed7a16e060640b8e96f9d94b9b upstream.

s390 enforces DYNAMIC_FTRACE if FUNCTION_TRACER is selected.
At the same time implementation of ftrace_caller is not compliant with
HAVE_DYNAMIC_FTRACE since it doesn't provide implementation of
ftrace_update_ftrace_func() and calls ftrace_trace_function() directly.

The subtle difference is that during ftrace code patching ftrace
replaces function tracer via ftrace_update_ftrace_func() and activates
it back afterwards. Unexpected direct calls to ftrace_trace_function()
during ftrace code patching leads to nullptr-dereferences when tracing
is activated for one of functions which are used during code patching.
Those function currently are:
copy_from_kernel_nofault()
copy_from_kernel_nofault_allowed()
preempt_count_sub() [with debug_defconfig]
preempt_count_add() [with debug_defconfig]

Corresponding KASAN report:
 BUG: KASAN: nullptr-dereference in function_trace_call+0x316/0x3b0
 Read of size 4 at addr 0000000000001e08 by task migration/0/15

 CPU: 0 PID: 15 Comm: migration/0 Tainted: G B 5.13.0-41423-g08316af3644d
 Hardware name: IBM 3906 M04 704 (LPAR)
 Stopper: multi_cpu_stop+0x0/0x3e0 <- stop_machine_cpuslocked+0x1e4/0x218
 Call Trace:
  [<0000000001f77caa>] show_stack+0x16a/0x1d0
  [<0000000001f8de42>] dump_stack+0x15a/0x1b0
  [<0000000001f81d56>] print_address_description.constprop.0+0x66/0x2e0
  [<000000000082b0ca>] kasan_report+0x152/0x1c0
  [<00000000004cfd8e>] function_trace_call+0x316/0x3b0
  [<0000000001fb7082>] ftrace_caller+0x7a/0x7e
  [<00000000006bb3e6>] copy_from_kernel_nofault_allowed+0x6/0x10
  [<00000000006bb42e>] copy_from_kernel_nofault+0x3e/0xd0
  [<000000000014605c>] ftrace_make_call+0xb4/0x1f8
  [<000000000047a1b4>] ftrace_replace_code+0x134/0x1d8
  [<000000000047a6e0>] ftrace_modify_all_code+0x120/0x1d0
  [<000000000047a7ec>] __ftrace_modify_code+0x5c/0x78
  [<000000000042395c>] multi_cpu_stop+0x224/0x3e0
  [<0000000000423212>] cpu_stopper_thread+0x33a/0x5a0
  [<0000000000243ff2>] smpboot_thread_fn+0x302/0x708
  [<00000000002329ea>] kthread+0x342/0x408
  [<00000000001066b2>] __ret_from_fork+0x92/0xf0
  [<0000000001fb57fa>] ret_from_fork+0xa/0x30

 The buggy address belongs to the page:
 page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1
 flags: 0x1ffff00000001000(reserved|node=0|zone=0|lastcpupid=0x1ffff)
 raw: 1ffff00000001000 0000040000000048 0000040000000048 0000000000000000
 raw: 0000000000000000 0000000000000000 ffffffff00000001 0000000000000000
 page dumped because: kasan: bad access detected

 Memory state around the buggy address:
  0000000000001d00: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7
  0000000000001d80: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7
 >0000000000001e00: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7
                       ^
  0000000000001e80: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7
  0000000000001f00: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7
 ==================================================================

To fix that introduce ftrace_func callback to be called from
ftrace_caller and update it in ftrace_update_ftrace_func().

Fixes: 4cc9bed034d1 ("[S390] cleanup ftrace backend functions")
Cc: stable@vger.kernel.org
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/s390/include/asm/ftrace.h |    1 +
 arch/s390/kernel/ftrace.c      |    2 ++
 arch/s390/kernel/mcount.S      |    4 ++--
 3 files changed, 5 insertions(+), 2 deletions(-)

--- a/arch/s390/include/asm/ftrace.h
+++ b/arch/s390/include/asm/ftrace.h
@@ -27,6 +27,7 @@ void ftrace_caller(void);
 
 extern char ftrace_graph_caller_end;
 extern unsigned long ftrace_plt;
+extern void *ftrace_func;
 
 struct dyn_arch_ftrace { };
 
--- a/arch/s390/kernel/ftrace.c
+++ b/arch/s390/kernel/ftrace.c
@@ -57,6 +57,7 @@
  * >	brasl	%r0,ftrace_caller	# offset 0
  */
 
+void *ftrace_func __read_mostly = ftrace_stub;
 unsigned long ftrace_plt;
 
 static inline void ftrace_generate_orig_insn(struct ftrace_insn *insn)
@@ -166,6 +167,7 @@ int ftrace_make_call(struct dyn_ftrace *
 
 int ftrace_update_ftrace_func(ftrace_func_t func)
 {
+	ftrace_func = func;
 	return 0;
 }
 
--- a/arch/s390/kernel/mcount.S
+++ b/arch/s390/kernel/mcount.S
@@ -61,13 +61,13 @@ ENTRY(ftrace_caller)
 #ifdef CONFIG_HAVE_MARCH_Z196_FEATURES
 	aghik	%r2,%r0,-MCOUNT_INSN_SIZE
 	lgrl	%r4,function_trace_op
-	lgrl	%r1,ftrace_trace_function
+	lgrl	%r1,ftrace_func
 #else
 	lgr	%r2,%r0
 	aghi	%r2,-MCOUNT_INSN_SIZE
 	larl	%r4,function_trace_op
 	lg	%r4,0(%r4)
-	larl	%r1,ftrace_trace_function
+	larl	%r1,ftrace_func
 	lg	%r1,0(%r1)
 #endif
 	lgr	%r3,%r14

[PATCH 5.4 071/108] s390/boot: fix use of expolines in the DMA code

[Greg Kroah-Hartman]

From: Alexander Egorenkov <egorenar@linux.ibm.com>

commit 463f36c76fa4ec015c640ff63ccf52e7527abee0 upstream.

The DMA code section of the decompressor must be compiled with expolines
if Spectre V2 mitigation has been enabled for the decompressed kernel.
This is required because although the decompressor's image contains
the DMA code section, it is handed over to the decompressed kernel for use.

Because the DMA code is already slow w/o expolines, use expolines always
regardless whether the decompressed kernel is using them or not. This
simplifies the DMA code by dropping the conditional compilation of
expolines.

Fixes: bf72630130c2 ("s390: use proper expoline sections for .dma code")
Cc: <stable@vger.kernel.org> # 5.2
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/s390/boot/text_dma.S |   19 ++++---------------
 1 file changed, 4 insertions(+), 15 deletions(-)

--- a/arch/s390/boot/text_dma.S
+++ b/arch/s390/boot/text_dma.S
@@ -9,16 +9,6 @@
 #include <asm/errno.h>
 #include <asm/sigp.h>
 
-#ifdef CC_USING_EXPOLINE
-	.pushsection .dma.text.__s390_indirect_jump_r14,"axG"
-__dma__s390_indirect_jump_r14:
-	larl	%r1,0f
-	ex	0,0(%r1)
-	j	.
-0:	br	%r14
-	.popsection
-#endif
-
 	.section .dma.text,"ax"
 /*
  * Simplified version of expoline thunk. The normal thunks can not be used here,
@@ -27,11 +17,10 @@ __dma__s390_indirect_jump_r14:
  * affects a few functions that are not performance-relevant.
  */
 	.macro BR_EX_DMA_r14
-#ifdef CC_USING_EXPOLINE
-	jg	__dma__s390_indirect_jump_r14
-#else
-	br	%r14
-#endif
+	larl	%r1,0f
+	ex	0,0(%r1)
+	j	.
+0:	br	%r14
 	.endm
 
 /*

[PATCH 5.4 072/108] ALSA: usb-audio: Add missing proc text entry for BESPOKEN type

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 64752a95b702817602d72f109ceaf5ec0780e283 upstream.

Recently we've added a new usb_mixer element type, USB_MIXER_BESPOKEN,
but it wasn't added in the table in snd_usb_mixer_dump_cval().  This
is no big problem since each bespoken type should have its own dump
method, but it still isn't disallowed to use the standard one, so we
should cover it as well.  Along with it, define the table with the
explicit array initializer for avoiding other pitfalls.

Fixes: 785b6f29a795 ("ALSA: usb-audio: scarlett2: Fix wrong resume call")
Reported-by: Pavel Machek <pavel@denx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210714084836.1977-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/mixer.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -3242,7 +3242,15 @@ static void snd_usb_mixer_dump_cval(stru
 {
 	struct usb_mixer_elem_info *cval = mixer_elem_list_to_info(list);
 	static const char * const val_types[] = {
-		"BOOLEAN", "INV_BOOLEAN", "S8", "U8", "S16", "U16", "S32", "U32",
+		[USB_MIXER_BOOLEAN] = "BOOLEAN",
+		[USB_MIXER_INV_BOOLEAN] = "INV_BOOLEAN",
+		[USB_MIXER_S8] = "S8",
+		[USB_MIXER_U8] = "U8",
+		[USB_MIXER_S16] = "S16",
+		[USB_MIXER_U16] = "U16",
+		[USB_MIXER_S32] = "S32",
+		[USB_MIXER_U32] = "U32",
+		[USB_MIXER_BESPOKEN] = "BESPOKEN",
 	};
 	snd_iprintf(buffer, "    Info: id=%i, control=%i, cmask=0x%x, "
 			    "channels=%i, type=\"%s\"\n", cval->head.id,

[PATCH 5.4 073/108] ALSA: usb-audio: Add registration quirk for JBL Quantum headsets

[Greg Kroah-Hartman]

From: Alexander Tsoy <alexander@tsoy.me>

commit b0084afde27fe8a504377dee65f55bc6aa776937 upstream.

These devices has two interfaces, but only the second interface
contains the capture endpoint, thus quirk is required to delay the
registration until the second interface appears.

Tested-by: Jakub Fišer <jakub@ufiseru.cz>
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210721235605.53741-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/quirks.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1840,6 +1840,9 @@ static const struct registration_quirk r
 	REG_QUIRK_ENTRY(0x0951, 0x16d8, 2),	/* Kingston HyperX AMP */
 	REG_QUIRK_ENTRY(0x0951, 0x16ed, 2),	/* Kingston HyperX Cloud Alpha S */
 	REG_QUIRK_ENTRY(0x0951, 0x16ea, 2),	/* Kingston HyperX Cloud Flight S */
+	REG_QUIRK_ENTRY(0x0ecb, 0x1f46, 2),	/* JBL Quantum 600 */
+	REG_QUIRK_ENTRY(0x0ecb, 0x2039, 2),	/* JBL Quantum 400 */
+	REG_QUIRK_ENTRY(0x0ecb, 0x203e, 2),	/* JBL Quantum 800 */
 	{ 0 }					/* terminator */
 };
 

[PATCH 5.4 074/108] ALSA: sb: Fix potential ABBA deadlock in CSP driver

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 1c2b9519159b470ef24b2638f4794e86e2952ab7 upstream.

SB16 CSP driver may hit potentially a typical ABBA deadlock in two
code paths:

 In snd_sb_csp_stop():
     spin_lock_irqsave(&p->chip->mixer_lock, flags);
     spin_lock(&p->chip->reg_lock);

 In snd_sb_csp_load():
     spin_lock_irqsave(&p->chip->reg_lock, flags);
     spin_lock(&p->chip->mixer_lock);

Also the similar pattern is seen in snd_sb_csp_start().

Although the practical impact is very small (those states aren't
triggered in the same running state and this happens only on a real
hardware, decades old ISA sound boards -- which must be very difficult
to find nowadays), it's a real scenario and has to be fixed.

This patch addresses those deadlocks by splitting the locks in
snd_sb_csp_start() and snd_sb_csp_stop() for avoiding the nested
locks.

Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/7b0fcdaf-cd4f-4728-2eae-48c151a92e10@gmail.com
Link: https://lore.kernel.org/r/20210716132723.13216-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/isa/sb/sb16_csp.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/sound/isa/sb/sb16_csp.c
+++ b/sound/isa/sb/sb16_csp.c
@@ -814,6 +814,7 @@ static int snd_sb_csp_start(struct snd_s
 	mixR = snd_sbmixer_read(p->chip, SB_DSP4_PCM_DEV + 1);
 	snd_sbmixer_write(p->chip, SB_DSP4_PCM_DEV, mixL & 0x7);
 	snd_sbmixer_write(p->chip, SB_DSP4_PCM_DEV + 1, mixR & 0x7);
+	spin_unlock_irqrestore(&p->chip->mixer_lock, flags);
 
 	spin_lock(&p->chip->reg_lock);
 	set_mode_register(p->chip, 0xc0);	/* c0 = STOP */
@@ -853,6 +854,7 @@ static int snd_sb_csp_start(struct snd_s
 	spin_unlock(&p->chip->reg_lock);
 
 	/* restore PCM volume */
+	spin_lock_irqsave(&p->chip->mixer_lock, flags);
 	snd_sbmixer_write(p->chip, SB_DSP4_PCM_DEV, mixL);
 	snd_sbmixer_write(p->chip, SB_DSP4_PCM_DEV + 1, mixR);
 	spin_unlock_irqrestore(&p->chip->mixer_lock, flags);
@@ -878,6 +880,7 @@ static int snd_sb_csp_stop(struct snd_sb
 	mixR = snd_sbmixer_read(p->chip, SB_DSP4_PCM_DEV + 1);
 	snd_sbmixer_write(p->chip, SB_DSP4_PCM_DEV, mixL & 0x7);
 	snd_sbmixer_write(p->chip, SB_DSP4_PCM_DEV + 1, mixR & 0x7);
+	spin_unlock_irqrestore(&p->chip->mixer_lock, flags);
 
 	spin_lock(&p->chip->reg_lock);
 	if (p->running & SNDRV_SB_CSP_ST_QSOUND) {
@@ -892,6 +895,7 @@ static int snd_sb_csp_stop(struct snd_sb
 	spin_unlock(&p->chip->reg_lock);
 
 	/* restore PCM volume */
+	spin_lock_irqsave(&p->chip->mixer_lock, flags);
 	snd_sbmixer_write(p->chip, SB_DSP4_PCM_DEV, mixL);
 	snd_sbmixer_write(p->chip, SB_DSP4_PCM_DEV + 1, mixR);
 	spin_unlock_irqrestore(&p->chip->mixer_lock, flags);

[PATCH 5.4 075/108] ALSA: hdmi: Expose all pins on MSI MS-7C94 board

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 33f735f137c6539e3ceceb515cd1e2a644005b49 upstream.

The BIOS on MSI Mortar B550m WiFi (MS-7C94) board with AMDGPU seems
disabling the other pins than HDMI although it has more outputs
including DP.

This patch adds the board to the allow list for enabling all pins.

Reported-by: Damjan Georgievski <gdamjan@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAEk1YH4Jd0a8vfZxORVu7qg+Zsc-K+pR187ezNq8QhJBPW4gpw@mail.gmail.com
Link: https://lore.kernel.org/r/20210716135600.24176-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_hdmi.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -1820,6 +1820,7 @@ static int hdmi_add_cvt(struct hda_codec
 static const struct snd_pci_quirk force_connect_list[] = {
 	SND_PCI_QUIRK(0x103c, 0x870f, "HP", 1),
 	SND_PCI_QUIRK(0x103c, 0x871a, "HP", 1),
+	SND_PCI_QUIRK(0x1462, 0xec94, "MS-7C94", 1),
 	{}
 };
 

[PATCH 5.4 076/108] xhci: Fix lost USB 2 remote wake

[Greg Kroah-Hartman]

From: Mathias Nyman <mathias.nyman@linux.intel.com>

commit 72f68bf5c756f5ce1139b31daae2684501383ad5 upstream.

There's a small window where a USB 2 remote wake may be left unhandled
due to a race between hub thread and xhci port event interrupt handler.

When the resume event is detected in the xhci interrupt handler it kicks
the hub timer, which should move the port from resume to U0 once resume
has been signalled for long enough.

To keep the hub "thread" running we set a bus_state->resuming_ports flag.
This flag makes sure hub timer function kicks itself.

checking this flag was not properly protected by the spinlock. Flag was
copied to a local variable before lock was taken. The local variable was
then checked later with spinlock held.

If interrupt is handled right after copying the flag to the local variable
we end up stopping the hub thread before it can handle the USB 2 resume.

CPU0					CPU1
(hub thread)				(xhci event handler)

xhci_hub_status_data()
status = bus_state->resuming_ports;
					<Interrupt>
					handle_port_status()
					spin_lock()
					bus_state->resuming_ports = 1
					set_flag(HCD_FLAG_POLL_RH)
					spin_unlock()
spin_lock()
if (!status)
  clear_flag(HCD_FLAG_POLL_RH)
spin_unlock()

Fix this by taking the lock a bit earlier so that it covers
the resuming_ports flag copy in the hub thread

Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210715150651.1996099-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/xhci-hub.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1546,11 +1546,12 @@ int xhci_hub_status_data(struct usb_hcd
 	 * Inform the usbcore about resume-in-progress by returning
 	 * a non-zero value even if there are no status changes.
 	 */
+	spin_lock_irqsave(&xhci->lock, flags);
+
 	status = bus_state->resuming_ports;
 
 	mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC | PORT_WRC | PORT_CEC;
 
-	spin_lock_irqsave(&xhci->lock, flags);
 	/* For each port, did anything change?  If so, set that bit in buf. */
 	for (i = 0; i < max_ports; i++) {
 		temp = readl(ports[i]->addr);

[PATCH 5.4 077/108] KVM: PPC: Book3S: Fix H_RTAS rets buffer overflow

[Greg Kroah-Hartman]

From: Nicholas Piggin <npiggin@gmail.com>

commit f62f3c20647ebd5fb6ecb8f0b477b9281c44c10a upstream.

The kvmppc_rtas_hcall() sets the host rtas_args.rets pointer based on
the rtas_args.nargs that was provided by the guest. That guest nargs
value is not range checked, so the guest can cause the host rets pointer
to be pointed outside the args array. The individual rtas function
handlers check the nargs and nrets values to ensure they are correct,
but if they are not, the handlers store a -3 (0xfffffffd) failure
indication in rets[0] which corrupts host memory.

Fix this by testing up front whether the guest supplied nargs and nret
would exceed the array size, and fail the hcall directly without storing
a failure indication to rets[0].

Also expand on a comment about why we kill the guest and try not to
return errors directly if we have a valid rets[0] pointer.

Fixes: 8e591cb72047 ("KVM: PPC: Book3S: Add infrastructure to implement kernel-side RTAS calls")
Cc: stable@vger.kernel.org # v3.10+
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/kvm/book3s_rtas.c |   25 ++++++++++++++++++++++---
 1 file changed, 22 insertions(+), 3 deletions(-)

--- a/arch/powerpc/kvm/book3s_rtas.c
+++ b/arch/powerpc/kvm/book3s_rtas.c
@@ -240,6 +240,17 @@ int kvmppc_rtas_hcall(struct kvm_vcpu *v
 	 * value so we can restore it on the way out.
 	 */
 	orig_rets = args.rets;
+	if (be32_to_cpu(args.nargs) >= ARRAY_SIZE(args.args)) {
+		/*
+		 * Don't overflow our args array: ensure there is room for
+		 * at least rets[0] (even if the call specifies 0 nret).
+		 *
+		 * Each handler must then check for the correct nargs and nret
+		 * values, but they may always return failure in rets[0].
+		 */
+		rc = -EINVAL;
+		goto fail;
+	}
 	args.rets = &args.args[be32_to_cpu(args.nargs)];
 
 	mutex_lock(&vcpu->kvm->arch.rtas_token_lock);
@@ -267,9 +278,17 @@ int kvmppc_rtas_hcall(struct kvm_vcpu *v
 fail:
 	/*
 	 * We only get here if the guest has called RTAS with a bogus
-	 * args pointer. That means we can't get to the args, and so we
-	 * can't fail the RTAS call. So fail right out to userspace,
-	 * which should kill the guest.
+	 * args pointer or nargs/nret values that would overflow the
+	 * array. That means we can't get to the args, and so we can't
+	 * fail the RTAS call. So fail right out to userspace, which
+	 * should kill the guest.
+	 *
+	 * SLOF should actually pass the hcall return value from the
+	 * rtas handler call in r3, so enter_rtas could be modified to
+	 * return a failure indication in r3 and we could return such
+	 * errors to the guest rather than failing to host userspace.
+	 * However old guests that don't test for failure could then
+	 * continue silently after errors, so for now we won't do this.
 	 */
 	return rc;
 }

[PATCH 5.4 078/108] KVM: PPC: Book3S HV Nested: Sanitise H_ENTER_NESTED TM state

[Greg Kroah-Hartman]

From: Nicholas Piggin <npiggin@gmail.com>

commit d9c57d3ed52a92536f5fa59dc5ccdd58b4875076 upstream.

The H_ENTER_NESTED hypercall is handled by the L0, and it is a request
by the L1 to switch the context of the vCPU over to that of its L2
guest, and return with an interrupt indication. The L1 is responsible
for switching some registers to guest context, and the L0 switches
others (including all the hypervisor privileged state).

If the L2 MSR has TM active, then the L1 is responsible for
recheckpointing the L2 TM state. Then the L1 exits to L0 via the
H_ENTER_NESTED hcall, and the L0 saves the TM state as part of the exit,
and then it recheckpoints the TM state as part of the nested entry and
finally HRFIDs into the L2 with TM active MSR. Not efficient, but about
the simplest approach for something that's horrendously complicated.

Problems arise if the L1 exits to the L0 with a TM state which does not
match the L2 TM state being requested. For example if the L1 is
transactional but the L2 MSR is non-transactional, or vice versa. The
L0's HRFID can take a TM Bad Thing interrupt and crash.

Fix this by disallowing H_ENTER_NESTED in TM[T] state entirely, and then
ensuring that if the L1 is suspended then the L2 must have TM active,
and if the L1 is not suspended then the L2 must not have TM active.

Fixes: 360cae313702 ("KVM: PPC: Book3S HV: Nested guest entry via hypercall")
Cc: stable@vger.kernel.org # v4.20+
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/kvm/book3s_hv_nested.c |   20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

--- a/arch/powerpc/kvm/book3s_hv_nested.c
+++ b/arch/powerpc/kvm/book3s_hv_nested.c
@@ -232,6 +232,9 @@ long kvmhv_enter_nested_guest(struct kvm
 	if (vcpu->kvm->arch.l1_ptcr == 0)
 		return H_NOT_AVAILABLE;
 
+	if (MSR_TM_TRANSACTIONAL(vcpu->arch.shregs.msr))
+		return H_BAD_MODE;
+
 	/* copy parameters in */
 	hv_ptr = kvmppc_get_gpr(vcpu, 4);
 	err = kvm_vcpu_read_guest(vcpu, hv_ptr, &l2_hv,
@@ -253,6 +256,23 @@ long kvmhv_enter_nested_guest(struct kvm
 	if (l2_hv.vcpu_token >= NR_CPUS)
 		return H_PARAMETER;
 
+	/*
+	 * L1 must have set up a suspended state to enter the L2 in a
+	 * transactional state, and only in that case. These have to be
+	 * filtered out here to prevent causing a TM Bad Thing in the
+	 * host HRFID. We could synthesize a TM Bad Thing back to the L1
+	 * here but there doesn't seem like much point.
+	 */
+	if (MSR_TM_SUSPENDED(vcpu->arch.shregs.msr)) {
+		if (!MSR_TM_ACTIVE(l2_regs.msr))
+			return H_BAD_MODE;
+	} else {
+		if (l2_regs.msr & MSR_TS_MASK)
+			return H_BAD_MODE;
+		if (WARN_ON_ONCE(vcpu->arch.shregs.msr & MSR_TS_MASK))
+			return H_BAD_MODE;
+	}
+
 	/* translate lpid */
 	l2 = kvmhv_get_nested(vcpu->kvm, l2_hv.lpid, true);
 	if (!l2)

[PATCH 5.4 079/108] usb: hub: Disable USB 3 device initiated lpm if exit latency is too high

[Greg Kroah-Hartman]

From: Mathias Nyman <mathias.nyman@linux.intel.com>

commit 1b7f56fbc7a1b66967b6114d1b5f5a257c3abae6 upstream.

The device initiated link power management U1/U2 states should not be
enabled in case the system exit latency plus one bus interval (125us) is
greater than the shortest service interval of any periodic endpoint.

This is the case for both U1 and U2 sytstem exit latencies and link states.

See USB 3.2 section 9.4.9 "Set Feature" for more details

Note, before this patch the host and device initiated U1/U2 lpm states
were both enabled with lpm. After this patch it's possible to end up with
only host inititated U1/U2 lpm in case the exit latencies won't allow
device initiated lpm.

If this case we still want to set the udev->usb3_lpm_ux_enabled flag so
that sysfs users can see the link may go to U1/U2.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210715150122.1995966-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/core/hub.c |   68 ++++++++++++++++++++++++++++++++++++++++---------
 1 file changed, 56 insertions(+), 12 deletions(-)

--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -4023,6 +4023,47 @@ static int usb_set_lpm_timeout(struct us
 }
 
 /*
+ * Don't allow device intiated U1/U2 if the system exit latency + one bus
+ * interval is greater than the minimum service interval of any active
+ * periodic endpoint. See USB 3.2 section 9.4.9
+ */
+static bool usb_device_may_initiate_lpm(struct usb_device *udev,
+					enum usb3_link_state state)
+{
+	unsigned int sel;		/* us */
+	int i, j;
+
+	if (state == USB3_LPM_U1)
+		sel = DIV_ROUND_UP(udev->u1_params.sel, 1000);
+	else if (state == USB3_LPM_U2)
+		sel = DIV_ROUND_UP(udev->u2_params.sel, 1000);
+	else
+		return false;
+
+	for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
+		struct usb_interface *intf;
+		struct usb_endpoint_descriptor *desc;
+		unsigned int interval;
+
+		intf = udev->actconfig->interface[i];
+		if (!intf)
+			continue;
+
+		for (j = 0; j < intf->cur_altsetting->desc.bNumEndpoints; j++) {
+			desc = &intf->cur_altsetting->endpoint[j].desc;
+
+			if (usb_endpoint_xfer_int(desc) ||
+			    usb_endpoint_xfer_isoc(desc)) {
+				interval = (1 << (desc->bInterval - 1)) * 125;
+				if (sel + 125 > interval)
+					return false;
+			}
+		}
+	}
+	return true;
+}
+
+/*
  * Enable the hub-initiated U1/U2 idle timeouts, and enable device-initiated
  * U1/U2 entry.
  *
@@ -4094,20 +4135,23 @@ static void usb_enable_link_state(struct
 	 * U1/U2_ENABLE
 	 */
 	if (udev->actconfig &&
-	    usb_set_device_initiated_lpm(udev, state, true) == 0) {
-		if (state == USB3_LPM_U1)
-			udev->usb3_lpm_u1_enabled = 1;
-		else if (state == USB3_LPM_U2)
-			udev->usb3_lpm_u2_enabled = 1;
-	} else {
-		/* Don't request U1/U2 entry if the device
-		 * cannot transition to U1/U2.
-		 */
-		usb_set_lpm_timeout(udev, state, 0);
-		hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state);
+	    usb_device_may_initiate_lpm(udev, state)) {
+		if (usb_set_device_initiated_lpm(udev, state, true)) {
+			/*
+			 * Request to enable device initiated U1/U2 failed,
+			 * better to turn off lpm in this case.
+			 */
+			usb_set_lpm_timeout(udev, state, 0);
+			hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state);
+			return;
+		}
 	}
-}
 
+	if (state == USB3_LPM_U1)
+		udev->usb3_lpm_u1_enabled = 1;
+	else if (state == USB3_LPM_U2)
+		udev->usb3_lpm_u2_enabled = 1;
+}
 /*
  * Disable the hub-initiated U1/U2 idle timeouts, and disable device-initiated
  * U1/U2 entry.

[PATCH 5.4 080/108] usb: hub: Fix link power management max exit latency (MEL) calculations

[Greg Kroah-Hartman]

From: Mathias Nyman <mathias.nyman@linux.intel.com>

commit 1bf2761c837571a66ec290fb66c90413821ffda2 upstream.

Maximum Exit Latency (MEL) value is used by host to know how much in
advance it needs to start waking up a U1/U2 suspended link in order to
service a periodic transfer in time.

Current MEL calculation only includes the time to wake up the path from
U1/U2 to U0. This is called tMEL1 in USB 3.1 section C 1.5.2

Total MEL = tMEL1 + tMEL2 +tMEL3 + tMEL4 which should additinally include:
- tMEL2 which is the time it takes for PING message to reach device
- tMEL3 time for device to process the PING and submit a PING_RESPONSE
- tMEL4 time for PING_RESPONSE to traverse back upstream to host.

Add the missing tMEL2, tMEL3 and tMEL4 to MEL calculation.

Cc: <stable@kernel.org> # v3.5
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210715150122.1995966-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/core/hub.c |   52 ++++++++++++++++++++++++++-----------------------
 1 file changed, 28 insertions(+), 24 deletions(-)

--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -46,6 +46,7 @@
 
 #define USB_TP_TRANSMISSION_DELAY	40	/* ns */
 #define USB_TP_TRANSMISSION_DELAY_MAX	65535	/* ns */
+#define USB_PING_RESPONSE_TIME		400	/* ns */
 
 /* Protect struct usb_device->state and ->children members
  * Note: Both are also protected by ->dev.sem, except that ->state can
@@ -180,8 +181,9 @@ int usb_device_supports_lpm(struct usb_d
 }
 
 /*
- * Set the Maximum Exit Latency (MEL) for the host to initiate a transition from
- * either U1 or U2.
+ * Set the Maximum Exit Latency (MEL) for the host to wakup up the path from
+ * U1/U2, send a PING to the device and receive a PING_RESPONSE.
+ * See USB 3.1 section C.1.5.2
  */
 static void usb_set_lpm_mel(struct usb_device *udev,
 		struct usb3_lpm_parameters *udev_lpm_params,
@@ -191,35 +193,37 @@ static void usb_set_lpm_mel(struct usb_d
 		unsigned int hub_exit_latency)
 {
 	unsigned int total_mel;
-	unsigned int device_mel;
-	unsigned int hub_mel;
 
 	/*
-	 * Calculate the time it takes to transition all links from the roothub
-	 * to the parent hub into U0.  The parent hub must then decode the
-	 * packet (hub header decode latency) to figure out which port it was
-	 * bound for.
-	 *
-	 * The Hub Header decode latency is expressed in 0.1us intervals (0x1
-	 * means 0.1us).  Multiply that by 100 to get nanoseconds.
+	 * tMEL1. time to transition path from host to device into U0.
+	 * MEL for parent already contains the delay up to parent, so only add
+	 * the exit latency for the last link (pick the slower exit latency),
+	 * and the hub header decode latency. See USB 3.1 section C 2.2.1
+	 * Store MEL in nanoseconds
 	 */
 	total_mel = hub_lpm_params->mel +
-		(hub->descriptor->u.ss.bHubHdrDecLat * 100);
+		max(udev_exit_latency, hub_exit_latency) * 1000 +
+		hub->descriptor->u.ss.bHubHdrDecLat * 100;
 
 	/*
-	 * How long will it take to transition the downstream hub's port into
-	 * U0?  The greater of either the hub exit latency or the device exit
-	 * latency.
-	 *
-	 * The BOS U1/U2 exit latencies are expressed in 1us intervals.
-	 * Multiply that by 1000 to get nanoseconds.
+	 * tMEL2. Time to submit PING packet. Sum of tTPTransmissionDelay for
+	 * each link + wHubDelay for each hub. Add only for last link.
+	 * tMEL4, the time for PING_RESPONSE to traverse upstream is similar.
+	 * Multiply by 2 to include it as well.
 	 */
-	device_mel = udev_exit_latency * 1000;
-	hub_mel = hub_exit_latency * 1000;
-	if (device_mel > hub_mel)
-		total_mel += device_mel;
-	else
-		total_mel += hub_mel;
+	total_mel += (__le16_to_cpu(hub->descriptor->u.ss.wHubDelay) +
+		      USB_TP_TRANSMISSION_DELAY) * 2;
+
+	/*
+	 * tMEL3, tPingResponse. Time taken by device to generate PING_RESPONSE
+	 * after receiving PING. Also add 2100ns as stated in USB 3.1 C 1.5.2.4
+	 * to cover the delay if the PING_RESPONSE is queued behind a Max Packet
+	 * Size DP.
+	 * Note these delays should be added only once for the entire path, so
+	 * add them to the MEL of the device connected to the roothub.
+	 */
+	if (!hub->hdev->parent)
+		total_mel += USB_PING_RESPONSE_TIME + 2100;
 
 	udev_lpm_params->mel = total_mel;
 }

[PATCH 5.4 081/108] USB: usb-storage: Add LaCie Rugged USB3-FW to IGNORE_UAS

[Greg Kroah-Hartman]

From: Julian Sikorski <belegdol@gmail.com>

commit 6abf2fe6b4bf6e5256b80c5817908151d2d33e9f upstream.

LaCie Rugged USB3-FW appears to be incompatible with UAS. It generates
errors like:
[ 1151.582598] sd 14:0:0:0: tag#16 uas_eh_abort_handler 0 uas-tag 1 inflight: IN
[ 1151.582602] sd 14:0:0:0: tag#16 CDB: Report supported operation codes a3 0c 01 12 00 00 00 00 02 00 00 00
[ 1151.588594] scsi host14: uas_eh_device_reset_handler start
[ 1151.710482] usb 2-4: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 1151.741398] scsi host14: uas_eh_device_reset_handler success
[ 1181.785534] scsi host14: uas_eh_device_reset_handler start

Signed-off-by: Julian Sikorski <belegdol+github@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210720171910.36497-1-belegdol+github@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/storage/unusual_uas.h |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -45,6 +45,13 @@ UNUSUAL_DEV(0x059f, 0x105f, 0x0000, 0x99
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NO_REPORT_OPCODES | US_FL_NO_SAME),
 
+/* Reported-by: Julian Sikorski <belegdol@gmail.com> */
+UNUSUAL_DEV(0x059f, 0x1061, 0x0000, 0x9999,
+		"LaCie",
+		"Rugged USB3-FW",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_UAS),
+
 /*
  * Apricorn USB3 dongle sometimes returns "USBSUSBSUSBS" in response to SCSI
  * commands in UAS mode.  Observed with the 1.28 firmware; are there others?

[PATCH 5.4 082/108] usb: max-3421: Prevent corruption of freed memory

[Greg Kroah-Hartman]

From: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>

commit b5fdf5c6e6bee35837e160c00ac89327bdad031b upstream.

The MAX-3421 USB driver remembers the state of the USB toggles for a
device/endpoint. To save SPI writes, this was only done when a new
device/endpoint was being used. Unfortunately, if the old device was
removed, this would cause writes to freed memory.

To fix this, a simpler scheme is used. The toggles are read from
hardware when a URB is completed, and the toggles are always written to
hardware when any URB transaction is started. This will cause a few more
SPI transactions, but no causes kernel panics.

Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20210625031456.8632-1-mark.tomlinson@alliedtelesis.co.nz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/max3421-hcd.c |   44 +++++++++++++----------------------------
 1 file changed, 14 insertions(+), 30 deletions(-)

--- a/drivers/usb/host/max3421-hcd.c
+++ b/drivers/usb/host/max3421-hcd.c
@@ -153,8 +153,6 @@ struct max3421_hcd {
 	 */
 	struct urb *curr_urb;
 	enum scheduling_pass sched_pass;
-	struct usb_device *loaded_dev;	/* dev that's loaded into the chip */
-	int loaded_epnum;		/* epnum whose toggles are loaded */
 	int urb_done;			/* > 0 -> no errors, < 0: errno */
 	size_t curr_len;
 	u8 hien;
@@ -492,39 +490,17 @@ max3421_set_speed(struct usb_hcd *hcd, s
  * Caller must NOT hold HCD spinlock.
  */
 static void
-max3421_set_address(struct usb_hcd *hcd, struct usb_device *dev, int epnum,
-		    int force_toggles)
+max3421_set_address(struct usb_hcd *hcd, struct usb_device *dev, int epnum)
 {
-	struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
-	int old_epnum, same_ep, rcvtog, sndtog;
-	struct usb_device *old_dev;
+	int rcvtog, sndtog;
 	u8 hctl;
 
-	old_dev = max3421_hcd->loaded_dev;
-	old_epnum = max3421_hcd->loaded_epnum;
-
-	same_ep = (dev == old_dev && epnum == old_epnum);
-	if (same_ep && !force_toggles)
-		return;
-
-	if (old_dev && !same_ep) {
-		/* save the old end-points toggles: */
-		u8 hrsl = spi_rd8(hcd, MAX3421_REG_HRSL);
-
-		rcvtog = (hrsl >> MAX3421_HRSL_RCVTOGRD_BIT) & 1;
-		sndtog = (hrsl >> MAX3421_HRSL_SNDTOGRD_BIT) & 1;
-
-		/* no locking: HCD (i.e., we) own toggles, don't we? */
-		usb_settoggle(old_dev, old_epnum, 0, rcvtog);
-		usb_settoggle(old_dev, old_epnum, 1, sndtog);
-	}
 	/* setup new endpoint's toggle bits: */
 	rcvtog = usb_gettoggle(dev, epnum, 0);
 	sndtog = usb_gettoggle(dev, epnum, 1);
 	hctl = (BIT(rcvtog + MAX3421_HCTL_RCVTOG0_BIT) |
 		BIT(sndtog + MAX3421_HCTL_SNDTOG0_BIT));
 
-	max3421_hcd->loaded_epnum = epnum;
 	spi_wr8(hcd, MAX3421_REG_HCTL, hctl);
 
 	/*
@@ -532,7 +508,6 @@ max3421_set_address(struct usb_hcd *hcd,
 	 * address-assignment so it's best to just always load the
 	 * address whenever the end-point changed/was forced.
 	 */
-	max3421_hcd->loaded_dev = dev;
 	spi_wr8(hcd, MAX3421_REG_PERADDR, dev->devnum);
 }
 
@@ -667,7 +642,7 @@ max3421_select_and_start_urb(struct usb_
 	struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
 	struct urb *urb, *curr_urb = NULL;
 	struct max3421_ep *max3421_ep;
-	int epnum, force_toggles = 0;
+	int epnum;
 	struct usb_host_endpoint *ep;
 	struct list_head *pos;
 	unsigned long flags;
@@ -777,7 +752,6 @@ done:
 			usb_settoggle(urb->dev, epnum, 0, 1);
 			usb_settoggle(urb->dev, epnum, 1, 1);
 			max3421_ep->pkt_state = PKT_STATE_SETUP;
-			force_toggles = 1;
 		} else
 			max3421_ep->pkt_state = PKT_STATE_TRANSFER;
 	}
@@ -785,7 +759,7 @@ done:
 	spin_unlock_irqrestore(&max3421_hcd->lock, flags);
 
 	max3421_ep->last_active = max3421_hcd->frame_number;
-	max3421_set_address(hcd, urb->dev, epnum, force_toggles);
+	max3421_set_address(hcd, urb->dev, epnum);
 	max3421_set_speed(hcd, urb->dev);
 	max3421_next_transfer(hcd, 0);
 	return 1;
@@ -1380,6 +1354,16 @@ max3421_urb_done(struct usb_hcd *hcd)
 		status = 0;
 	urb = max3421_hcd->curr_urb;
 	if (urb) {
+		/* save the old end-points toggles: */
+		u8 hrsl = spi_rd8(hcd, MAX3421_REG_HRSL);
+		int rcvtog = (hrsl >> MAX3421_HRSL_RCVTOGRD_BIT) & 1;
+		int sndtog = (hrsl >> MAX3421_HRSL_SNDTOGRD_BIT) & 1;
+		int epnum = usb_endpoint_num(&urb->ep->desc);
+
+		/* no locking: HCD (i.e., we) own toggles, don't we? */
+		usb_settoggle(urb->dev, epnum, 0, rcvtog);
+		usb_settoggle(urb->dev, epnum, 1, sndtog);
+
 		max3421_hcd->curr_urb = NULL;
 		spin_lock_irqsave(&max3421_hcd->lock, flags);
 		usb_hcd_unlink_urb_from_ep(hcd, urb);

[PATCH 5.4 083/108] usb: renesas_usbhs: Fix superfluous irqs happen after usb_pkt_pop()

[Greg Kroah-Hartman]

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

commit 5719df243e118fb343725e8b2afb1637e1af1373 upstream.

This driver has a potential issue which this driver is possible to
cause superfluous irqs after usb_pkt_pop() is called. So, after
the commit 3af32605289e ("usb: renesas_usbhs: fix error return
code of usbhsf_pkt_handler()") had been applied, we could observe
the following error happened when we used g_audio.

    renesas_usbhs e6590000.usb: irq_ready run_error 1 : -22

To fix the issue, disable the tx or rx interrupt in usb_pkt_pop().

Fixes: 2743e7f90dc0 ("usb: renesas_usbhs: fix the usb_pkt_pop()")
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210624122039.596528-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/renesas_usbhs/fifo.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/usb/renesas_usbhs/fifo.c
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -101,6 +101,8 @@ static struct dma_chan *usbhsf_dma_chan_
 #define usbhsf_dma_map(p)	__usbhsf_dma_map_ctrl(p, 1)
 #define usbhsf_dma_unmap(p)	__usbhsf_dma_map_ctrl(p, 0)
 static int __usbhsf_dma_map_ctrl(struct usbhs_pkt *pkt, int map);
+static void usbhsf_tx_irq_ctrl(struct usbhs_pipe *pipe, int enable);
+static void usbhsf_rx_irq_ctrl(struct usbhs_pipe *pipe, int enable);
 struct usbhs_pkt *usbhs_pkt_pop(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt)
 {
 	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
@@ -123,6 +125,11 @@ struct usbhs_pkt *usbhs_pkt_pop(struct u
 		if (chan) {
 			dmaengine_terminate_all(chan);
 			usbhsf_dma_unmap(pkt);
+		} else {
+			if (usbhs_pipe_is_dir_in(pipe))
+				usbhsf_rx_irq_ctrl(pipe, 0);
+			else
+				usbhsf_tx_irq_ctrl(pipe, 0);
 		}
 
 		usbhs_pipe_clear_without_sequence(pipe, 0, 0);

[PATCH 5.4 084/108] USB: serial: option: add support for u-blox LARA-R6 family

[Greg Kroah-Hartman]

From: Marco De Marco <marco.demarco@posteo.net>

commit 94b619a07655805a1622484967754f5848640456 upstream.

The patch is meant to support LARA-R6 Cat 1 module family.

Module USB ID:
Vendor  ID: 0x05c6
Product ID: 0x90fA

Interface layout:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: QMI wwan (not available in all versions)

Signed-off-by: Marco De Marco <marco.demarco@posteo.net>
Link: https://lore.kernel.org/r/49260184.kfMIbaSn9k@mars
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -238,6 +238,7 @@ static void option_instat_callback(struc
 #define QUECTEL_PRODUCT_UC15			0x9090
 /* These u-blox products use Qualcomm's vendor ID */
 #define UBLOX_PRODUCT_R410M			0x90b2
+#define UBLOX_PRODUCT_R6XX			0x90fa
 /* These Yuga products use Qualcomm's vendor ID */
 #define YUGA_PRODUCT_CLM920_NC5			0x9625
 
@@ -1101,6 +1102,8 @@ static const struct usb_device_id option
 	/* u-blox products using Qualcomm vendor ID */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, UBLOX_PRODUCT_R410M),
 	  .driver_info = RSVD(1) | RSVD(3) },
+	{ USB_DEVICE(QUALCOMM_VENDOR_ID, UBLOX_PRODUCT_R6XX),
+	  .driver_info = RSVD(3) },
 	/* Quectel products using Quectel vendor ID */
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21, 0xff, 0xff, 0xff),
 	  .driver_info = NUMEP2 },

[PATCH 5.4 085/108] USB: serial: cp210x: fix comments for GE CS1000

[Greg Kroah-Hartman]

From: Ian Ray <ian.ray@ge.com>

commit e9db418d4b828dd049caaf5ed65dc86f93bb1a0c upstream.

Fix comments for GE CS1000 CP210x USB ID assignments.

Fixes: 42213a0190b5 ("USB: serial: cp210x: add some more GE USB IDs")
Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/cp210x.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -203,8 +203,8 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x1901, 0x0194) },	/* GE Healthcare Remote Alarm Box */
 	{ USB_DEVICE(0x1901, 0x0195) },	/* GE B850/B650/B450 CP2104 DP UART interface */
 	{ USB_DEVICE(0x1901, 0x0196) },	/* GE B850 CP2105 DP UART interface */
-	{ USB_DEVICE(0x1901, 0x0197) }, /* GE CS1000 Display serial interface */
-	{ USB_DEVICE(0x1901, 0x0198) }, /* GE CS1000 M.2 Key E serial interface */
+	{ USB_DEVICE(0x1901, 0x0197) }, /* GE CS1000 M.2 Key E serial interface */
+	{ USB_DEVICE(0x1901, 0x0198) }, /* GE CS1000 Display serial interface */
 	{ USB_DEVICE(0x199B, 0xBA30) }, /* LORD WSDA-200-USB */
 	{ USB_DEVICE(0x19CF, 0x3000) }, /* Parrot NMEA GPS Flight Recorder */
 	{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */

[PATCH 5.4 086/108] USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick

[Greg Kroah-Hartman]

From: John Keeping <john@metanate.com>

commit d6a206e60124a9759dd7f6dfb86b0e1d3b1df82e upstream.

Add the USB serial device ID for the CEL ZigBee EM3588 radio stick.

Signed-off-by: John Keeping <john@metanate.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/cp210x.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -156,6 +156,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x10C4, 0x89A4) }, /* CESINEL FTBC Flexible Thyristor Bridge Controller */
 	{ USB_DEVICE(0x10C4, 0x89FB) }, /* Qivicon ZigBee USB Radio Stick */
 	{ USB_DEVICE(0x10C4, 0x8A2A) }, /* HubZ dual ZigBee and Z-Wave dongle */
+	{ USB_DEVICE(0x10C4, 0x8A5B) }, /* CEL EM3588 ZigBee USB Stick */
 	{ USB_DEVICE(0x10C4, 0x8A5E) }, /* CEL EM3588 ZigBee USB Stick Long Range */
 	{ USB_DEVICE(0x10C4, 0x8B34) }, /* Qivicon ZigBee USB Radio Stick */
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */

[PATCH 5.4 087/108] usb: dwc2: gadget: Fix sending zero length packet in DDMA mode.

[Greg Kroah-Hartman]

From: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>

commit d53dc38857f6dbefabd9eecfcbf67b6eac9a1ef4 upstream.

Sending zero length packet in DDMA mode perform by DMA descriptor
by setting SP (short packet) flag.

For DDMA in function dwc2_hsotg_complete_in() does not need to send
zlp.

Tested by USBCV MSC tests.

Fixes: f71b5e2533de ("usb: dwc2: gadget: fix zero length packet transfers")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/967bad78c55dd2db1c19714eee3d0a17cf99d74a.1626777738.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc2/gadget.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -2748,12 +2748,14 @@ static void dwc2_hsotg_complete_in(struc
 		return;
 	}
 
-	/* Zlp for all endpoints, for ep0 only in DATA IN stage */
+	/* Zlp for all endpoints in non DDMA, for ep0 only in DATA IN stage */
 	if (hs_ep->send_zlp) {
-		dwc2_hsotg_program_zlp(hsotg, hs_ep);
 		hs_ep->send_zlp = 0;
-		/* transfer will be completed on next complete interrupt */
-		return;
+		if (!using_desc_dma(hsotg)) {
+			dwc2_hsotg_program_zlp(hsotg, hs_ep);
+			/* transfer will be completed on next complete interrupt */
+			return;
+		}
 	}
 
 	if (hs_ep->index == 0 && hsotg->ep0_state == DWC2_EP0_DATA_IN) {

[PATCH 5.4 088/108] firmware/efi: Tell memblock about EFI iomem reservations

[Greg Kroah-Hartman]

From: Marc Zyngier <maz@kernel.org>

commit 2bab693a608bdf614b9fcd44083c5100f34b9f77 upstream.

kexec_load_file() relies on the memblock infrastructure to avoid
stamping over regions of memory that are essential to the survival
of the system.

However, nobody seems to agree how to flag these regions as reserved,
and (for example) EFI only publishes its reservations in /proc/iomem
for the benefit of the traditional, userspace based kexec tool.

On arm64 platforms with GICv3, this can result in the payload being
placed at the location of the LPI tables. Shock, horror!

Let's augment the EFI reservation code with a memblock_reserve() call,
protecting our dear tables from the secondary kernel invasion.

Reported-by: Moritz Fischer <mdf@kernel.org>
Tested-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/firmware/efi/efi.c |   13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

--- a/drivers/firmware/efi/efi.c
+++ b/drivers/firmware/efi/efi.c
@@ -975,6 +975,7 @@ static int __init efi_memreserve_map_roo
 static int efi_mem_reserve_iomem(phys_addr_t addr, u64 size)
 {
 	struct resource *res, *parent;
+	int ret;
 
 	res = kzalloc(sizeof(struct resource), GFP_ATOMIC);
 	if (!res)
@@ -987,7 +988,17 @@ static int efi_mem_reserve_iomem(phys_ad
 
 	/* we expect a conflict with a 'System RAM' region */
 	parent = request_resource_conflict(&iomem_resource, res);
-	return parent ? request_resource(parent, res) : 0;
+	ret = parent ? request_resource(parent, res) : 0;
+
+	/*
+	 * Given that efi_mem_reserve_iomem() can be called at any
+	 * time, only call memblock_reserve() if the architecture
+	 * keeps the infrastructure around.
+	 */
+	if (IS_ENABLED(CONFIG_ARCH_KEEP_MEMBLOCK) && !ret)
+		memblock_reserve(addr, size);
+
+	return ret;
 }
 
 int __ref efi_mem_reserve_persistent(phys_addr_t addr, u64 size)

[PATCH 5.4 089/108] tracing/histogram: Rename "cpu" to "common_cpu"

[Greg Kroah-Hartman]

From: Steven Rostedt (VMware) <rostedt@goodmis.org>

commit 1e3bac71c5053c99d438771fc9fa5082ae5d90aa upstream.

Currently the histogram logic allows the user to write "cpu" in as an
event field, and it will record the CPU that the event happened on.

The problem with this is that there's a lot of events that have "cpu"
as a real field, and using "cpu" as the CPU it ran on, makes it
impossible to run histograms on the "cpu" field of events.

For example, if I want to have a histogram on the count of the
workqueue_queue_work event on its cpu field, running:

 ># echo 'hist:keys=cpu' > events/workqueue/workqueue_queue_work/trigger

Gives a misleading and wrong result.

Change the command to "common_cpu" as no event should have "common_*"
fields as that's a reserved name for fields used by all events. And
this makes sense here as common_cpu would be a field used by all events.

Now we can even do:

 ># echo 'hist:keys=common_cpu,cpu if cpu < 100' > events/workqueue/workqueue_queue_work/trigger
 ># cat events/workqueue/workqueue_queue_work/hist
 # event histogram
 #
 # trigger info: hist:keys=common_cpu,cpu:vals=hitcount:sort=hitcount:size=2048 if cpu < 100 [active]
 #

 { common_cpu:          0, cpu:          2 } hitcount:          1
 { common_cpu:          0, cpu:          4 } hitcount:          1
 { common_cpu:          7, cpu:          7 } hitcount:          1
 { common_cpu:          0, cpu:          7 } hitcount:          1
 { common_cpu:          0, cpu:          1 } hitcount:          1
 { common_cpu:          0, cpu:          6 } hitcount:          2
 { common_cpu:          0, cpu:          5 } hitcount:          2
 { common_cpu:          1, cpu:          1 } hitcount:          4
 { common_cpu:          6, cpu:          6 } hitcount:          4
 { common_cpu:          5, cpu:          5 } hitcount:         14
 { common_cpu:          4, cpu:          4 } hitcount:         26
 { common_cpu:          0, cpu:          0 } hitcount:         39
 { common_cpu:          2, cpu:          2 } hitcount:        184

Now for backward compatibility, I added a trick. If "cpu" is used, and
the field is not found, it will fall back to "common_cpu" and work as
it did before. This way, it will still work for old programs that use
"cpu" to get the actual CPU, but if the event has a "cpu" as a field, it
will get that event's "cpu" field, which is probably what it wants
anyway.

I updated the tracefs/README to include documentation about both the
common_timestamp and the common_cpu. This way, if that text is present in
the README, then an application can know that common_cpu is supported over
just plain "cpu".

Link: https://lkml.kernel.org/r/20210721110053.26b4f641@oasis.local.home

Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Fixes: 8b7622bf94a44 ("tracing: Add cpu field for hist triggers")
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/trace/histogram.rst |    2 +-
 kernel/trace/trace.c              |    4 ++++
 kernel/trace/trace_events_hist.c  |   22 ++++++++++++++++------
 3 files changed, 21 insertions(+), 7 deletions(-)

--- a/Documentation/trace/histogram.rst
+++ b/Documentation/trace/histogram.rst
@@ -191,7 +191,7 @@ Documentation written by Tom Zanussi
                                 with the event, in nanoseconds.  May be
 			        modified by .usecs to have timestamps
 			        interpreted as microseconds.
-    cpu                    int  the cpu on which the event occurred.
+    common_cpu             int  the cpu on which the event occurred.
     ====================== ==== =======================================
 
 Extended error information
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -4975,6 +4975,10 @@ static const char readme_msg[] =
 	"\t            [:name=histname1]\n"
 	"\t            [:<handler>.<action>]\n"
 	"\t            [if <filter>]\n\n"
+	"\t    Note, special fields can be used as well:\n"
+	"\t            common_timestamp - to record current timestamp\n"
+	"\t            common_cpu - to record the CPU the event happened on\n"
+	"\n"
 	"\t    When a matching event is hit, an entry is added to a hash\n"
 	"\t    table using the key(s) and value(s) named, and the value of a\n"
 	"\t    sum called 'hitcount' is incremented.  Keys and values\n"
--- a/kernel/trace/trace_events_hist.c
+++ b/kernel/trace/trace_events_hist.c
@@ -2001,7 +2001,7 @@ static const char *hist_field_name(struc
 		 field->flags & HIST_FIELD_FL_ALIAS)
 		field_name = hist_field_name(field->operands[0], ++level);
 	else if (field->flags & HIST_FIELD_FL_CPU)
-		field_name = "cpu";
+		field_name = "common_cpu";
 	else if (field->flags & HIST_FIELD_FL_EXPR ||
 		 field->flags & HIST_FIELD_FL_VAR_REF) {
 		if (field->system) {
@@ -2873,14 +2873,24 @@ parse_field(struct hist_trigger_data *hi
 		hist_data->enable_timestamps = true;
 		if (*flags & HIST_FIELD_FL_TIMESTAMP_USECS)
 			hist_data->attrs->ts_in_usecs = true;
-	} else if (strcmp(field_name, "cpu") == 0)
+	} else if (strcmp(field_name, "common_cpu") == 0)
 		*flags |= HIST_FIELD_FL_CPU;
 	else {
 		field = trace_find_event_field(file->event_call, field_name);
 		if (!field || !field->size) {
-			hist_err(tr, HIST_ERR_FIELD_NOT_FOUND, errpos(field_name));
-			field = ERR_PTR(-EINVAL);
-			goto out;
+			/*
+			 * For backward compatibility, if field_name
+			 * was "cpu", then we treat this the same as
+			 * common_cpu.
+			 */
+			if (strcmp(field_name, "cpu") == 0) {
+				*flags |= HIST_FIELD_FL_CPU;
+			} else {
+				hist_err(tr, HIST_ERR_FIELD_NOT_FOUND,
+					 errpos(field_name));
+				field = ERR_PTR(-EINVAL);
+				goto out;
+			}
 		}
 	}
  out:
@@ -5641,7 +5651,7 @@ static void hist_field_print(struct seq_
 		seq_printf(m, "%s=", hist_field->var.name);
 
 	if (hist_field->flags & HIST_FIELD_FL_CPU)
-		seq_puts(m, "cpu");
+		seq_puts(m, "common_cpu");
 	else if (field_name) {
 		if (hist_field->flags & HIST_FIELD_FL_VAR_REF ||
 		    hist_field->flags & HIST_FIELD_FL_ALIAS)

[PATCH 5.4 090/108] tracing: Fix bug in rb_per_cpu_empty() that might cause deadloop.

[Greg Kroah-Hartman]

From: Haoran Luo <www@aegistudio.net>

commit 67f0d6d9883c13174669f88adac4f0ee656cc16a upstream.

The "rb_per_cpu_empty()" misinterpret the condition (as not-empty) when
"head_page" and "commit_page" of "struct ring_buffer_per_cpu" points to
the same buffer page, whose "buffer_data_page" is empty and "read" field
is non-zero.

An error scenario could be constructed as followed (kernel perspective):

1. All pages in the buffer has been accessed by reader(s) so that all of
them will have non-zero "read" field.

2. Read and clear all buffer pages so that "rb_num_of_entries()" will
return 0 rendering there's no more data to read. It is also required
that the "read_page", "commit_page" and "tail_page" points to the same
page, while "head_page" is the next page of them.

3. Invoke "ring_buffer_lock_reserve()" with large enough "length"
so that it shot pass the end of current tail buffer page. Now the
"head_page", "commit_page" and "tail_page" points to the same page.

4. Discard current event with "ring_buffer_discard_commit()", so that
"head_page", "commit_page" and "tail_page" points to a page whose buffer
data page is now empty.

When the error scenario has been constructed, "tracing_read_pipe" will
be trapped inside a deadloop: "trace_empty()" returns 0 since
"rb_per_cpu_empty()" returns 0 when it hits the CPU containing such
constructed ring buffer. Then "trace_find_next_entry_inc()" always
return NULL since "rb_num_of_entries()" reports there's no more entry
to read. Finally "trace_seq_to_user()" returns "-EBUSY" spanking
"tracing_read_pipe" back to the start of the "waitagain" loop.

I've also written a proof-of-concept script to construct the scenario
and trigger the bug automatically, you can use it to trace and validate
my reasoning above:

  https://github.com/aegistudio/RingBufferDetonator.git

Tests has been carried out on linux kernel 5.14-rc2
(2734d6c1b1a089fb593ef6a23d4b70903526fe0c), my fixed version
of kernel (for testing whether my update fixes the bug) and
some older kernels (for range of affected kernels). Test result is
also attached to the proof-of-concept repository.

Link: https://lore.kernel.org/linux-trace-devel/YPaNxsIlb2yjSi5Y@aegistudio/
Link: https://lore.kernel.org/linux-trace-devel/YPgrN85WL9VyrZ55@aegistudio

Cc: stable@vger.kernel.org
Fixes: bf41a158cacba ("ring-buffer: make reentrant")
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Haoran Luo <www@aegistudio.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/trace/ring_buffer.c |   28 ++++++++++++++++++++++++----
 1 file changed, 24 insertions(+), 4 deletions(-)

--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -3221,10 +3221,30 @@ static bool rb_per_cpu_empty(struct ring
 	if (unlikely(!head))
 		return true;
 
-	return reader->read == rb_page_commit(reader) &&
-		(commit == reader ||
-		 (commit == head &&
-		  head->read == rb_page_commit(commit)));
+	/* Reader should exhaust content in reader page */
+	if (reader->read != rb_page_commit(reader))
+		return false;
+
+	/*
+	 * If writers are committing on the reader page, knowing all
+	 * committed content has been read, the ring buffer is empty.
+	 */
+	if (commit == reader)
+		return true;
+
+	/*
+	 * If writers are committing on a page other than reader page
+	 * and head page, there should always be content to read.
+	 */
+	if (commit != head)
+		return false;
+
+	/*
+	 * Writers are committing on the head page, we just need
+	 * to care about there're committed data, and the reader will
+	 * swap reader page with head page when it is to read data.
+	 */
+	return rb_page_commit(commit) == 0;
 }
 
 /**

[PATCH 5.4 091/108] btrfs: check for missing device in btrfs_trim_fs

[Greg Kroah-Hartman]

From: Anand Jain <anand.jain@oracle.com>

commit 16a200f66ede3f9afa2e51d90ade017aaa18d213 upstream.

A fstrim on a degraded raid1 can trigger the following null pointer
dereference:

  BTRFS info (device loop0): allowing degraded mounts
  BTRFS info (device loop0): disk space caching is enabled
  BTRFS info (device loop0): has skinny extents
  BTRFS warning (device loop0): devid 2 uuid 97ac16f7-e14d-4db1-95bc-3d489b424adb is missing
  BTRFS warning (device loop0): devid 2 uuid 97ac16f7-e14d-4db1-95bc-3d489b424adb is missing
  BTRFS info (device loop0): enabling ssd optimizations
  BUG: kernel NULL pointer dereference, address: 0000000000000620
  PGD 0 P4D 0
  Oops: 0000 [#1] SMP NOPTI
  CPU: 0 PID: 4574 Comm: fstrim Not tainted 5.13.0-rc7+ #31
  Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
  RIP: 0010:btrfs_trim_fs+0x199/0x4a0 [btrfs]
  RSP: 0018:ffff959541797d28 EFLAGS: 00010293
  RAX: 0000000000000000 RBX: ffff946f84eca508 RCX: a7a67937adff8608
  RDX: ffff946e8122d000 RSI: 0000000000000000 RDI: ffffffffc02fdbf0
  RBP: ffff946ea4615000 R08: 0000000000000001 R09: 0000000000000000
  R10: 0000000000000000 R11: ffff946e8122d960 R12: 0000000000000000
  R13: ffff959541797db8 R14: ffff946e8122d000 R15: ffff959541797db8
  FS:  00007f55917a5080(0000) GS:ffff946f9bc00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000620 CR3: 000000002d2c8001 CR4: 00000000000706f0
  Call Trace:
  btrfs_ioctl_fitrim+0x167/0x260 [btrfs]
  btrfs_ioctl+0x1c00/0x2fe0 [btrfs]
  ? selinux_file_ioctl+0x140/0x240
  ? syscall_trace_enter.constprop.0+0x188/0x240
  ? __x64_sys_ioctl+0x83/0xb0
  __x64_sys_ioctl+0x83/0xb0

Reproducer:

  $ mkfs.btrfs -fq -d raid1 -m raid1 /dev/loop0 /dev/loop1
  $ mount /dev/loop0 /btrfs
  $ umount /btrfs
  $ btrfs dev scan --forget
  $ mount -o degraded /dev/loop0 /btrfs

  $ fstrim /btrfs

The reason is we call btrfs_trim_free_extents() for the missing device,
which uses device->bdev (NULL for missing device) to find if the device
supports discard.

Fix is to check if the device is missing before calling
btrfs_trim_free_extents().

CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/extent-tree.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -5768,6 +5768,9 @@ int btrfs_trim_fs(struct btrfs_fs_info *
 	mutex_lock(&fs_info->fs_devices->device_list_mutex);
 	devices = &fs_info->fs_devices->devices;
 	list_for_each_entry(device, devices, dev_list) {
+		if (test_bit(BTRFS_DEV_STATE_MISSING, &device->dev_state))
+			continue;
+
 		ret = btrfs_trim_free_extents(device, &group_trimmed);
 		if (ret) {
 			dev_failed++;

[PATCH 5.4 092/108] media: ngene: Fix out-of-bounds bug in ngene_command_config_free_buf()

[Greg Kroah-Hartman]

From: Gustavo A. R. Silva <gustavoars@kernel.org>

commit 8d4abca95ecc82fc8c41912fa0085281f19cc29f upstream.

Fix an 11-year old bug in ngene_command_config_free_buf() while
addressing the following warnings caught with -Warray-bounds:

arch/alpha/include/asm/string.h:22:16: warning: '__builtin_memcpy' offset [12, 16] from the object at 'com' is out of the bounds of referenced subobject 'config' with type 'unsigned char' at offset 10 [-Warray-bounds]
arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [12, 16] from the object at 'com' is out of the bounds of referenced subobject 'config' with type 'unsigned char' at offset 10 [-Warray-bounds]

The problem is that the original code is trying to copy 6 bytes of
data into a one-byte size member _config_ of the wrong structue
FW_CONFIGURE_BUFFERS, in a single call to memcpy(). This causes a
legitimate compiler warning because memcpy() overruns the length
of &com.cmd.ConfigureBuffers.config. It seems that the right
structure is FW_CONFIGURE_FREE_BUFFERS, instead, because it contains
6 more members apart from the header _hdr_. Also, the name of
the function ngene_command_config_free_buf() suggests that the actual
intention is to ConfigureFreeBuffers, instead of ConfigureBuffers
(which takes place in the function ngene_command_config_buf(), above).

Fix this by enclosing those 6 members of struct FW_CONFIGURE_FREE_BUFFERS
into new struct config, and use &com.cmd.ConfigureFreeBuffers.config as
the destination address, instead of &com.cmd.ConfigureBuffers.config,
when calling memcpy().

This also helps with the ongoing efforts to globally enable
-Warray-bounds and get us closer to being able to tighten the
FORTIFY_SOURCE routines on memcpy().

Link: https://github.com/KSPP/linux/issues/109
Fixes: dae52d009fc9 ("V4L/DVB: ngene: Initial check-in")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/linux-hardening/20210420001631.GA45456@embeddedor/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/pci/ngene/ngene-core.c |    2 +-
 drivers/media/pci/ngene/ngene.h      |   14 ++++++++------
 2 files changed, 9 insertions(+), 7 deletions(-)

--- a/drivers/media/pci/ngene/ngene-core.c
+++ b/drivers/media/pci/ngene/ngene-core.c
@@ -385,7 +385,7 @@ static int ngene_command_config_free_buf
 
 	com.cmd.hdr.Opcode = CMD_CONFIGURE_FREE_BUFFER;
 	com.cmd.hdr.Length = 6;
-	memcpy(&com.cmd.ConfigureBuffers.config, config, 6);
+	memcpy(&com.cmd.ConfigureFreeBuffers.config, config, 6);
 	com.in_len = 6;
 	com.out_len = 0;
 
--- a/drivers/media/pci/ngene/ngene.h
+++ b/drivers/media/pci/ngene/ngene.h
@@ -407,12 +407,14 @@ enum _BUFFER_CONFIGS {
 
 struct FW_CONFIGURE_FREE_BUFFERS {
 	struct FW_HEADER hdr;
-	u8   UVI1_BufferLength;
-	u8   UVI2_BufferLength;
-	u8   TVO_BufferLength;
-	u8   AUD1_BufferLength;
-	u8   AUD2_BufferLength;
-	u8   TVA_BufferLength;
+	struct {
+		u8   UVI1_BufferLength;
+		u8   UVI2_BufferLength;
+		u8   TVO_BufferLength;
+		u8   AUD1_BufferLength;
+		u8   AUD2_BufferLength;
+		u8   TVA_BufferLength;
+	} __packed config;
 } __attribute__ ((__packed__));
 
 struct FW_CONFIGURE_UART {

[PATCH 5.4 093/108] ixgbe: Fix packet corruption due to missing DMA sync

[Greg Kroah-Hartman]

From: Markus Boehme <markubo@amazon.com>

commit 09cfae9f13d51700b0fecf591dcd658fc5375428 upstream.

When receiving a packet with multiple fragments, hardware may still
touch the first fragment until the entire packet has been received. The
driver therefore keeps the first fragment mapped for DMA until end of
packet has been asserted, and delays its dma_sync call until then.

The driver tries to fit multiple receive buffers on one page. When using
3K receive buffers (e.g. using Jumbo frames and legacy-rx is turned
off/build_skb is being used) on an architecture with 4K pages, the
driver allocates an order 1 compound page and uses one page per receive
buffer. To determine the correct offset for a delayed DMA sync of the
first fragment of a multi-fragment packet, the driver then cannot just
use PAGE_MASK on the DMA address but has to construct a mask based on
the actual size of the backing page.

Using PAGE_MASK in the 3K RX buffer/4K page architecture configuration
will always sync the first page of a compound page. With the SWIOTLB
enabled this can lead to corrupted packets (zeroed out first fragment,
re-used garbage from another packet) and various consequences, such as
slow/stalling data transfers and connection resets. For example, testing
on a link with MTU exceeding 3058 bytes on a host with SWIOTLB enabled
(e.g. "iommu=soft swiotlb=262144,force") TCP transfers quickly fizzle
out without this patch.

Cc: stable@vger.kernel.org
Fixes: 0c5661ecc5dd7 ("ixgbe: fix crash in build_skb Rx code path")
Signed-off-by: Markus Boehme <markubo@amazon.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -1827,7 +1827,8 @@ static void ixgbe_dma_sync_frag(struct i
 				struct sk_buff *skb)
 {
 	if (ring_uses_build_skb(rx_ring)) {
-		unsigned long offset = (unsigned long)(skb->data) & ~PAGE_MASK;
+		unsigned long mask = (unsigned long)ixgbe_rx_pg_size(rx_ring) - 1;
+		unsigned long offset = (unsigned long)(skb->data) & mask;
 
 		dma_sync_single_range_for_cpu(rx_ring->dev,
 					      IXGBE_CB(skb)->dma,

[PATCH 5.4 094/108] selftest: use mmap instead of posix_memalign to allocate memory

[Greg Kroah-Hartman]

From: Peter Collingbourne <pcc@google.com>

commit 0db282ba2c12c1515d490d14a1ff696643ab0f1b upstream.

This test passes pointers obtained from anon_allocate_area to the
userfaultfd and mremap APIs.  This causes a problem if the system
allocator returns tagged pointers because with the tagged address ABI
the kernel rejects tagged addresses passed to these APIs, which would
end up causing the test to fail.  To make this test compatible with such
system allocators, stop using the system allocator to allocate memory in
anon_allocate_area, and instead just use mmap.

Link: https://lkml.kernel.org/r/20210714195437.118982-3-pcc@google.com
Link: https://linux-review.googlesource.com/id/Icac91064fcd923f77a83e8e133f8631c5b8fc241
Fixes: c47174fc362a ("userfaultfd: selftest")
Co-developed-by: Lokesh Gidra <lokeshgidra@google.com>
Signed-off-by: Lokesh Gidra <lokeshgidra@google.com>
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Alistair Delva <adelva@google.com>
Cc: William McVicker <willmcvicker@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mitch Phillips <mitchp@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: <stable@vger.kernel.org>	[5.4]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/vm/userfaultfd.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/tools/testing/selftests/vm/userfaultfd.c
+++ b/tools/testing/selftests/vm/userfaultfd.c
@@ -139,8 +139,10 @@ static int anon_release_pages(char *rel_
 
 static void anon_allocate_area(void **alloc_area)
 {
-	if (posix_memalign(alloc_area, page_size, nr_pages * page_size)) {
-		fprintf(stderr, "out of memory\n");
+	*alloc_area = mmap(NULL, nr_pages * page_size, PROT_READ | PROT_WRITE,
+			   MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
+	if (*alloc_area == MAP_FAILED)
+		fprintf(stderr, "mmap of anonymous memory failed");
 		*alloc_area = NULL;
 	}
 }

[PATCH 5.4 095/108] userfaultfd: do not untag user pointers

[Greg Kroah-Hartman]

From: Peter Collingbourne <pcc@google.com>

commit e71e2ace5721a8b921dca18b045069e7bb411277 upstream.

Patch series "userfaultfd: do not untag user pointers", v5.

If a user program uses userfaultfd on ranges of heap memory, it may end
up passing a tagged pointer to the kernel in the range.start field of
the UFFDIO_REGISTER ioctl.  This can happen when using an MTE-capable
allocator, or on Android if using the Tagged Pointers feature for MTE
readiness [1].

When a fault subsequently occurs, the tag is stripped from the fault
address returned to the application in the fault.address field of struct
uffd_msg.  However, from the application's perspective, the tagged
address *is* the memory address, so if the application is unaware of
memory tags, it may get confused by receiving an address that is, from
its point of view, outside of the bounds of the allocation.  We observed
this behavior in the kselftest for userfaultfd [2] but other
applications could have the same problem.

Address this by not untagging pointers passed to the userfaultfd ioctls.
Instead, let the system call fail.  Also change the kselftest to use
mmap so that it doesn't encounter this problem.

[1] https://source.android.com/devices/tech/debug/tagged-pointers
[2] tools/testing/selftests/vm/userfaultfd.c

This patch (of 2):

Do not untag pointers passed to the userfaultfd ioctls.  Instead, let
the system call fail.  This will provide an early indication of problems
with tag-unaware userspace code instead of letting the code get confused
later, and is consistent with how we decided to handle brk/mmap/mremap
in commit dcde237319e6 ("mm: Avoid creating virtual address aliases in
brk()/mmap()/mremap()"), as well as being consistent with the existing
tagged address ABI documentation relating to how ioctl arguments are
handled.

The code change is a revert of commit 7d0325749a6c ("userfaultfd: untag
user pointers") plus some fixups to some additional calls to
validate_range that have appeared since then.

[1] https://source.android.com/devices/tech/debug/tagged-pointers
[2] tools/testing/selftests/vm/userfaultfd.c

Link: https://lkml.kernel.org/r/20210714195437.118982-1-pcc@google.com
Link: https://lkml.kernel.org/r/20210714195437.118982-2-pcc@google.com
Link: https://linux-review.googlesource.com/id/I761aa9f0344454c482b83fcfcce547db0a25501b
Fixes: 63f0c6037965 ("arm64: Introduce prctl() options to control the tagged user addresses ABI")
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alistair Delva <adelva@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Mitch Phillips <mitchp@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: William McVicker <willmcvicker@google.com>
Cc: <stable@vger.kernel.org>	[5.4]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/arm64/tagged-address-abi.rst |   26 ++++++++++++++++++--------
 fs/userfaultfd.c                           |   22 ++++++++++------------
 2 files changed, 28 insertions(+), 20 deletions(-)

--- a/Documentation/arm64/tagged-address-abi.rst
+++ b/Documentation/arm64/tagged-address-abi.rst
@@ -45,14 +45,24 @@ how the user addresses are used by the k
 
 1. User addresses not accessed by the kernel but used for address space
    management (e.g. ``mprotect()``, ``madvise()``). The use of valid
-   tagged pointers in this context is allowed with the exception of
-   ``brk()``, ``mmap()`` and the ``new_address`` argument to
-   ``mremap()`` as these have the potential to alias with existing
-   user addresses.
-
-   NOTE: This behaviour changed in v5.6 and so some earlier kernels may
-   incorrectly accept valid tagged pointers for the ``brk()``,
-   ``mmap()`` and ``mremap()`` system calls.
+   tagged pointers in this context is allowed with these exceptions:
+
+   - ``brk()``, ``mmap()`` and the ``new_address`` argument to
+     ``mremap()`` as these have the potential to alias with existing
+      user addresses.
+
+     NOTE: This behaviour changed in v5.6 and so some earlier kernels may
+     incorrectly accept valid tagged pointers for the ``brk()``,
+     ``mmap()`` and ``mremap()`` system calls.
+
+   - The ``range.start``, ``start`` and ``dst`` arguments to the
+     ``UFFDIO_*`` ``ioctl()``s used on a file descriptor obtained from
+     ``userfaultfd()``, as fault addresses subsequently obtained by reading
+     the file descriptor will be untagged, which may otherwise confuse
+     tag-unaware programs.
+
+     NOTE: This behaviour changed in v5.14 and so some earlier kernels may
+     incorrectly accept valid tagged pointers for this system call.
 
 2. User addresses accessed by the kernel (e.g. ``write()``). This ABI
    relaxation is disabled by default and the application thread needs to
--- a/fs/userfaultfd.c
+++ b/fs/userfaultfd.c
@@ -1272,23 +1272,21 @@ static __always_inline void wake_userfau
 }
 
 static __always_inline int validate_range(struct mm_struct *mm,
-					  __u64 *start, __u64 len)
+					  __u64 start, __u64 len)
 {
 	__u64 task_size = mm->task_size;
 
-	*start = untagged_addr(*start);
-
-	if (*start & ~PAGE_MASK)
+	if (start & ~PAGE_MASK)
 		return -EINVAL;
 	if (len & ~PAGE_MASK)
 		return -EINVAL;
 	if (!len)
 		return -EINVAL;
-	if (*start < mmap_min_addr)
+	if (start < mmap_min_addr)
 		return -EINVAL;
-	if (*start >= task_size)
+	if (start >= task_size)
 		return -EINVAL;
-	if (len > task_size - *start)
+	if (len > task_size - start)
 		return -EINVAL;
 	return 0;
 }
@@ -1338,7 +1336,7 @@ static int userfaultfd_register(struct u
 		goto out;
 	}
 
-	ret = validate_range(mm, &uffdio_register.range.start,
+	ret = validate_range(mm, uffdio_register.range.start,
 			     uffdio_register.range.len);
 	if (ret)
 		goto out;
@@ -1527,7 +1525,7 @@ static int userfaultfd_unregister(struct
 	if (copy_from_user(&uffdio_unregister, buf, sizeof(uffdio_unregister)))
 		goto out;
 
-	ret = validate_range(mm, &uffdio_unregister.start,
+	ret = validate_range(mm, uffdio_unregister.start,
 			     uffdio_unregister.len);
 	if (ret)
 		goto out;
@@ -1678,7 +1676,7 @@ static int userfaultfd_wake(struct userf
 	if (copy_from_user(&uffdio_wake, buf, sizeof(uffdio_wake)))
 		goto out;
 
-	ret = validate_range(ctx->mm, &uffdio_wake.start, uffdio_wake.len);
+	ret = validate_range(ctx->mm, uffdio_wake.start, uffdio_wake.len);
 	if (ret)
 		goto out;
 
@@ -1718,7 +1716,7 @@ static int userfaultfd_copy(struct userf
 			   sizeof(uffdio_copy)-sizeof(__s64)))
 		goto out;
 
-	ret = validate_range(ctx->mm, &uffdio_copy.dst, uffdio_copy.len);
+	ret = validate_range(ctx->mm, uffdio_copy.dst, uffdio_copy.len);
 	if (ret)
 		goto out;
 	/*
@@ -1774,7 +1772,7 @@ static int userfaultfd_zeropage(struct u
 			   sizeof(uffdio_zeropage)-sizeof(__s64)))
 		goto out;
 
-	ret = validate_range(ctx->mm, &uffdio_zeropage.range.start,
+	ret = validate_range(ctx->mm, uffdio_zeropage.range.start,
 			     uffdio_zeropage.range.len);
 	if (ret)
 		goto out;

[PATCH 5.4 096/108] hugetlbfs: fix mount mode command line processing

[Greg Kroah-Hartman]

From: Mike Kravetz <mike.kravetz@oracle.com>

commit e0f7e2b2f7e7864238a4eea05cc77ae1be2bf784 upstream.

In commit 32021982a324 ("hugetlbfs: Convert to fs_context") processing
of the mount mode string was changed from match_octal() to fsparam_u32.

This changed existing behavior as match_octal does not require octal
values to have a '0' prefix, but fsparam_u32 does.

Use fsparam_u32oct which provides the same behavior as match_octal.

Link: https://lkml.kernel.org/r/20210721183326.102716-1-mike.kravetz@oracle.com
Fixes: 32021982a324 ("hugetlbfs: Convert to fs_context")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Dennis Camera <bugs+kernel.org@dtnr.ch>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/hugetlbfs/inode.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -76,7 +76,7 @@ enum hugetlb_param {
 static const struct fs_parameter_spec hugetlb_param_specs[] = {
 	fsparam_u32   ("gid",		Opt_gid),
 	fsparam_string("min_size",	Opt_min_size),
-	fsparam_u32   ("mode",		Opt_mode),
+	fsparam_u32oct("mode",		Opt_mode),
 	fsparam_string("nr_inodes",	Opt_nr_inodes),
 	fsparam_string("pagesize",	Opt_pagesize),
 	fsparam_string("size",		Opt_size),

[PATCH 5.4 097/108] rbd: dont hold lock_rwsem while running_list is being drained

[Greg Kroah-Hartman]

From: Ilya Dryomov <idryomov@gmail.com>

commit ed9eb71085ecb7ded9a5118cec2ab70667cc7350 upstream.

Currently rbd_quiesce_lock() holds lock_rwsem for read while blocking
on releasing_wait completion.  On the I/O completion side, each image
request also needs to take lock_rwsem for read.  Because rw_semaphore
implementation doesn't allow new readers after a writer has indicated
interest in the lock, this can result in a deadlock if something that
needs to take lock_rwsem for write gets involved.  For example:

1. watch error occurs
2. rbd_watch_errcb() takes lock_rwsem for write, clears owner_cid and
   releases lock_rwsem
3. after reestablishing the watch, rbd_reregister_watch() takes
   lock_rwsem for write and calls rbd_reacquire_lock()
4. rbd_quiesce_lock() downgrades lock_rwsem to for read and blocks on
   releasing_wait until running_list becomes empty
5. another watch error occurs
6. rbd_watch_errcb() blocks trying to take lock_rwsem for write
7. no in-flight image request can complete and delete itself from
   running_list because lock_rwsem won't be granted anymore

A similar scenario can occur with "lock has been acquired" and "lock
has been released" notification handers which also take lock_rwsem for
write to update owner_cid.

We don't actually get anything useful from sitting on lock_rwsem in
rbd_quiesce_lock() -- owner_cid updates certainly don't need to be
synchronized with.  In fact the whole owner_cid tracking logic could
probably be removed from the kernel client because we don't support
proxied maintenance operations.

Cc: stable@vger.kernel.org # 5.3+
URL: https://tracker.ceph.com/issues/42757
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Tested-by: Robin Geuze <robin.geuze@nl.team.blue>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/block/rbd.c |   12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -4239,8 +4239,6 @@ again:
 
 static bool rbd_quiesce_lock(struct rbd_device *rbd_dev)
 {
-	bool need_wait;
-
 	dout("%s rbd_dev %p\n", __func__, rbd_dev);
 	lockdep_assert_held_write(&rbd_dev->lock_rwsem);
 
@@ -4252,11 +4250,11 @@ static bool rbd_quiesce_lock(struct rbd_
 	 */
 	rbd_dev->lock_state = RBD_LOCK_STATE_RELEASING;
 	rbd_assert(!completion_done(&rbd_dev->releasing_wait));
-	need_wait = !list_empty(&rbd_dev->running_list);
-	downgrade_write(&rbd_dev->lock_rwsem);
-	if (need_wait)
-		wait_for_completion(&rbd_dev->releasing_wait);
-	up_read(&rbd_dev->lock_rwsem);
+	if (list_empty(&rbd_dev->running_list))
+		return true;
+
+	up_write(&rbd_dev->lock_rwsem);
+	wait_for_completion(&rbd_dev->releasing_wait);
 
 	down_write(&rbd_dev->lock_rwsem);
 	if (rbd_dev->lock_state != RBD_LOCK_STATE_RELEASING)

[PATCH 5.4 098/108] rbd: always kick acquire on "acquired" and "released" notifications

[Greg Kroah-Hartman]

From: Ilya Dryomov <idryomov@gmail.com>

commit 8798d070d416d18a75770fc19787e96705073f43 upstream.

Skipping the "lock has been released" notification if the lock owner
is not what we expect based on owner_cid can lead to I/O hangs.
One example is our own notifications: because owner_cid is cleared
in rbd_unlock(), when we get our own notification it is processed as
unexpected/duplicate and maybe_kick_acquire() isn't called.  If a peer
that requested the lock then doesn't go through with acquiring it,
I/O requests that came in while the lock was being quiesced would
be stalled until another I/O request is submitted and kicks acquire
from rbd_img_exclusive_lock().

This makes the comment in rbd_release_lock() actually true: prior to
this change the canceled work was being requeued in response to the
"lock has been acquired" notification from rbd_handle_acquired_lock().

Cc: stable@vger.kernel.org # 5.3+
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Tested-by: Robin Geuze <robin.geuze@nl.team.blue>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/block/rbd.c |   20 +++++++-------------
 1 file changed, 7 insertions(+), 13 deletions(-)

--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -4340,15 +4340,11 @@ static void rbd_handle_acquired_lock(str
 	if (!rbd_cid_equal(&cid, &rbd_empty_cid)) {
 		down_write(&rbd_dev->lock_rwsem);
 		if (rbd_cid_equal(&cid, &rbd_dev->owner_cid)) {
-			/*
-			 * we already know that the remote client is
-			 * the owner
-			 */
-			up_write(&rbd_dev->lock_rwsem);
-			return;
+			dout("%s rbd_dev %p cid %llu-%llu == owner_cid\n",
+			     __func__, rbd_dev, cid.gid, cid.handle);
+		} else {
+			rbd_set_owner_cid(rbd_dev, &cid);
 		}
-
-		rbd_set_owner_cid(rbd_dev, &cid);
 		downgrade_write(&rbd_dev->lock_rwsem);
 	} else {
 		down_read(&rbd_dev->lock_rwsem);
@@ -4373,14 +4369,12 @@ static void rbd_handle_released_lock(str
 	if (!rbd_cid_equal(&cid, &rbd_empty_cid)) {
 		down_write(&rbd_dev->lock_rwsem);
 		if (!rbd_cid_equal(&cid, &rbd_dev->owner_cid)) {
-			dout("%s rbd_dev %p unexpected owner, cid %llu-%llu != owner_cid %llu-%llu\n",
+			dout("%s rbd_dev %p cid %llu-%llu != owner_cid %llu-%llu\n",
 			     __func__, rbd_dev, cid.gid, cid.handle,
 			     rbd_dev->owner_cid.gid, rbd_dev->owner_cid.handle);
-			up_write(&rbd_dev->lock_rwsem);
-			return;
+		} else {
+			rbd_set_owner_cid(rbd_dev, &rbd_empty_cid);
 		}
-
-		rbd_set_owner_cid(rbd_dev, &rbd_empty_cid);
 		downgrade_write(&rbd_dev->lock_rwsem);
 	} else {
 		down_read(&rbd_dev->lock_rwsem);

[PATCH 5.4 099/108] nds32: fix up stack guard gap

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c453db6cd96418c79702eaf38259002755ab23ff upstream.

Commit 1be7107fbe18 ("mm: larger stack guard gap, between vmas") fixed
up all architectures to deal with the stack guard gap.  But when nds32
was added to the tree, it forgot to do the same thing.

Resolve this by properly fixing up the nsd32's version of
arch_get_unmapped_area()

Cc: Nick Hu <nickhu@andestech.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Qiang Liu <cyruscyliu@gmail.com>
Cc: stable <stable@vger.kernel.org>
Reported-by: iLifetruth <yixiaonn@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Link: https://lore.kernel.org/r/20210629104024.2293615-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/nds32/mm/mmap.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/nds32/mm/mmap.c
+++ b/arch/nds32/mm/mmap.c
@@ -59,7 +59,7 @@ arch_get_unmapped_area(struct file *filp
 
 		vma = find_vma(mm, addr);
 		if (TASK_SIZE - len >= addr &&
-		    (!vma || addr + len <= vma->vm_start))
+		    (!vma || addr + len <= vm_start_gap(vma)))
 			return addr;
 	}
 

[PATCH 5.4 100/108] drm: Return -ENOTTY for non-drm ioctls

[Greg Kroah-Hartman]

From: Charles Baylis <cb-kernel@fishzet.co.uk>

commit 3abab27c322e0f2acf981595aa8040c9164dc9fb upstream.

drm: Return -ENOTTY for non-drm ioctls

Return -ENOTTY from drm_ioctl() when userspace passes in a cmd number
which doesn't relate to the drm subsystem.

Glibc uses the TCGETS ioctl to implement isatty(), and without this
change isatty() returns it incorrectly returns true for drm devices.

To test run this command:
$ if [ -t 0 ]; then echo is a tty; fi < /dev/dri/card0
which shows "is a tty" without this patch.

This may also modify memory which the userspace application is not
expecting.

Signed-off-by: Charles Baylis <cb-kernel@fishzet.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/YPG3IBlzaMhfPqCr@stando.fishzet.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/drm_ioctl.c |    3 +++
 include/drm/drm_ioctl.h     |    1 +
 2 files changed, 4 insertions(+)

--- a/drivers/gpu/drm/drm_ioctl.c
+++ b/drivers/gpu/drm/drm_ioctl.c
@@ -826,6 +826,9 @@ long drm_ioctl(struct file *filp,
 	if (drm_dev_is_unplugged(dev))
 		return -ENODEV;
 
+       if (DRM_IOCTL_TYPE(cmd) != DRM_IOCTL_BASE)
+               return -ENOTTY;
+
 	is_driver_ioctl = nr >= DRM_COMMAND_BASE && nr < DRM_COMMAND_END;
 
 	if (is_driver_ioctl) {
--- a/include/drm/drm_ioctl.h
+++ b/include/drm/drm_ioctl.h
@@ -68,6 +68,7 @@ typedef int drm_ioctl_compat_t(struct fi
 			       unsigned long arg);
 
 #define DRM_IOCTL_NR(n)                _IOC_NR(n)
+#define DRM_IOCTL_TYPE(n)              _IOC_TYPE(n)
 #define DRM_MAJOR       226
 
 /**

[PATCH 5.4 101/108] net: dsa: mv88e6xxx: use correct .stats_set_histogram() on Topaz

[Greg Kroah-Hartman]

From: Marek Behún <kabel@kernel.org>

commit 11527f3c4725640e6c40a2b7654e303f45e82a6c upstream.

Commit 40cff8fca9e3 ("net: dsa: mv88e6xxx: Fix stats histogram mode")
introduced wrong .stats_set_histogram() method for Topaz family.

The Peridot method should be used instead.

Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: 40cff8fca9e3 ("net: dsa: mv88e6xxx: Fix stats histogram mode")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/dsa/mv88e6xxx/chip.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -3192,7 +3192,7 @@ static const struct mv88e6xxx_ops mv88e6
 	.port_set_cmode = mv88e6341_port_set_cmode,
 	.port_setup_message_port = mv88e6xxx_setup_message_port,
 	.stats_snapshot = mv88e6390_g1_stats_snapshot,
-	.stats_set_histogram = mv88e6095_g1_stats_set_histogram,
+	.stats_set_histogram = mv88e6390_g1_stats_set_histogram,
 	.stats_get_sset_count = mv88e6320_stats_get_sset_count,
 	.stats_get_strings = mv88e6320_stats_get_strings,
 	.stats_get_stats = mv88e6390_stats_get_stats,
@@ -3907,7 +3907,7 @@ static const struct mv88e6xxx_ops mv88e6
 	.port_set_cmode = mv88e6341_port_set_cmode,
 	.port_setup_message_port = mv88e6xxx_setup_message_port,
 	.stats_snapshot = mv88e6390_g1_stats_snapshot,
-	.stats_set_histogram = mv88e6095_g1_stats_set_histogram,
+	.stats_set_histogram = mv88e6390_g1_stats_set_histogram,
 	.stats_get_sset_count = mv88e6320_stats_get_sset_count,
 	.stats_get_strings = mv88e6320_stats_get_strings,
 	.stats_get_stats = mv88e6390_stats_get_stats,

[PATCH 5.4 102/108] net: bcmgenet: ensure EXT_ENERGY_DET_MASK is clear

[Greg Kroah-Hartman]

From: Doug Berger <opendmb@gmail.com>

commit 5a3c680aa2c12c90c44af383fe6882a39875ab81 upstream.

Setting the EXT_ENERGY_DET_MASK bit allows the port energy detection
logic of the internal PHY to prevent the system from sleeping. Some
internal PHYs will report that energy is detected when the network
interface is closed which can prevent the system from going to sleep
if WoL is enabled when the interface is brought down.

Since the driver does not support waking the system on this logic,
this commit clears the bit whenever the internal PHY is powered up
and the other logic for manipulating the bit is removed since it
serves no useful function.

Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c     |   16 ++--------------
 drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c |    6 ------
 2 files changed, 2 insertions(+), 20 deletions(-)

--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -1187,7 +1187,8 @@ static void bcmgenet_power_up(struct bcm
 
 	switch (mode) {
 	case GENET_POWER_PASSIVE:
-		reg &= ~(EXT_PWR_DOWN_DLL | EXT_PWR_DOWN_BIAS);
+		reg &= ~(EXT_PWR_DOWN_DLL | EXT_PWR_DOWN_BIAS |
+			 EXT_ENERGY_DET_MASK);
 		if (GENET_IS_V5(priv)) {
 			reg &= ~(EXT_PWR_DOWN_PHY_EN |
 				 EXT_PWR_DOWN_PHY_RD |
@@ -2901,12 +2902,6 @@ static int bcmgenet_open(struct net_devi
 
 	bcmgenet_set_hw_addr(priv, dev->dev_addr);
 
-	if (priv->internal_phy) {
-		reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT);
-		reg |= EXT_ENERGY_DET_MASK;
-		bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT);
-	}
-
 	/* Disable RX/TX DMA and flush TX queues */
 	dma_ctrl = bcmgenet_dma_disable(priv);
 
@@ -3623,7 +3618,6 @@ static int bcmgenet_resume(struct device
 	struct bcmgenet_priv *priv = netdev_priv(dev);
 	unsigned long dma_ctrl;
 	int ret;
-	u32 reg;
 
 	if (!netif_running(dev))
 		return 0;
@@ -3655,12 +3649,6 @@ static int bcmgenet_resume(struct device
 
 	bcmgenet_set_hw_addr(priv, dev->dev_addr);
 
-	if (priv->internal_phy) {
-		reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT);
-		reg |= EXT_ENERGY_DET_MASK;
-		bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT);
-	}
-
 	if (priv->wolopts)
 		bcmgenet_power_up(priv, GENET_POWER_WOL_MAGIC);
 
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c
@@ -160,12 +160,6 @@ int bcmgenet_wol_power_down_cfg(struct b
 	reg |= CMD_RX_EN;
 	bcmgenet_umac_writel(priv, reg, UMAC_CMD);
 
-	if (priv->hw_params->flags & GENET_HAS_EXT) {
-		reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT);
-		reg &= ~EXT_ENERGY_DET_MASK;
-		bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT);
-	}
-
 	return 0;
 }
 

[PATCH 5.4 103/108] iio: accel: bma180: Use explicit member assignment

[Greg Kroah-Hartman]

From: Linus Walleij <linus.walleij@linaro.org>

commit 9436abc40139503a7cea22a96437697d048f31c0 upstream

This uses the C99 explicit .member assignment for the
variant data in struct bma180_part_info. This makes it
easier to understand and add new variants.

Cc: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/accel/bma180.c |   68 +++++++++++++++++++++++++++++----------------
 1 file changed, 44 insertions(+), 24 deletions(-)

--- a/drivers/iio/accel/bma180.c
+++ b/drivers/iio/accel/bma180.c
@@ -633,32 +633,52 @@ static const struct iio_chan_spec bma250
 
 static const struct bma180_part_info bma180_part_info[] = {
 	[BMA180] = {
-		bma180_channels, ARRAY_SIZE(bma180_channels),
-		bma180_scale_table, ARRAY_SIZE(bma180_scale_table),
-		bma180_bw_table, ARRAY_SIZE(bma180_bw_table),
-		BMA180_CTRL_REG0, BMA180_RESET_INT,
-		BMA180_CTRL_REG0, BMA180_SLEEP,
-		BMA180_BW_TCS, BMA180_BW,
-		BMA180_OFFSET_LSB1, BMA180_RANGE,
-		BMA180_TCO_Z, BMA180_MODE_CONFIG, BMA180_LOW_POWER,
-		BMA180_CTRL_REG3, BMA180_NEW_DATA_INT,
-		BMA180_RESET,
-		bma180_chip_config,
-		bma180_chip_disable,
+		.channels = bma180_channels,
+		.num_channels = ARRAY_SIZE(bma180_channels),
+		.scale_table = bma180_scale_table,
+		.num_scales = ARRAY_SIZE(bma180_scale_table),
+		.bw_table = bma180_bw_table,
+		.num_bw = ARRAY_SIZE(bma180_bw_table),
+		.int_reset_reg = BMA180_CTRL_REG0,
+		.int_reset_mask = BMA180_RESET_INT,
+		.sleep_reg = BMA180_CTRL_REG0,
+		.sleep_mask = BMA180_SLEEP,
+		.bw_reg = BMA180_BW_TCS,
+		.bw_mask = BMA180_BW,
+		.scale_reg = BMA180_OFFSET_LSB1,
+		.scale_mask = BMA180_RANGE,
+		.power_reg = BMA180_TCO_Z,
+		.power_mask = BMA180_MODE_CONFIG,
+		.lowpower_val = BMA180_LOW_POWER,
+		.int_enable_reg = BMA180_CTRL_REG3,
+		.int_enable_mask = BMA180_NEW_DATA_INT,
+		.softreset_reg = BMA180_RESET,
+		.chip_config = bma180_chip_config,
+		.chip_disable = bma180_chip_disable,
 	},
 	[BMA250] = {
-		bma250_channels, ARRAY_SIZE(bma250_channels),
-		bma250_scale_table, ARRAY_SIZE(bma250_scale_table),
-		bma250_bw_table, ARRAY_SIZE(bma250_bw_table),
-		BMA250_INT_RESET_REG, BMA250_INT_RESET_MASK,
-		BMA250_POWER_REG, BMA250_SUSPEND_MASK,
-		BMA250_BW_REG, BMA250_BW_MASK,
-		BMA250_RANGE_REG, BMA250_RANGE_MASK,
-		BMA250_POWER_REG, BMA250_LOWPOWER_MASK, 1,
-		BMA250_INT_ENABLE_REG, BMA250_DATA_INTEN_MASK,
-		BMA250_RESET_REG,
-		bma250_chip_config,
-		bma250_chip_disable,
+		.channels = bma250_channels,
+		.num_channels = ARRAY_SIZE(bma250_channels),
+		.scale_table = bma250_scale_table,
+		.num_scales = ARRAY_SIZE(bma250_scale_table),
+		.bw_table = bma250_bw_table,
+		.num_bw = ARRAY_SIZE(bma250_bw_table),
+		.int_reset_reg = BMA250_INT_RESET_REG,
+		.int_reset_mask = BMA250_INT_RESET_MASK,
+		.sleep_reg = BMA250_POWER_REG,
+		.sleep_mask = BMA250_SUSPEND_MASK,
+		.bw_reg = BMA250_BW_REG,
+		.bw_mask = BMA250_BW_MASK,
+		.scale_reg = BMA250_RANGE_REG,
+		.scale_mask = BMA250_RANGE_MASK,
+		.power_reg = BMA250_POWER_REG,
+		.power_mask = BMA250_LOWPOWER_MASK,
+		.lowpower_val = 1,
+		.int_enable_reg = BMA250_INT_ENABLE_REG,
+		.int_enable_mask = BMA250_DATA_INTEN_MASK,
+		.softreset_reg = BMA250_RESET_REG,
+		.chip_config = bma250_chip_config,
+		.chip_disable = bma250_chip_disable,
 	},
 };
 

[PATCH 5.4 104/108] iio: accel: bma180: Fix BMA25x bandwidth register values

[Greg Kroah-Hartman]

From: Stephan Gerhold <stephan@gerhold.net>

commit 8090d67421ddab0ae932abab5a60200598bf0bbb upstream

According to the BMA253 datasheet [1] and BMA250 datasheet [2] the
bandwidth value for BMA25x should be set as 01xxx:

  "Settings 00xxx result in a bandwidth of 7.81 Hz; [...]
   It is recommended [...] to use the range from ´01000b´ to ´01111b´
   only in order to be compatible with future products."

However, at the moment the drivers sets bandwidth values from 0 to 6,
which is not recommended and always results into 7.81 Hz bandwidth
according to the datasheet.

Fix this by introducing a bw_offset = 8 = 01000b for BMA25x,
so the additional bit is always set for BMA25x.

[1]: https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bma253-ds000.pdf
[2]: https://datasheet.octopart.com/BMA250-Bosch-datasheet-15540103.pdf

Cc: Peter Meerwald <pmeerw@pmeerw.net>
Fixes: 2017cff24cc0 ("iio:bma180: Add BMA250 chip support")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210526094408.34298-2-stephan@gerhold.net
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/accel/bma180.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/iio/accel/bma180.c
+++ b/drivers/iio/accel/bma180.c
@@ -47,7 +47,7 @@ struct bma180_part_info {
 
 	u8 int_reset_reg, int_reset_mask;
 	u8 sleep_reg, sleep_mask;
-	u8 bw_reg, bw_mask;
+	u8 bw_reg, bw_mask, bw_offset;
 	u8 scale_reg, scale_mask;
 	u8 power_reg, power_mask, lowpower_val;
 	u8 int_enable_reg, int_enable_mask;
@@ -103,6 +103,7 @@ struct bma180_part_info {
 
 #define BMA250_RANGE_MASK	GENMASK(3, 0) /* Range of accel values */
 #define BMA250_BW_MASK		GENMASK(4, 0) /* Accel bandwidth */
+#define BMA250_BW_OFFSET	8
 #define BMA250_SUSPEND_MASK	BIT(7) /* chip will sleep */
 #define BMA250_LOWPOWER_MASK	BIT(6)
 #define BMA250_DATA_INTEN_MASK	BIT(4)
@@ -241,7 +242,8 @@ static int bma180_set_bw(struct bma180_d
 	for (i = 0; i < data->part_info->num_bw; ++i) {
 		if (data->part_info->bw_table[i] == val) {
 			ret = bma180_set_bits(data, data->part_info->bw_reg,
-				data->part_info->bw_mask, i);
+				data->part_info->bw_mask,
+				i + data->part_info->bw_offset);
 			if (ret) {
 				dev_err(&data->client->dev,
 					"failed to set bandwidth\n");
@@ -669,6 +671,7 @@ static const struct bma180_part_info bma
 		.sleep_mask = BMA250_SUSPEND_MASK,
 		.bw_reg = BMA250_BW_REG,
 		.bw_mask = BMA250_BW_MASK,
+		.bw_offset = BMA250_BW_OFFSET,
 		.scale_reg = BMA250_RANGE_REG,
 		.scale_mask = BMA250_RANGE_MASK,
 		.power_reg = BMA250_POWER_REG,

[PATCH 5.4 105/108] btrfs: compression: dont try to compress if we dont have enough pages

[Greg Kroah-Hartman]

From: David Sterba <dsterba@suse.com>

commit f2165627319ffd33a6217275e5690b1ab5c45763 upstream

The early check if we should attempt compression does not take into
account the number of input pages. It can happen that there's only one
page, eg. a tail page after some ranges of the BTRFS_MAX_UNCOMPRESSED
have been processed, or an isolated page that won't be converted to an
inline extent.

The single page would be compressed but a later check would drop it
again because the result size must be at least one block shorter than
the input. That can never work with just one page.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: David Sterba <dsterba@suse.com>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/inode.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -543,7 +543,7 @@ again:
 	 * inode has not been flagged as nocompress.  This flag can
 	 * change at any time if we discover bad compression ratios.
 	 */
-	if (inode_need_compress(inode, start, end)) {
+	if (nr_pages > 1 && inode_need_compress(inode, start, end)) {
 		WARN_ON(pages);
 		pages = kcalloc(nr_pages, sizeof(struct page *), GFP_NOFS);
 		if (!pages) {

[PATCH 5.4 106/108] PCI: Mark AMD Navi14 GPU ATS as broken

[Greg Kroah-Hartman]

From: Evan Quan <evan.quan@amd.com>

commit e8946a53e2a698c148b3b3ed732f43c7747fbeb6 upstream

Observed unexpected GPU hang during runpm stress test on 0x7341 rev 0x00.
Further debugging shows broken ATS is related.

Disable ATS on this part.  Similar issues on other devices:

  a2da5d8cc0b0 ("PCI: Mark AMD Raven iGPU ATS as broken in some platforms")
  45beb31d3afb ("PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken")
  5e89cd303e3a ("PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as broken")

Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20210602021255.939090-1-evan.quan@amd.com
Signed-off-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
Cc: stable@vger.kernel.org
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/quirks.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -5312,7 +5312,8 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SE
 static void quirk_amd_harvest_no_ats(struct pci_dev *pdev)
 {
 	if ((pdev->device == 0x7312 && pdev->revision != 0x00) ||
-	    (pdev->device == 0x7340 && pdev->revision != 0xc5))
+	    (pdev->device == 0x7340 && pdev->revision != 0xc5) ||
+	    (pdev->device == 0x7341 && pdev->revision != 0x00))
 		return;
 
 	pci_info(pdev, "disabling ATS\n");
@@ -5327,6 +5328,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AT
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x7312, quirk_amd_harvest_no_ats);
 /* AMD Navi14 dGPU */
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x7340, quirk_amd_harvest_no_ats);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x7341, quirk_amd_harvest_no_ats);
 #endif /* CONFIG_PCI_ATS */
 
 /* Freescale PCIe doesn't support MSI in RC mode */

[PATCH 5.4 107/108] perf inject: Close inject.output on exit

[Greg Kroah-Hartman]

From: Riccardo Mancini <rickyman7@gmail.com>

commit 02e6246f5364d5260a6ea6f92ab6f409058b162f upstream.

ASan reports a memory leak when running:

  # perf test "83: Zstd perf.data compression/decompression"

which happens inside 'perf inject'.

The bug is caused by inject.output never being closed.

This patch adds the missing perf_data__close().

Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Fixes: 6ef81c55a2b6584c ("perf session: Return error code for perf_session__new() function on failure")
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/c06f682afa964687367cf6e92a64ceb49aec76a5.1626343282.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/perf/builtin-inject.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/tools/perf/builtin-inject.c
+++ b/tools/perf/builtin-inject.c
@@ -836,8 +836,10 @@ int cmd_inject(int argc, const char **ar
 
 	data.path = inject.input_name;
 	inject.session = perf_session__new(&data, inject.output.is_pipe, &inject.tool);
-	if (IS_ERR(inject.session))
-		return PTR_ERR(inject.session);
+	if (IS_ERR(inject.session)) {
+		ret = PTR_ERR(inject.session);
+		goto out_close_output;
+	}
 
 	if (zstd_init(&(inject.session->zstd_data), 0) < 0)
 		pr_warning("Decompression initialization failed.\n");
@@ -874,5 +876,7 @@ int cmd_inject(int argc, const char **ar
 out_delete:
 	zstd_fini(&(inject.session->zstd_data));
 	perf_session__delete(inject.session);
+out_close_output:
+	perf_data__close(&inject.output);
 	return ret;
 }

[PATCH 5.4 108/108] xhci: add xhci_get_virt_ep() helper

[Greg Kroah-Hartman]

From: Mathias Nyman <mathias.nyman@linux.intel.com>

[commit b1adc42d440df3233255e313a45ab7e9b2b74096 upstream]

In several event handlers we need to find the right endpoint
structure from slot_id and ep_index in the event.

Add a helper for this, check that slot_id and ep_index are valid.

Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210129130044.206855-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Carsten Schmid <carsten_schmid@mentor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/xhci-ring.c |   58 +++++++++++++++++++++++++++++++++----------
 drivers/usb/host/xhci.h      |    3 +-
 2 files changed, 47 insertions(+), 14 deletions(-)

--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -440,6 +440,26 @@ void xhci_ring_doorbell_for_active_rings
 	ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
 }
 
+static struct xhci_virt_ep *xhci_get_virt_ep(struct xhci_hcd *xhci,
+					     unsigned int slot_id,
+					     unsigned int ep_index)
+{
+	if (slot_id == 0 || slot_id >= MAX_HC_SLOTS) {
+		xhci_warn(xhci, "Invalid slot_id %u\n", slot_id);
+		return NULL;
+	}
+	if (ep_index >= EP_CTX_PER_DEV) {
+		xhci_warn(xhci, "Invalid endpoint index %u\n", ep_index);
+		return NULL;
+	}
+	if (!xhci->devs[slot_id]) {
+		xhci_warn(xhci, "No xhci virt device for slot_id %u\n", slot_id);
+		return NULL;
+	}
+
+	return &xhci->devs[slot_id]->eps[ep_index];
+}
+
 /* Get the right ring for the given slot_id, ep_index and stream_id.
  * If the endpoint supports streams, boundary check the URB's stream ID.
  * If the endpoint doesn't support streams, return the singular endpoint ring.
@@ -450,7 +470,10 @@ struct xhci_ring *xhci_triad_to_transfer
 {
 	struct xhci_virt_ep *ep;
 
-	ep = &xhci->devs[slot_id]->eps[ep_index];
+	ep = xhci_get_virt_ep(xhci, slot_id, ep_index);
+	if (!ep)
+		return NULL;
+
 	/* Common case: no streams */
 	if (!(ep->ep_state & EP_HAS_STREAMS))
 		return ep->ring;
@@ -743,11 +766,14 @@ static void xhci_handle_cmd_stop_ep(stru
 	memset(&deq_state, 0, sizeof(deq_state));
 	ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3]));
 
+	ep = xhci_get_virt_ep(xhci, slot_id, ep_index);
+	if (!ep)
+		return;
+
 	vdev = xhci->devs[slot_id];
 	ep_ctx = xhci_get_ep_ctx(xhci, vdev->out_ctx, ep_index);
 	trace_xhci_handle_cmd_stop_ep(ep_ctx);
 
-	ep = &xhci->devs[slot_id]->eps[ep_index];
 	last_unlinked_td = list_last_entry(&ep->cancelled_td_list,
 			struct xhci_td, cancelled_td_list);
 
@@ -1068,9 +1094,11 @@ static void xhci_handle_cmd_set_deq(stru
 
 	ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3]));
 	stream_id = TRB_TO_STREAM_ID(le32_to_cpu(trb->generic.field[2]));
-	dev = xhci->devs[slot_id];
-	ep = &dev->eps[ep_index];
+	ep = xhci_get_virt_ep(xhci, slot_id, ep_index);
+	if (!ep)
+		return;
 
+	dev = xhci->devs[slot_id];
 	ep_ring = xhci_stream_id_to_ring(dev, ep_index, stream_id);
 	if (!ep_ring) {
 		xhci_warn(xhci, "WARN Set TR deq ptr command for freed stream ID %u\n",
@@ -1143,9 +1171,9 @@ static void xhci_handle_cmd_set_deq(stru
 	}
 
 cleanup:
-	dev->eps[ep_index].ep_state &= ~SET_DEQ_PENDING;
-	dev->eps[ep_index].queued_deq_seg = NULL;
-	dev->eps[ep_index].queued_deq_ptr = NULL;
+	ep->ep_state &= ~SET_DEQ_PENDING;
+	ep->queued_deq_seg = NULL;
+	ep->queued_deq_ptr = NULL;
 	/* Restart any rings with pending URBs */
 	ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
 }
@@ -1154,10 +1182,15 @@ static void xhci_handle_cmd_reset_ep(str
 		union xhci_trb *trb, u32 cmd_comp_code)
 {
 	struct xhci_virt_device *vdev;
+	struct xhci_virt_ep *ep;
 	struct xhci_ep_ctx *ep_ctx;
 	unsigned int ep_index;
 
 	ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3]));
+	ep = xhci_get_virt_ep(xhci, slot_id, ep_index);
+	if (!ep)
+		return;
+
 	vdev = xhci->devs[slot_id];
 	ep_ctx = xhci_get_ep_ctx(xhci, vdev->out_ctx, ep_index);
 	trace_xhci_handle_cmd_reset_ep(ep_ctx);
@@ -1187,7 +1220,7 @@ static void xhci_handle_cmd_reset_ep(str
 		xhci_ring_cmd_db(xhci);
 	} else {
 		/* Clear our internal halted state */
-		xhci->devs[slot_id]->eps[ep_index].ep_state &= ~EP_HALTED;
+		ep->ep_state &= ~EP_HALTED;
 	}
 
 	/* if this was a soft reset, then restart */
@@ -2356,14 +2389,13 @@ static int handle_tx_event(struct xhci_h
 	trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
 	ep_trb_dma = le64_to_cpu(event->buffer);
 
-	xdev = xhci->devs[slot_id];
-	if (!xdev) {
-		xhci_err(xhci, "ERROR Transfer event pointed to bad slot %u\n",
-			 slot_id);
+	ep = xhci_get_virt_ep(xhci, slot_id, ep_index);
+	if (!ep) {
+		xhci_err(xhci, "ERROR Invalid Transfer event\n");
 		goto err_out;
 	}
 
-	ep = &xdev->eps[ep_index];
+	xdev = xhci->devs[slot_id];
 	ep_ring = xhci_dma_to_transfer_ring(ep, ep_trb_dma);
 	ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
 
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -993,6 +993,7 @@ struct xhci_interval_bw_table {
 	unsigned int		ss_bw_out;
 };
 
+#define EP_CTX_PER_DEV		31
 
 struct xhci_virt_device {
 	struct usb_device		*udev;
@@ -1007,7 +1008,7 @@ struct xhci_virt_device {
 	struct xhci_container_ctx       *out_ctx;
 	/* Used for addressing devices and configuration changes */
 	struct xhci_container_ctx       *in_ctx;
-	struct xhci_virt_ep		eps[31];
+	struct xhci_virt_ep		eps[EP_CTX_PER_DEV];
 	u8				fake_port;
 	u8				real_port;
 	struct xhci_interval_bw_table	*bw_table;

Re: [PATCH 5.4 000/108] 5.4.136-rc1 review

[Florian Fainelli]

On 7/26/21 8:38 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.136 release.
> There are 108 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 28 Jul 2021 15:38:12 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.136-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 5.4 000/108] 5.4.136-rc1 review

[Shuah Khan]

On 7/26/21 9:38 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.136 release.
> There are 108 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 28 Jul 2021 15:38:12 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.136-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 5.4 000/108] 5.4.136-rc1 review

[Naresh Kamboju]

On Mon, 26 Jul 2021 at 21:25, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.4.136 release.
> There are 108 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 28 Jul 2021 15:38:12 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.136-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 5.4.136-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-5.4.y
* git commit: 77cfe86f32232bb4b8fd35352d6db630e5ef4985
* git describe: v5.4.135-109-g77cfe86f3223
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.4.y/build/v5.4.135-109-g77cfe86f3223

## No regressions (compared to v5.4.134-72-gdcc7e2dee7e9)

## No fixes (compared to v5.4.134-72-gdcc7e2dee7e9)

## Test result summary
 total: 77330, pass: 62228, fail: 1011, skip: 12507, xfail: 1584,

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 192 total, 192 passed, 0 failed
* arm64: 26 total, 26 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 15 total, 15 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 45 total, 45 passed, 0 failed
* parisc: 9 total, 9 passed, 0 failed
* powerpc: 27 total, 27 passed, 0 failed
* riscv: 21 total, 21 passed, 0 failed
* s390: 9 total, 9 passed, 0 failed
* sh: 18 total, 18 passed, 0 failed
* sparc: 9 total, 9 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 26 total, 26 passed, 0 failed

## Test suites summary
* fwts
* igt-gpu-tools
* install-android-platform-tools-r2600
* kselftest-
* kselftest-android
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.4 000/108] 5.4.136-rc1 review

[Sudip Mukherjee]

Hi Greg,

On Mon, Jul 26, 2021 at 05:38:01PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.136 release.
> There are 108 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 28 Jul 2021 15:38:12 +0000.
> Anything received after that time might be too late.

Build test:
mips (gcc version 11.1.1 20210723): 65 configs -> no failure
arm (gcc version 11.1.1 20210723): 107 configs -> no new failure
arm64 (gcc version 11.1.1 20210723): 2 configs -> no failure
x86_64 (gcc version 10.2.1 20210110): 2 configs -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression.


Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>

--
Regards
Sudip

Re: [PATCH 5.4 000/108] 5.4.136-rc1 review

[Guenter Roeck]

On Mon, Jul 26, 2021 at 05:38:01PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.136 release.
> There are 108 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 28 Jul 2021 15:38:12 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 157 pass: 157 fail: 0
Qemu test results:
	total: 436 pass: 436 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter