[PATCH AUTOSEL 4.19 1/6] regulator: rt5033: Fix n_voltages settings for BUCK and LDO

[PATCH AUTOSEL 4.19 1/6] regulator: rt5033: Fix n_voltages settings for BUCK and LDO

[Sasha Levin]

From: Axel Lin <axel.lin@ingics.com>

[ Upstream commit 6549c46af8551b346bcc0b9043f93848319acd5c ]

For linear regulators, the n_voltages should be (max - min) / step + 1.

Buck voltage from 1v to 3V, per step 100mV, and vout mask is 0x1f.
If value is from 20 to 31, the voltage will all be fixed to 3V.
And LDO also, just vout range is different from 1.2v to 3v, step is the
same. If value is from 18 to 31, the voltage will also be fixed to 3v.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/20210627080418.1718127-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/mfd/rt5033-private.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/linux/mfd/rt5033-private.h b/include/linux/mfd/rt5033-private.h
index 1b63fc2f42d1..52d53d134f72 100644
--- a/include/linux/mfd/rt5033-private.h
+++ b/include/linux/mfd/rt5033-private.h
@@ -203,13 +203,13 @@ enum rt5033_reg {
 #define RT5033_REGULATOR_BUCK_VOLTAGE_MIN		1000000U
 #define RT5033_REGULATOR_BUCK_VOLTAGE_MAX		3000000U
 #define RT5033_REGULATOR_BUCK_VOLTAGE_STEP		100000U
-#define RT5033_REGULATOR_BUCK_VOLTAGE_STEP_NUM		32
+#define RT5033_REGULATOR_BUCK_VOLTAGE_STEP_NUM		21
 
 /* RT5033 regulator LDO output voltage uV */
 #define RT5033_REGULATOR_LDO_VOLTAGE_MIN		1200000U
 #define RT5033_REGULATOR_LDO_VOLTAGE_MAX		3000000U
 #define RT5033_REGULATOR_LDO_VOLTAGE_STEP		100000U
-#define RT5033_REGULATOR_LDO_VOLTAGE_STEP_NUM		32
+#define RT5033_REGULATOR_LDO_VOLTAGE_STEP_NUM		19
 
 /* RT5033 regulator SAFE LDO output voltage uV */
 #define RT5033_REGULATOR_SAFE_LDO_VOLTAGE		4900000U
-- 
2.30.2

[PATCH AUTOSEL 4.19 2/6] ASoC: tlv320aic31xx: fix reversed bclk/wclk master bits

[Sasha Levin]

From: Kyle Russell <bkylerussell@gmail.com>

[ Upstream commit 9cf76a72af6ab81030dea6481b1d7bdd814fbdaf ]

These are backwards from Table 7-71 of the TLV320AIC3100 spec [1].

This was broken in 12eb4d66ba2e when BCLK_MASTER and WCLK_MASTER
were converted from 0x08 and 0x04 to BIT(2) and BIT(3), respectively.

-#define AIC31XX_BCLK_MASTER		0x08
-#define AIC31XX_WCLK_MASTER		0x04
+#define AIC31XX_BCLK_MASTER		BIT(2)
+#define AIC31XX_WCLK_MASTER		BIT(3)

Probably just a typo since the defines were not listed in bit order.

[1] https://www.ti.com/lit/gpn/tlv320aic3100

Signed-off-by: Kyle Russell <bkylerussell@gmail.com>
Link: https://lore.kernel.org/r/20210622010941.241386-1-bkylerussell@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/tlv320aic31xx.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/tlv320aic31xx.h b/sound/soc/codecs/tlv320aic31xx.h
index 0b587585b38b..6071de5fca57 100644
--- a/sound/soc/codecs/tlv320aic31xx.h
+++ b/sound/soc/codecs/tlv320aic31xx.h
@@ -147,8 +147,8 @@ struct aic31xx_pdata {
 #define AIC31XX_WORD_LEN_24BITS		0x02
 #define AIC31XX_WORD_LEN_32BITS		0x03
 #define AIC31XX_IFACE1_MASTER_MASK	GENMASK(3, 2)
-#define AIC31XX_BCLK_MASTER		BIT(2)
-#define AIC31XX_WCLK_MASTER		BIT(3)
+#define AIC31XX_BCLK_MASTER		BIT(3)
+#define AIC31XX_WCLK_MASTER		BIT(2)
 
 /* AIC31XX_DATA_OFFSET */
 #define AIC31XX_DATA_OFFSET_MASK	GENMASK(7, 0)
-- 
2.30.2

[PATCH AUTOSEL 4.19 3/6] r8152: Fix potential PM refcount imbalance

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 9c23aa51477a37f8b56c3c40192248db0663c196 ]

rtl8152_close() takes the refcount via usb_autopm_get_interface() but
it doesn't release when RTL8152_UNPLUG test hits.  This may lead to
the imbalance of PM refcount.  This patch addresses it.

Link: https://bugzilla.suse.com/show_bug.cgi?id=1186194
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/r8152.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 726fb5561a0f..4764e4f54cef 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -3960,9 +3960,10 @@ static int rtl8152_close(struct net_device *netdev)
 		tp->rtl_ops.down(tp);
 
 		mutex_unlock(&tp->control);
+	}
 
+	if (!res)
 		usb_autopm_put_interface(tp->intf);
-	}
 
 	free_all_mem(tp);
 
-- 
2.30.2

[PATCH AUTOSEL 4.19 4/6] qed: fix possible unpaired spin_{un}lock_bh in _qed_mcp_cmd_and_union()

[Sasha Levin]

From: Jia He <justin.he@arm.com>

[ Upstream commit 6206b7981a36476f4695d661ae139f7db36a802d ]

Liajian reported a bug_on hit on a ThunderX2 arm64 server with FastLinQ
QL41000 ethernet controller:
 BUG: scheduling while atomic: kworker/0:4/531/0x00000200
  [qed_probe:488()]hw prepare failed
  kernel BUG at mm/vmalloc.c:2355!
  Internal error: Oops - BUG: 0 [#1] SMP
  CPU: 0 PID: 531 Comm: kworker/0:4 Tainted: G W 5.4.0-77-generic #86-Ubuntu
  pstate: 00400009 (nzcv daif +PAN -UAO)
 Call trace:
  vunmap+0x4c/0x50
  iounmap+0x48/0x58
  qed_free_pci+0x60/0x80 [qed]
  qed_probe+0x35c/0x688 [qed]
  __qede_probe+0x88/0x5c8 [qede]
  qede_probe+0x60/0xe0 [qede]
  local_pci_probe+0x48/0xa0
  work_for_cpu_fn+0x24/0x38
  process_one_work+0x1d0/0x468
  worker_thread+0x238/0x4e0
  kthread+0xf0/0x118
  ret_from_fork+0x10/0x18

In this case, qed_hw_prepare() returns error due to hw/fw error, but in
theory work queue should be in process context instead of interrupt.

The root cause might be the unpaired spin_{un}lock_bh() in
_qed_mcp_cmd_and_union(), which causes botton half is disabled incorrectly.

Reported-by: Lijian Zhang <Lijian.Zhang@arm.com>
Signed-off-by: Jia He <justin.he@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_mcp.c | 23 +++++++++++++++++------
 1 file changed, 17 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.c b/drivers/net/ethernet/qlogic/qed/qed_mcp.c
index 938ace333af1..0d62db3241be 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_mcp.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.c
@@ -498,14 +498,18 @@ _qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn,
 
 		spin_lock_bh(&p_hwfn->mcp_info->cmd_lock);
 
-		if (!qed_mcp_has_pending_cmd(p_hwfn))
+		if (!qed_mcp_has_pending_cmd(p_hwfn)) {
+			spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock);
 			break;
+		}
 
 		rc = qed_mcp_update_pending_cmd(p_hwfn, p_ptt);
-		if (!rc)
+		if (!rc) {
+			spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock);
 			break;
-		else if (rc != -EAGAIN)
+		} else if (rc != -EAGAIN) {
 			goto err;
+		}
 
 		spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock);
 
@@ -522,6 +526,8 @@ _qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn,
 		return -EAGAIN;
 	}
 
+	spin_lock_bh(&p_hwfn->mcp_info->cmd_lock);
+
 	/* Send the mailbox command */
 	qed_mcp_reread_offsets(p_hwfn, p_ptt);
 	seq_num = ++p_hwfn->mcp_info->drv_mb_seq;
@@ -548,14 +554,18 @@ _qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn,
 
 		spin_lock_bh(&p_hwfn->mcp_info->cmd_lock);
 
-		if (p_cmd_elem->b_is_completed)
+		if (p_cmd_elem->b_is_completed) {
+			spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock);
 			break;
+		}
 
 		rc = qed_mcp_update_pending_cmd(p_hwfn, p_ptt);
-		if (!rc)
+		if (!rc) {
+			spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock);
 			break;
-		else if (rc != -EAGAIN)
+		} else if (rc != -EAGAIN) {
 			goto err;
+		}
 
 		spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock);
 	} while (++cnt < max_retries);
@@ -576,6 +586,7 @@ _qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn,
 		return -EAGAIN;
 	}
 
+	spin_lock_bh(&p_hwfn->mcp_info->cmd_lock);
 	qed_mcp_cmd_del_elem(p_hwfn, p_cmd_elem);
 	spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock);
 
-- 
2.30.2

[PATCH AUTOSEL 4.19 5/6] mt7530 fix mt7530_fdb_write vid missing ivl bit

[Sasha Levin]

From: Eric Woudstra <ericwouds@gmail.com>

[ Upstream commit 11d8d98cbeef1496469b268d79938b05524731e8 ]

According to reference guides mt7530 (mt7620) and mt7531:

NOTE: When IVL is reset, MAC[47:0] and FID[2:0] will be used to
read/write the address table. When IVL is set, MAC[47:0] and CVID[11:0]
will be used to read/write the address table.

Since the function only fills in CVID and no FID, we need to set the
IVL bit. The existing code does not set it.

This is a fix for the issue I dropped here earlier:

http://lists.infradead.org/pipermail/linux-mediatek/2021-June/025697.html

With this patch, it is now possible to delete the 'self' fdb entry
manually. However, wifi roaming still has the same issue, the entry
does not get deleted automatically. Wifi roaming also needs a fix
somewhere else to function correctly in combination with vlan.

Signed-off-by: Eric Woudstra <ericwouds@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/mt7530.c | 1 +
 drivers/net/dsa/mt7530.h | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 6335c4ea0957..96dbc51caf48 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -414,6 +414,7 @@ mt7530_fdb_write(struct mt7530_priv *priv, u16 vid,
 	int i;
 
 	reg[1] |= vid & CVID_MASK;
+	reg[1] |= ATA2_IVL;
 	reg[2] |= (aging & AGE_TIMER_MASK) << AGE_TIMER;
 	reg[2] |= (port_mask & PORT_MAP_MASK) << PORT_MAP;
 	/* STATIC_ENT indicate that entry is static wouldn't
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index 101d309ee445..72f53e6bc145 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -43,6 +43,7 @@
 #define  STATIC_EMP			0
 #define  STATIC_ENT			3
 #define MT7530_ATA2			0x78
+#define  ATA2_IVL			BIT(15)
 
 /* Register for address table write data */
 #define MT7530_ATWD			0x7c
-- 
2.30.2

Re: [PATCH AUTOSEL 4.19 5/6] mt7530 fix mt7530_fdb_write vid missing ivl bit

[Eric Woudstra]

A few days after this patch, I send in another as it needs a fix. If you apply this patch, please also apply the other: set ivl bit only for vid larger than 1.

On Jul 27, 2021, 3:20 PM, at 3:20 PM, Sasha Levin <sashal@kernel.org> wrote:
>From: Eric Woudstra <ericwouds@gmail.com>
>
>[ Upstream commit 11d8d98cbeef1496469b268d79938b05524731e8 ]
>
>According to reference guides mt7530 (mt7620) and mt7531:
>
>NOTE: When IVL is reset, MAC[47:0] and FID[2:0] will be used to
>read/write the address table. When IVL is set, MAC[47:0] and CVID[11:0]
>will be used to read/write the address table.
>
>Since the function only fills in CVID and no FID, we need to set the
>IVL bit. The existing code does not set it.
>
>This is a fix for the issue I dropped here earlier:
>
>http://lists.infradead.org/pipermail/linux-mediatek/2021-June/025697.html
>
>With this patch, it is now possible to delete the 'self' fdb entry
>manually. However, wifi roaming still has the same issue, the entry
>does not get deleted automatically. Wifi roaming also needs a fix
>somewhere else to function correctly in combination with vlan.
>
>Signed-off-by: Eric Woudstra <ericwouds@gmail.com>
>Signed-off-by: David S. Miller <davem@davemloft.net>
>Signed-off-by: Sasha Levin <sashal@kernel.org>
>---
> drivers/net/dsa/mt7530.c | 1 +
> drivers/net/dsa/mt7530.h | 1 +
> 2 files changed, 2 insertions(+)
>
>diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
>index 6335c4ea0957..96dbc51caf48 100644
>--- a/drivers/net/dsa/mt7530.c
>+++ b/drivers/net/dsa/mt7530.c
>@@ -414,6 +414,7 @@ mt7530_fdb_write(struct mt7530_priv *priv, u16 vid,
> 	int i;
>
> 	reg[1] |= vid & CVID_MASK;
>+	reg[1] |= ATA2_IVL;
> 	reg[2] |= (aging & AGE_TIMER_MASK) << AGE_TIMER;
> 	reg[2] |= (port_mask & PORT_MAP_MASK) << PORT_MAP;
> 	/* STATIC_ENT indicate that entry is static wouldn't
>diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
>index 101d309ee445..72f53e6bc145 100644
>--- a/drivers/net/dsa/mt7530.h
>+++ b/drivers/net/dsa/mt7530.h
>@@ -43,6 +43,7 @@
> #define  STATIC_EMP			0
> #define  STATIC_ENT			3
> #define MT7530_ATA2			0x78
>+#define  ATA2_IVL			BIT(15)
>
> /* Register for address table write data */
> #define MT7530_ATWD			0x7c
>--
>2.30.2

Re: [PATCH AUTOSEL 4.19 5/6] mt7530 fix mt7530_fdb_write vid missing ivl bit

[Sasha Levin]

On Sat, Jul 31, 2021 at 03:27:04PM +0200, Eric Woudstra wrote:
>
>A few days after this patch, I send in another as it needs a fix. If you apply this patch, please also apply the other: set ivl bit only for vid larger than 1.

Looks like the fix didn't make it yet, so I'll drop this one for now.

-- 
Thanks,
Sasha

[PATCH AUTOSEL 4.19 6/6] net: Fix zero-copy head len calculation.

[Sasha Levin]

From: Pravin B Shelar <pshelar@ovn.org>

[ Upstream commit a17ad0961706244dce48ec941f7e476a38c0e727 ]

In some cases skb head could be locked and entire header
data is pulled from skb. When skb_zerocopy() called in such cases,
following BUG is triggered. This patch fixes it by copying entire
skb in such cases.
This could be optimized incase this is performance bottleneck.

---8<---
kernel BUG at net/core/skbuff.c:2961!
invalid opcode: 0000 [#1] SMP PTI
CPU: 2 PID: 0 Comm: swapper/2 Tainted: G           OE     5.4.0-77-generic #86-Ubuntu
Hardware name: OpenStack Foundation OpenStack Nova, BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:skb_zerocopy+0x37a/0x3a0
RSP: 0018:ffffbcc70013ca38 EFLAGS: 00010246
Call Trace:
 <IRQ>
 queue_userspace_packet+0x2af/0x5e0 [openvswitch]
 ovs_dp_upcall+0x3d/0x60 [openvswitch]
 ovs_dp_process_packet+0x125/0x150 [openvswitch]
 ovs_vport_receive+0x77/0xd0 [openvswitch]
 netdev_port_receive+0x87/0x130 [openvswitch]
 netdev_frame_hook+0x4b/0x60 [openvswitch]
 __netif_receive_skb_core+0x2b4/0xc90
 __netif_receive_skb_one_core+0x3f/0xa0
 __netif_receive_skb+0x18/0x60
 process_backlog+0xa9/0x160
 net_rx_action+0x142/0x390
 __do_softirq+0xe1/0x2d6
 irq_exit+0xae/0xb0
 do_IRQ+0x5a/0xf0
 common_interrupt+0xf/0xf

Code that triggered BUG:
int
skb_zerocopy(struct sk_buff *to, struct sk_buff *from, int len, int hlen)
{
        int i, j = 0;
        int plen = 0; /* length of skb->head fragment */
        int ret;
        struct page *page;
        unsigned int offset;

        BUG_ON(!from->head_frag && !hlen);

Signed-off-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/skbuff.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index ea9684bcc2e8..e1daab49b0eb 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -2705,8 +2705,11 @@ skb_zerocopy_headlen(const struct sk_buff *from)
 
 	if (!from->head_frag ||
 	    skb_headlen(from) < L1_CACHE_BYTES ||
-	    skb_shinfo(from)->nr_frags >= MAX_SKB_FRAGS)
+	    skb_shinfo(from)->nr_frags >= MAX_SKB_FRAGS) {
 		hlen = skb_headlen(from);
+		if (!hlen)
+			hlen = from->len;
+	}
 
 	if (skb_has_frag_list(from))
 		hlen = from->len;
-- 
2.30.2