From: Maxime Ripard <maxime@cerno.tech> To: Sam Ravnborg <sam@ravnborg.org>, Daniel Vetter <daniel.vetter@intel.com>, David Airlie <airlied@linux.ie>, Thierry Reding <thierry.reding@gmail.com>, Laurent Pinchart <Laurent.pinchart@ideasonboard.com>, Maarten Lankhorst <maarten.lankhorst@linux.intel.com>, Thomas Zimmermann <tzimmermann@suse.de>, Maxime Ripard <maxime@cerno.tech>, Jernej Skrabec <jernej.skrabec@gmail.com>, Neil Armstrong <narmstrong@baylibre.com>, Andrzej Hajda <a.hajda@samsung.com>, Jonas Karlman <jonas@kwiboo.se>, Robert Foss <robert.foss@linaro.org> Cc: linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org Subject: [PATCH v2 6/8] drm/vc4: dsi: Switch to drm_of_get_bridge Date: Wed, 28 Jul 2021 15:32:27 +0200 [thread overview] Message-ID: <20210728133229.2247965-7-maxime@cerno.tech> (raw) In-Reply-To: <20210728133229.2247965-1-maxime@cerno.tech> The new drm_of_get_bridge removes most of the boilerplate we have to deal with. Let's switch to it. Signed-off-by: Maxime Ripard <maxime@cerno.tech> fixup! drm/vc4: dsi: Switch to drm_of_get_bridge --- drivers/gpu/drm/vc4/vc4_drv.c | 2 ++ drivers/gpu/drm/vc4/vc4_dsi.c | 28 ++++------------------------ 2 files changed, 6 insertions(+), 24 deletions(-) diff --git a/drivers/gpu/drm/vc4/vc4_drv.c b/drivers/gpu/drm/vc4/vc4_drv.c index 73335feb712f..ff056ee8bc4b 100644 --- a/drivers/gpu/drm/vc4/vc4_drv.c +++ b/drivers/gpu/drm/vc4/vc4_drv.c @@ -25,7 +25,9 @@ #include <linux/device.h> #include <linux/dma-mapping.h> #include <linux/io.h> +#include <linux/i2c.h> #include <linux/module.h> +#include <linux/of_graph.h> #include <linux/of_platform.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c index 6dfcbd9e234e..3db03c95707f 100644 --- a/drivers/gpu/drm/vc4/vc4_dsi.c +++ b/drivers/gpu/drm/vc4/vc4_dsi.c @@ -1489,7 +1489,6 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data) struct drm_device *drm = dev_get_drvdata(master); struct vc4_dsi *dsi = dev_get_drvdata(dev); struct vc4_dsi_encoder *vc4_dsi_encoder; - struct drm_panel *panel; const struct of_device_id *match; dma_cap_mask_t dma_mask; int ret; @@ -1601,27 +1600,9 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data) return ret; } - ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0, - &panel, &dsi->bridge); - if (ret) { - /* If the bridge or panel pointed by dev->of_node is not - * enabled, just return 0 here so that we don't prevent the DRM - * dev from being registered. Of course that means the DSI - * encoder won't be exposed, but that's not a problem since - * nothing is connected to it. - */ - if (ret == -ENODEV) - return 0; - - return ret; - } - - if (panel) { - dsi->bridge = devm_drm_panel_bridge_add_typed(dev, panel, - DRM_MODE_CONNECTOR_DSI); - if (IS_ERR(dsi->bridge)) - return PTR_ERR(dsi->bridge); - } + dsi->bridge = devm_drm_of_get_bridge(dev, dev->of_node, 0, 0); + if (IS_ERR(dsi->bridge)) + return PTR_ERR(dsi->bridge); /* The esc clock rate is supposed to always be 100Mhz. */ ret = clk_set_rate(dsi->escape_clock, 100 * 1000000); @@ -1661,8 +1642,7 @@ static void vc4_dsi_unbind(struct device *dev, struct device *master, { struct vc4_dsi *dsi = dev_get_drvdata(dev); - if (dsi->bridge) - pm_runtime_disable(dev); + pm_runtime_disable(dev); /* * Restore the bridge_chain so the bridge detach procedure can happen -- 2.31.1
next prev parent reply other threads:[~2021-07-28 13:32 UTC|newest] Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-07-28 13:32 [PATCH v2 0/8] drm/bridge: Make panel and bridge probe order consistent Maxime Ripard 2021-07-28 13:32 ` [PATCH v2 1/8] Revert "drm/vc4: dsi: Only register our component once a DSI device is attached" Maxime Ripard 2021-07-28 13:32 ` [PATCH v2 2/8] drm/bridge: Add a function to abstract away panels Maxime Ripard 2021-07-28 13:32 ` [PATCH v2 3/8] drm/bridge: Add documentation sections Maxime Ripard 2021-07-28 13:32 ` [PATCH v2 4/8] drm/bridge: Document the probe issue with MIPI-DSI bridges Maxime Ripard 2021-07-28 13:32 ` [PATCH v2 5/8] drm/panel: Create attach and detach callbacks Maxime Ripard 2021-07-28 13:32 ` Maxime Ripard [this message] 2021-07-28 13:32 ` [PATCH v2 7/8] drm/panel: raspberrypi-touchscreen: Use the attach hook Maxime Ripard 2021-07-28 13:32 ` [PATCH v2 8/8] drm/panel: raspberrypi-touchscreen: Remove MIPI-DSI driver Maxime Ripard [not found] ` <CGME20210804140941eucas1p2d4d4ec491074530c714797523aec05ea@eucas1p2.samsung.com> 2021-08-04 14:09 ` [PATCH v2 0/8] drm/bridge: Make panel and bridge probe order consistent a.hajda 2021-08-09 8:00 ` Jagan Teki 2021-08-09 12:03 ` Andrzej Hajda 2021-08-20 16:49 ` Maxime Ripard
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210728133229.2247965-7-maxime@cerno.tech \ --to=maxime@cerno.tech \ --cc=Laurent.pinchart@ideasonboard.com \ --cc=a.hajda@samsung.com \ --cc=airlied@linux.ie \ --cc=daniel.vetter@intel.com \ --cc=dri-devel@lists.freedesktop.org \ --cc=jernej.skrabec@gmail.com \ --cc=jonas@kwiboo.se \ --cc=linux-kernel@vger.kernel.org \ --cc=maarten.lankhorst@linux.intel.com \ --cc=narmstrong@baylibre.com \ --cc=robert.foss@linaro.org \ --cc=sam@ravnborg.org \ --cc=thierry.reding@gmail.com \ --cc=tzimmermann@suse.de \ --subject='Re: [PATCH v2 6/8] drm/vc4: dsi: Switch to drm_of_get_bridge' \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).