From: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
To: Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: <alsa-devel@alsa-project.org>, <patches@opensource.cirrus.com>,
<linux-kernel@vger.kernel.org>,
Stefan Binding <sbinding@opensource.cirrus.com>
Subject: [PATCH v2 09/27] ALSA: hda/cs8409: Mask CS42L42 wake events
Date: Wed, 28 Jul 2021 14:43:50 +0100 [thread overview]
Message-ID: <20210728134408.369396-10-vitalyr@opensource.cirrus.com> (raw)
In-Reply-To: <20210728134408.369396-1-vitalyr@opensource.cirrus.com>
From: Stefan Binding <sbinding@opensource.cirrus.com>
Wake events are not needed for jack detect.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Changes in v2:
- No changes
---
sound/pci/hda/patch_cs8409.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/pci/hda/patch_cs8409.c b/sound/pci/hda/patch_cs8409.c
index 2ed07ab3f47e..f4401c1e8572 100644
--- a/sound/pci/hda/patch_cs8409.c
+++ b/sound/pci/hda/patch_cs8409.c
@@ -399,11 +399,11 @@ static void cs8409_cs42l42_enable_jack_detect(struct hda_codec *codec)
cs8409_i2c_write(codec, CS42L42_I2C_ADDR, 0x1b70, 0x00a0, 1);
/* Clear WAKE# */
- cs8409_i2c_write(codec, CS42L42_I2C_ADDR, 0x1b71, 0x0001, 1);
+ cs8409_i2c_write(codec, CS42L42_I2C_ADDR, 0x1b71, 0x00C1, 1);
/* Wait ~2.5ms */
usleep_range(2500, 3000);
/* Set mode WAKE# output follows the combination logic directly */
- cs8409_i2c_write(codec, CS42L42_I2C_ADDR, 0x1b71, 0x0020, 1);
+ cs8409_i2c_write(codec, CS42L42_I2C_ADDR, 0x1b71, 0x00C0, 1);
/* Clear interrupts status */
cs8409_i2c_read(codec, CS42L42_I2C_ADDR, 0x130f, 1);
cs8409_i2c_read(codec, CS42L42_I2C_ADDR, 0x1b7b, 1);
--
2.25.1
next prev parent reply other threads:[~2021-07-28 13:44 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-28 13:43 [PATCH v2 00/27] ALSA: hda/cirrus: Split generic cirrus HDA codecs and CS8490 bridge into separate modules Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 01/27] ALSA: hda/cirrus: Move CS8409 HDA bridge to separate module Vitaly Rodionov
2021-07-29 9:50 ` Takashi Iwai
2021-07-28 13:43 ` [PATCH v2 02/27] ALSA: hda/cs8409: Move arrays of configuration to a new file Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 03/27] ALSA: hda/cs8409: Use enums for register names and coefficients Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 04/27] ALSA: hda/cs8409: Mask all CS42L42 interrupts on initialization Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 05/27] ALSA: hda/cs8409: Reduce HS pops/clicks for Cyborg Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 06/27] ALSA: hda/cs8409: Disable unnecessary Ring Sense for Cyborg/Warlock/Bullseye Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 07/27] ALSA: hda/cs8409: Disable unsolicited responses during suspend Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 08/27] ALSA: hda/cs8409: Disable unsolicited response for the first boot Vitaly Rodionov
2021-07-28 13:43 ` Vitaly Rodionov [this message]
2021-07-28 13:43 ` [PATCH v2 10/27] ALSA: hda/cs8409: Simplify CS42L42 jack detect Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 11/27] ALSA: hda/cs8409: Prevent I2C access during suspend time Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 12/27] ALSA: hda/cs8409: Generalize volume controls Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 13/27] ALSA: hda/cs8409: Dont disable I2C clock between consecutive accesses Vitaly Rodionov
2021-07-29 9:48 ` Takashi Iwai
2021-07-28 13:43 ` [PATCH v2 14/27] ALSA: hda/cs8409: Avoid setting the same I2C address for every access Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 15/27] ALSA: hda/cs8409: Avoid re-setting the same page as the last access Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 16/27] ALSA: hda/cs8409: Support i2c bulk read/write functions Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 17/27] ALSA: hda/cs8409: Separate CS8409, CS42L42 and project functions Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 18/27] ALSA: hda/cs8409: Move codec properties to its own struct Vitaly Rodionov
2021-07-28 13:44 ` [PATCH v2 19/27] ALSA: hda/cs8409: Support multiple sub_codecs for Suspend/Resume/Unsol events Vitaly Rodionov
2021-07-28 13:44 ` [PATCH v2 20/27] ALSA: hda/cs8409: Add Support to disable jack type detection for CS42L42 Vitaly Rodionov
2021-07-28 13:44 ` [PATCH v2 21/27] ALSA: hda/cs8409: Add support for dolphin Vitaly Rodionov
2021-07-28 13:44 ` [PATCH v2 22/27] ALSA: hda/cs8409: Enable Full Scale Volume for Line Out Codec on Dolphin Vitaly Rodionov
2021-07-28 13:44 ` [PATCH v2 23/27] ALSA: hda/cs8409: Set fixed sample rate of 48kHz for CS42L42 Vitaly Rodionov
2021-07-28 13:44 ` [PATCH v2 24/27] ALSA: hda/cs8409: Use timeout rather than retries for I2C transaction waits Vitaly Rodionov
2021-07-28 13:44 ` [PATCH v2 25/27] ALSA: hda/cs8409: Remove unnecessary delays Vitaly Rodionov
2021-07-28 13:44 ` [PATCH v2 26/27] ALSA: hda/cs8409: Follow correct CS42L42 power down sequence for suspend Vitaly Rodionov
2021-07-28 13:44 ` [PATCH v2 27/27] ALSA: hda/cs8409: Unmute/Mute codec when stream starts/stops Vitaly Rodionov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210728134408.369396-10-vitalyr@opensource.cirrus.com \
--to=vitalyr@opensource.cirrus.com \
--cc=alsa-devel@alsa-project.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
--cc=perex@perex.cz \
--cc=sbinding@opensource.cirrus.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).