From: Mathieu Poirier <mathieu.poirier@linaro.org> To: Mike Leach <mike.leach@linaro.org> Cc: linux-arm-kernel@lists.infradead.org, coresight@lists.linaro.org, suzuki.poulose@arm.com, yabinc@google.com, leo.yan@linaro.org, alexander.shishkin@linux.intel.com, tingwei@codeaurora.org, gregkh@linuxfoundation.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH v9 05/10] coresight: syscfg: Add API to activate and enable configurations Date: Wed, 28 Jul 2021 10:24:09 -0600 [thread overview] Message-ID: <20210728162409.GA2763979@p14s> (raw) In-Reply-To: <20210723165444.1048-6-mike.leach@linaro.org> On Fri, Jul 23, 2021 at 05:54:39PM +0100, Mike Leach wrote: > Configurations are first activated, then when any coresight device is > enabled, the active configurations are checked and any matching > one is enabled. > > This patch provides the activation / enable API. > > Signed-off-by: Mike Leach <mike.leach@linaro.org> > --- > .../hwtracing/coresight/coresight-config.h | 2 + > .../hwtracing/coresight/coresight-syscfg.c | 212 ++++++++++++++++++ > .../hwtracing/coresight/coresight-syscfg.h | 8 + > include/linux/coresight.h | 2 + > 4 files changed, 224 insertions(+) > > diff --git a/drivers/hwtracing/coresight/coresight-config.h b/drivers/hwtracing/coresight/coresight-config.h > index 0667581822c1..25eb6c632692 100644 > --- a/drivers/hwtracing/coresight/coresight-config.h > +++ b/drivers/hwtracing/coresight/coresight-config.h > @@ -127,6 +127,7 @@ struct cscfg_feature_desc { > * @nr_total_params: Sum of all parameters declared by used features > * @presets: Array of preset values. > * @event_ea: Extended attribute for perf event value > + * @active_cnt: ref count for activate on this configuration. > * > */ > struct cscfg_config_desc { > @@ -139,6 +140,7 @@ struct cscfg_config_desc { > int nr_total_params; > const u64 *presets; /* nr_presets * nr_total_params */ > struct dev_ext_attribute *event_ea; > + atomic_t active_cnt; > }; > > /** > diff --git a/drivers/hwtracing/coresight/coresight-syscfg.c b/drivers/hwtracing/coresight/coresight-syscfg.c > index b93f2b4a777e..8903aab36c51 100644 > --- a/drivers/hwtracing/coresight/coresight-syscfg.c > +++ b/drivers/hwtracing/coresight/coresight-syscfg.c > @@ -282,6 +282,7 @@ static int cscfg_load_config(struct cscfg_config_desc *config_desc) > return err; > > list_add(&config_desc->item, &cscfg_mgr->config_desc_list); > + atomic_set(&config_desc->active_cnt, 0); > return 0; > } > > @@ -468,6 +469,216 @@ void cscfg_unregister_csdev(struct coresight_device *csdev) > } > EXPORT_SYMBOL_GPL(cscfg_unregister_csdev); > > +/** > + * cscfg_csdev_reset_feats - reset features for a CoreSight device. > + * > + * Resets all parameters and register values for any features loaded > + * into @csdev to their default values. > + * > + * @csdev: The CoreSight device. > + */ > +void cscfg_csdev_reset_feats(struct coresight_device *csdev) > +{ > + struct cscfg_feature_csdev *feat_csdev; > + unsigned long flags; > + > + spin_lock_irqsave(&csdev->cscfg_csdev_lock, flags); > + if (list_empty(&csdev->feature_csdev_list)) > + goto unlock_exit; > + > + list_for_each_entry(feat_csdev, &csdev->feature_csdev_list, node) > + cscfg_reset_feat(feat_csdev); > + > +unlock_exit: > + spin_unlock_irqrestore(&csdev->cscfg_csdev_lock, flags); > +} > +EXPORT_SYMBOL_GPL(cscfg_csdev_reset_feats); > + > +/** > + * cscfg_activate_config - Mark a configuration descriptor as active. > + * > + * This will be seen when csdev devices are enabled in the system. > + * Only activated configurations can be enabled on individual devices. > + * Activation protects the configuration from alteration or removal while > + * active. > + * > + * Selection by hash value - generated from the configuration name when it > + * was loaded and added to the cs_etm/configurations file system for selection > + * by perf. > + * > + * Increments the configuration descriptor active count and the global active > + * count. > + * > + * @cfg_hash: Hash value of the selected configuration name. > + */ > +int cscfg_activate_config(unsigned long cfg_hash) > +{ > + struct cscfg_config_desc *config_desc; > + int err = -EINVAL; > + > + mutex_lock(&cscfg_mutex); > + > + list_for_each_entry(config_desc, &cscfg_mgr->config_desc_list, item) { > + if ((unsigned long)config_desc->event_ea->var == cfg_hash) { > + /* > + * increment the global active count - control changes to > + * active configurations > + */ > + atomic_inc(&cscfg_mgr->sys_active_cnt); > + > + /* > + * mark the descriptor as active so enable config on a > + * device instance will use it > + */ > + atomic_inc(&config_desc->active_cnt); > + > + err = 0; > + dev_dbg(cscfg_device(), "Activate config %s.\n", config_desc->name); > + break; > + } > + } > + mutex_unlock(&cscfg_mutex); > + > + return err; > +} > +EXPORT_SYMBOL_GPL(cscfg_activate_config); > + > +/** > + * cscfg_deactivate_config - Mark a config descriptor as inactive. > + * > + * Decrement the configuration and global active counts. > + * > + * @cfg_hash: Hash value of the selected configuration name. > + */ > +void cscfg_deactivate_config(unsigned long cfg_hash) > +{ > + struct cscfg_config_desc *config_desc; > + > + mutex_lock(&cscfg_mutex); > + > + list_for_each_entry(config_desc, &cscfg_mgr->config_desc_list, item) { > + if ((unsigned long)config_desc->event_ea->var == cfg_hash) { > + atomic_dec(&config_desc->active_cnt); > + atomic_dec(&cscfg_mgr->sys_active_cnt); > + dev_dbg(cscfg_device(), "Deactivate config %s.\n", config_desc->name); > + break; > + } > + } > + mutex_unlock(&cscfg_mutex); > +} > +EXPORT_SYMBOL_GPL(cscfg_deactivate_config); > + > +/** > + * cscfg_csdev_enable_active_config - Enable matching active configuration for device. > + * > + * Enables the configuration selected by @cfg_hash if the configuration is supported > + * on the device and has been activated. > + * > + * If active and supported the CoreSight device @csdev will be programmed with the > + * configuration, using @preset parameters. > + * > + * Should be called before driver hardware enable for the requested device, prior to > + * programming and enabling the physical hardware. > + * > + * @csdev: CoreSight device to program. > + * @cfg_hash: Selector for the configuration. > + * @preset: Preset parameter values to use, 0 for current / default values. > + */ > +int cscfg_csdev_enable_active_config(struct coresight_device *csdev, > + unsigned long cfg_hash, int preset) > +{ > + struct cscfg_config_csdev *config_csdev_active = NULL, *config_csdev_item; > + const struct cscfg_config_desc *config_desc; > + unsigned long flags; > + int err = 0; > + > + /* quickly check global count */ > + if (!atomic_read(&cscfg_mgr->sys_active_cnt)) > + return 0; > + > + /* look for matching config - set in_enable flag if found */ The second part of this comment no longer applies. > + spin_lock_irqsave(&csdev->cscfg_csdev_lock, flags); > + list_for_each_entry(config_csdev_item, &csdev->config_csdev_list, node) { > + config_desc = config_csdev_item->config_desc; > + if ((atomic_read(&config_desc->active_cnt)) && > + ((unsigned long)config_desc->event_ea->var == cfg_hash)) { > + config_csdev_active = config_csdev_item; > + csdev->active_cscfg_ctxt = (void *)config_csdev_active; > + break; > + } > + } > + spin_unlock_irqrestore(&csdev->cscfg_csdev_lock, flags); > + > + /* > + * If found, attempt to enable > + */ > + if (config_csdev_active) { > + /* > + * Call the generic routine that will program up the internal > + * driver structures prior to programming up the hardware. > + * This routine takes the driver spinlock saved in the configs. > + */ > + err = cscfg_csdev_enable_config(config_csdev_active, preset); > + if (!err) { > + /* > + * Successful programming. Check the active_cscfg_ctxt > + * pointer to ensure no pre-emption disabled it via > + * cscfg_csdev_disable_active_config() before > + * we could start. > + * > + * Set enabled if OK, err if not. > + */ > + spin_lock_irqsave(&csdev->cscfg_csdev_lock, flags); > + if (csdev->active_cscfg_ctxt) > + config_csdev_active->enabled = true; > + else > + err = -EBUSY; > + spin_unlock_irqrestore(&csdev->cscfg_csdev_lock, flags); > + } This is much better. I spent some time trying to break the heuristic and I can't. I intend to re-apply this set to give it as much exposure as possible but want to see the above comment fixed. I will do that locally though to avoid having to deal with another revision. What do you think of: /* * Look for a matching configuration - set the active configuration * context if found. */ Thanks, Mathieu > + } > + return err; > +} > +EXPORT_SYMBOL_GPL(cscfg_csdev_enable_active_config); > + > +/** > + * cscfg_csdev_disable_active_config - disable an active config on the device. > + * > + * Disables the active configuration on the CoreSight device @csdev. > + * Disable will save the values of any registers marked in the configurations > + * as save on disable. > + * > + * Should be called after driver hardware disable for the requested device, > + * after disabling the physical hardware and reading back registers. > + * > + * @csdev: The CoreSight device. > + */ > +void cscfg_csdev_disable_active_config(struct coresight_device *csdev) > +{ > + struct cscfg_config_csdev *config_csdev; > + unsigned long flags; > + > + /* > + * Check if we have an active config, and that it was successfully enabled. > + * If it was not enabled, we have no work to do, otherwise mark as disabled. > + * Clear the active config pointer. > + */ > + spin_lock_irqsave(&csdev->cscfg_csdev_lock, flags); > + config_csdev = (struct cscfg_config_csdev *)csdev->active_cscfg_ctxt; > + if (config_csdev) { > + if (!config_csdev->enabled) > + config_csdev = NULL; > + else > + config_csdev->enabled = false; > + } > + csdev->active_cscfg_ctxt = NULL; > + spin_unlock_irqrestore(&csdev->cscfg_csdev_lock, flags); > + > + /* true if there was an enabled active config */ > + if (config_csdev) > + cscfg_csdev_disable_config(config_csdev); > +} > +EXPORT_SYMBOL_GPL(cscfg_csdev_disable_active_config); > + > /* Initialise system configuration management device. */ > > struct device *cscfg_device(void) > @@ -536,6 +747,7 @@ int __init cscfg_init(void) > INIT_LIST_HEAD(&cscfg_mgr->csdev_desc_list); > INIT_LIST_HEAD(&cscfg_mgr->feat_desc_list); > INIT_LIST_HEAD(&cscfg_mgr->config_desc_list); > + atomic_set(&cscfg_mgr->sys_active_cnt, 0); > > dev_info(cscfg_device(), "CoreSight Configuration manager initialised"); > return 0; > diff --git a/drivers/hwtracing/coresight/coresight-syscfg.h b/drivers/hwtracing/coresight/coresight-syscfg.h > index 5bcae3b374c6..a52775890670 100644 > --- a/drivers/hwtracing/coresight/coresight-syscfg.h > +++ b/drivers/hwtracing/coresight/coresight-syscfg.h > @@ -24,12 +24,14 @@ > * @csdev_desc_list: List of coresight devices registered with the configuration manager. > * @feat_desc_list: List of feature descriptors to load into registered devices. > * @config_desc_list: List of system configuration descriptors to load into registered devices. > + * @sys_active_cnt: Total number of active config descriptor references. > */ > struct cscfg_manager { > struct device dev; > struct list_head csdev_desc_list; > struct list_head feat_desc_list; > struct list_head config_desc_list; > + atomic_t sys_active_cnt; > }; > > /* get reference to dev in cscfg_manager */ > @@ -61,5 +63,11 @@ int cscfg_load_config_sets(struct cscfg_config_desc **cfg_descs, > int cscfg_register_csdev(struct coresight_device *csdev, u32 match_flags, > struct cscfg_csdev_feat_ops *ops); > void cscfg_unregister_csdev(struct coresight_device *csdev); > +int cscfg_activate_config(unsigned long cfg_hash); > +void cscfg_deactivate_config(unsigned long cfg_hash); > +void cscfg_csdev_reset_feats(struct coresight_device *csdev); > +int cscfg_csdev_enable_active_config(struct coresight_device *csdev, > + unsigned long cfg_hash, int preset); > +void cscfg_csdev_disable_active_config(struct coresight_device *csdev); > > #endif /* CORESIGHT_SYSCFG_H */ > diff --git a/include/linux/coresight.h b/include/linux/coresight.h > index 16544ae2b532..93a2922b7653 100644 > --- a/include/linux/coresight.h > +++ b/include/linux/coresight.h > @@ -223,6 +223,7 @@ struct coresight_sysfs_link { > * @feature_csdev_list: List of complex feature programming added to the device. > * @config_csdev_list: List of system configurations added to the device. > * @cscfg_csdev_lock: Protect the lists of configurations and features. > + * @active_cscfg_ctxt: Context information for current active system configuration. > */ > struct coresight_device { > struct coresight_platform_data *pdata; > @@ -248,6 +249,7 @@ struct coresight_device { > struct list_head feature_csdev_list; > struct list_head config_csdev_list; > spinlock_t cscfg_csdev_lock; > + void *active_cscfg_ctxt; > }; > > /* > -- > 2.17.1 >
next prev parent reply other threads:[~2021-07-28 16:24 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-07-23 16:54 [PATCH v9 00/10] CoreSight configuration management; ETM strobing Mike Leach 2021-07-23 16:54 ` [PATCH v9 01/10] coresight: syscfg: Initial coresight system configuration Mike Leach 2021-07-23 16:54 ` [PATCH v9 02/10] coresight: syscfg: Add registration and feature loading for cs devices Mike Leach 2021-07-23 16:54 ` [PATCH v9 03/10] coresight: config: Add configuration and feature generic functions Mike Leach 2021-07-23 16:54 ` [PATCH v9 04/10] coresight: etm-perf: update to handle configuration selection Mike Leach 2021-07-23 16:54 ` [PATCH v9 05/10] coresight: syscfg: Add API to activate and enable configurations Mike Leach 2021-07-28 16:24 ` Mathieu Poirier [this message] 2021-07-28 16:41 ` Mike Leach 2021-07-29 16:14 ` Mathieu Poirier 2021-07-23 16:54 ` [PATCH v9 06/10] coresight: etm-perf: Update to activate selected configuration Mike Leach 2021-07-23 16:54 ` [PATCH v9 07/10] coresight: etm4x: Add complex configuration handlers to etmv4 Mike Leach 2021-07-23 16:54 ` [PATCH v9 08/10] coresight: config: Add preloaded configurations Mike Leach 2021-07-23 16:54 ` [PATCH v9 09/10] coresight: syscfg: Add initial configfs support Mike Leach 2021-07-23 16:54 ` [PATCH v9 10/10] Documentation: coresight: Add documentation for CoreSight config Mike Leach
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210728162409.GA2763979@p14s \ --to=mathieu.poirier@linaro.org \ --cc=alexander.shishkin@linux.intel.com \ --cc=coresight@lists.linaro.org \ --cc=gregkh@linuxfoundation.org \ --cc=leo.yan@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mike.leach@linaro.org \ --cc=suzuki.poulose@arm.com \ --cc=tingwei@codeaurora.org \ --cc=yabinc@google.com \ --subject='Re: [PATCH v9 05/10] coresight: syscfg: Add API to activate and enable configurations' \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).