linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Akhil P Oommen <akhilpo@codeaurora.org>
To: freedreno <freedreno@lists.freedesktop.org>,
	dri-devel@lists.freedesktop.org,
	OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS 
	<devicetree@vger.kernel.org>,
	linux-arm-msm@vger.kernel.org, Stephen Boyd <swboyd@chromium.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>,
	Douglas Anderson <dianders@chromium.org>,
	Rob Clark <robdclark@gmail.com>,
	Matthias Kaehlcke <mka@chromium.org>,
	Jonathan Marek <jonathan@marek.ca>,
	Andy Gross <agross@kernel.org>,
	linux-kernel@vger.kernel.org
Subject: [PATCH v3 2/2] arm64: dts: qcom: sc7280: Add gpu thermal zone cooling support
Date: Wed, 28 Jul 2021 17:24:02 +0530	[thread overview]
Message-ID: <20210728172330.v3.2.Iea8318d85a23f0167fd523ea85df5630147649f9@changeid> (raw)
In-Reply-To: <1627473242-35926-1-git-send-email-akhilpo@codeaurora.org>

From: Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org>

Add cooling-cells property and the cooling maps for the gpu thermal
zones to support GPU thermal cooling.

Signed-off-by: Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org>
Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
---

(no changes since v1)

 arch/arm64/boot/dts/qcom/sc7280.dtsi | 29 ++++++++++++++++++++++-------
 1 file changed, 22 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index c88f366..45a96d1 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -593,7 +593,7 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
-		gpu@3d00000 {
+		gpu: gpu@3d00000 {
 			compatible = "qcom,adreno-635.0", "qcom,adreno";
 			#stream-id-cells = <16>;
 			reg = <0 0x03d00000 0 0x40000>,
@@ -608,6 +608,7 @@
 			qcom,gmu = <&gmu>;
 			interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
 			interconnect-names = "gfx-mem";
+			#cooling-cells = <2>;
 
 			gpu_opp_table: opp-table {
 				compatible = "operating-points-v2";
@@ -2524,16 +2525,16 @@
 		};
 
 		gpuss0-thermal {
-			polling-delay-passive = <0>;
+			polling-delay-passive = <100>;
 			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 1>;
 
 			trips {
 				gpuss0_alert0: trip-point0 {
-					temperature = <90000>;
+					temperature = <95000>;
 					hysteresis = <2000>;
-					type = "hot";
+					type = "passive";
 				};
 
 				gpuss0_crit: gpuss0-crit {
@@ -2542,19 +2543,26 @@
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpuss0_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		gpuss1-thermal {
-			polling-delay-passive = <0>;
+			polling-delay-passive = <100>;
 			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 2>;
 
 			trips {
 				gpuss1_alert0: trip-point0 {
-					temperature = <90000>;
+					temperature = <95000>;
 					hysteresis = <2000>;
-					type = "hot";
+					type = "passive";
 				};
 
 				gpuss1_crit: gpuss1-crit {
@@ -2563,6 +2571,13 @@
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpuss1_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		nspss0-thermal {
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.


  reply	other threads:[~2021-07-28 11:54 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-28 11:54 [PATCH v3 1/2] arm64: dts: qcom: sc7280: Add gpu support Akhil P Oommen
2021-07-28 11:54 ` Akhil P Oommen [this message]
2021-07-29 17:29   ` [PATCH v3 2/2] arm64: dts: qcom: sc7280: Add gpu thermal zone cooling support Stephen Boyd
2021-07-29 17:19 ` [PATCH v3 1/2] arm64: dts: qcom: sc7280: Add gpu support Stephen Boyd
2021-07-29 17:35   ` Rob Clark
2021-07-29 17:39     ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210728172330.v3.2.Iea8318d85a23f0167fd523ea85df5630147649f9@changeid \
    --to=akhilpo@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=jonathan@marek.ca \
    --cc=jordan@cosmicpenguin.net \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=manafm@codeaurora.org \
    --cc=mka@chromium.org \
    --cc=robdclark@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=swboyd@chromium.org \
    --subject='Re: [PATCH v3 2/2] arm64: dts: qcom: sc7280: Add gpu thermal zone cooling support' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
on how to clone and mirror all data and code used for this inbox