From: Konrad Dybcio <konrad.dybcio@somainline.org>
To: ~postmarketos/upstreaming@lists.sr.ht
Cc: martin.botka@somainline.org,
angelogioacchino.delregno@somainline.org,
marijn.suijten@somainline.org, jamipkettunen@somainline.org,
Konrad Dybcio <konrad.dybcio@somainline.org>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 27/39] arm64: dts: qcom: sdm630: Configure the camera subsystem
Date: Thu, 29 Jul 2021 00:25:30 +0200 [thread overview]
Message-ID: <20210728222542.54269-28-konrad.dybcio@somainline.org> (raw)
In-Reply-To: <20210728222542.54269-1-konrad.dybcio@somainline.org>
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Add nodes for camss, cci and its pinctrl in order to bring up
camera functionality.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
arch/arm64/boot/dts/qcom/sdm630.dtsi | 215 +++++++++++++++++++++++++++
1 file changed, 215 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 5b31b594e787..1247140b6ac1 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -1032,6 +1032,32 @@ i2c8_sleep: i2c8-sleep {
bias-pull-up;
};
+ cci0_default: cci0_default {
+ pinmux {
+ pins = "gpio36","gpio37";
+ function = "cci_i2c";
+ };
+
+ pinconf {
+ pins = "gpio36","gpio37";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ cci1_default: cci1_default {
+ pinmux {
+ pins = "gpio38","gpio39";
+ function = "cci_i2c";
+ };
+
+ pinconf {
+ pins = "gpio38","gpio39";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
sdc1_state_on: sdc1-on {
clk {
pins = "sdc1_clk";
@@ -1938,6 +1964,195 @@ pil-reloc@94c {
};
};
+ camss: camss@ca00000 {
+ compatible = "qcom,sdm660-camss";
+ reg = <0x0c824000 0x1000>,
+ <0x0ca00120 0x4>,
+ <0x0c825000 0x1000>,
+ <0x0ca00124 0x4>,
+ <0x0c826000 0x1000>,
+ <0x0ca00128 0x4>,
+ <0x0ca30000 0x100>,
+ <0x0ca30400 0x100>,
+ <0x0ca30800 0x100>,
+ <0x0ca30c00 0x100>,
+ <0x0ca31000 0x500>,
+ <0x0ca00020 0x10>,
+ <0x0ca10000 0x1000>,
+ <0x0ca14000 0x1000>;
+ reg-names = "csiphy0",
+ "csiphy0_clk_mux",
+ "csiphy1",
+ "csiphy1_clk_mux",
+ "csiphy2",
+ "csiphy2_clk_mux",
+ "csid0",
+ "csid1",
+ "csid2",
+ "csid3",
+ "ispif",
+ "csi_clk_mux",
+ "vfe0",
+ "vfe1";
+ interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csid0",
+ "csid1",
+ "csid2",
+ "csid3",
+ "ispif",
+ "vfe0",
+ "vfe1";
+ clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+ <&mmcc THROTTLE_CAMSS_AXI_CLK>,
+ <&mmcc CAMSS_ISPIF_AHB_CLK>,
+ <&mmcc CAMSS_CSI0PHYTIMER_CLK>,
+ <&mmcc CAMSS_CSI1PHYTIMER_CLK>,
+ <&mmcc CAMSS_CSI2PHYTIMER_CLK>,
+ <&mmcc CAMSS_CSI0_AHB_CLK>,
+ <&mmcc CAMSS_CSI0_CLK>,
+ <&mmcc CAMSS_CPHY_CSID0_CLK>,
+ <&mmcc CAMSS_CSI0PIX_CLK>,
+ <&mmcc CAMSS_CSI0RDI_CLK>,
+ <&mmcc CAMSS_CSI1_AHB_CLK>,
+ <&mmcc CAMSS_CSI1_CLK>,
+ <&mmcc CAMSS_CPHY_CSID1_CLK>,
+ <&mmcc CAMSS_CSI1PIX_CLK>,
+ <&mmcc CAMSS_CSI1RDI_CLK>,
+ <&mmcc CAMSS_CSI2_AHB_CLK>,
+ <&mmcc CAMSS_CSI2_CLK>,
+ <&mmcc CAMSS_CPHY_CSID2_CLK>,
+ <&mmcc CAMSS_CSI2PIX_CLK>,
+ <&mmcc CAMSS_CSI2RDI_CLK>,
+ <&mmcc CAMSS_CSI3_AHB_CLK>,
+ <&mmcc CAMSS_CSI3_CLK>,
+ <&mmcc CAMSS_CPHY_CSID3_CLK>,
+ <&mmcc CAMSS_CSI3PIX_CLK>,
+ <&mmcc CAMSS_CSI3RDI_CLK>,
+ <&mmcc CAMSS_AHB_CLK>,
+ <&mmcc CAMSS_VFE0_CLK>,
+ <&mmcc CAMSS_CSI_VFE0_CLK>,
+ <&mmcc CAMSS_VFE0_AHB_CLK>,
+ <&mmcc CAMSS_VFE0_STREAM_CLK>,
+ <&mmcc CAMSS_VFE1_CLK>,
+ <&mmcc CAMSS_CSI_VFE1_CLK>,
+ <&mmcc CAMSS_VFE1_AHB_CLK>,
+ <&mmcc CAMSS_VFE1_STREAM_CLK>,
+ <&mmcc CAMSS_VFE_VBIF_AHB_CLK>,
+ <&mmcc CAMSS_VFE_VBIF_AXI_CLK>,
+ <&mmcc CSIPHY_AHB2CRIF_CLK>,
+ <&mmcc CAMSS_CPHY_CSID0_CLK>,
+ <&mmcc CAMSS_CPHY_CSID1_CLK>,
+ <&mmcc CAMSS_CPHY_CSID2_CLK>,
+ <&mmcc CAMSS_CPHY_CSID3_CLK>;
+ clock-names = "top_ahb",
+ "throttle_axi",
+ "ispif_ahb",
+ "csiphy0_timer",
+ "csiphy1_timer",
+ "csiphy2_timer",
+ "csi0_ahb",
+ "csi0",
+ "csi0_phy",
+ "csi0_pix",
+ "csi0_rdi",
+ "csi1_ahb",
+ "csi1",
+ "csi1_phy",
+ "csi1_pix",
+ "csi1_rdi",
+ "csi2_ahb",
+ "csi2",
+ "csi2_phy",
+ "csi2_pix",
+ "csi2_rdi",
+ "csi3_ahb",
+ "csi3",
+ "csi3_phy",
+ "csi3_pix",
+ "csi3_rdi",
+ "ahb",
+ "vfe0",
+ "csi_vfe0",
+ "vfe0_ahb",
+ "vfe0_stream",
+ "vfe1",
+ "csi_vfe1",
+ "vfe1_ahb",
+ "vfe1_stream",
+ "vfe_ahb",
+ "vfe_axi",
+ "csiphy_ahb2crif",
+ "cphy_csid0",
+ "cphy_csid1",
+ "cphy_csid2",
+ "cphy_csid3";
+ interconnects = <&mnoc 5 &bimc 5>;
+ interconnect-names = "vfe-mem";
+ iommus = <&mmss_smmu 0xc00>,
+ <&mmss_smmu 0xc01>,
+ <&mmss_smmu 0xc02>,
+ <&mmss_smmu 0xc03>;
+ power-domains = <&mmcc CAMSS_VFE0_GDSC>,
+ <&mmcc CAMSS_VFE1_GDSC>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ cci: cci@ca0c000 {
+ compatible = "qcom,msm8996-cci";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0ca0c000 0x1000>;
+ interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>;
+
+ assigned-clocks = <&mmcc CAMSS_CCI_AHB_CLK>,
+ <&mmcc CAMSS_CCI_CLK>;
+ assigned-clock-rates = <80800000>, <37500000>;
+ clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+ <&mmcc CAMSS_CCI_AHB_CLK>,
+ <&mmcc CAMSS_CCI_CLK>,
+ <&mmcc CAMSS_AHB_CLK>;
+ clock-names = "camss_top_ahb",
+ "cci_ahb",
+ "cci",
+ "camss_ahb";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&cci0_default &cci1_default>;
+ power-domains = <&mmcc CAMSS_TOP_GDSC>;
+ status = "disabled";
+
+ cci_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
mmss_smmu: iommu@cd00000 {
compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
reg = <0x0cd00000 0x40000>;
--
2.32.0
next prev parent reply other threads:[~2021-07-28 22:26 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20210728222542.54269-1-konrad.dybcio@somainline.org>
2021-07-28 22:25 ` [PATCH 01/39] arm64: dts: qcom: sdm630: Rewrite memory map Konrad Dybcio
2021-07-28 22:25 ` [PATCH 02/39] arm64: dts: qcom: sdm630: Add RPMPD nodes Konrad Dybcio
2021-07-28 22:25 ` [PATCH 03/39] arm64: dts: qcom: sdm630: Add MMCC node Konrad Dybcio
2021-07-28 22:25 ` [PATCH 04/39] arm64: dts: qcom: sdm630: Add interconnect provider nodes Konrad Dybcio
2021-08-10 1:02 ` Dmitry Baryshkov
2021-07-28 22:25 ` [PATCH 05/39] arm64: dts: qcom: sdm630: Add MDSS nodes Konrad Dybcio
2021-07-28 22:25 ` [PATCH 06/39] arm64: dts: qcom: sdm630: Add qfprom subnodes Konrad Dybcio
2021-07-28 22:25 ` [PATCH 07/39] arm64: dts: qcom: sdm630: Add USB configuration Konrad Dybcio
2021-07-28 22:25 ` [PATCH 08/39] arm64: dts: qcom: sdm630: Fix TLMM node and pinctrl configuration Konrad Dybcio
2021-07-28 22:25 ` [PATCH 09/39] arm64: dts: qcom: sdm630: Add SDHCI2 node Konrad Dybcio
2021-07-28 22:25 ` [PATCH 10/39] arm64: dts: qcom: sdm630: Add interconnect and opp table to sdhc_1 Konrad Dybcio
2021-07-28 22:25 ` [PATCH 11/39] arm64: dts: qcom: sdm630: Add GPU Clock Controller node Konrad Dybcio
2021-07-28 22:25 ` [PATCH 12/39] arm64: dts: qcom: sdm630: Add clocks and power domains to SMMU nodes Konrad Dybcio
2021-07-28 22:25 ` [PATCH 13/39] arm64: dts: qcom: sdm630: Add qcom,adreno-smmu compatible Konrad Dybcio
2021-07-28 22:25 ` [PATCH 14/39] arm64: dts: qcom: sdm630: Add TSENS node Konrad Dybcio
2021-07-29 10:50 ` Thara Gopinath
2021-07-29 10:52 ` Konrad Dybcio
2021-07-29 10:54 ` Thara Gopinath
2021-07-29 10:55 ` Konrad Dybcio
2021-07-29 11:14 ` Thara Gopinath
2021-07-29 13:48 ` AngeloGioacchino Del Regno
2021-08-24 15:16 ` Bjorn Andersson
2021-08-02 22:39 ` Rob Herring
2021-07-28 22:25 ` [PATCH 15/39] arm64: dts: qcom: sdm630: Add modem/ADSP SMP2P nodes Konrad Dybcio
2021-07-28 22:25 ` [PATCH 16/39] arm64: dts: qcom: sdm630: Add thermal-zones configuration Konrad Dybcio
2021-07-28 22:25 ` [PATCH 17/39] arm64: dts: qcom: sdm630: Add ADSP remoteproc configuration Konrad Dybcio
2021-07-28 22:25 ` [PATCH 18/39] arm64: dts: qcom: sdm630: Raise tcsr_mutex_regs size Konrad Dybcio
2021-07-28 22:25 ` [PATCH 19/39] arm64: dts: qcom: sdm630: Add Adreno 508 GPU configuration Konrad Dybcio
2021-07-28 22:25 ` [PATCH 20/39] arm64: dts: qcom: pm660: Support SPMI regulators on PMIC sid 1 Konrad Dybcio
2021-07-28 22:25 ` [PATCH 21/39] arm64: dts: qcom: pm660l: Add WLED support Konrad Dybcio
2021-07-28 22:25 ` [PATCH 22/39] arm64: dts: qcom: pm660l: Support SPMI regulators on PMIC sid 3 Konrad Dybcio
2021-07-28 22:25 ` [PATCH 23/39] arm64: dts: qcom: pm660(l): Add VADC and temp alarm nodes Konrad Dybcio
2021-07-28 22:25 ` [PATCH 24/39] arm64: dts: qcom: sdm660: Make the DTS an overlay on top of 630 Konrad Dybcio
2021-07-28 22:25 ` [PATCH 25/39] arm64: dts: qcom: Add device tree for SDM636 Konrad Dybcio
2021-07-28 22:25 ` [PATCH 26/39] arm64: dts: qcom: sdm630: Add IMEM node Konrad Dybcio
2021-07-28 22:25 ` Konrad Dybcio [this message]
2021-07-28 22:25 ` [PATCH 28/39] arm64: dts: qcom: sdm660: Add required nodes for DSI1 Konrad Dybcio
2021-07-28 22:25 ` [PATCH 29/39] arm64: dts: qcom: sdm630-xperia-nile: Add all RPM and fixed regulators Konrad Dybcio
2021-07-28 22:25 ` [PATCH 30/39] arm64: dts: qcom: sdm630-nile: Use &labels Konrad Dybcio
2021-07-28 22:25 ` [PATCH 31/39] arm64: dts: qcom: sdm630-nile: Add USB Konrad Dybcio
2021-07-28 22:25 ` [PATCH 32/39] arm64: dts: qcom: sdm630-nile: Add Volume up key Konrad Dybcio
2021-07-28 22:25 ` [PATCH 33/39] arm64: dts: qcom: sdm630-xperia: Retire sdm630-sony-xperia-ganges.dtsi Konrad Dybcio
2021-07-28 22:25 ` [PATCH 34/39] arm64: dts: qcom: sdm630-nile: Add Synaptics touchscreen Konrad Dybcio
2021-07-28 22:25 ` [PATCH 35/39] arm64: dts: qcom: sdm630-nile: Specify ADSP firmware name Konrad Dybcio
2021-07-28 22:25 ` [PATCH 36/39] arm64: dts: qcom: sdm630-nile: Enable uSD card slot Konrad Dybcio
2021-07-28 22:25 ` [PATCH 37/39] arm64: dts: qcom: sdm630-nile: Remove gpio-keys autorepeat Konrad Dybcio
2021-07-28 22:25 ` [PATCH 38/39] arm64: dts: qcom: sdm630: Add I2C functions to I2C pins Konrad Dybcio
2021-07-28 22:25 ` [PATCH 39/39] arm64: dts: qcom: sdm630: Add DMA to I2C hosts Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210728222542.54269-28-konrad.dybcio@somainline.org \
--to=konrad.dybcio@somainline.org \
--cc=agross@kernel.org \
--cc=angelogioacchino.delregno@somainline.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=jamipkettunen@somainline.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=martin.botka@somainline.org \
--cc=robh+dt@kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).