linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Daniel Latypov <dlatypov@google.com>
To: brendanhiggins@google.com, davidgow@google.com
Cc: linux-kernel@vger.kernel.org, kunit-dev@googlegroups.com,
	linux-kselftest@vger.kernel.org, skhan@linuxfoundation.org,
	Daniel Latypov <dlatypov@google.com>
Subject: [PATCH 1/2] kunit: tool: make --raw_output support only showing kunit output
Date: Thu, 29 Jul 2021 16:55:20 -0700	[thread overview]
Message-ID: <20210729235521.1127484-1-dlatypov@google.com> (raw)

--raw_output is nice, but it would be nicer if could show only output
after KUnit tests ahve started.

So change the flag to allow specifying a string ('kunit').
Make it so `--raw_output` alone will default to `--raw_output=all` and
have the same original behavior.

Drop the small kunit_parser.raw_output() function since it feels wrong
to put it in "kunit_parser.py" when the point of it is to not parse
anything.

E.g.

$ ./tools/testing/kunit/kunit.py run --raw_output=kunit
...
[15:24:07] Starting KUnit Kernel ...
TAP version 14
1..1
    # Subtest: example
    1..3
    # example_simple_test: initializing
    ok 1 - example_simple_test
    # example_skip_test: initializing
    # example_skip_test: You should not see a line below.
    ok 2 - example_skip_test # SKIP this test should be skipped
    # example_mark_skipped_test: initializing
    # example_mark_skipped_test: You should see a line below.
    # example_mark_skipped_test: You should see this line.
    ok 3 - example_mark_skipped_test # SKIP this test should be skipped
ok 1 - example
[15:24:10] Elapsed time: 6.487s total, 0.001s configuring, 3.510s building, 0.000s running

Signed-off-by: Daniel Latypov <dlatypov@google.com>
---
 Documentation/dev-tools/kunit/kunit-tool.rst |  9 ++++++---
 tools/testing/kunit/kunit.py                 | 20 +++++++++++++++-----
 tools/testing/kunit/kunit_parser.py          |  4 ----
 tools/testing/kunit/kunit_tool_test.py       |  9 +++++++++
 4 files changed, 30 insertions(+), 12 deletions(-)

diff --git a/Documentation/dev-tools/kunit/kunit-tool.rst b/Documentation/dev-tools/kunit/kunit-tool.rst
index c7ff9afe407a..ae52e0f489f9 100644
--- a/Documentation/dev-tools/kunit/kunit-tool.rst
+++ b/Documentation/dev-tools/kunit/kunit-tool.rst
@@ -114,9 +114,12 @@ results in TAP format, you can pass the ``--raw_output`` argument.
 
 	./tools/testing/kunit/kunit.py run --raw_output
 
-.. note::
-	The raw output from test runs may contain other, non-KUnit kernel log
-	lines.
+The raw output from test runs may contain other, non-KUnit kernel log
+lines. You can see just KUnit output with ``--raw_output=kunit``:
+
+.. code-block:: bash
+
+	./tools/testing/kunit/kunit.py run --raw_output=kunit
 
 If you have KUnit results in their raw TAP format, you can parse them and print
 the human-readable summary with the ``parse`` command for kunit_tool. This
diff --git a/tools/testing/kunit/kunit.py b/tools/testing/kunit/kunit.py
index 7174377c2172..5a931456e718 100755
--- a/tools/testing/kunit/kunit.py
+++ b/tools/testing/kunit/kunit.py
@@ -16,6 +16,7 @@ assert sys.version_info >= (3, 7), "Python version is too old"
 
 from collections import namedtuple
 from enum import Enum, auto
+from typing import Iterable
 
 import kunit_config
 import kunit_json
@@ -114,7 +115,16 @@ def parse_tests(request: KunitParseRequest) -> KunitResult:
 					      'Tests not Parsed.')
 
 	if request.raw_output:
-		kunit_parser.raw_output(request.input_data)
+		output: Iterable[str] = request.input_data
+		if request.raw_output == 'all':
+			pass
+		elif request.raw_output == 'kunit':
+			output = kunit_parser.extract_tap_lines(output)
+		else:
+			print(f'Unknown --raw_output option "{request.raw_output}"', file=sys.stderr)
+		for line in output:
+			print(line.rstrip())
+
 	else:
 		test_result = kunit_parser.parse_run_tests(request.input_data)
 	parse_end = time.time()
@@ -135,7 +145,6 @@ def parse_tests(request: KunitParseRequest) -> KunitResult:
 	return KunitResult(KunitStatus.SUCCESS, test_result,
 				parse_end - parse_start)
 
-
 def run_tests(linux: kunit_kernel.LinuxSourceTree,
 	      request: KunitRequest) -> KunitResult:
 	run_start = time.time()
@@ -181,7 +190,7 @@ def add_common_opts(parser) -> None:
 	parser.add_argument('--build_dir',
 			    help='As in the make command, it specifies the build '
 			    'directory.',
-                            type=str, default='.kunit', metavar='build_dir')
+			    type=str, default='.kunit', metavar='build_dir')
 	parser.add_argument('--make_options',
 			    help='X=Y make option, can be repeated.',
 			    action='append')
@@ -246,8 +255,9 @@ def add_exec_opts(parser) -> None:
 			     action='append')
 
 def add_parse_opts(parser) -> None:
-	parser.add_argument('--raw_output', help='don\'t format output from kernel',
-			    action='store_true')
+	parser.add_argument('--raw_output', help='If set don\'t format output from kernel. '
+			    'If set to --raw_output=kunit, filters to just KUnit output.',
+			    type=str, nargs='?', const='all', default=None)
 	parser.add_argument('--json',
 			    nargs='?',
 			    help='Stores test results in a JSON, and either '
diff --git a/tools/testing/kunit/kunit_parser.py b/tools/testing/kunit/kunit_parser.py
index b88db3f51dc5..84938fefbac0 100644
--- a/tools/testing/kunit/kunit_parser.py
+++ b/tools/testing/kunit/kunit_parser.py
@@ -106,10 +106,6 @@ def extract_tap_lines(kernel_output: Iterable[str]) -> LineStream:
 				yield line_num, line[prefix_len:]
 	return LineStream(lines=isolate_kunit_output(kernel_output))
 
-def raw_output(kernel_output) -> None:
-	for line in kernel_output:
-		print(line.rstrip())
-
 DIVIDER = '=' * 60
 
 RESET = '\033[0;0m'
diff --git a/tools/testing/kunit/kunit_tool_test.py b/tools/testing/kunit/kunit_tool_test.py
index 628ab00f74bc..619c4554cbff 100755
--- a/tools/testing/kunit/kunit_tool_test.py
+++ b/tools/testing/kunit/kunit_tool_test.py
@@ -399,6 +399,15 @@ class KUnitMainTest(unittest.TestCase):
 			self.assertNotEqual(call, mock.call(StrContains('Testing complete.')))
 			self.assertNotEqual(call, mock.call(StrContains(' 0 tests run')))
 
+	def test_run_raw_output_kunit(self):
+		self.linux_source_mock.run_kernel = mock.Mock(return_value=[])
+		kunit.main(['run', '--raw_output=kunit'], self.linux_source_mock)
+		self.assertEqual(self.linux_source_mock.build_reconfig.call_count, 1)
+		self.assertEqual(self.linux_source_mock.run_kernel.call_count, 1)
+		for call in self.print_mock.call_args_list:
+			self.assertNotEqual(call, mock.call(StrContains('Testing complete.')))
+			self.assertNotEqual(call, mock.call(StrContains(' 0 tests run')))
+
 	def test_exec_timeout(self):
 		timeout = 3453
 		kunit.main(['exec', '--timeout', str(timeout)], self.linux_source_mock)

base-commit: f684616e08e9cd9db3cd53fe2e068dfe02481657
-- 
2.32.0.554.ge1b32706d8-goog


             reply	other threads:[~2021-07-29 23:55 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-29 23:55 Daniel Latypov [this message]
2021-07-29 23:55 ` [PATCH 2/2] kunit: add 'kunit.action' param to allow listing out tests Daniel Latypov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210729235521.1127484-1-dlatypov@google.com \
    --to=dlatypov@google.com \
    --cc=brendanhiggins@google.com \
    --cc=davidgow@google.com \
    --cc=kunit-dev@googlegroups.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-kselftest@vger.kernel.org \
    --cc=skhan@linuxfoundation.org \
    --subject='Re: [PATCH 1/2] kunit: tool: make --raw_output support only showing kunit output' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
on how to clone and mirror all data and code used for this inbox