linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jiashuo Liang <liangjs@pku.edu.cn>
To: Dave Hansen <dave.hansen@linux.intel.com>,
	Andy Lutomirski <luto@kernel.org>,
	Peter Zijlstra <peterz@infradead.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
	x86@kernel.org, "H. Peter Anvin" <hpa@zytor.com>
Cc: linux-kernel@vger.kernel.org, Jiashuo Liang <liangjs@pku.edu.cn>
Subject: [PATCH v2] x86/fault: Fix wrong signal when vsyscall fails with pkey
Date: Fri, 30 Jul 2021 11:01:52 +0800	[thread overview]
Message-ID: <20210730030152.249106-1-liangjs@pku.edu.cn> (raw)

The function __bad_area_nosemaphore() calls kernelmode_fixup_or_oops() with
parameter "signal" being "pkey", which will send a signal numbered "pkey".

This bug appears when the kernel fail to access user-given memory pages
that are protected by pkey, so it can go through the do_user_addr_fault()
path and pass the !user_mode() check in __bad_area_nosemaphore(). Most
cases will simply run the kernel fixup code to make an -EFAULT. But when
another condition current->thread.sig_on_uaccess_err is met, which is
only used to emulate vsyscall, we will generate the wrong signal.

A new parameter "pkey" is added to kernelmode_fixup_or_oops() to fix it.

Fixes: 5042d40a264c ("x86/fault: Bypass no_context() for implicit kernel faults from usermode")
Signed-off-by: Jiashuo Liang <liangjs@pku.edu.cn>
---

Changes in v2:
  - Use ARCH_DEFAULT_PKEY instead of 0 for unused pkey parameter.

 arch/x86/mm/fault.c | 26 ++++++++++++++++++--------
 1 file changed, 18 insertions(+), 8 deletions(-)

diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index b2eefdefc108..84a2c8c4af73 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -710,7 +710,8 @@ page_fault_oops(struct pt_regs *regs, unsigned long error_code,
 
 static noinline void
 kernelmode_fixup_or_oops(struct pt_regs *regs, unsigned long error_code,
-			 unsigned long address, int signal, int si_code)
+			 unsigned long address, int signal, int si_code,
+			 u32 pkey)
 {
 	WARN_ON_ONCE(user_mode(regs));
 
@@ -735,8 +736,12 @@ kernelmode_fixup_or_oops(struct pt_regs *regs, unsigned long error_code,
 
 			set_signal_archinfo(address, error_code);
 
-			/* XXX: hwpoison faults will set the wrong code. */
-			force_sig_fault(signal, si_code, (void __user *)address);
+			if (si_code == SEGV_PKUERR) {
+				force_sig_pkuerr((void __user *)address, pkey);
+			} else {
+				/* XXX: hwpoison faults will set the wrong code. */
+				force_sig_fault(signal, si_code, (void __user *)address);
+			}
 		}
 
 		/*
@@ -798,7 +803,8 @@ __bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code,
 	struct task_struct *tsk = current;
 
 	if (!user_mode(regs)) {
-		kernelmode_fixup_or_oops(regs, error_code, address, pkey, si_code);
+		kernelmode_fixup_or_oops(regs, error_code, address,
+					 SIGSEGV, si_code, pkey);
 		return;
 	}
 
@@ -930,7 +936,8 @@ do_sigbus(struct pt_regs *regs, unsigned long error_code, unsigned long address,
 {
 	/* Kernel mode? Handle exceptions or die: */
 	if (!user_mode(regs)) {
-		kernelmode_fixup_or_oops(regs, error_code, address, SIGBUS, BUS_ADRERR);
+		kernelmode_fixup_or_oops(regs, error_code, address,
+					 SIGBUS, BUS_ADRERR, ARCH_DEFAULT_PKEY);
 		return;
 	}
 
@@ -1396,7 +1403,8 @@ void do_user_addr_fault(struct pt_regs *regs,
 		 */
 		if (!user_mode(regs))
 			kernelmode_fixup_or_oops(regs, error_code, address,
-						 SIGBUS, BUS_ADRERR);
+						 SIGBUS, BUS_ADRERR,
+						 ARCH_DEFAULT_PKEY);
 		return;
 	}
 
@@ -1416,7 +1424,8 @@ void do_user_addr_fault(struct pt_regs *regs,
 		return;
 
 	if (fatal_signal_pending(current) && !user_mode(regs)) {
-		kernelmode_fixup_or_oops(regs, error_code, address, 0, 0);
+		kernelmode_fixup_or_oops(regs, error_code, address,
+					 0, 0, ARCH_DEFAULT_PKEY);
 		return;
 	}
 
@@ -1424,7 +1433,8 @@ void do_user_addr_fault(struct pt_regs *regs,
 		/* Kernel mode? Handle exceptions or die: */
 		if (!user_mode(regs)) {
 			kernelmode_fixup_or_oops(regs, error_code, address,
-						 SIGSEGV, SEGV_MAPERR);
+						 SIGSEGV, SEGV_MAPERR,
+						 ARCH_DEFAULT_PKEY);
 			return;
 		}
 
-- 
2.32.0


             reply	other threads:[~2021-07-30  3:03 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-30  3:01 Jiashuo Liang [this message]
2021-08-23 14:55 ` Dave Hansen
2021-09-19  4:39   ` Jiashuo Liang
2021-09-20 10:42 ` [tip: x86/urgent] " tip-bot2 for Jiashuo Liang
2021-09-20 14:43   ` Borislav Petkov
2021-09-20 20:37 ` tip-bot2 for Jiashuo Liang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210730030152.249106-1-liangjs@pku.edu.cn \
    --to=liangjs@pku.edu.cn \
    --cc=bp@alien8.de \
    --cc=dave.hansen@linux.intel.com \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luto@kernel.org \
    --cc=mingo@redhat.com \
    --cc=peterz@infradead.org \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    --subject='Re: [PATCH v2] x86/fault: Fix wrong signal when vsyscall fails with pkey' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
on how to clone and mirror all data and code used for this inbox