linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Juergen Gross <jgross@suse.com>
To: xen-devel@lists.xenproject.org, linux-block@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: "Juergen Gross" <jgross@suse.com>,
	"Boris Ostrovsky" <boris.ostrovsky@oracle.com>,
	"Stefano Stabellini" <sstabellini@kernel.org>,
	"Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com>,
	"Roger Pau Monné" <roger.pau@citrix.com>,
	"Jens Axboe" <axboe@kernel.dk>, "Jan Beulich" <jbeulich@suse.com>
Subject: [PATCH v3 1/3] xen/blkfront: read response from backend only once
Date: Fri, 30 Jul 2021 12:38:52 +0200	[thread overview]
Message-ID: <20210730103854.12681-2-jgross@suse.com> (raw)
In-Reply-To: <20210730103854.12681-1-jgross@suse.com>

In order to avoid problems in case the backend is modifying a response
on the ring page while the frontend has already seen it, just read the
response into a local buffer in one go and then operate on that buffer
only.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
---
 drivers/block/xen-blkfront.c | 35 ++++++++++++++++++-----------------
 1 file changed, 18 insertions(+), 17 deletions(-)

diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index d83fee21f6c5..15e840287734 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -1496,7 +1496,7 @@ static bool blkif_completion(unsigned long *id,
 static irqreturn_t blkif_interrupt(int irq, void *dev_id)
 {
 	struct request *req;
-	struct blkif_response *bret;
+	struct blkif_response bret;
 	RING_IDX i, rp;
 	unsigned long flags;
 	struct blkfront_ring_info *rinfo = (struct blkfront_ring_info *)dev_id;
@@ -1513,8 +1513,9 @@ static irqreturn_t blkif_interrupt(int irq, void *dev_id)
 	for (i = rinfo->ring.rsp_cons; i != rp; i++) {
 		unsigned long id;
 
-		bret = RING_GET_RESPONSE(&rinfo->ring, i);
-		id   = bret->id;
+		RING_COPY_RESPONSE(&rinfo->ring, i, &bret);
+		id = bret.id;
+
 		/*
 		 * The backend has messed up and given us an id that we would
 		 * never have given to it (we stamp it up to BLK_RING_SIZE -
@@ -1522,39 +1523,39 @@ static irqreturn_t blkif_interrupt(int irq, void *dev_id)
 		 */
 		if (id >= BLK_RING_SIZE(info)) {
 			WARN(1, "%s: response to %s has incorrect id (%ld)\n",
-			     info->gd->disk_name, op_name(bret->operation), id);
+			     info->gd->disk_name, op_name(bret.operation), id);
 			/* We can't safely get the 'struct request' as
 			 * the id is busted. */
 			continue;
 		}
 		req  = rinfo->shadow[id].request;
 
-		if (bret->operation != BLKIF_OP_DISCARD) {
+		if (bret.operation != BLKIF_OP_DISCARD) {
 			/*
 			 * We may need to wait for an extra response if the
 			 * I/O request is split in 2
 			 */
-			if (!blkif_completion(&id, rinfo, bret))
+			if (!blkif_completion(&id, rinfo, &bret))
 				continue;
 		}
 
 		if (add_id_to_freelist(rinfo, id)) {
 			WARN(1, "%s: response to %s (id %ld) couldn't be recycled!\n",
-			     info->gd->disk_name, op_name(bret->operation), id);
+			     info->gd->disk_name, op_name(bret.operation), id);
 			continue;
 		}
 
-		if (bret->status == BLKIF_RSP_OKAY)
+		if (bret.status == BLKIF_RSP_OKAY)
 			blkif_req(req)->error = BLK_STS_OK;
 		else
 			blkif_req(req)->error = BLK_STS_IOERR;
 
-		switch (bret->operation) {
+		switch (bret.operation) {
 		case BLKIF_OP_DISCARD:
-			if (unlikely(bret->status == BLKIF_RSP_EOPNOTSUPP)) {
+			if (unlikely(bret.status == BLKIF_RSP_EOPNOTSUPP)) {
 				struct request_queue *rq = info->rq;
 				printk(KERN_WARNING "blkfront: %s: %s op failed\n",
-					   info->gd->disk_name, op_name(bret->operation));
+					   info->gd->disk_name, op_name(bret.operation));
 				blkif_req(req)->error = BLK_STS_NOTSUPP;
 				info->feature_discard = 0;
 				info->feature_secdiscard = 0;
@@ -1564,15 +1565,15 @@ static irqreturn_t blkif_interrupt(int irq, void *dev_id)
 			break;
 		case BLKIF_OP_FLUSH_DISKCACHE:
 		case BLKIF_OP_WRITE_BARRIER:
-			if (unlikely(bret->status == BLKIF_RSP_EOPNOTSUPP)) {
+			if (unlikely(bret.status == BLKIF_RSP_EOPNOTSUPP)) {
 				printk(KERN_WARNING "blkfront: %s: %s op failed\n",
-				       info->gd->disk_name, op_name(bret->operation));
+				       info->gd->disk_name, op_name(bret.operation));
 				blkif_req(req)->error = BLK_STS_NOTSUPP;
 			}
-			if (unlikely(bret->status == BLKIF_RSP_ERROR &&
+			if (unlikely(bret.status == BLKIF_RSP_ERROR &&
 				     rinfo->shadow[id].req.u.rw.nr_segments == 0)) {
 				printk(KERN_WARNING "blkfront: %s: empty %s op failed\n",
-				       info->gd->disk_name, op_name(bret->operation));
+				       info->gd->disk_name, op_name(bret.operation));
 				blkif_req(req)->error = BLK_STS_NOTSUPP;
 			}
 			if (unlikely(blkif_req(req)->error)) {
@@ -1585,9 +1586,9 @@ static irqreturn_t blkif_interrupt(int irq, void *dev_id)
 			fallthrough;
 		case BLKIF_OP_READ:
 		case BLKIF_OP_WRITE:
-			if (unlikely(bret->status != BLKIF_RSP_OKAY))
+			if (unlikely(bret.status != BLKIF_RSP_OKAY))
 				dev_dbg(&info->xbdev->dev, "Bad return from blkdev data "
-					"request: %x\n", bret->status);
+					"request: %x\n", bret.status);
 
 			break;
 		default:
-- 
2.26.2


  reply	other threads:[~2021-07-30 10:39 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-30 10:38 [PATCH v3 0/3] xen: harden blkfront against malicious backends Juergen Gross
2021-07-30 10:38 ` Juergen Gross [this message]
2021-08-02 14:06   ` [PATCH v3 1/3] xen/blkfront: read response from backend only once Oleksandr Andrushchenko
2021-08-02 19:26     ` Julien Grall
2021-08-03  7:00       ` Oleksandr Andrushchenko
2021-07-30 10:38 ` [PATCH v3 2/3] xen/blkfront: don't take local copy of a request from the ring page Juergen Gross
2021-09-10 10:14   ` Marek Marczykowski-Górecki
2021-09-10 10:36     ` Juergen Gross
2021-07-30 10:38 ` [PATCH v3 3/3] xen/blkfront: don't trust the backend response data blindly Juergen Gross
2021-08-30 10:16 ` [PATCH v3 0/3] xen: harden blkfront against malicious backends Juergen Gross

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210730103854.12681-2-jgross@suse.com \
    --to=jgross@suse.com \
    --cc=axboe@kernel.dk \
    --cc=boris.ostrovsky@oracle.com \
    --cc=jbeulich@suse.com \
    --cc=konrad.wilk@oracle.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=roger.pau@citrix.com \
    --cc=sstabellini@kernel.org \
    --cc=xen-devel@lists.xenproject.org \
    --subject='Re: [PATCH v3 1/3] xen/blkfront: read response from backend only once' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).