linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andre Przywara <andre.przywara@arm.com>
To: Bert Vermeulen <bert@biot.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>,
	soc@kernel.org, Rob Herring <robh+dt@kernel.org>,
	John Crispin <john@phrozen.org>, Felix Fietkau <nbd@nbd.name>,
	Marc Zyngier <maz@kernel.org>
Subject: Re: [PATCH 3/5] ARM: dts: Add basic support for EcoNet EN7523
Date: Fri, 30 Jul 2021 17:47:04 +0100	[thread overview]
Message-ID: <20210730174704.48c9a94f@slackpad.fritz.box> (raw)
In-Reply-To: <20210730134552.853350-4-bert@biot.com>

On Fri, 30 Jul 2021 15:45:50 +0200
Bert Vermeulen <bert@biot.com> wrote:

Hi,

> From: John Crispin <john@phrozen.org>
> 
> Add basic support for EcoNet EN7523, enough for booting to console.
> 
> The UART is basically 8250-compatible, except for the clock selection.
> A clock-frequency value is synthesized to get this to run at 115200 bps.
> 
> Signed-off-by: John Crispin <john@phrozen.org>
> Signed-off-by: Bert Vermeulen <bert@biot.com>
> ---
>  arch/arm/boot/dts/Makefile       |   2 +
>  arch/arm/boot/dts/en7523-evb.dts |  17 ++++
>  arch/arm/boot/dts/en7523.dtsi    | 128 +++++++++++++++++++++++++++++++
>  3 files changed, 147 insertions(+)
>  create mode 100644 arch/arm/boot/dts/en7523-evb.dts
>  create mode 100644 arch/arm/boot/dts/en7523.dtsi
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 863347b6b65e..3eeb7715c6ce 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -174,6 +174,8 @@ dtb-$(CONFIG_ARCH_DAVINCI) += \
>  	da850-lego-ev3.dtb
>  dtb-$(CONFIG_ARCH_DIGICOLOR) += \
>  	cx92755_equinox.dtb
> +dtb-$(CONFIG_ARCH_ECONET) += \
> +	en7523-evb.dtb
>  dtb-$(CONFIG_ARCH_EXYNOS3) += \
>  	exynos3250-artik5-eval.dtb \
>  	exynos3250-monk.dtb \
> diff --git a/arch/arm/boot/dts/en7523-evb.dts b/arch/arm/boot/dts/en7523-evb.dts
> new file mode 100644
> index 000000000000..c5b75eb3715e
> --- /dev/null
> +++ b/arch/arm/boot/dts/en7523-evb.dts
> @@ -0,0 +1,17 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/dts-v1/;
> +#include "en7523.dtsi"
> +
> +/ {
> +	model = "Econet EN7523 Evaluation Board";
> +	compatible = "econet,en7523-evb", "econet,en7523";
> +
> +	aliases {
> +		serial0 = &uart1;
> +	};
> +
> +	chosen {
> +		bootargs = "earlycon=uart8250,mmio32,0x1fbf0000 console=ttyS0,115200";
> +		stdout-path = "serial0:115200n8";
> +	};
> +};
> diff --git a/arch/arm/boot/dts/en7523.dtsi b/arch/arm/boot/dts/en7523.dtsi
> new file mode 100644
> index 000000000000..f4fe1c6f66e8
> --- /dev/null
> +++ b/arch/arm/boot/dts/en7523.dtsi
> @@ -0,0 +1,128 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> +	interrupt-parent = <&gic>;
> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +
> +	reserved-memory {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;
> +
> +		npu_binary@84000000 {
> +			no-map;
> +			reg = <0x84000000 0xA00000>;
> +		};
> +
> +		npu_flag@84B0000 {
> +			no-map;
> +			reg = <0x84B00000 0x100000>;
> +		};
> +
> +		npu_pkt@85000000 {
> +			no-map;
> +			reg = <0x85000000 0x1A00000>;
> +		};
> +
> +		npu_phyaddr@86B00000 {
> +			no-map;
> +			reg = <0x86B00000 0x100000>;
> +		};
> +
> +		npu_rxdesc@86D00000 {
> +			no-map;
> +			reg = <0x86D00000 0x100000>;
> +		};
> +	};
> +
> +	psci {
> +		compatible = "arm,psci-0.2";
> +		method = "smc";
> +	};
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		cpu-map {
> +			cluster0 {
> +				core0 {
> +					cpu = <&cpu0>;
> +				};
> +				core1 {
> +					cpu = <&cpu1>;
> +				};
> +			};
> +		};
> +
> +		cpu0: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a7";
> +			reg = <0x0>;
> +			enable-method = "psci";
> +			clock-frequency = <80000000>;
> +			next-level-cache = <&L2_0>;
> +
> +		};
> +
> +		cpu1: cpu@1 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a7";
> +			reg = <0x1>;
> +			enable-method = "psci";
> +			clock-frequency = <80000000>;
> +			next-level-cache = <&L2_0>;
> +		};
> +
> +		L2_0: l2-cache0 {
> +			compatible = "cache";
> +		};
> +	};
> +
> +	gic: interrupt-controller@09000000 {

Please no leading zeros behind the '@', dtc should warn about this.

> +		compatible = "arm,gic-v3";
> +		interrupt-controller;
> +		#interrupt-cells = <3>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		reg = <0x09000000 0x20000>,

Mmh, 128K for the distributor, is that actually right? Is that to cover
some GIC-500 MBI aliases? I don't think we announce this in the DT,
though?

> +			  <0x09080000 0x80000>;

So this offset and length suggests there are four cores? Is that a
mistake or are there two more cores, that are possibly hidden? 

> +		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
> +
> +		its: gic-its@09020000 {

Another leading zero.

Cheers,
Andre


> +			compatible = "arm,gic-v3-its";
> +			msi-controller;
> +			#msi-cell = <1>;
> +			reg = <0x090200000 0x20000>;
> +		};
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupt-parent = <&gic>;
> +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> +		clock-frequency = <25000000>;
> +	};
> +
> +	memory@80000000 {
> +		device_type = "memory";
> +		reg = <0x80000000 0x40000000>;
> +	};
> +
> +	uart1: serial@1fbf0000 {
> +		compatible = "ns8250";
> +		reg = <0x1fbf0000 0x30>;
> +		reg-io-width = <4>;
> +		reg-shift = <2>;
> +		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
> +		clock-frequency = <1843200>;
> +		status = "okay";
> +	};
> +};


  parent reply	other threads:[~2021-07-30 16:47 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-30 13:45 [PATCH 0/4] Add support for EcoNet EN7523 SoC Bert Vermeulen
2021-07-30 13:45 ` [PATCH 1/5] dt-bindings: Add vendor prefix for EcoNet Bert Vermeulen
2021-08-06 21:02   ` Rob Herring
2021-07-30 13:45 ` [PATCH 2/5] dt-bindings: arm: econet: Add binding for EN7523 SoC and EVB Bert Vermeulen
2021-08-06 21:04   ` Rob Herring
2021-07-30 13:45 ` [PATCH 3/5] ARM: dts: Add basic support for EcoNet EN7523 Bert Vermeulen
2021-07-30 14:31   ` Linus Walleij
     [not found]     ` <87y29n26po.wl-maz@kernel.org>
2021-08-01  9:07       ` Bert Vermeulen
2021-08-01  9:40         ` Arnd Bergmann
2021-07-30 14:45   ` Daniel Palmer
2021-07-30 14:46   ` Mark Rutland
2021-08-04 16:41     ` Bert Vermeulen
2021-08-06 20:59       ` Rob Herring
2021-07-30 14:59   ` Mark Rutland
2021-08-06 20:52     ` Rob Herring
2021-07-30 16:47   ` Andre Przywara [this message]
2021-07-30 13:45 ` [PATCH 4/5] ARM: Add basic support for EcoNet EN7523 SoC Bert Vermeulen
2021-07-30 14:48   ` Arnd Bergmann
2021-07-30 15:15     ` John Crispin
2021-07-30 16:55       ` Arnd Bergmann
2021-08-01 16:44     ` Ard Biesheuvel
2021-09-03 16:20       ` Felix Fietkau
2021-09-03 17:47         ` Ard Biesheuvel
2021-08-04 16:43     ` Bert Vermeulen
2021-08-09 12:46       ` Geert Uytterhoeven
2021-08-09 12:49         ` Ard Biesheuvel
2021-08-09 13:00         ` Bert Vermeulen
2021-07-30 13:45 ` [PATCH 5/5] ARM: multi_v7_defconfig: Add " Bert Vermeulen
2021-07-30 14:26 ` [PATCH 0/4] " Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210730174704.48c9a94f@slackpad.fritz.box \
    --to=andre.przywara@arm.com \
    --cc=arnd@arndb.de \
    --cc=bert@biot.com \
    --cc=devicetree@vger.kernel.org \
    --cc=john@phrozen.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maz@kernel.org \
    --cc=nbd@nbd.name \
    --cc=olof@lixom.net \
    --cc=robh+dt@kernel.org \
    --cc=soc@kernel.org \
    --subject='Re: [PATCH 3/5] ARM: dts: Add basic support for EcoNet EN7523' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).