* [PATCH v6 0/2] iio: accel: add support for ADXL355 @ 2021-07-28 6:34 Puranjay Mohan 2021-07-28 6:34 ` [PATCH v6 1/2] dt-bindings: iio: accel: Add DT binding doc " Puranjay Mohan 2021-07-28 6:34 ` [PATCH v6 2/2] iio: accel: Add driver support " Puranjay Mohan 0 siblings, 2 replies; 5+ messages in thread From: Puranjay Mohan @ 2021-07-28 6:34 UTC (permalink / raw) To: Michael.Hennerich, alexandru.ardelean, jic23, devicetree, linux-iio, linux-kernel, lars, Dragos.Bogdan, Darius.Berghe Cc: Puranjay Mohan Add the dt-bindings and the driver for ADXL355 3-axis MEMS Accelerometer. Changes since v5: 1. Used get_unaligned_be24() and get_unaligned_be16() to parse acceleration and temperature data. This solves sparse errors and also make the code more understandable. Changes since v4: 1. Fix errors reported by sparse. Changes since v3: 1. Fix errors in yaml DT doc. 2. Change SPDX-License-Identifier to GPL-2.0-only OR BSD-2-Clause Changes since v2: 1. Add separate DT binding doc in yaml. 2. Use ____cacheline_aligned buffer for regmap_bulk_read/write calls. 3. Make code consistent by using same style in switch case. 4. Use FIELD_PREP in place of custom macros. 5. Make Kconfig description more informative. Changes since v1: 1. Remove the declarations for static regmap structures from adxl355.h. This was missed in the v1 and caused errors. 2. Make switch case statements consistent by directly returning from each case rather than saving the return in a variable. 3. Some coding style changes. Changes since v0: 1. Move adxl355_hpf_3db_table to adxl355_data structure. This is done to make sure that each device gets its own table. 2. Make local regmap definitions private to adxl355_core.c. 3. Other minor coding style changes. Puranjay Mohan (2): dt-bindings: iio: accel: Add DT binding doc for ADXL355 iio: accel: Add driver support for ADXL355 .../bindings/iio/accel/adi,adxl355.yaml | 76 +++ MAINTAINERS | 7 + drivers/iio/accel/Kconfig | 29 + drivers/iio/accel/Makefile | 3 + drivers/iio/accel/adxl355.h | 77 +++ drivers/iio/accel/adxl355_core.c | 542 ++++++++++++++++++ drivers/iio/accel/adxl355_i2c.c | 63 ++ drivers/iio/accel/adxl355_spi.c | 66 +++ 8 files changed, 863 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml create mode 100644 drivers/iio/accel/adxl355.h create mode 100644 drivers/iio/accel/adxl355_core.c create mode 100644 drivers/iio/accel/adxl355_i2c.c create mode 100644 drivers/iio/accel/adxl355_spi.c -- 2.30.1 ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v6 1/2] dt-bindings: iio: accel: Add DT binding doc for ADXL355 2021-07-28 6:34 [PATCH v6 0/2] iio: accel: add support for ADXL355 Puranjay Mohan @ 2021-07-28 6:34 ` Puranjay Mohan 2021-07-31 15:08 ` Jonathan Cameron 2021-07-28 6:34 ` [PATCH v6 2/2] iio: accel: Add driver support " Puranjay Mohan 1 sibling, 1 reply; 5+ messages in thread From: Puranjay Mohan @ 2021-07-28 6:34 UTC (permalink / raw) To: Michael.Hennerich, alexandru.ardelean, jic23, devicetree, linux-iio, linux-kernel, lars, Dragos.Bogdan, Darius.Berghe Cc: Puranjay Mohan Add devicetree binding document for ADXL355, a 3-Axis MEMS Accelerometer. Signed-off-by: Puranjay Mohan <puranjay12@gmail.com> --- .../bindings/iio/accel/adi,adxl355.yaml | 76 +++++++++++++++++++ 1 file changed, 76 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml new file mode 100644 index 000000000..6e0652ce8 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/adi,adxl355.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADXL355 3-Axis, Low noise MEMS Accelerometer + +maintainers: + - Puranjay Mohan <puranjay12@gmail.com> + +description: | + Analog Devices ADXL355 3-Axis, Low noise MEMS Accelerometer that supports + both I2C & SPI interfaces + https://www.analog.com/en/products/adxl355.html + +properties: + compatible: + enum: + - adi,adxl355 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + items: + - description: DRDY PIN + - description: INT1 PIN + - description: INT2 PIN + + vdd-supply: + description: Regulator that provides power to the sensor + + vddio-supply: + description: Regulator that provides power to the bus + + spi-max-frequency: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + /* Example for a I2C device node */ + accelerometer@1d { + compatible = "adi,adxl355"; + reg = <0x1d>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; + }; + }; + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + accelerometer@0 { + compatible = "adi,adxl355"; + reg = <0>; + spi-max-frequency = <1000000>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; + }; + }; -- 2.30.1 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v6 1/2] dt-bindings: iio: accel: Add DT binding doc for ADXL355 2021-07-28 6:34 ` [PATCH v6 1/2] dt-bindings: iio: accel: Add DT binding doc " Puranjay Mohan @ 2021-07-31 15:08 ` Jonathan Cameron 0 siblings, 0 replies; 5+ messages in thread From: Jonathan Cameron @ 2021-07-31 15:08 UTC (permalink / raw) To: Puranjay Mohan Cc: Michael.Hennerich, alexandru.ardelean, devicetree, linux-iio, linux-kernel, lars, Dragos.Bogdan, Darius.Berghe On Wed, 28 Jul 2021 12:04:29 +0530 Puranjay Mohan <puranjay12@gmail.com> wrote: > Add devicetree binding document for ADXL355, a 3-Axis MEMS Accelerometer. > > Signed-off-by: Puranjay Mohan <puranjay12@gmail.com> Hi Puranjay, Biggest comment in here is we should look to make the interrupt description more flexible. Board designers have an annoying habit of only wiring some of the interrupts and not always the ones we would expect. Jonathan > --- > .../bindings/iio/accel/adi,adxl355.yaml | 76 +++++++++++++++++++ > 1 file changed, 76 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml > > diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml > new file mode 100644 > index 000000000..6e0652ce8 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml > @@ -0,0 +1,76 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/accel/adi,adxl355.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Analog Devices ADXL355 3-Axis, Low noise MEMS Accelerometer > + > +maintainers: > + - Puranjay Mohan <puranjay12@gmail.com> > + > +description: | > + Analog Devices ADXL355 3-Axis, Low noise MEMS Accelerometer that supports > + both I2C & SPI interfaces > + https://www.analog.com/en/products/adxl355.html > + > +properties: > + compatible: > + enum: > + - adi,adxl355 > + > + reg: > + maxItems: 1 > + > + interrupts: > + minItems: 1 > + items: > + - description: DRDY PIN > + - description: INT1 PIN > + - description: INT2 PIN Given there are 3 interrupts, and the device can work fine with only a subset actually wired up, the interrupt-names property should be used to allow the driver to figure out which ones are specified and we should allow any combination. > + > + vdd-supply: > + description: Regulator that provides power to the sensor > + > + vddio-supply: > + description: Regulator that provides power to the bus > + > + spi-max-frequency: true > + > +required: > + - compatible > + - reg > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + i2c0 { drop the 0 so just i2c { What we are doing is indicating it's an i2c bus but we don't care what i2c bus as that's not the bit we are describing in this binding. > + #address-cells = <1>; > + #size-cells = <0>; > + > + /* Example for a I2C device node */ > + accelerometer@1d { > + compatible = "adi,adxl355"; > + reg = <0x1d>; > + interrupt-parent = <&gpio>; > + interrupts = <25 IRQ_TYPE_EDGE_RISING>; > + }; > + }; > + - | > + #include <dt-bindings/gpio/gpio.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + spi0 { spi { should be fine. > + #address-cells = <1>; > + #size-cells = <0>; > + > + accelerometer@0 { > + compatible = "adi,adxl355"; > + reg = <0>; > + spi-max-frequency = <1000000>; > + interrupt-parent = <&gpio>; > + interrupts = <25 IRQ_TYPE_EDGE_RISING>; > + }; > + }; ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v6 2/2] iio: accel: Add driver support for ADXL355 2021-07-28 6:34 [PATCH v6 0/2] iio: accel: add support for ADXL355 Puranjay Mohan 2021-07-28 6:34 ` [PATCH v6 1/2] dt-bindings: iio: accel: Add DT binding doc " Puranjay Mohan @ 2021-07-28 6:34 ` Puranjay Mohan 2021-07-31 15:48 ` Jonathan Cameron 1 sibling, 1 reply; 5+ messages in thread From: Puranjay Mohan @ 2021-07-28 6:34 UTC (permalink / raw) To: Michael.Hennerich, alexandru.ardelean, jic23, devicetree, linux-iio, linux-kernel, lars, Dragos.Bogdan, Darius.Berghe Cc: Puranjay Mohan ADXL355 is 3-axis MEMS Accelerometer. It offers low noise density, low 0g offset drift, low power with selectable measurement ranges. It also features programmable high-pass and low-pass filters. Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/adxl354_adxl355.pdf Signed-off-by: Puranjay Mohan <puranjay12@gmail.com> --- MAINTAINERS | 7 + drivers/iio/accel/Kconfig | 29 ++ drivers/iio/accel/Makefile | 3 + drivers/iio/accel/adxl355.h | 77 +++++ drivers/iio/accel/adxl355_core.c | 542 +++++++++++++++++++++++++++++++ drivers/iio/accel/adxl355_i2c.c | 63 ++++ drivers/iio/accel/adxl355_spi.c | 66 ++++ 7 files changed, 787 insertions(+) create mode 100644 drivers/iio/accel/adxl355.h create mode 100644 drivers/iio/accel/adxl355_core.c create mode 100644 drivers/iio/accel/adxl355_i2c.c create mode 100644 drivers/iio/accel/adxl355_spi.c diff --git a/MAINTAINERS b/MAINTAINERS index bd7aff0c1..461f2a192 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -586,6 +586,13 @@ W: http://ez.analog.com/community/linux-device-drivers F: Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml F: drivers/input/misc/adxl34x.c +ADXL355 THREE-AXIS DIGITAL ACCELEROMETER DRIVER +M: Puranjay Mohan <puranjay12@gmail.com> +L: linux-iio@vger.kernel.org +S: Supported +F: drivers/iio/accel/adxl34x.c +F: Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml + ADXL372 THREE-AXIS DIGITAL ACCELEROMETER DRIVER M: Michael Hennerich <michael.hennerich@analog.com> S: Supported diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index cceda3cec..d0c45c809 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -61,6 +61,35 @@ config ADXL345_SPI will be called adxl345_spi and you will also get adxl345_core for the core module. +config ADXL355 + tristate + +config ADXL355_I2C + tristate "Analog Devices ADXL355 3-Axis Digital Accelerometer I2C Driver" + depends on I2C + select ADXL355 + select REGMAP_I2C + help + Say Y here if you want to build i2c support for the Analog Devices + ADXL355 3-axis digital accelerometer. + + To compile this driver as a module, choose M here: the module + will be called adxl355_i2c and you will also get adxl355_core + for the core module. + +config ADXL355_SPI + tristate "Analog Devices ADXL355 3-Axis Digital Accelerometer SPI Driver" + depends on SPI + select ADXL355 + select REGMAP_SPI + help + Say Y here if you want to build spi support for the Analog Devices + ADXL355 3-axis digital accelerometer. + + To compile this driver as a module, choose M here: the module + will be called adxl355_spi and you will also get adxl355_core + for the core module. + config ADXL372 tristate select IIO_BUFFER diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile index 32cd1342a..0e4721d2d 100644 --- a/drivers/iio/accel/Makefile +++ b/drivers/iio/accel/Makefile @@ -9,6 +9,9 @@ obj-$(CONFIG_ADIS16209) += adis16209.o obj-$(CONFIG_ADXL345) += adxl345_core.o obj-$(CONFIG_ADXL345_I2C) += adxl345_i2c.o obj-$(CONFIG_ADXL345_SPI) += adxl345_spi.o +obj-$(CONFIG_ADXL355) += adxl355_core.o +obj-$(CONFIG_ADXL355_I2C) += adxl355_i2c.o +obj-$(CONFIG_ADXL355_SPI) += adxl355_spi.o obj-$(CONFIG_ADXL372) += adxl372.o obj-$(CONFIG_ADXL372_I2C) += adxl372_i2c.o obj-$(CONFIG_ADXL372_SPI) += adxl372_spi.o diff --git a/drivers/iio/accel/adxl355.h b/drivers/iio/accel/adxl355.h new file mode 100644 index 000000000..77d0d0a28 --- /dev/null +++ b/drivers/iio/accel/adxl355.h @@ -0,0 +1,77 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * ADXL355 3-Axis Digital Accelerometer + * + * Copyright (c) 2021 Puranjay Mohan <puranjay12@gmail.com> + */ + +#ifndef _ADXL355_H_ +#define _ADXL355_H_ + +#include <linux/regmap.h> + +/* ADXL355 Register Definitions */ +#define ADXL355_DEVID_AD 0x00 +#define ADXL355_DEVID_MST 0x01 +#define ADXL355_PARTID 0x02 +#define ADXL355_REVID 0x03 +#define ADXL355_STATUS 0x04 +#define ADXL355_FIFO_ENTRIES 0x05 +#define ADXL355_TEMP2 0x06 +#define ADXL355_XDATA3 0x08 +#define ADXL355_YDATA3 0x0B +#define ADXL355_ZDATA3 0x0E +#define ADXL355_FIFO_DATA 0x11 +#define ADXL355_OFFSET_X_H 0x1E +#define ADXL355_OFFSET_Y_H 0x20 +#define ADXL355_OFFSET_Z_H 0x22 +#define ADXL355_ACT_EN 0x24 +#define ADXL355_ACT_THRESH_H 0x25 +#define ADXL355_ACT_THRESH_L 0x26 +#define ADXL355_ACT_COUNT 0x27 +#define ADXL355_FILTER 0x28 +#define ADXL355_FIFO_SAMPLES 0x29 +#define ADXL355_INT_MAP 0x2A +#define ADXL355_SYNC 0x2B +#define ADXL355_RANGE 0x2C +#define ADXL355_POWER_CTL 0x2D +#define ADXL355_SELF_TEST 0x2E +#define ADXL355_RESET 0x2F + +#define ADXL355_DEVID_AD_VAL 0xAD +#define ADXL355_DEVID_MST_VAL 0x1D +#define ADXL355_PARTID_VAL 0xED +#define ADXL355_REVID_VAL 0x01 +#define ADXL355_RESET_CODE 0x52 + +#define ADXL355_POWER_CTL_MODE_MSK GENMASK(1, 0) + +#define ADXL355_FILTER_ODR_MSK GENMASK(3, 0) +#define ADXL355_FILTER_HPF_MSK GENMASK(6, 4) + +/* + * The datasheet defines an intercept of 1885 LSB at 25 degC + * and a slope of -9.05 LSB/C. The following formula can be used to find the + * temperature: + * Temp = ((RAW - 1885)/(-9.05)) + 25 but this doesn't follow the format of + * the IIO which is Temp = (RAW + OFFSET) * SCALE. Hence using some rearranging + * we get the scale as -110.49723 and offset as -2111.25 + */ +#define TEMP_SCALE_VAL -110 +#define TEMP_SCALE_VAL2 497238 +#define TEMP_OFFSET_VAL -2111 +#define TEMP_OFFSET_VAL2 250000 + +/* + * At +/- 2g with 20-bit resolution, scale is given in datasheet as + * 3.9ug/LSB = 0.0000039 * 9.80665 = 0.00003824593 m/s^2 + */ +#define ADXL355_NSCALE 38245 + +extern const struct regmap_access_table adxl355_readable_regs_tbl; + +extern const struct regmap_access_table adxl355_writeable_regs_tbl; + +int adxl355_core_probe(struct device *dev, struct regmap *regmap, + const char *name); +#endif /* _ADXL355_H_ */ diff --git a/drivers/iio/accel/adxl355_core.c b/drivers/iio/accel/adxl355_core.c new file mode 100644 index 000000000..8556f286e --- /dev/null +++ b/drivers/iio/accel/adxl355_core.c @@ -0,0 +1,542 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * ADXL355 3-Axis Digital Accelerometer IIO core driver + * + * Copyright (c) 2021 Puranjay Mohan <puranjay12@gmail.com> + * + * Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/adxl354_adxl355.pdf + */ + +#include <asm/unaligned.h> +#include <linux/bitfield.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/limits.h> +#include <linux/math64.h> +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/regmap.h> + +#include "adxl355.h" + +static const struct regmap_range adxl355_read_reg_range[] = { + regmap_reg_range(ADXL355_DEVID_AD, ADXL355_FIFO_DATA), + regmap_reg_range(ADXL355_OFFSET_X_H, ADXL355_SELF_TEST) +}; + +const struct regmap_access_table adxl355_readable_regs_tbl = { + .yes_ranges = adxl355_read_reg_range, + .n_yes_ranges = ARRAY_SIZE(adxl355_read_reg_range), +}; +EXPORT_SYMBOL_GPL(adxl355_readable_regs_tbl); + +static const struct regmap_range adxl355_write_reg_range[] = { + regmap_reg_range(ADXL355_OFFSET_X_H, ADXL355_RESET) +}; + +const struct regmap_access_table adxl355_writeable_regs_tbl = { + .yes_ranges = adxl355_write_reg_range, + .n_yes_ranges = ARRAY_SIZE(adxl355_write_reg_range), +}; +EXPORT_SYMBOL_GPL(adxl355_writeable_regs_tbl); + +enum adxl355_op_mode { + ADXL355_MEASUREMENT, + ADXL355_STANDBY, + ADXL355_TEMP_OFF +}; + +enum adxl355_odr { + ADXL355_ODR_4000HZ, + ADXL355_ODR_2000HZ, + ADXL355_ODR_1000HZ, + ADXL355_ODR_500HZ, + ADXL355_ODR_250HZ, + ADXL355_ODR_125HZ, + ADXL355_ODR_62_5HZ, + ADXL355_ODR_31_25HZ, + ADXL355_ODR_15_625HZ, + ADXL355_ODR_7_813HZ, + ADXL355_ODR_3_906HZ +}; + +enum adxl355_hpf_3db { + ADXL355_HPF_OFF, + ADXL355_HPF_24_7, + ADXL355_HPF_6_2084, + ADXL355_HPF_1_5545, + ADXL355_HPF_0_3862, + ADXL355_HPF_0_0954, + ADXL355_HPF_0_0238 +}; + +static const int adxl355_odr_table[][2] = { + [0] = {4000, 0}, + [1] = {2000, 0}, + [2] = {1000, 0}, + [3] = {500, 0}, + [4] = {250, 0}, + [5] = {125, 0}, + [6] = {62, 500000}, + [7] = {31, 250000}, + [8] = {15, 625000}, + [9] = {7, 813000}, + [10] = {3, 906000} +}; + +static const int adxl355_hpf_3db_multipliers[] = { + 0, + 247000, + 62084, + 15545, + 3862, + 954, + 238 +}; + +struct adxl355_data { + struct regmap *regmap; + struct device *dev; + struct mutex lock; /* lock to protect op_mode */ + enum adxl355_op_mode op_mode; + enum adxl355_odr odr; + enum adxl355_hpf_3db hpf_3db; + int x_calibbias; + int y_calibbias; + int z_calibbias; + int adxl355_hpf_3db_table[7][2]; + u8 transf_buf[3] ____cacheline_aligned; +}; + +static int adxl355_set_op_mode(struct adxl355_data *data, + enum adxl355_op_mode op_mode) +{ + int ret; + + if (data->op_mode == op_mode) + return 0; + + ret = regmap_update_bits(data->regmap, ADXL355_POWER_CTL, + ADXL355_POWER_CTL_MODE_MSK, op_mode); + if (ret < 0) + return ret; + + data->op_mode = op_mode; + + return ret; +} + +static void adxl355_fill_3db_frequency_table(struct adxl355_data *data) +{ + int i; + u64 rem; + u64 div; + u32 multiplier; + u64 odr = mul_u64_u32_shr(adxl355_odr_table[data->odr][0], 1000000, 0) + + adxl355_odr_table[data->odr][1]; + + for (i = 0; i < ARRAY_SIZE(adxl355_hpf_3db_multipliers); i++) { + multiplier = adxl355_hpf_3db_multipliers[i]; + div = div64_u64_rem(mul_u64_u32_shr(odr, multiplier, 0), + 100000000000000UL, &rem); + + data->adxl355_hpf_3db_table[i][0] = div; + data->adxl355_hpf_3db_table[i][1] = div_u64(rem, 100000000); + } +} + +static int adxl355_setup(struct adxl355_data *data) +{ + unsigned int regval; + int ret; + + ret = regmap_read(data->regmap, ADXL355_DEVID_AD, ®val); + if (ret) + return ret; + + if (regval != ADXL355_DEVID_AD_VAL) { + dev_err(data->dev, "Invalid ADI ID 0x%02x\n", regval); + return -ENODEV; + } + + ret = regmap_read(data->regmap, ADXL355_DEVID_MST, ®val); + if (ret) + return ret; + + if (regval != ADXL355_DEVID_MST_VAL) { + dev_err(data->dev, "Invalid MEMS ID 0x%02x\n", regval); + return -ENODEV; + } + + ret = regmap_read(data->regmap, ADXL355_PARTID, ®val); + if (ret) + return ret; + + if (regval != ADXL355_PARTID_VAL) { + dev_err(data->dev, "Invalid DEV ID 0x%02x\n", regval); + return -ENODEV; + } + + /* + * Perform a software reset to make sure the device is in a consistent + * state after start up. + */ + ret = regmap_write(data->regmap, ADXL355_RESET, ADXL355_RESET_CODE); + if (ret) + return ret; + + adxl355_fill_3db_frequency_table(data); + + return adxl355_set_op_mode(data, ADXL355_MEASUREMENT); +} + +static int adxl355_get_temp_data(struct adxl355_data *data, u8 addr) +{ + return regmap_bulk_read(data->regmap, addr, data->transf_buf, 2); +} + +static int adxl355_read_axis(struct adxl355_data *data, u8 addr) +{ + int ret; + + ret = regmap_bulk_read(data->regmap, addr, data->transf_buf, 3); + if (ret < 0) + return ret; + + return get_unaligned_be24(data->transf_buf); +} + +static int adxl355_find_match(const int (*freq_tbl)[2], const int n, + const int val, const int val2) +{ + int i; + + for (i = 0; i < n; i++) { + if (freq_tbl[i][0] == val && freq_tbl[i][1] == val2) + return i; + } + + return -EINVAL; +} + +static int adxl355_set_odr(struct adxl355_data *data, + enum adxl355_odr odr) +{ + int ret = 0; + + mutex_lock(&data->lock); + + if (data->odr == odr) + goto out_unlock; + + ret = adxl355_set_op_mode(data, ADXL355_STANDBY); + if (ret < 0) + goto out_unlock; + + ret = regmap_update_bits(data->regmap, ADXL355_FILTER, + ADXL355_FILTER_ODR_MSK, + FIELD_PREP(ADXL355_FILTER_ODR_MSK, odr)); + if (ret < 0) + goto out_unlock; + + data->odr = odr; + adxl355_fill_3db_frequency_table(data); + +out_unlock: + ret = adxl355_set_op_mode(data, ADXL355_MEASUREMENT); + mutex_unlock(&data->lock); + return ret; +} + +static int adxl355_set_hpf_3db(struct adxl355_data *data, + enum adxl355_hpf_3db hpf) +{ + int ret = 0; + + mutex_lock(&data->lock); + + if (data->hpf_3db == hpf) + goto out_unlock; + + ret = adxl355_set_op_mode(data, ADXL355_STANDBY); + if (ret < 0) + goto out_unlock; + + ret = regmap_update_bits(data->regmap, ADXL355_FILTER, + ADXL355_FILTER_HPF_MSK, + FIELD_PREP(ADXL355_FILTER_HPF_MSK, hpf)); + if (!ret) + data->hpf_3db = hpf; + +out_unlock: + ret = adxl355_set_op_mode(data, ADXL355_MEASUREMENT); + mutex_unlock(&data->lock); + return ret; +} + +static int adxl355_set_calibbias(struct adxl355_data *data, + int channel2, int calibbias) +{ + int ret = 0; + + data->transf_buf[0] = (calibbias >> 8) & 0xFF; + data->transf_buf[1] = calibbias & 0xFF; + data->transf_buf[2] = 0; + + mutex_lock(&data->lock); + + ret = adxl355_set_op_mode(data, ADXL355_STANDBY); + if (ret < 0) + goto out_unlock; + + switch (channel2) { + case IIO_MOD_X: + ret = regmap_bulk_write(data->regmap, ADXL355_OFFSET_X_H, + data->transf_buf, 2); + if (ret < 0) + goto out_unlock; + data->x_calibbias = calibbias; + break; + case IIO_MOD_Y: + ret = regmap_bulk_write(data->regmap, ADXL355_OFFSET_Y_H, + data->transf_buf, 2); + if (ret < 0) + goto out_unlock; + data->y_calibbias = calibbias; + break; + case IIO_MOD_Z: + ret = regmap_bulk_write(data->regmap, ADXL355_OFFSET_Z_H, + data->transf_buf, 2); + if (ret < 0) + goto out_unlock; + data->z_calibbias = calibbias; + break; + default: + ret = -EINVAL; + break; + } + +out_unlock: + ret = adxl355_set_op_mode(data, ADXL355_MEASUREMENT); + mutex_unlock(&data->lock); + return ret; +} + +static int adxl355_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct adxl355_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + switch (chan->type) { + case IIO_TEMP: + ret = adxl355_get_temp_data(data, chan->address); + if (ret < 0) + return ret; + *val = get_unaligned_be16(data->transf_buf); + + return IIO_VAL_INT; + case IIO_ACCEL: + ret = adxl355_read_axis(data, chan->address); + if (ret < 0) + return ret; + *val = sign_extend32(ret >> (chan->scan_type.shift), + chan->scan_type.realbits - 1); + return IIO_VAL_INT; + default: + return -EINVAL; + } + + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_TEMP: + *val = TEMP_SCALE_VAL; + *val2 = TEMP_SCALE_VAL2; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_ACCEL: + *val = 0; + *val2 = ADXL355_NSCALE; + return IIO_VAL_INT_PLUS_NANO; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_OFFSET: + *val = TEMP_OFFSET_VAL; + *val2 = TEMP_OFFSET_VAL2; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_CHAN_INFO_CALIBBIAS: + if (chan->channel2 == IIO_MOD_X) + *val = data->x_calibbias; + else if (chan->channel2 == IIO_MOD_Y) + *val = data->y_calibbias; + else + *val = data->z_calibbias; + *val = sign_extend32(*val, 15); + return IIO_VAL_INT; + case IIO_CHAN_INFO_SAMP_FREQ: + *val = adxl355_odr_table[data->odr][0]; + *val2 = adxl355_odr_table[data->odr][1]; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY: + *val = data->adxl355_hpf_3db_table[data->hpf_3db][0]; + *val2 = data->adxl355_hpf_3db_table[data->hpf_3db][1]; + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } +} + +static int adxl355_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct adxl355_data *data = iio_priv(indio_dev); + int odr_idx, hpf_idx, calibbias; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + odr_idx = adxl355_find_match(adxl355_odr_table, + ARRAY_SIZE(adxl355_odr_table), + val, val2); + if (odr_idx < 0) + return odr_idx; + + return adxl355_set_odr(data, odr_idx); + case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY: + hpf_idx = adxl355_find_match(data->adxl355_hpf_3db_table, + ARRAY_SIZE(data->adxl355_hpf_3db_table), + val, val2); + if (hpf_idx < 0) + return hpf_idx; + + return adxl355_set_hpf_3db(data, hpf_idx); + case IIO_CHAN_INFO_CALIBBIAS: + calibbias = clamp_t(int, val, S16_MIN, S16_MAX); + + return adxl355_set_calibbias(data, chan->channel2, calibbias); + default: + return -EINVAL; + } +} + +static int adxl355_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, int *length, + long mask) +{ + struct adxl355_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + *vals = (const int *)adxl355_odr_table; + *type = IIO_VAL_INT_PLUS_MICRO; + /* Values are stored in a 2D matrix */ + *length = ARRAY_SIZE(adxl355_odr_table) * 2; + + return IIO_AVAIL_LIST; + case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY: + *vals = (const int *)(data->adxl355_hpf_3db_table); + *type = IIO_VAL_INT_PLUS_MICRO; + /* Values are stored in a 2D matrix */ + *length = ARRAY_SIZE(data->adxl355_hpf_3db_table) * 2; + + return IIO_AVAIL_LIST; + default: + return -EINVAL; + } +} + +static const unsigned long adxl355_avail_scan_masks[] = { + GENMASK(3, 0), + 0 +}; + +static const struct iio_info adxl355_info = { + .read_raw = adxl355_read_raw, + .write_raw = adxl355_write_raw, + .read_avail = &adxl355_read_avail +}; + +#define ADXL355_ACCEL_CHANNEL(index, reg, axis) { \ + .type = IIO_ACCEL, \ + .address = reg, \ + .modified = 1, \ + .channel2 = IIO_MOD_##axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_CALIBBIAS), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ + BIT(IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY), \ + .info_mask_shared_by_type_available = \ + BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ + BIT(IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY), \ + .scan_index = index, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 20, \ + .storagebits = 32, \ + .shift = 4, \ + .endianness = IIO_BE, \ + } \ +} + +static const struct iio_chan_spec adxl355_channels[] = { + ADXL355_ACCEL_CHANNEL(0, ADXL355_XDATA3, X), + ADXL355_ACCEL_CHANNEL(1, ADXL355_YDATA3, Y), + ADXL355_ACCEL_CHANNEL(2, ADXL355_ZDATA3, Z), + { + .type = IIO_TEMP, + .address = ADXL355_TEMP2, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_OFFSET), + .scan_index = 3, + .scan_type = { + .sign = 's', + .realbits = 12, + .storagebits = 16, + .endianness = IIO_BE, + }, + } +}; + +int adxl355_core_probe(struct device *dev, struct regmap *regmap, + const char *name) +{ + struct adxl355_data *data; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + data->regmap = regmap; + data->dev = dev; + data->op_mode = ADXL355_STANDBY; + mutex_init(&data->lock); + + indio_dev->name = name; + indio_dev->info = &adxl355_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = adxl355_channels; + indio_dev->num_channels = ARRAY_SIZE(adxl355_channels); + indio_dev->available_scan_masks = adxl355_avail_scan_masks; + + ret = adxl355_setup(data); + if (ret < 0) { + dev_err(dev, "ADXL355 setup failed\n"); + return ret; + } + + return devm_iio_device_register(dev, indio_dev); +} +EXPORT_SYMBOL_GPL(adxl355_core_probe); + +MODULE_AUTHOR("Puranjay Mohan <puranjay12@gmail.com>"); +MODULE_DESCRIPTION("ADXL355 3-Axis Digital Accelerometer core driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/accel/adxl355_i2c.c b/drivers/iio/accel/adxl355_i2c.c new file mode 100644 index 000000000..6b84d8df2 --- /dev/null +++ b/drivers/iio/accel/adxl355_i2c.c @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * ADXL355 3-Axis Digital Accelerometer I2C driver + * + * Copyright (c) 2021 Puranjay Mohan <puranjay12@gmail.com> + */ + +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/regmap.h> + +#include "adxl355.h" + +static const struct regmap_config adxl355_i2c_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = 0x2F, + .rd_table = &adxl355_readable_regs_tbl, + .wr_table = &adxl355_writeable_regs_tbl +}; + +static int adxl355_i2c_probe(struct i2c_client *client) +{ + struct regmap *regmap; + + regmap = devm_regmap_init_i2c(client, &adxl355_i2c_regmap_config); + if (IS_ERR(regmap)) { + dev_err(&client->dev, "Error initializing i2c regmap: %ld\n", + PTR_ERR(regmap)); + return PTR_ERR(regmap); + } + + return adxl355_core_probe(&client->dev, regmap, client->name); +} + +static const struct i2c_device_id adxl355_i2c_id[] = { + { "adxl355", 0 }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, adxl355_i2c_id); + +static const struct of_device_id adxl355_of_match[] = { + { .compatible = "adi,adxl355" }, + { } +}; + +MODULE_DEVICE_TABLE(of, adxl355_of_match); + +static struct i2c_driver adxl355_i2c_driver = { + .driver = { + .name = "adxl355_i2c", + .of_match_table = adxl355_of_match, + }, + .probe_new = adxl355_i2c_probe, + .id_table = adxl355_i2c_id, +}; + +module_i2c_driver(adxl355_i2c_driver); + +MODULE_AUTHOR("Puranjay Mohan <puranjay12@gmail.com>"); +MODULE_DESCRIPTION("ADXL355 3-Axis Digital Accelerometer I2C driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/accel/adxl355_spi.c b/drivers/iio/accel/adxl355_spi.c new file mode 100644 index 000000000..108d1b308 --- /dev/null +++ b/drivers/iio/accel/adxl355_spi.c @@ -0,0 +1,66 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * ADXL355 3-Axis Digital Accelerometer SPI driver + * + * Copyright (c) 2021 Puranjay Mohan <puranjay12@gmail.com> + */ + +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/spi/spi.h> + +#include "adxl355.h" + +static const struct regmap_config adxl355_spi_regmap_config = { + .reg_bits = 7, + .pad_bits = 1, + .val_bits = 8, + .read_flag_mask = BIT(0), + .max_register = 0x2F, + .rd_table = &adxl355_readable_regs_tbl, + .wr_table = &adxl355_writeable_regs_tbl +}; + +static int adxl355_spi_probe(struct spi_device *spi) +{ + const struct spi_device_id *id = spi_get_device_id(spi); + struct regmap *regmap; + + regmap = devm_regmap_init_spi(spi, &adxl355_spi_regmap_config); + if (IS_ERR(regmap)) { + dev_err(&spi->dev, "Error initializing spi regmap: %ld\n", + PTR_ERR(regmap)); + return PTR_ERR(regmap); + } + + return adxl355_core_probe(&spi->dev, regmap, id->name); +} + +static const struct spi_device_id adxl355_spi_id[] = { + { "adxl355", 0 }, + { } +}; + +MODULE_DEVICE_TABLE(spi, adxl355_spi_id); + +static const struct of_device_id adxl355_of_match[] = { + { .compatible = "adi,adxl355" }, + { } +}; + +MODULE_DEVICE_TABLE(of, adxl355_of_match); + +static struct spi_driver adxl355_spi_driver = { + .driver = { + .name = "adxl355_spi", + .of_match_table = adxl355_of_match, + }, + .probe = adxl355_spi_probe, + .id_table = adxl355_spi_id, +}; + +module_spi_driver(adxl355_spi_driver); + +MODULE_AUTHOR("Puranjay Mohan <puranjay12@gmail.com>"); +MODULE_DESCRIPTION("ADXL355 3-Axis Digital Accelerometer SPI driver"); +MODULE_LICENSE("GPL v2"); -- 2.30.1 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v6 2/2] iio: accel: Add driver support for ADXL355 2021-07-28 6:34 ` [PATCH v6 2/2] iio: accel: Add driver support " Puranjay Mohan @ 2021-07-31 15:48 ` Jonathan Cameron 0 siblings, 0 replies; 5+ messages in thread From: Jonathan Cameron @ 2021-07-31 15:48 UTC (permalink / raw) To: Puranjay Mohan Cc: Michael.Hennerich, alexandru.ardelean, devicetree, linux-iio, linux-kernel, lars, Dragos.Bogdan, Darius.Berghe On Wed, 28 Jul 2021 12:04:30 +0530 Puranjay Mohan <puranjay12@gmail.com> wrote: > ADXL355 is 3-axis MEMS Accelerometer. It offers low noise density, > low 0g offset drift, low power with selectable measurement ranges. > It also features programmable high-pass and low-pass filters. > > Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/adxl354_adxl355.pdf > Signed-off-by: Puranjay Mohan <puranjay12@gmail.com> Hi Puranjan, Looks pretty good so comments below are fairly minor changes, many of which will make your life easier as you add more features to this driver, rather than strictly being required for what you have here. If you are working on buffer + event support, feel free to send that with the next version of this as well. I might well pick up the first part of such a series, even if the other patches need further changes. Given there can be some delay and we are in the holiday season you don't want to get stuck waiting for review of earlier patches! Thanks, Jonathan > --- > MAINTAINERS | 7 + > drivers/iio/accel/Kconfig | 29 ++ > drivers/iio/accel/Makefile | 3 + > drivers/iio/accel/adxl355.h | 77 +++++ > drivers/iio/accel/adxl355_core.c | 542 +++++++++++++++++++++++++++++++ > drivers/iio/accel/adxl355_i2c.c | 63 ++++ > drivers/iio/accel/adxl355_spi.c | 66 ++++ > 7 files changed, 787 insertions(+) > create mode 100644 drivers/iio/accel/adxl355.h > create mode 100644 drivers/iio/accel/adxl355_core.c > create mode 100644 drivers/iio/accel/adxl355_i2c.c > create mode 100644 drivers/iio/accel/adxl355_spi.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index bd7aff0c1..461f2a192 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -586,6 +586,13 @@ W: http://ez.analog.com/community/linux-device-drivers > F: Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml > F: drivers/input/misc/adxl34x.c > > +ADXL355 THREE-AXIS DIGITAL ACCELEROMETER DRIVER > +M: Puranjay Mohan <puranjay12@gmail.com> > +L: linux-iio@vger.kernel.org > +S: Supported > +F: drivers/iio/accel/adxl34x.c > +F: Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml > + > ADXL372 THREE-AXIS DIGITAL ACCELEROMETER DRIVER > M: Michael Hennerich <michael.hennerich@analog.com> > S: Supported > diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig > index cceda3cec..d0c45c809 100644 > --- a/drivers/iio/accel/Kconfig > +++ b/drivers/iio/accel/Kconfig > @@ -61,6 +61,35 @@ config ADXL345_SPI > will be called adxl345_spi and you will also get adxl345_core > for the core module. > > +config ADXL355 > + tristate > + > +config ADXL355_I2C > + tristate "Analog Devices ADXL355 3-Axis Digital Accelerometer I2C Driver" > + depends on I2C > + select ADXL355 > + select REGMAP_I2C > + help > + Say Y here if you want to build i2c support for the Analog Devices > + ADXL355 3-axis digital accelerometer. > + > + To compile this driver as a module, choose M here: the module > + will be called adxl355_i2c and you will also get adxl355_core > + for the core module. > + > +config ADXL355_SPI > + tristate "Analog Devices ADXL355 3-Axis Digital Accelerometer SPI Driver" > + depends on SPI > + select ADXL355 > + select REGMAP_SPI > + help > + Say Y here if you want to build spi support for the Analog Devices > + ADXL355 3-axis digital accelerometer. > + > + To compile this driver as a module, choose M here: the module > + will be called adxl355_spi and you will also get adxl355_core > + for the core module. > + > config ADXL372 > tristate > select IIO_BUFFER > diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile > index 32cd1342a..0e4721d2d 100644 > --- a/drivers/iio/accel/Makefile > +++ b/drivers/iio/accel/Makefile > @@ -9,6 +9,9 @@ obj-$(CONFIG_ADIS16209) += adis16209.o > obj-$(CONFIG_ADXL345) += adxl345_core.o > obj-$(CONFIG_ADXL345_I2C) += adxl345_i2c.o > obj-$(CONFIG_ADXL345_SPI) += adxl345_spi.o > +obj-$(CONFIG_ADXL355) += adxl355_core.o > +obj-$(CONFIG_ADXL355_I2C) += adxl355_i2c.o > +obj-$(CONFIG_ADXL355_SPI) += adxl355_spi.o > obj-$(CONFIG_ADXL372) += adxl372.o > obj-$(CONFIG_ADXL372_I2C) += adxl372_i2c.o > obj-$(CONFIG_ADXL372_SPI) += adxl372_spi.o > diff --git a/drivers/iio/accel/adxl355.h b/drivers/iio/accel/adxl355.h > new file mode 100644 > index 000000000..77d0d0a28 > --- /dev/null > +++ b/drivers/iio/accel/adxl355.h > @@ -0,0 +1,77 @@ > +/* SPDX-License-Identifier: GPL-2.0-only */ > +/* > + * ADXL355 3-Axis Digital Accelerometer > + * > + * Copyright (c) 2021 Puranjay Mohan <puranjay12@gmail.com> > + */ > + > +#ifndef _ADXL355_H_ > +#define _ADXL355_H_ > + > +#include <linux/regmap.h> > + > +/* ADXL355 Register Definitions */ > +#define ADXL355_DEVID_AD 0x00 why are these register definitions in a header, I'd expect them to only be accessed from the main c file, so if that is true, move them to the top of that file. The less we have in a header, the better! Also, you may want to consider using naming that makes it clear these are register addresses. That makes it much more readable once you have fields, and masks etc defined as well. At _REG postfix tends to work well for this. > +#define ADXL355_DEVID_MST 0x01 > +#define ADXL355_PARTID 0x02 > +#define ADXL355_REVID 0x03 > +#define ADXL355_STATUS 0x04 > +#define ADXL355_FIFO_ENTRIES 0x05 > +#define ADXL355_TEMP2 0x06 > +#define ADXL355_XDATA3 0x08 > +#define ADXL355_YDATA3 0x0B > +#define ADXL355_ZDATA3 0x0E > +#define ADXL355_FIFO_DATA 0x11 > +#define ADXL355_OFFSET_X_H 0x1E > +#define ADXL355_OFFSET_Y_H 0x20 > +#define ADXL355_OFFSET_Z_H 0x22 > +#define ADXL355_ACT_EN 0x24 > +#define ADXL355_ACT_THRESH_H 0x25 > +#define ADXL355_ACT_THRESH_L 0x26 > +#define ADXL355_ACT_COUNT 0x27 > +#define ADXL355_FILTER 0x28 > +#define ADXL355_FIFO_SAMPLES 0x29 > +#define ADXL355_INT_MAP 0x2A > +#define ADXL355_SYNC 0x2B > +#define ADXL355_RANGE 0x2C > +#define ADXL355_POWER_CTL 0x2D > +#define ADXL355_SELF_TEST 0x2E > +#define ADXL355_RESET 0x2F > + > +#define ADXL355_DEVID_AD_VAL 0xAD > +#define ADXL355_DEVID_MST_VAL 0x1D > +#define ADXL355_PARTID_VAL 0xED > +#define ADXL355_REVID_VAL 0x01 REVID is unused and I'd like to 'hope' that it's never needed due to an compatibility problems. As such I'd drop this define. > +#define ADXL355_RESET_CODE 0x52 > + > +#define ADXL355_POWER_CTL_MODE_MSK GENMASK(1, 0) > + > +#define ADXL355_FILTER_ODR_MSK GENMASK(3, 0) > +#define ADXL355_FILTER_HPF_MSK GENMASK(6, 4) Good to group the field defintions with the register defines. A nice option is to use both naming and indentation to make it clear what thigns are. Eg. for these. #define ADXL355_FILTER_REG 0x28 #define ADXL355_FILTER_ODR_MSK GENMASK(3, 0) #define ADXL355_FILTER_HPF_MSK GENMASK(6, 4) > + > +/* > + * The datasheet defines an intercept of 1885 LSB at 25 degC > + * and a slope of -9.05 LSB/C. The following formula can be used to find the > + * temperature: > + * Temp = ((RAW - 1885)/(-9.05)) + 25 but this doesn't follow the format of > + * the IIO which is Temp = (RAW + OFFSET) * SCALE. Hence using some rearranging > + * we get the scale as -110.49723 and offset as -2111.25 > + */ > +#define TEMP_SCALE_VAL -110 > +#define TEMP_SCALE_VAL2 497238 > +#define TEMP_OFFSET_VAL -2111 > +#define TEMP_OFFSET_VAL2 250000 > + > +/* > + * At +/- 2g with 20-bit resolution, scale is given in datasheet as > + * 3.9ug/LSB = 0.0000039 * 9.80665 = 0.00003824593 m/s^2 > + */ > +#define ADXL355_NSCALE 38245 > + > +extern const struct regmap_access_table adxl355_readable_regs_tbl; > + > +extern const struct regmap_access_table adxl355_writeable_regs_tbl; > + > +int adxl355_core_probe(struct device *dev, struct regmap *regmap, > + const char *name); > +#endif /* _ADXL355_H_ */ > diff --git a/drivers/iio/accel/adxl355_core.c b/drivers/iio/accel/adxl355_core.c > new file mode 100644 > index 000000000..8556f286e > --- /dev/null > +++ b/drivers/iio/accel/adxl355_core.c > @@ -0,0 +1,542 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * ADXL355 3-Axis Digital Accelerometer IIO core driver > + * > + * Copyright (c) 2021 Puranjay Mohan <puranjay12@gmail.com> > + * > + * Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/adxl354_adxl355.pdf > + */ > + > +#include <asm/unaligned.h> > +#include <linux/bitfield.h> > +#include <linux/iio/iio.h> > +#include <linux/iio/sysfs.h> I don't think you use anything from iio/sysfs.h so drop that one. > +#include <linux/limits.h> > +#include <linux/math64.h> > +#include <linux/module.h> > +#include <linux/mod_devicetable.h> > +#include <linux/regmap.h> > + > +#include "adxl355.h" > + > +static const struct regmap_range adxl355_read_reg_range[] = { > + regmap_reg_range(ADXL355_DEVID_AD, ADXL355_FIFO_DATA), > + regmap_reg_range(ADXL355_OFFSET_X_H, ADXL355_SELF_TEST) > +}; > + > +const struct regmap_access_table adxl355_readable_regs_tbl = { > + .yes_ranges = adxl355_read_reg_range, > + .n_yes_ranges = ARRAY_SIZE(adxl355_read_reg_range), > +}; > +EXPORT_SYMBOL_GPL(adxl355_readable_regs_tbl); > + > +static const struct regmap_range adxl355_write_reg_range[] = { > + regmap_reg_range(ADXL355_OFFSET_X_H, ADXL355_RESET) > +}; > + > +const struct regmap_access_table adxl355_writeable_regs_tbl = { > + .yes_ranges = adxl355_write_reg_range, > + .n_yes_ranges = ARRAY_SIZE(adxl355_write_reg_range), > +}; > +EXPORT_SYMBOL_GPL(adxl355_writeable_regs_tbl); > + > +enum adxl355_op_mode { > + ADXL355_MEASUREMENT, > + ADXL355_STANDBY, > + ADXL355_TEMP_OFF > +}; > + > +enum adxl355_odr { > + ADXL355_ODR_4000HZ, > + ADXL355_ODR_2000HZ, > + ADXL355_ODR_1000HZ, > + ADXL355_ODR_500HZ, > + ADXL355_ODR_250HZ, > + ADXL355_ODR_125HZ, > + ADXL355_ODR_62_5HZ, > + ADXL355_ODR_31_25HZ, > + ADXL355_ODR_15_625HZ, > + ADXL355_ODR_7_813HZ, > + ADXL355_ODR_3_906HZ > +}; > + > +enum adxl355_hpf_3db { > + ADXL355_HPF_OFF, > + ADXL355_HPF_24_7, > + ADXL355_HPF_6_2084, > + ADXL355_HPF_1_5545, > + ADXL355_HPF_0_3862, > + ADXL355_HPF_0_0954, > + ADXL355_HPF_0_0238 > +}; > + > +static const int adxl355_odr_table[][2] = { > + [0] = {4000, 0}, > + [1] = {2000, 0}, > + [2] = {1000, 0}, > + [3] = {500, 0}, > + [4] = {250, 0}, > + [5] = {125, 0}, > + [6] = {62, 500000}, > + [7] = {31, 250000}, > + [8] = {15, 625000}, > + [9] = {7, 813000}, > + [10] = {3, 906000} > +}; > + > +static const int adxl355_hpf_3db_multipliers[] = { > + 0, > + 247000, > + 62084, > + 15545, > + 3862, > + 954, > + 238 > +}; > + > +struct adxl355_data { > + struct regmap *regmap; > + struct device *dev; > + struct mutex lock; /* lock to protect op_mode */ > + enum adxl355_op_mode op_mode; > + enum adxl355_odr odr; > + enum adxl355_hpf_3db hpf_3db; > + int x_calibbias; > + int y_calibbias; > + int z_calibbias; > + int adxl355_hpf_3db_table[7][2]; > + u8 transf_buf[3] ____cacheline_aligned; > +}; > + > +static int adxl355_set_op_mode(struct adxl355_data *data, > + enum adxl355_op_mode op_mode) > +{ > + int ret; > + > + if (data->op_mode == op_mode) > + return 0; > + > + ret = regmap_update_bits(data->regmap, ADXL355_POWER_CTL, > + ADXL355_POWER_CTL_MODE_MSK, op_mode); > + if (ret < 0) > + return ret; > + > + data->op_mode = op_mode; > + > + return ret; > +} > + > +static void adxl355_fill_3db_frequency_table(struct adxl355_data *data) > +{ > + int i; > + u64 rem; > + u64 div; > + u32 multiplier; > + u64 odr = mul_u64_u32_shr(adxl355_odr_table[data->odr][0], 1000000, 0) + > + adxl355_odr_table[data->odr][1]; > + > + for (i = 0; i < ARRAY_SIZE(adxl355_hpf_3db_multipliers); i++) { > + multiplier = adxl355_hpf_3db_multipliers[i]; > + div = div64_u64_rem(mul_u64_u32_shr(odr, multiplier, 0), > + 100000000000000UL, &rem); > + > + data->adxl355_hpf_3db_table[i][0] = div; > + data->adxl355_hpf_3db_table[i][1] = div_u64(rem, 100000000); > + } > +} > + > +static int adxl355_setup(struct adxl355_data *data) > +{ > + unsigned int regval; > + int ret; > + > + ret = regmap_read(data->regmap, ADXL355_DEVID_AD, ®val); > + if (ret) > + return ret; > + > + if (regval != ADXL355_DEVID_AD_VAL) { > + dev_err(data->dev, "Invalid ADI ID 0x%02x\n", regval); > + return -ENODEV; > + } > + > + ret = regmap_read(data->regmap, ADXL355_DEVID_MST, ®val); > + if (ret) > + return ret; > + > + if (regval != ADXL355_DEVID_MST_VAL) { > + dev_err(data->dev, "Invalid MEMS ID 0x%02x\n", regval); > + return -ENODEV; > + } > + > + ret = regmap_read(data->regmap, ADXL355_PARTID, ®val); > + if (ret) > + return ret; > + > + if (regval != ADXL355_PARTID_VAL) { > + dev_err(data->dev, "Invalid DEV ID 0x%02x\n", regval); > + return -ENODEV; > + } > + > + /* > + * Perform a software reset to make sure the device is in a consistent > + * state after start up. > + */ > + ret = regmap_write(data->regmap, ADXL355_RESET, ADXL355_RESET_CODE); > + if (ret) > + return ret; > + > + adxl355_fill_3db_frequency_table(data); > + > + return adxl355_set_op_mode(data, ADXL355_MEASUREMENT); > +} > + > +static int adxl355_get_temp_data(struct adxl355_data *data, u8 addr) > +{ > + return regmap_bulk_read(data->regmap, addr, data->transf_buf, 2); > +} > + > +static int adxl355_read_axis(struct adxl355_data *data, u8 addr) > +{ > + int ret; > + > + ret = regmap_bulk_read(data->regmap, addr, data->transf_buf, 3); > + if (ret < 0) currently the code is inconsistent on if (ret) or if (ret < 0) for regmap calls. I would prefer if (ret) throughout as that makes things consistent when you do return adxlset_op_mode() at the end of a function and any positive return (of which there aren't any) would be returned unlike in error paths above. > + return ret; > + > + return get_unaligned_be24(data->transf_buf); > +} > + > +static int adxl355_find_match(const int (*freq_tbl)[2], const int n, > + const int val, const int val2) > +{ > + int i; > + > + for (i = 0; i < n; i++) { > + if (freq_tbl[i][0] == val && freq_tbl[i][1] == val2) > + return i; > + } > + > + return -EINVAL; > +} > + > +static int adxl355_set_odr(struct adxl355_data *data, > + enum adxl355_odr odr) > +{ > + int ret = 0; > + > + mutex_lock(&data->lock); > + > + if (data->odr == odr) > + goto out_unlock; > + > + ret = adxl355_set_op_mode(data, ADXL355_STANDBY); > + if (ret < 0) > + goto out_unlock; > + > + ret = regmap_update_bits(data->regmap, ADXL355_FILTER, > + ADXL355_FILTER_ODR_MSK, > + FIELD_PREP(ADXL355_FILTER_ODR_MSK, odr)); > + if (ret < 0) > + goto out_unlock; > + > + data->odr = odr; > + adxl355_fill_3db_frequency_table(data); > + > +out_unlock: > + ret = adxl355_set_op_mode(data, ADXL355_MEASUREMENT); > + mutex_unlock(&data->lock); > + return ret; > +} > + > +static int adxl355_set_hpf_3db(struct adxl355_data *data, > + enum adxl355_hpf_3db hpf) > +{ > + int ret = 0; > + > + mutex_lock(&data->lock); > + > + if (data->hpf_3db == hpf) > + goto out_unlock; If we follow this goto, we have not yet changed the mode of the device, so we shouldn't change it back again. I would suggest two labels to allow us to just unlock in this error case, but also do the op_mode change for the other cases. > + > + ret = adxl355_set_op_mode(data, ADXL355_STANDBY); > + if (ret < 0) > + goto out_unlock; > + > + ret = regmap_update_bits(data->regmap, ADXL355_FILTER, > + ADXL355_FILTER_HPF_MSK, > + FIELD_PREP(ADXL355_FILTER_HPF_MSK, hpf)); > + if (!ret) > + data->hpf_3db = hpf; > + > +out_unlock: > + ret = adxl355_set_op_mode(data, ADXL355_MEASUREMENT); > + mutex_unlock(&data->lock); > + return ret; > +} > + > +static int adxl355_set_calibbias(struct adxl355_data *data, > + int channel2, int calibbias) > +{ > + int ret = 0; > + > + data->transf_buf[0] = (calibbias >> 8) & 0xFF; > + data->transf_buf[1] = calibbias & 0xFF; One more case for put_unaligned_be16(). If you don't do it now, it'll get picked up by one of the people who really like clearing this stuff up the moment it goes upstream anyway. > + data->transf_buf[2] = 0; > + > + mutex_lock(&data->lock); > + > + ret = adxl355_set_op_mode(data, ADXL355_STANDBY); > + if (ret < 0) > + goto out_unlock; > + > + switch (channel2) { I mention below that you should consider using an enum in the chan->address field and having done that, use it to index into an array of structures that have the registers, plus you can also use it to index into data->calibbias[3]. That changes this code to look something like enum adxl355_chans { chan_x, chan_y, chan_z }; struct adxl355_chan_info { u8 data_reg; u8 offset_reg; }; static const struct adxl355_chan_info adxl355_chans[] = { [chan_x] = { ... }, [chan_y] = {... }; ret = regmap_bulk_write(data->regmap, adxl355_chan_info[chan].offset_reg, data_trans_buf, 2); if (ret < 0) goto out_unlock; data->calibbias[chan] = calibbias; ... So you move a lot of the information about the device into static tables rather than dynamic code. Things tend to end up simpler that way. The case for this modification in this particular driver is lower than many because it only really has a couple of per channel registers, but I think it still worth doing (at least partly because other people may well copy your code in future!) > + case IIO_MOD_X: > + ret = regmap_bulk_write(data->regmap, ADXL355_OFFSET_X_H, > + data->transf_buf, 2); > + if (ret < 0) > + goto out_unlock; > + data->x_calibbias = calibbias; > + break; > + case IIO_MOD_Y: > + ret = regmap_bulk_write(data->regmap, ADXL355_OFFSET_Y_H, > + data->transf_buf, 2); > + if (ret < 0) > + goto out_unlock; > + data->y_calibbias = calibbias; > + break; > + case IIO_MOD_Z: > + ret = regmap_bulk_write(data->regmap, ADXL355_OFFSET_Z_H, > + data->transf_buf, 2); > + if (ret < 0) > + goto out_unlock; > + data->z_calibbias = calibbias; > + break; > + default: > + ret = -EINVAL; > + break; > + } > + > +out_unlock: > + ret = adxl355_set_op_mode(data, ADXL355_MEASUREMENT); > + mutex_unlock(&data->lock); > + return ret; > +} > + > +static int adxl355_read_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, > + int *val, int *val2, long mask) > +{ > + struct adxl355_data *data = iio_priv(indio_dev); > + int ret; > + > + switch (mask) { > + case IIO_CHAN_INFO_RAW: > + switch (chan->type) { > + case IIO_TEMP: > + ret = adxl355_get_temp_data(data, chan->address); > + if (ret < 0) > + return ret; > + *val = get_unaligned_be16(data->transf_buf); > + > + return IIO_VAL_INT; > + case IIO_ACCEL: > + ret = adxl355_read_axis(data, chan->address); > + if (ret < 0) > + return ret; > + *val = sign_extend32(ret >> (chan->scan_type.shift), Drop the extra brackets. > + chan->scan_type.realbits - 1); > + return IIO_VAL_INT; > + default: > + return -EINVAL; > + } > + > + case IIO_CHAN_INFO_SCALE: > + switch (chan->type) { > + case IIO_TEMP: > + *val = TEMP_SCALE_VAL; > + *val2 = TEMP_SCALE_VAL2; > + return IIO_VAL_INT_PLUS_MICRO; > + case IIO_ACCEL: > + *val = 0; > + *val2 = ADXL355_NSCALE; > + return IIO_VAL_INT_PLUS_NANO; > + default: > + return -EINVAL; > + } > + case IIO_CHAN_INFO_OFFSET: > + *val = TEMP_OFFSET_VAL; > + *val2 = TEMP_OFFSET_VAL2; > + return IIO_VAL_INT_PLUS_MICRO; > + case IIO_CHAN_INFO_CALIBBIAS: > + if (chan->channel2 == IIO_MOD_X) > + *val = data->x_calibbias; > + else if (chan->channel2 == IIO_MOD_Y) > + *val = data->y_calibbias; > + else > + *val = data->z_calibbias; Whilst it is clearly more code, a switch statement would be better here as it would make it clear there are 3 valid options to pick between. > + *val = sign_extend32(*val, 15); > + return IIO_VAL_INT; > + case IIO_CHAN_INFO_SAMP_FREQ: > + *val = adxl355_odr_table[data->odr][0]; > + *val2 = adxl355_odr_table[data->odr][1]; > + return IIO_VAL_INT_PLUS_MICRO; > + case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY: > + *val = data->adxl355_hpf_3db_table[data->hpf_3db][0]; > + *val2 = data->adxl355_hpf_3db_table[data->hpf_3db][1]; > + return IIO_VAL_INT_PLUS_MICRO; > + default: > + return -EINVAL; > + } > +} > + > +static int adxl355_write_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, > + int val, int val2, long mask) > +{ > + struct adxl355_data *data = iio_priv(indio_dev); > + int odr_idx, hpf_idx, calibbias; > + > + switch (mask) { > + case IIO_CHAN_INFO_SAMP_FREQ: > + odr_idx = adxl355_find_match(adxl355_odr_table, > + ARRAY_SIZE(adxl355_odr_table), > + val, val2); > + if (odr_idx < 0) > + return odr_idx; > + > + return adxl355_set_odr(data, odr_idx); > + case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY: > + hpf_idx = adxl355_find_match(data->adxl355_hpf_3db_table, > + ARRAY_SIZE(data->adxl355_hpf_3db_table), > + val, val2); > + if (hpf_idx < 0) > + return hpf_idx; > + > + return adxl355_set_hpf_3db(data, hpf_idx); > + case IIO_CHAN_INFO_CALIBBIAS: > + calibbias = clamp_t(int, val, S16_MIN, S16_MAX); > + > + return adxl355_set_calibbias(data, chan->channel2, calibbias); > + default: > + return -EINVAL; > + } > +} > + > +static int adxl355_read_avail(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, > + const int **vals, int *type, int *length, > + long mask) > +{ > + struct adxl355_data *data = iio_priv(indio_dev); > + > + switch (mask) { > + case IIO_CHAN_INFO_SAMP_FREQ: > + *vals = (const int *)adxl355_odr_table; > + *type = IIO_VAL_INT_PLUS_MICRO; > + /* Values are stored in a 2D matrix */ > + *length = ARRAY_SIZE(adxl355_odr_table) * 2; > + > + return IIO_AVAIL_LIST; > + case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY: > + *vals = (const int *)(data->adxl355_hpf_3db_table); Extra brackets not needed (see the equivalent for *vals above). > + *type = IIO_VAL_INT_PLUS_MICRO; > + /* Values are stored in a 2D matrix */ > + *length = ARRAY_SIZE(data->adxl355_hpf_3db_table) * 2; > + > + return IIO_AVAIL_LIST; > + default: > + return -EINVAL; > + } > +} > + > +static const unsigned long adxl355_avail_scan_masks[] = { > + GENMASK(3, 0), > + 0 > +}; > + > +static const struct iio_info adxl355_info = { > + .read_raw = adxl355_read_raw, > + .write_raw = adxl355_write_raw, > + .read_avail = &adxl355_read_avail > +}; > + > +#define ADXL355_ACCEL_CHANNEL(index, reg, axis) { \ > + .type = IIO_ACCEL, \ > + .address = reg, \ > + .modified = 1, \ > + .channel2 = IIO_MOD_##axis, \ > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ > + BIT(IIO_CHAN_INFO_CALIBBIAS), \ > + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ > + BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ > + BIT(IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY), \ > + .info_mask_shared_by_type_available = \ > + BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ > + BIT(IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY), \ > + .scan_index = index, \ > + .scan_type = { \ > + .sign = 's', \ > + .realbits = 20, \ > + .storagebits = 32, \ > + .shift = 4, \ > + .endianness = IIO_BE, \ > + } \ > +} > + > +static const struct iio_chan_spec adxl355_channels[] = { > + ADXL355_ACCEL_CHANNEL(0, ADXL355_XDATA3, X), Rather than directly using the data register, I would suggest some indirection. So instead use an enum value here, and then index into a static const array of structures that provide everything register specific. That will give you a clean way to later support things like the per axis offsets, > + ADXL355_ACCEL_CHANNEL(1, ADXL355_YDATA3, Y), > + ADXL355_ACCEL_CHANNEL(2, ADXL355_ZDATA3, Z), > + { > + .type = IIO_TEMP, > + .address = ADXL355_TEMP2, > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | > + BIT(IIO_CHAN_INFO_SCALE) | > + BIT(IIO_CHAN_INFO_OFFSET), > + .scan_index = 3, Keep the introduction of scan_index for when you add buffer support. > + .scan_type = { > + .sign = 's', > + .realbits = 12, > + .storagebits = 16, > + .endianness = IIO_BE, Given you do use some of the scan_type fields already, I guess keeping the rest isn't too bad.. > + }, > + } > +}; > + > +int adxl355_core_probe(struct device *dev, struct regmap *regmap, > + const char *name) > +{ > + struct adxl355_data *data; > + struct iio_dev *indio_dev; > + int ret; > + > + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); > + if (!indio_dev) > + return -ENOMEM; > + > + data = iio_priv(indio_dev); > + data->regmap = regmap; > + data->dev = dev; > + data->op_mode = ADXL355_STANDBY; > + mutex_init(&data->lock); > + > + indio_dev->name = name; > + indio_dev->info = &adxl355_info; > + indio_dev->modes = INDIO_DIRECT_MODE; > + indio_dev->channels = adxl355_channels; > + indio_dev->num_channels = ARRAY_SIZE(adxl355_channels); > + indio_dev->available_scan_masks = adxl355_avail_scan_masks; Please leave introducing available_scan_masks until it can be part of the patch adding buffered support. That way we'll know there are restrictions on it whilst reading that patch. > + > + ret = adxl355_setup(data); > + if (ret < 0) { > + dev_err(dev, "ADXL355 setup failed\n"); > + return ret; > + } > + > + return devm_iio_device_register(dev, indio_dev); > +} > +EXPORT_SYMBOL_GPL(adxl355_core_probe); > + > +MODULE_AUTHOR("Puranjay Mohan <puranjay12@gmail.com>"); > +MODULE_DESCRIPTION("ADXL355 3-Axis Digital Accelerometer core driver"); > +MODULE_LICENSE("GPL v2"); > diff --git a/drivers/iio/accel/adxl355_i2c.c b/drivers/iio/accel/adxl355_i2c.c > new file mode 100644 > index 000000000..6b84d8df2 > --- /dev/null > +++ b/drivers/iio/accel/adxl355_i2c.c > @@ -0,0 +1,63 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * ADXL355 3-Axis Digital Accelerometer I2C driver > + * > + * Copyright (c) 2021 Puranjay Mohan <puranjay12@gmail.com> > + */ > + > +#include <linux/i2c.h> > +#include <linux/module.h> > +#include <linux/regmap.h> > + > +#include "adxl355.h" > + > +static const struct regmap_config adxl355_i2c_regmap_config = { > + .reg_bits = 8, > + .val_bits = 8, > + .max_register = 0x2F, > + .rd_table = &adxl355_readable_regs_tbl, > + .wr_table = &adxl355_writeable_regs_tbl > +}; > + > +static int adxl355_i2c_probe(struct i2c_client *client) > +{ > + struct regmap *regmap; > + > + regmap = devm_regmap_init_i2c(client, &adxl355_i2c_regmap_config); > + if (IS_ERR(regmap)) { > + dev_err(&client->dev, "Error initializing i2c regmap: %ld\n", > + PTR_ERR(regmap)); > + return PTR_ERR(regmap); > + } > + > + return adxl355_core_probe(&client->dev, regmap, client->name); > +} > + > +static const struct i2c_device_id adxl355_i2c_id[] = { > + { "adxl355", 0 }, > + { } > +}; > + > +MODULE_DEVICE_TABLE(i2c, adxl355_i2c_id); > + > +static const struct of_device_id adxl355_of_match[] = { > + { .compatible = "adi,adxl355" }, > + { } > +}; > + > +MODULE_DEVICE_TABLE(of, adxl355_of_match); > + > +static struct i2c_driver adxl355_i2c_driver = { > + .driver = { > + .name = "adxl355_i2c", > + .of_match_table = adxl355_of_match, > + }, > + .probe_new = adxl355_i2c_probe, > + .id_table = adxl355_i2c_id, > +}; > + > +module_i2c_driver(adxl355_i2c_driver); > + > +MODULE_AUTHOR("Puranjay Mohan <puranjay12@gmail.com>"); > +MODULE_DESCRIPTION("ADXL355 3-Axis Digital Accelerometer I2C driver"); > +MODULE_LICENSE("GPL v2"); > diff --git a/drivers/iio/accel/adxl355_spi.c b/drivers/iio/accel/adxl355_spi.c > new file mode 100644 > index 000000000..108d1b308 > --- /dev/null > +++ b/drivers/iio/accel/adxl355_spi.c > @@ -0,0 +1,66 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * ADXL355 3-Axis Digital Accelerometer SPI driver > + * > + * Copyright (c) 2021 Puranjay Mohan <puranjay12@gmail.com> > + */ > + > +#include <linux/module.h> Good to also include mod_devicetable.h in both the i2c and spi parts for the id tables. > +#include <linux/regmap.h> > +#include <linux/spi/spi.h> > + > +#include "adxl355.h" > + > +static const struct regmap_config adxl355_spi_regmap_config = { > + .reg_bits = 7, > + .pad_bits = 1, > + .val_bits = 8, > + .read_flag_mask = BIT(0), > + .max_register = 0x2F, > + .rd_table = &adxl355_readable_regs_tbl, > + .wr_table = &adxl355_writeable_regs_tbl > +}; > + > +static int adxl355_spi_probe(struct spi_device *spi) > +{ > + const struct spi_device_id *id = spi_get_device_id(spi); > + struct regmap *regmap; > + > + regmap = devm_regmap_init_spi(spi, &adxl355_spi_regmap_config); > + if (IS_ERR(regmap)) { > + dev_err(&spi->dev, "Error initializing spi regmap: %ld\n", > + PTR_ERR(regmap)); > + return PTR_ERR(regmap); > + } > + > + return adxl355_core_probe(&spi->dev, regmap, id->name); > +} > + > +static const struct spi_device_id adxl355_spi_id[] = { > + { "adxl355", 0 }, > + { } > +}; > + > +MODULE_DEVICE_TABLE(spi, adxl355_spi_id); > + > +static const struct of_device_id adxl355_of_match[] = { > + { .compatible = "adi,adxl355" }, > + { } > +}; > + > +MODULE_DEVICE_TABLE(of, adxl355_of_match); > + > +static struct spi_driver adxl355_spi_driver = { > + .driver = { > + .name = "adxl355_spi", > + .of_match_table = adxl355_of_match, > + }, > + .probe = adxl355_spi_probe, > + .id_table = adxl355_spi_id, > +}; > + > +module_spi_driver(adxl355_spi_driver); > + > +MODULE_AUTHOR("Puranjay Mohan <puranjay12@gmail.com>"); > +MODULE_DESCRIPTION("ADXL355 3-Axis Digital Accelerometer SPI driver"); > +MODULE_LICENSE("GPL v2"); ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-07-31 15:46 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-07-28 6:34 [PATCH v6 0/2] iio: accel: add support for ADXL355 Puranjay Mohan 2021-07-28 6:34 ` [PATCH v6 1/2] dt-bindings: iio: accel: Add DT binding doc " Puranjay Mohan 2021-07-31 15:08 ` Jonathan Cameron 2021-07-28 6:34 ` [PATCH v6 2/2] iio: accel: Add driver support " Puranjay Mohan 2021-07-31 15:48 ` Jonathan Cameron
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).