[PATCH v4 0/5] iio/adc: ingenic: add support for the JZ4760(B) Socs to the ingenic sadc driver

[PATCH v4 0/5] iio/adc: ingenic: add support for the JZ4760(B) Socs to the ingenic sadc driver

[Christophe Branchereau]

This is a set of patches to add support to the JZ4760(B) socs found in numerous gaming handhelds and some
mp3 players to the ingenic-sadc driver.

Changelog for this v4:

Fix patch 4/5 that was missing the .compatible string for the jz4760b.

Christophe Branchereau (5):
  iio/adc: ingenic: rename has_aux2 to has_aux_md
  dt-bindings: iio/adc: add an INGENIC_ADC_AUX0 entry
  iio/adc: ingenic: add JZ4760 support to the sadc driver
  iio/adc: ingenic: add JZ4760B support to the sadc driver
  dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc
    Documentation

 .../bindings/iio/adc/ingenic,adc.yaml         |  19 ++++
 drivers/iio/adc/ingenic-adc.c                 | 102 ++++++++++++++++--
 include/dt-bindings/iio/adc/ingenic,adc.h     |   1 +
 3 files changed, 113 insertions(+), 9 deletions(-)

-- 
2.30.2

[PATCH v4 1/5] iio/adc: ingenic: rename has_aux2 to has_aux_md

[Christophe Branchereau]

The jz4760(b) socs have 3 aux channels.

The purpose of has_aux2 is to set the MD bits used to select
the AUX channel to be sampled, not to describe the hardware.

Rename it to a more appropriate name.

Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>

Reviewed-by: Paul Cercueil <paul@crapouillou.net>
---
 drivers/iio/adc/ingenic-adc.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/iio/adc/ingenic-adc.c b/drivers/iio/adc/ingenic-adc.c
index 34c03a264f74..40f2d8c2cf72 100644
--- a/drivers/iio/adc/ingenic-adc.c
+++ b/drivers/iio/adc/ingenic-adc.c
@@ -92,7 +92,7 @@ struct ingenic_adc_soc_data {
 	const int *battery_scale_avail;
 	size_t battery_scale_avail_size;
 	unsigned int battery_vref_mode: 1;
-	unsigned int has_aux2: 1;
+	unsigned int has_aux_md: 1;
 	const struct iio_chan_spec *channels;
 	unsigned int num_channels;
 	int (*init_clk_div)(struct device *dev, struct ingenic_adc *adc);
@@ -506,7 +506,7 @@ static const struct ingenic_adc_soc_data jz4725b_adc_soc_data = {
 	.battery_scale_avail = jz4725b_adc_battery_scale_avail,
 	.battery_scale_avail_size = ARRAY_SIZE(jz4725b_adc_battery_scale_avail),
 	.battery_vref_mode = true,
-	.has_aux2 = false,
+	.has_aux_md = false,
 	.channels = jz4740_channels,
 	.num_channels = ARRAY_SIZE(jz4740_channels),
 	.init_clk_div = jz4725b_adc_init_clk_div,
@@ -520,7 +520,7 @@ static const struct ingenic_adc_soc_data jz4740_adc_soc_data = {
 	.battery_scale_avail = jz4740_adc_battery_scale_avail,
 	.battery_scale_avail_size = ARRAY_SIZE(jz4740_adc_battery_scale_avail),
 	.battery_vref_mode = true,
-	.has_aux2 = false,
+	.has_aux_md = false,
 	.channels = jz4740_channels,
 	.num_channels = ARRAY_SIZE(jz4740_channels),
 	.init_clk_div = NULL, /* no ADCLK register on JZ4740 */
@@ -534,7 +534,7 @@ static const struct ingenic_adc_soc_data jz4770_adc_soc_data = {
 	.battery_scale_avail = jz4770_adc_battery_scale_avail,
 	.battery_scale_avail_size = ARRAY_SIZE(jz4770_adc_battery_scale_avail),
 	.battery_vref_mode = false,
-	.has_aux2 = true,
+	.has_aux_md = true,
 	.channels = jz4770_channels,
 	.num_channels = ARRAY_SIZE(jz4770_channels),
 	.init_clk_div = jz4770_adc_init_clk_div,
@@ -581,7 +581,7 @@ static int ingenic_adc_read_chan_info_raw(struct iio_dev *iio_dev,
 
 	/* We cannot sample AUX/AUX2 in parallel. */
 	mutex_lock(&adc->aux_lock);
-	if (adc->soc_data->has_aux2 && engine == 0) {
+	if (adc->soc_data->has_aux_md && engine == 0) {
 		bit = BIT(chan->channel == INGENIC_ADC_AUX2);
 		ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_AUX_MD, bit);
 	}
-- 
2.30.2

[PATCH v4 2/5] dt-bindings: iio/adc: add an INGENIC_ADC_AUX0 entry

[Christophe Branchereau]

The JZ4760(B) socs have 3 AUX inputs, add an entry to prepare including the one named AUX in the sadc driver.
Leaving the rest untouched as it's ABI.

Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>

Reviewed-by: Paul Cercueil <paul@crapouillou.net>
---
 include/dt-bindings/iio/adc/ingenic,adc.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/dt-bindings/iio/adc/ingenic,adc.h b/include/dt-bindings/iio/adc/ingenic,adc.h
index 4627a00e369e..a6ccc031635b 100644
--- a/include/dt-bindings/iio/adc/ingenic,adc.h
+++ b/include/dt-bindings/iio/adc/ingenic,adc.h
@@ -13,5 +13,6 @@
 #define INGENIC_ADC_TOUCH_YN	6
 #define INGENIC_ADC_TOUCH_XD	7
 #define INGENIC_ADC_TOUCH_YD	8
+#define INGENIC_ADC_AUX0	9
 
 #endif
-- 
2.30.2

Re: [PATCH v4 2/5] dt-bindings: iio/adc: add an INGENIC_ADC_AUX0 entry

[Rob Herring]

On Mon, 26 Jul 2021 10:20:30 +0200, Christophe Branchereau wrote:
> The JZ4760(B) socs have 3 AUX inputs, add an entry to prepare including the one named AUX in the sadc driver.
> Leaving the rest untouched as it's ABI.
> 
> Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
> 
> Reviewed-by: Paul Cercueil <paul@crapouillou.net>
> ---
>  include/dt-bindings/iio/adc/ingenic,adc.h | 1 +
>  1 file changed, 1 insertion(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

[PATCH v4 3/5] iio/adc: ingenic: add JZ4760 support to the sadc driver

[Christophe Branchereau]

The jz4760 sadc is very similar to the jz4770 one, but has a VREF of 2.5V
and 3 aux channels.

modify ingenic_adc_read_chan_info_raw() needs a change to account for it.

Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>

Reviewed-by: Paul Cercueil <paul@crapouillou.net>
---
 drivers/iio/adc/ingenic-adc.c | 82 +++++++++++++++++++++++++++++++++--
 1 file changed, 78 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/adc/ingenic-adc.c b/drivers/iio/adc/ingenic-adc.c
index 40f2d8c2cf72..6b9af0530590 100644
--- a/drivers/iio/adc/ingenic-adc.c
+++ b/drivers/iio/adc/ingenic-adc.c
@@ -71,6 +71,7 @@
 #define JZ4725B_ADC_BATTERY_HIGH_VREF_BITS	10
 #define JZ4740_ADC_BATTERY_HIGH_VREF		(7500 * 0.986)
 #define JZ4740_ADC_BATTERY_HIGH_VREF_BITS	12
+#define JZ4760_ADC_BATTERY_VREF			2500
 #define JZ4770_ADC_BATTERY_VREF			1200
 #define JZ4770_ADC_BATTERY_VREF_BITS		12
 
@@ -295,6 +296,10 @@ static const int jz4740_adc_battery_scale_avail[] = {
 	JZ_ADC_BATTERY_LOW_VREF, JZ_ADC_BATTERY_LOW_VREF_BITS,
 };
 
+static const int jz4760_adc_battery_scale_avail[] = {
+	JZ4760_ADC_BATTERY_VREF, JZ4770_ADC_BATTERY_VREF_BITS,
+};
+
 static const int jz4770_adc_battery_raw_avail[] = {
 	0, 1, (1 << JZ4770_ADC_BATTERY_VREF_BITS) - 1,
 };
@@ -400,6 +405,47 @@ static const struct iio_chan_spec jz4740_channels[] = {
 	},
 };
 
+static const struct iio_chan_spec jz4760_channels[] = {
+	{
+		.extend_name = "aux",
+		.type = IIO_VOLTAGE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE),
+		.indexed = 1,
+		.channel = INGENIC_ADC_AUX0,
+		.scan_index = -1,
+	},
+	{
+		.extend_name = "aux1",
+		.type = IIO_VOLTAGE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE),
+		.indexed = 1,
+		.channel = INGENIC_ADC_AUX,
+		.scan_index = -1,
+	},
+	{
+		.extend_name = "aux2",
+		.type = IIO_VOLTAGE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE),
+		.indexed = 1,
+		.channel = INGENIC_ADC_AUX2,
+		.scan_index = -1,
+	},
+	{
+		.extend_name = "battery",
+		.type = IIO_VOLTAGE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE),
+		.info_mask_separate_available = BIT(IIO_CHAN_INFO_RAW) |
+						BIT(IIO_CHAN_INFO_SCALE),
+		.indexed = 1,
+		.channel = INGENIC_ADC_BATTERY,
+		.scan_index = -1,
+	},
+};
+
 static const struct iio_chan_spec jz4770_channels[] = {
 	{
 		.type = IIO_VOLTAGE,
@@ -526,6 +572,20 @@ static const struct ingenic_adc_soc_data jz4740_adc_soc_data = {
 	.init_clk_div = NULL, /* no ADCLK register on JZ4740 */
 };
 
+static const struct ingenic_adc_soc_data jz4760_adc_soc_data = {
+	.battery_high_vref = JZ4760_ADC_BATTERY_VREF,
+	.battery_high_vref_bits = JZ4770_ADC_BATTERY_VREF_BITS,
+	.battery_raw_avail = jz4770_adc_battery_raw_avail,
+	.battery_raw_avail_size = ARRAY_SIZE(jz4770_adc_battery_raw_avail),
+	.battery_scale_avail = jz4760_adc_battery_scale_avail,
+	.battery_scale_avail_size = ARRAY_SIZE(jz4760_adc_battery_scale_avail),
+	.battery_vref_mode = false,
+	.has_aux_md = true,
+	.channels = jz4760_channels,
+	.num_channels = ARRAY_SIZE(jz4760_channels),
+	.init_clk_div = jz4770_adc_init_clk_div,
+};
+
 static const struct ingenic_adc_soc_data jz4770_adc_soc_data = {
 	.battery_high_vref = JZ4770_ADC_BATTERY_VREF,
 	.battery_high_vref_bits = JZ4770_ADC_BATTERY_VREF_BITS,
@@ -569,7 +629,7 @@ static int ingenic_adc_read_chan_info_raw(struct iio_dev *iio_dev,
 					  struct iio_chan_spec const *chan,
 					  int *val)
 {
-	int bit, ret, engine = (chan->channel == INGENIC_ADC_BATTERY);
+	int cmd, ret, engine = (chan->channel == INGENIC_ADC_BATTERY);
 	struct ingenic_adc *adc = iio_priv(iio_dev);
 
 	ret = clk_enable(adc->clk);
@@ -579,11 +639,22 @@ static int ingenic_adc_read_chan_info_raw(struct iio_dev *iio_dev,
 		return ret;
 	}
 
-	/* We cannot sample AUX/AUX2 in parallel. */
+	/* We cannot sample the aux channels in parallel. */
 	mutex_lock(&adc->aux_lock);
 	if (adc->soc_data->has_aux_md && engine == 0) {
-		bit = BIT(chan->channel == INGENIC_ADC_AUX2);
-		ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_AUX_MD, bit);
+		switch (chan->channel) {
+		case INGENIC_ADC_AUX0:
+			cmd = 0;
+			break;
+		case INGENIC_ADC_AUX:
+			cmd = 1;
+			break;
+		case INGENIC_ADC_AUX2:
+			cmd = 2;
+			break;
+		}
+
+		ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_AUX_MD, cmd);
 	}
 
 	ret = ingenic_adc_capture(adc, engine);
@@ -591,6 +662,7 @@ static int ingenic_adc_read_chan_info_raw(struct iio_dev *iio_dev,
 		goto out;
 
 	switch (chan->channel) {
+	case INGENIC_ADC_AUX0:
 	case INGENIC_ADC_AUX:
 	case INGENIC_ADC_AUX2:
 		*val = readw(adc->base + JZ_ADC_REG_ADSDAT);
@@ -621,6 +693,7 @@ static int ingenic_adc_read_raw(struct iio_dev *iio_dev,
 		return ingenic_adc_read_chan_info_raw(iio_dev, chan, val);
 	case IIO_CHAN_INFO_SCALE:
 		switch (chan->channel) {
+		case INGENIC_ADC_AUX0:
 		case INGENIC_ADC_AUX:
 		case INGENIC_ADC_AUX2:
 			*val = JZ_ADC_AUX_VREF;
@@ -832,6 +905,7 @@ static int ingenic_adc_probe(struct platform_device *pdev)
 static const struct of_device_id ingenic_adc_of_match[] = {
 	{ .compatible = "ingenic,jz4725b-adc", .data = &jz4725b_adc_soc_data, },
 	{ .compatible = "ingenic,jz4740-adc", .data = &jz4740_adc_soc_data, },
+	{ .compatible = "ingenic,jz4760-adc", .data = &jz4760_adc_soc_data, },
 	{ .compatible = "ingenic,jz4770-adc", .data = &jz4770_adc_soc_data, },
 	{ },
 };
-- 
2.30.2

[PATCH v4 4/5] iio/adc: ingenic: add JZ4760B support to the sadc driver

[Christophe Branchereau]

The JZ4760B variant differs slightly from the JZ4760: it has a bit called VBAT_SEL in the CFG register.

In order to correctly sample the battery voltage on existing handhelds using this SOC, the bit must be cleared.

We leave the possibility to set the bit, by using the "ingenic,use-internal-divider" in the devicetree.

Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
---
 drivers/iio/adc/ingenic-adc.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/iio/adc/ingenic-adc.c b/drivers/iio/adc/ingenic-adc.c
index 6b9af0530590..2b3912c6ca6b 100644
--- a/drivers/iio/adc/ingenic-adc.c
+++ b/drivers/iio/adc/ingenic-adc.c
@@ -37,6 +37,7 @@
 #define JZ_ADC_REG_CFG_SAMPLE_NUM(n)	((n) << 10)
 #define JZ_ADC_REG_CFG_PULL_UP(n)	((n) << 16)
 #define JZ_ADC_REG_CFG_CMD_SEL		BIT(22)
+#define JZ_ADC_REG_CFG_VBAT_SEL		BIT(30)
 #define JZ_ADC_REG_CFG_TOUCH_OPS_MASK	(BIT(31) | GENMASK(23, 10))
 #define JZ_ADC_REG_ADCLK_CLKDIV_LSB	0
 #define JZ4725B_ADC_REG_ADCLK_CLKDIV10US_LSB	16
@@ -879,6 +880,14 @@ static int ingenic_adc_probe(struct platform_device *pdev)
 	/* Put hardware in a known passive state. */
 	writeb(0x00, adc->base + JZ_ADC_REG_ENABLE);
 	writeb(0xff, adc->base + JZ_ADC_REG_CTRL);
+
+	/* JZ4760B specific */
+	if (device_property_present(dev, "ingenic,use-internal-divider"))
+		ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_VBAT_SEL,
+					    JZ_ADC_REG_CFG_VBAT_SEL);
+	else
+		ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_VBAT_SEL, 0);
+
 	usleep_range(2000, 3000); /* Must wait at least 2ms. */
 	clk_disable(adc->clk);
 
@@ -906,6 +915,7 @@ static const struct of_device_id ingenic_adc_of_match[] = {
 	{ .compatible = "ingenic,jz4725b-adc", .data = &jz4725b_adc_soc_data, },
 	{ .compatible = "ingenic,jz4740-adc", .data = &jz4740_adc_soc_data, },
 	{ .compatible = "ingenic,jz4760-adc", .data = &jz4760_adc_soc_data, },
+	{ .compatible = "ingenic,jz4760b-adc", .data = &jz4760_adc_soc_data, },
 	{ .compatible = "ingenic,jz4770-adc", .data = &jz4770_adc_soc_data, },
 	{ },
 };
-- 
2.30.2

[PATCH v4 5/5] dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation

[Christophe Branchereau]

Add both the jz4760 and jz4760b, plus a property to use the internal
divider on the b variant and document it.

Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
---
 .../bindings/iio/adc/ingenic,adc.yaml         | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
index 433a3fb55a2e..3eb7aa8822c3 100644
--- a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
@@ -23,6 +23,8 @@ properties:
     enum:
       - ingenic,jz4725b-adc
       - ingenic,jz4740-adc
+      - ingenic,jz4760-adc
+      - ingenic,jz4760b-adc
       - ingenic,jz4770-adc
 
   '#io-channel-cells':
@@ -43,6 +45,23 @@ properties:
   interrupts:
     maxItems: 1
 
+  ingenic,use-internal-divider:
+    description:
+      If present, battery voltage is read from the VBAT_IR pin, which has an
+      internal 1/4 divider. If absent, it is read through the VBAT_ER pin,
+      which does not have such a divider.
+    type: boolean
+
+if:
+  not:
+    properties:
+      compatible:
+        contains:
+          const: ingenic,jz4760b-adc
+then:
+  properties:
+    ingenic,use-internal-divider: false
+
 required:
   - compatible
   - '#io-channel-cells'
-- 
2.30.2

Re: [PATCH v4 5/5] dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation

[Rob Herring]

On Mon, 26 Jul 2021 10:20:33 +0200, Christophe Branchereau wrote:
> Add both the jz4760 and jz4760b, plus a property to use the internal
> divider on the b variant and document it.
> 
> Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
> ---
>  .../bindings/iio/adc/ingenic,adc.yaml         | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v4 0/5] iio/adc: ingenic: add support for the JZ4760(B) Socs to the ingenic sadc driver

[Jonathan Cameron]

On Mon, 26 Jul 2021 10:20:28 +0200
Christophe Branchereau <cbranchereau@gmail.com> wrote:

> This is a set of patches to add support to the JZ4760(B) socs found in numerous gaming handhelds and some
> mp3 players to the ingenic-sadc driver.
> 
> Changelog for this v4:
> 
> Fix patch 4/5 that was missing the .compatible string for the jz4760b.

Series applied to the togreg branch of iio.git which will first be pushed out as testing
to see if 0-day can find anything we missed.

Thanks,

Jonathan

> 
> Christophe Branchereau (5):
>   iio/adc: ingenic: rename has_aux2 to has_aux_md
>   dt-bindings: iio/adc: add an INGENIC_ADC_AUX0 entry
>   iio/adc: ingenic: add JZ4760 support to the sadc driver
>   iio/adc: ingenic: add JZ4760B support to the sadc driver
>   dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc
>     Documentation
> 
>  .../bindings/iio/adc/ingenic,adc.yaml         |  19 ++++
>  drivers/iio/adc/ingenic-adc.c                 | 102 ++++++++++++++++--
>  include/dt-bindings/iio/adc/ingenic,adc.h     |   1 +
>  3 files changed, 113 insertions(+), 9 deletions(-)
>