linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dmitry Osipenko <digetx@gmail.com>
To: Thierry Reding <treding@nvidia.com>,
	Jonathan Hunter <jonathanh@nvidia.com>,
	Mark Brown <broonie@kernel.org>,
	Laxman Dewangan <ldewangan@nvidia.com>
Cc: linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-tegra@vger.kernel.org
Subject: [PATCH v2 1/2] spi: tegra20-slink: Improve runtime PM usage
Date: Sat, 31 Jul 2021 22:27:30 +0300	[thread overview]
Message-ID: <20210731192731.5869-1-digetx@gmail.com> (raw)

The Tegra SPI driver supports runtime PM, which controls the clock
enable state, but the clk is also enabled separately from the RPM
at the driver probe time, and thus, stays always on. Fix it.

Runtime PM now is always available on Tegra, hence there is no need to
check the RPM presence in the driver anymore. Remove these checks.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---

Changelog:

v2: - No changes.

 drivers/spi/spi-tegra20-slink.c | 73 +++++++++++----------------------
 1 file changed, 25 insertions(+), 48 deletions(-)

diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c
index 6a726c95ac7a..501eca1d0f89 100644
--- a/drivers/spi/spi-tegra20-slink.c
+++ b/drivers/spi/spi-tegra20-slink.c
@@ -1061,33 +1061,12 @@ static int tegra_slink_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "Can not get clock %d\n", ret);
 		goto exit_free_master;
 	}
-	ret = clk_prepare(tspi->clk);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Clock prepare failed %d\n", ret);
-		goto exit_free_master;
-	}
-	ret = clk_enable(tspi->clk);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Clock enable failed %d\n", ret);
-		goto exit_clk_unprepare;
-	}
-
-	spi_irq = platform_get_irq(pdev, 0);
-	tspi->irq = spi_irq;
-	ret = request_threaded_irq(tspi->irq, tegra_slink_isr,
-			tegra_slink_isr_thread, IRQF_ONESHOT,
-			dev_name(&pdev->dev), tspi);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Failed to register ISR for IRQ %d\n",
-					tspi->irq);
-		goto exit_clk_disable;
-	}
 
 	tspi->rst = devm_reset_control_get_exclusive(&pdev->dev, "spi");
 	if (IS_ERR(tspi->rst)) {
 		dev_err(&pdev->dev, "can not get reset\n");
 		ret = PTR_ERR(tspi->rst);
-		goto exit_free_irq;
+		goto exit_free_master;
 	}
 
 	tspi->max_buf_size = SLINK_FIFO_DEPTH << 2;
@@ -1095,7 +1074,7 @@ static int tegra_slink_probe(struct platform_device *pdev)
 
 	ret = tegra_slink_init_dma_param(tspi, true);
 	if (ret < 0)
-		goto exit_free_irq;
+		goto exit_free_master;
 	ret = tegra_slink_init_dma_param(tspi, false);
 	if (ret < 0)
 		goto exit_rx_dma_free;
@@ -1106,16 +1085,9 @@ static int tegra_slink_probe(struct platform_device *pdev)
 	init_completion(&tspi->xfer_completion);
 
 	pm_runtime_enable(&pdev->dev);
-	if (!pm_runtime_enabled(&pdev->dev)) {
-		ret = tegra_slink_runtime_resume(&pdev->dev);
-		if (ret)
-			goto exit_pm_disable;
-	}
-
-	ret = pm_runtime_get_sync(&pdev->dev);
-	if (ret < 0) {
+	ret = pm_runtime_resume_and_get(&pdev->dev);
+	if (ret) {
 		dev_err(&pdev->dev, "pm runtime get failed, e = %d\n", ret);
-		pm_runtime_put_noidle(&pdev->dev);
 		goto exit_pm_disable;
 	}
 
@@ -1123,33 +1095,43 @@ static int tegra_slink_probe(struct platform_device *pdev)
 	udelay(2);
 	reset_control_deassert(tspi->rst);
 
+	spi_irq = platform_get_irq(pdev, 0);
+	tspi->irq = spi_irq;
+	ret = request_threaded_irq(tspi->irq, tegra_slink_isr,
+				   tegra_slink_isr_thread, IRQF_ONESHOT,
+				   dev_name(&pdev->dev), tspi);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to register ISR for IRQ %d\n",
+			tspi->irq);
+		goto exit_pm_put;
+	}
+
 	tspi->def_command_reg  = SLINK_M_S;
 	tspi->def_command2_reg = SLINK_CS_ACTIVE_BETWEEN;
 	tegra_slink_writel(tspi, tspi->def_command_reg, SLINK_COMMAND);
 	tegra_slink_writel(tspi, tspi->def_command2_reg, SLINK_COMMAND2);
-	pm_runtime_put(&pdev->dev);
 
 	master->dev.of_node = pdev->dev.of_node;
 	ret = devm_spi_register_master(&pdev->dev, master);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "can not register to master err %d\n", ret);
-		goto exit_pm_disable;
+		goto exit_free_irq;
 	}
+
+	pm_runtime_put(&pdev->dev);
+
 	return ret;
 
+exit_free_irq:
+	free_irq(spi_irq, tspi);
+exit_pm_put:
+	pm_runtime_put(&pdev->dev);
 exit_pm_disable:
 	pm_runtime_disable(&pdev->dev);
-	if (!pm_runtime_status_suspended(&pdev->dev))
-		tegra_slink_runtime_suspend(&pdev->dev);
+
 	tegra_slink_deinit_dma_param(tspi, false);
 exit_rx_dma_free:
 	tegra_slink_deinit_dma_param(tspi, true);
-exit_free_irq:
-	free_irq(spi_irq, tspi);
-exit_clk_disable:
-	clk_disable(tspi->clk);
-exit_clk_unprepare:
-	clk_unprepare(tspi->clk);
 exit_free_master:
 	spi_master_put(master);
 	return ret;
@@ -1162,8 +1144,7 @@ static int tegra_slink_remove(struct platform_device *pdev)
 
 	free_irq(tspi->irq, tspi);
 
-	clk_disable(tspi->clk);
-	clk_unprepare(tspi->clk);
+	pm_runtime_disable(&pdev->dev);
 
 	if (tspi->tx_dma_chan)
 		tegra_slink_deinit_dma_param(tspi, false);
@@ -1171,10 +1152,6 @@ static int tegra_slink_remove(struct platform_device *pdev)
 	if (tspi->rx_dma_chan)
 		tegra_slink_deinit_dma_param(tspi, true);
 
-	pm_runtime_disable(&pdev->dev);
-	if (!pm_runtime_status_suspended(&pdev->dev))
-		tegra_slink_runtime_suspend(&pdev->dev);
-
 	return 0;
 }
 
-- 
2.32.0


             reply	other threads:[~2021-07-31 19:28 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-31 19:27 Dmitry Osipenko [this message]
2021-07-31 19:27 ` [PATCH v2 2/2] spi: tegra20-slink: Don't use resource-managed spi_register helper Dmitry Osipenko
2021-08-09 13:06 ` [PATCH v2 1/2] spi: tegra20-slink: Improve runtime PM usage Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210731192731.5869-1-digetx@gmail.com \
    --to=digetx@gmail.com \
    --cc=broonie@kernel.org \
    --cc=jonathanh@nvidia.com \
    --cc=ldewangan@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=treding@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).