From: Maxim Levitsky <mlevitsk@redhat.com>
To: kvm@vger.kernel.org
Cc: Wanpeng Li <wanpengli@tencent.com>,
Thomas Gleixner <tglx@linutronix.de>,
Joerg Roedel <joro@8bytes.org>, Borislav Petkov <bp@alien8.de>,
Sean Christopherson <seanjc@google.com>,
Jim Mattson <jmattson@google.com>,
x86@kernel.org (maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)),
linux-kernel@vger.kernel.org (open list:X86 ARCHITECTURE (32-BIT
AND 64-BIT)),
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>,
Vitaly Kuznetsov <vkuznets@redhat.com>,
Ingo Molnar <mingo@redhat.com>, "H. Peter Anvin" <hpa@zytor.com>,
Paolo Bonzini <pbonzini@redhat.com>,
Maxim Levitsky <mlevitsk@redhat.com>
Subject: [PATCH v3 12/12] KVM: SVM: AVIC: drop unsupported AVIC base relocation code
Date: Mon, 2 Aug 2021 21:33:29 +0300 [thread overview]
Message-ID: <20210802183329.2309921-13-mlevitsk@redhat.com> (raw)
In-Reply-To: <20210802183329.2309921-1-mlevitsk@redhat.com>
APIC base relocation is not supported anyway and won't work
correctly so just drop the code that handles it and keep AVIC
MMIO bar at the default APIC base.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
---
arch/x86/kvm/svm/avic.c | 2 ++
arch/x86/kvm/svm/svm.c | 7 -------
arch/x86/kvm/svm/svm.h | 6 ------
3 files changed, 2 insertions(+), 13 deletions(-)
diff --git a/arch/x86/kvm/svm/avic.c b/arch/x86/kvm/svm/avic.c
index a39f7888b587..d3e3b0bbcbab 100644
--- a/arch/x86/kvm/svm/avic.c
+++ b/arch/x86/kvm/svm/avic.c
@@ -219,6 +219,8 @@ void avic_init_vmcb(struct vcpu_svm *svm)
vmcb->control.avic_logical_id = lpa & AVIC_HPA_MASK;
vmcb->control.avic_physical_id = ppa & AVIC_HPA_MASK;
vmcb->control.avic_physical_id |= AVIC_MAX_PHYSICAL_ID_COUNT;
+ vmcb->control.avic_vapic_bar = APIC_DEFAULT_PHYS_BASE & VMCB_AVIC_APIC_BAR_MASK;
+
if (kvm_apicv_activated(svm->vcpu.kvm))
vmcb->control.int_ctl |= AVIC_ENABLE_MASK;
else
diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index 61b5faba36cf..fab55f7d59ca 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -1316,9 +1316,6 @@ static void svm_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)
svm->virt_spec_ctrl = 0;
init_vmcb(vcpu);
-
- if (kvm_vcpu_apicv_active(vcpu) && !init_event)
- avic_update_vapic_bar(svm, APIC_DEFAULT_PHYS_BASE);
}
void svm_switch_vmcb(struct vcpu_svm *svm, struct kvm_vmcb_info *target_vmcb)
@@ -2970,10 +2967,6 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr)
svm->msr_decfg = data;
break;
}
- case MSR_IA32_APICBASE:
- if (kvm_vcpu_apicv_active(vcpu))
- avic_update_vapic_bar(to_svm(vcpu), data);
- fallthrough;
default:
return kvm_set_msr_common(vcpu, msr);
}
diff --git a/arch/x86/kvm/svm/svm.h b/arch/x86/kvm/svm/svm.h
index aae851762b59..524d943f3efc 100644
--- a/arch/x86/kvm/svm/svm.h
+++ b/arch/x86/kvm/svm/svm.h
@@ -503,12 +503,6 @@ extern struct kvm_x86_nested_ops svm_nested_ops;
#define VMCB_AVIC_APIC_BAR_MASK 0xFFFFFFFFFF000ULL
-static inline void avic_update_vapic_bar(struct vcpu_svm *svm, u64 data)
-{
- svm->vmcb->control.avic_vapic_bar = data & VMCB_AVIC_APIC_BAR_MASK;
- vmcb_mark_dirty(svm->vmcb, VMCB_AVIC);
-}
-
static inline bool avic_vcpu_is_running(struct kvm_vcpu *vcpu)
{
struct vcpu_svm *svm = to_svm(vcpu);
--
2.26.3
prev parent reply other threads:[~2021-08-02 18:34 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-02 18:33 [PATCH v3 00/12] My AVIC patch queue Maxim Levitsky
2021-08-02 18:33 ` [PATCH v3 01/12] Revert "KVM: x86/mmu: Allow zap gfn range to operate under the mmu read lock" Maxim Levitsky
2021-08-03 8:05 ` Paolo Bonzini
2021-08-03 15:11 ` Sean Christopherson
2021-08-03 17:29 ` Paolo Bonzini
2021-08-02 18:33 ` [PATCH v3 02/12] KVM: x86/mmu: bump mmu notifier count in kvm_zap_gfn_range Maxim Levitsky
2021-08-03 9:00 ` Paolo Bonzini
2021-08-02 18:33 ` [PATCH v3 03/12] KVM: x86/mmu: rename try_async_pf to kvm_faultin_pfn Maxim Levitsky
2021-08-03 9:00 ` Paolo Bonzini
2021-08-02 18:33 ` [PATCH v3 04/12] KVM: x86/mmu: allow kvm_faultin_pfn to return page fault handling code Maxim Levitsky
2021-08-03 9:00 ` Paolo Bonzini
2021-08-02 18:33 ` [PATCH v3 05/12] KVM: x86/mmu: allow APICv memslot to be partially enabled Maxim Levitsky
2021-08-03 9:12 ` Paolo Bonzini
2021-08-02 18:33 ` [PATCH v3 06/12] KVM: x86: don't disable APICv memslot when inhibited Maxim Levitsky
2021-08-03 8:44 ` Paolo Bonzini
2021-08-09 18:51 ` Maxim Levitsky
2021-08-09 19:14 ` Sean Christopherson
2021-08-02 18:33 ` [PATCH v3 07/12] KVM: x86: APICv: fix race in kvm_request_apicv_update on SVM Maxim Levitsky
2021-08-02 18:33 ` [PATCH v3 08/12] KVM: SVM: add warning for mistmatch between AVIC state and AVIC access page state Maxim Levitsky
2021-08-03 8:45 ` Paolo Bonzini
2021-08-02 18:33 ` [PATCH v3 09/12] KVM: x86: hyper-v: Deactivate APICv only when AutoEOI feature is in use Maxim Levitsky
2021-08-03 8:47 ` Paolo Bonzini
2021-08-03 9:01 ` Paolo Bonzini
2021-08-03 9:11 ` Paolo Bonzini
2021-08-02 18:33 ` [PATCH v3 10/12] KVM: SVM: remove svm_toggle_avic_for_irq_window Maxim Levitsky
2021-08-03 9:11 ` Paolo Bonzini
2021-08-02 18:33 ` [PATCH v3 11/12] KVM: SVM: call avic_vcpu_load/avic_vcpu_put when enabling/disabling AVIC Maxim Levitsky
2021-08-03 9:00 ` Paolo Bonzini
2021-08-02 18:33 ` Maxim Levitsky [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210802183329.2309921-13-mlevitsk@redhat.com \
--to=mlevitsk@redhat.com \
--cc=bp@alien8.de \
--cc=hpa@zytor.com \
--cc=jmattson@google.com \
--cc=joro@8bytes.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=pbonzini@redhat.com \
--cc=seanjc@google.com \
--cc=suravee.suthikulpanit@amd.com \
--cc=tglx@linutronix.de \
--cc=vkuznets@redhat.com \
--cc=wanpengli@tencent.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).