linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Viresh Kumar <viresh.kumar@linaro.org>
To: Hector Yuan <hector.yuan@mediatek.com>
Cc: linux-mediatek@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org,
	"Rafael J. Wysocki" <rjw@rjwysocki.net>,
	Rob Herring <robh+dt@kernel.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	wsd_upstream@mediatek.com
Subject: Re: [PATCH v13 2/2] cpufreq: mediatek-hw: Add support for CPUFREQ HW
Date: Tue, 3 Aug 2021 12:43:02 +0530	[thread overview]
Message-ID: <20210803071302.b4ttoqgqdq4dfmwe@vireshk-i7> (raw)
In-Reply-To: <1627574891-26514-3-git-send-email-hector.yuan@mediatek.com>

On 30-07-21, 00:08, Hector Yuan wrote:
> From: "Hector.Yuan" <hector.yuan@mediatek.com>
> 
> Add cpufreq HW support

Please write a proper commit log, what you are adding and which SoCs
it will apply to. Also add a full stop (.) at the end.

> Signed-off-by: Hector.Yuan <hector.yuan@mediatek.com>
> ---
>  drivers/cpufreq/Kconfig.arm           |   12 ++
>  drivers/cpufreq/Makefile              |    1 +
>  drivers/cpufreq/mediatek-cpufreq-hw.c |  357 +++++++++++++++++++++++++++++++++
>  include/linux/cpufreq.h               |   39 ++++

The changes to cpufreq.h should be done in a separate patch.

> diff --git a/drivers/cpufreq/mediatek-cpufreq-hw.c b/drivers/cpufreq/mediatek-cpufreq-hw.c
> new file mode 100644
> index 0000000..ca50a3a
> --- /dev/null
> +++ b/drivers/cpufreq/mediatek-cpufreq-hw.c
> @@ -0,0 +1,357 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2020 MediaTek Inc.
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/cpufreq.h>
> +#include <linux/energy_model.h>
> +#include <linux/init.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/of_platform.h>
> +#include <linux/pm_qos.h>
> +#include <linux/slab.h>
> +
> +#define LUT_MAX_ENTRIES			32U
> +#define LUT_FREQ			GENMASK(11, 0)
> +#define LUT_ROW_SIZE			0x4
> +#define CPUFREQ_HW_STATUS		BIT(0)
> +#define SVS_HW_STATUS			BIT(1)
> +#define POLL_USEC			1000
> +#define TIMEOUT_USEC			300000
> +
> +enum {
> +	REG_FREQ_LUT_TABLE,
> +	REG_FREQ_ENABLE,
> +	REG_FREQ_PERF_STATE,
> +	REG_FREQ_HW_STATE,
> +	REG_EM_POWER_TBL,
> +	REG_FREQ_LATENCY,
> +
> +	REG_ARRAY_SIZE,
> +};
> +
> +struct cpufreq_mtk {
> +	struct cpufreq_frequency_table *table;
> +	void __iomem *reg_bases[REG_ARRAY_SIZE];
> +	int nr_opp;
> +	cpumask_t related_cpus;
> +};
> +
> +static const u16 cpufreq_mtk_offsets[REG_ARRAY_SIZE] = {
> +	[REG_FREQ_LUT_TABLE]	= 0x0,
> +	[REG_FREQ_ENABLE]	= 0x84,
> +	[REG_FREQ_PERF_STATE]	= 0x88,
> +	[REG_FREQ_HW_STATE]	= 0x8c,
> +	[REG_EM_POWER_TBL]	= 0x90,
> +	[REG_FREQ_LATENCY]	= 0x110,
> +};
> +
> +static struct cpufreq_mtk *mtk_freq_domain_map[NR_CPUS];
> +
> +static int __maybe_unused
> +mtk_cpufreq_get_cpu_power(unsigned long *mW,
> +			  unsigned long *KHz, struct device *cpu_dev)
> +{
> +	struct cpufreq_mtk *c;
> +	struct cpufreq_policy *policy;
> +	int i;
> +
> +	policy = cpufreq_cpu_get_raw(cpu_dev->id);
> +	if (!policy)
> +		return 0;
> +
> +	c = mtk_freq_domain_map[policy->cpu];
> +
> +	for (i = 0; i < c->nr_opp; i++) {
> +		if (c->table[i].frequency < *KHz)
> +			break;
> +	}
> +	i--;
> +
> +	*KHz = c->table[i].frequency;
> +	*mW = readl_relaxed(c->reg_bases[REG_EM_POWER_TBL] +
> +			    i * LUT_ROW_SIZE) / 1000;
> +
> +	return 0;
> +}
> +
> +static int mtk_cpufreq_hw_target_index(struct cpufreq_policy *policy,
> +				       unsigned int index)
> +{
> +	struct cpufreq_mtk *c = policy->driver_data;
> +
> +	writel_relaxed(index, c->reg_bases[REG_FREQ_PERF_STATE]);
> +
> +	return 0;
> +}
> +
> +static unsigned int mtk_cpufreq_hw_get(unsigned int cpu)
> +{
> +	struct cpufreq_mtk *c;
> +	struct cpufreq_policy *policy;
> +	unsigned int index;
> +
> +	policy = cpufreq_cpu_get_raw(cpu);
> +	if (!policy)
> +		return 0;
> +
> +	c = mtk_freq_domain_map[policy->cpu];
> +
> +	index = readl_relaxed(c->reg_bases[REG_FREQ_PERF_STATE]);
> +	index = min(index, LUT_MAX_ENTRIES - 1);
> +
> +	return c->table[index].frequency;
> +}
> +
> +static unsigned int mtk_cpufreq_hw_fast_switch(struct cpufreq_policy *policy,
> +					       unsigned int target_freq)
> +{
> +	struct cpufreq_mtk *c = policy->driver_data;
> +	unsigned int index;
> +
> +	index = cpufreq_table_find_index_dl(policy, target_freq);
> +
> +	writel_relaxed(index, c->reg_bases[REG_FREQ_PERF_STATE]);
> +
> +	return policy->freq_table[index].frequency;
> +}
> +
> +static int mtk_cpu_create_freq_table(struct platform_device *pdev,
> +				     struct cpufreq_mtk *c)
> +{
> +	struct device *dev = &pdev->dev;
> +	void __iomem *base_table;
> +	u32 data, i, freq, prev_freq = 0;
> +
> +	c->table = devm_kcalloc(dev, LUT_MAX_ENTRIES + 1,
> +				sizeof(*c->table), GFP_KERNEL);
> +	if (!c->table)
> +		return -ENOMEM;
> +
> +	base_table = c->reg_bases[REG_FREQ_LUT_TABLE];
> +
> +	for (i = 0; i < LUT_MAX_ENTRIES; i++) {
> +		data = readl_relaxed(base_table + (i * LUT_ROW_SIZE));
> +		freq = FIELD_GET(LUT_FREQ, data) * 1000;
> +
> +		if (freq == prev_freq)
> +			break;
> +
> +		c->table[i].frequency = freq;
> +
> +		dev_dbg(dev, "index=%d freq=%d\n",
> +			i, c->table[i].frequency);

Won't this fit in a single line ?

> +
> +		prev_freq = freq;
> +	}
> +
> +	c->table[i].frequency = CPUFREQ_TABLE_END;
> +	c->nr_opp = i;
> +
> +	return 0;
> +}
> +
> +static int mtk_cpu_resources_init(struct platform_device *pdev,
> +				  unsigned int cpu, int index,
> +				  const u16 *offsets)
> +{
> +	struct cpufreq_mtk *c;
> +	struct device *dev = &pdev->dev;
> +	int ret, i;
> +	void __iomem *base;
> +
> +	if (mtk_freq_domain_map[cpu])

This should not happen anymore, isn't it ?

> +		return 0;
> +
> +	c = devm_kzalloc(dev, sizeof(*c), GFP_KERNEL);
> +	if (!c)
> +		return -ENOMEM;
> +
> +	base = devm_platform_ioremap_resource(pdev, index);
> +	if (IS_ERR(base))
> +		return PTR_ERR(base);
> +
> +	for (i = REG_FREQ_LUT_TABLE; i < REG_ARRAY_SIZE; i++)
> +		c->reg_bases[i] = base + offsets[i];
> +
> +	ret = of_perf_domain_get_sharing_cpumask(index, "performance-domains",

Instead of parsing parsing "performance-domains" twice, I would rather
pass a CPU number here instead of index.

> +						 "#performance-domain-cells",
> +						 &c->related_cpus);

You could have directly passed policy->cpus here instead.

> +	if (ret) {
> +		dev_info(dev, "Domain-%d failed to get related CPUs\n", index);
> +		return ret;
> +	}
> +
> +	ret = mtk_cpu_create_freq_table(pdev, c);
> +	if (ret) {
> +		dev_info(dev, "Domain-%d failed to create freq table\n", index);
> +		return ret;
> +	}
> +
> +	mtk_freq_domain_map[cpu] = c;

I will rather use policy->driver_data to store this now.

> +
> +	return 0;
> +}
> +
> +static int mtk_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
> +{
> +	struct platform_device *pdev = cpufreq_get_driver_data();
> +	struct cpufreq_mtk *c;
> +	struct device *cpu_dev;
> +	struct em_data_callback em_cb = EM_DATA_CB(mtk_cpufreq_get_cpu_power);
> +	struct pm_qos_request *qos_request;
> +	struct device_node *cpu_np;
> +	struct of_phandle_args args;
> +	const u16 *offsets;
> +	unsigned int latency;
> +	int sig, pwr_hw = CPUFREQ_HW_STATUS | SVS_HW_STATUS;
> +	int ret;

It looks much more organized when the variable definitions are in
decreasing order of their length, instead of the random order as it is
right now.

> +
> +	offsets = of_device_get_match_data(&pdev->dev);
> +	if (!offsets)
> +		return -EINVAL;
> +
> +	cpu_np = of_cpu_device_node_get(policy->cpu);
> +	if (!cpu_np) {
> +		dev_info(&pdev->dev, "Failed to get cpu %d device\n",
> +			 policy->cpu);
> +		return -ENODEV;
> +	}
> +
> +	ret = of_parse_phandle_with_args(cpu_np, "performance-domains",
> +					 "#performance-domain-cells", 0,
> +					 &args);
> +	if (ret < 0)

What about dropping cpu_np and same later in the code as well ?

> +		return ret;
> +
> +	/* Get the bases of cpufreq for domains */
> +	ret = mtk_cpu_resources_init(pdev, policy->cpu, args.args[0], offsets);
> +	if (ret) {
> +		dev_info(&pdev->dev, "CPUFreq resource init failed\n");
> +		return ret;
> +	}
> +
> +	cpu_dev = get_cpu_device(policy->cpu);
> +	if (!cpu_dev) {
> +		pr_err("failed to get cpu%d device\n", policy->cpu);
> +		return -ENODEV;
> +	}
> +
> +	c = mtk_freq_domain_map[policy->cpu];
> +	if (!c) {
> +		pr_err("No scaling support for CPU%d\n", policy->cpu);
> +		return -ENODEV;
> +	}
> +
> +	cpumask_copy(policy->cpus, &c->related_cpus);
> +
> +	policy->freq_table = c->table;
> +	policy->driver_data = c;

Oh you already do this, you can remove mtk_freq_domain_map array now.

> +
> +	latency = readl_relaxed(c->reg_bases[REG_FREQ_LATENCY]);
> +	if (!latency)
> +		latency = CPUFREQ_ETERNAL;
> +
> +	/* us convert to ns */
> +	policy->cpuinfo.transition_latency = latency * 1000;

You want to multiple CPUFREQ_ETERNAL too ?

> +
> +	policy->fast_switch_possible = true;
> +
> +	qos_request = kzalloc(sizeof(*qos_request), GFP_KERNEL);

This is a small structure, why not allocate it on stack instead ?

> +	if (!qos_request)
> +		return -ENOMEM;
> +
> +	/* Let CPUs leave idle-off state for SVS CPU initializing */
> +	cpu_latency_qos_add_request(qos_request, 0);
> +
> +	/* HW should be in enabled state to proceed now */
> +	writel_relaxed(0x1, c->reg_bases[REG_FREQ_ENABLE]);
> +
> +	if (readl_poll_timeout(c->reg_bases[REG_FREQ_HW_STATE], sig,
> +			       (sig & pwr_hw) == pwr_hw, POLL_USEC,
> +			       TIMEOUT_USEC)) {
> +		if (!(sig & CPUFREQ_HW_STATUS)) {
> +			pr_info("cpufreq hardware of CPU%d is not enabled\n",
> +				policy->cpu);
> +			return -ENODEV;
> +		}
> +
> +		pr_info("SVS of CPU%d is not enabled\n", policy->cpu);
> +	}
> +
> +	cpu_latency_qos_remove_request(qos_request);
> +
> +	em_dev_register_perf_domain(cpu_dev, c->nr_opp, &em_cb, policy->cpus, true);
> +
> +	kfree(qos_request);

Why free after registering for em ? And also move the entire qos thing
into a separate routine instead of adding it to ->init().

> +
> +	return 0;
> +}
> +
> +static int mtk_cpufreq_hw_cpu_exit(struct cpufreq_policy *policy)
> +{
> +	struct cpufreq_mtk *c;
> +
> +	c = mtk_freq_domain_map[policy->cpu];
> +
> +	/* HW should be in paused state now */
> +	writel_relaxed(0x0, c->reg_bases[REG_FREQ_ENABLE]);

Please make sure each and every resource is freed here and in probe on
failures.

> +
> +	return 0;
> +}
> +
> +static struct cpufreq_driver cpufreq_mtk_hw_driver = {
> +	.flags		= CPUFREQ_NEED_INITIAL_FREQ_CHECK |
> +			  CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
> +			  CPUFREQ_IS_COOLING_DEV,
> +	.verify		= cpufreq_generic_frequency_table_verify,
> +	.target_index	= mtk_cpufreq_hw_target_index,
> +	.get		= mtk_cpufreq_hw_get,
> +	.init		= mtk_cpufreq_hw_cpu_init,
> +	.exit		= mtk_cpufreq_hw_cpu_exit,
> +	.fast_switch	= mtk_cpufreq_hw_fast_switch,
> +	.name		= "mtk-cpufreq-hw",
> +	.attr		= cpufreq_generic_attr,
> +};
> +
> +static int mtk_cpufreq_hw_driver_probe(struct platform_device *pdev)
> +{
> +	int ret;
> +
> +	cpufreq_mtk_hw_driver.driver_data = pdev;
> +
> +	ret = cpufreq_register_driver(&cpufreq_mtk_hw_driver);
> +	if (ret) {
> +		dev_err(&pdev->dev, "CPUFreq HW driver failed to register\n");
> +		return ret;
> +	}
> +
> +	return 0;

You can do return ret here and drop the earlier return and its {}.

> +}
> +
> +static int mtk_cpufreq_hw_driver_remove(struct platform_device *pdev)
> +{
> +	return cpufreq_unregister_driver(&cpufreq_mtk_hw_driver);
> +}
> +
> +static const struct of_device_id mtk_cpufreq_hw_match[] = {
> +	{ .compatible = "mediatek,cpufreq-hw", .data = &cpufreq_mtk_offsets },
> +	{}
> +};
> +
> +static struct platform_driver mtk_cpufreq_hw_driver = {
> +	.probe = mtk_cpufreq_hw_driver_probe,
> +	.remove = mtk_cpufreq_hw_driver_remove,
> +	.driver = {
> +		.name = "mtk-cpufreq-hw",
> +		.of_match_table = mtk_cpufreq_hw_match,
> +	},
> +};
> +module_platform_driver(mtk_cpufreq_hw_driver);
> +
> +MODULE_DESCRIPTION("Mediatek cpufreq-hw driver");
> +MODULE_LICENSE("GPL v2");

You can add Module-author as well here if you want.

> diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
> index 9fd7194..4916d70 100644
> --- a/include/linux/cpufreq.h
> +++ b/include/linux/cpufreq.h
> @@ -13,6 +13,8 @@
>  #include <linux/completion.h>
>  #include <linux/kobject.h>
>  #include <linux/notifier.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
>  #include <linux/pm_qos.h>
>  #include <linux/spinlock.h>
>  #include <linux/sysfs.h>
> @@ -1036,6 +1038,43 @@ void arch_set_freq_scale(const struct cpumask *cpus,
>  }
>  #endif
>  
> +#ifdef CONFIG_CPU_FREQ

There is another CONFIG_CPU_FREQ a few lines above, please use the
same block for this routine as well.

> +static inline int of_perf_domain_get_sharing_cpumask(int index, const char *list_name,
> +						     const char *cell_name,
> +						     struct cpumask *cpumask)
> +{
> +	struct device_node *cpu_np;
> +	struct of_phandle_args args;
> +	int cpu, ret;
> +
> +	for_each_possible_cpu(cpu) {
> +		cpu_np = of_cpu_device_node_get(cpu);
> +		if (!cpu_np)
> +			continue;
> +
> +		ret = of_parse_phandle_with_args(cpu_np, list_name,
> +						 cell_name, 0,
> +						 &args);
> +
> +		of_node_put(cpu_np);
> +		if (ret < 0)
> +			continue;
> +
> +		if (index == args.args[0])
> +			cpumask_set_cpu(cpu, cpumask);
> +	}
> +
> +	return 0;
> +}
> +#else
> +static inline int of_perf_domain_get_sharing_cpumask(int index, const char *list_name,
> +						     const char *cell_name,
> +						     struct cpumask *cpumask)
> +{
> +	return 0;

	return -EOPNOTSUPP;

> +}
> +#endif

-- 
viresh

  reply	other threads:[~2021-08-03  7:13 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-29 16:08 [PATCH v13] cpufreq: mediatek-hw: Add support for Mediatek cpufreq HW driver Hector Yuan
2021-07-29 16:08 ` [PATCH v13 1/2] dt-bindings: cpufreq: add bindings for MediaTek cpufreq HW Hector Yuan
2021-08-03  5:05   ` Viresh Kumar
2021-08-03 19:17     ` Rob Herring
2021-08-03 19:22   ` Rob Herring
2021-07-29 16:08 ` [PATCH v13 2/2] cpufreq: mediatek-hw: Add support for CPUFREQ HW Hector Yuan
2021-08-03  7:13   ` Viresh Kumar [this message]
2021-08-16 12:56     ` Hector Yuan
2021-08-17  3:42       ` Viresh Kumar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210803071302.b4ttoqgqdq4dfmwe@vireshk-i7 \
    --to=viresh.kumar@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=hector.yuan@mediatek.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=rjw@rjwysocki.net \
    --cc=robh+dt@kernel.org \
    --cc=wsd_upstream@mediatek.com \
    --subject='Re: [PATCH v13 2/2] cpufreq: mediatek-hw: Add support for CPUFREQ HW' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).