linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Arnd Bergmann <arnd@arndb.de>, Rob Herring <robh@kernel.org>,
	Bjorn Helgaas <bhelgaas@google.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>, <kishon@ti.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Tom Joseph <tjoseph@cadence.com>, <linux-pci@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <linux-omap@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>, <nadeem@cadence.com>
Subject: [PATCH v2 3/6] PCI: j721e: Add PCIe support for J7200
Date: Tue, 3 Aug 2021 13:19:29 +0530	[thread overview]
Message-ID: <20210803074932.19820-4-kishon@ti.com> (raw)
In-Reply-To: <20210803074932.19820-1-kishon@ti.com>

J7200 has the same PCIe IP as in J721E with minor changes in the
wrapper. J7200 allows byte access of bridge configuration space
registers and the register field for LINK_DOWN interrupt is different.
J7200 also requires "quirk_detect_quiet_flag" to be set. Configure these
changes as part of driver data applicable only to J7200.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/pci/controller/cadence/pci-j721e.c | 40 +++++++++++++++++++---
 1 file changed, 36 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index 0c5813b230b4..8e76f2e7e782 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -27,6 +27,7 @@
 #define STATUS_REG_SYS_2	0x508
 #define STATUS_CLR_REG_SYS_2	0x708
 #define LINK_DOWN		BIT(1)
+#define J7200_LINK_DOWN		BIT(10)
 
 #define J721E_PCIE_USER_CMD_STATUS	0x4
 #define LINK_TRAINING_ENABLE		BIT(0)
@@ -57,6 +58,7 @@ struct j721e_pcie {
 	struct cdns_pcie	*cdns_pcie;
 	void __iomem		*user_cfg_base;
 	void __iomem		*intd_cfg_base;
+	u32			linkdown_irq_regfield;
 };
 
 enum j721e_pcie_mode {
@@ -67,6 +69,9 @@ enum j721e_pcie_mode {
 struct j721e_pcie_data {
 	enum j721e_pcie_mode	mode;
 	unsigned int		quirk_retrain_flag:1;
+	unsigned int		quirk_detect_quiet_flag:1;
+	u32			linkdown_irq_regfield;
+	unsigned int		byte_access_allowed:1;
 };
 
 static inline u32 j721e_pcie_user_readl(struct j721e_pcie *pcie, u32 offset)
@@ -98,12 +103,12 @@ static irqreturn_t j721e_pcie_link_irq_handler(int irq, void *priv)
 	u32 reg;
 
 	reg = j721e_pcie_intd_readl(pcie, STATUS_REG_SYS_2);
-	if (!(reg & LINK_DOWN))
+	if (!(reg & pcie->linkdown_irq_regfield))
 		return IRQ_NONE;
 
 	dev_err(dev, "LINK DOWN!\n");
 
-	j721e_pcie_intd_writel(pcie, STATUS_CLR_REG_SYS_2, LINK_DOWN);
+	j721e_pcie_intd_writel(pcie, STATUS_CLR_REG_SYS_2, pcie->linkdown_irq_regfield);
 	return IRQ_HANDLED;
 }
 
@@ -112,7 +117,7 @@ static void j721e_pcie_config_link_irq(struct j721e_pcie *pcie)
 	u32 reg;
 
 	reg = j721e_pcie_intd_readl(pcie, ENABLE_REG_SYS_2);
-	reg |= LINK_DOWN;
+	reg |= pcie->linkdown_irq_regfield;
 	j721e_pcie_intd_writel(pcie, ENABLE_REG_SYS_2, reg);
 }
 
@@ -284,10 +289,25 @@ static struct pci_ops cdns_ti_pcie_host_ops = {
 static const struct j721e_pcie_data j721e_pcie_rc_data = {
 	.mode = PCI_MODE_RC,
 	.quirk_retrain_flag = true,
+	.byte_access_allowed = false,
+	.linkdown_irq_regfield = LINK_DOWN,
 };
 
 static const struct j721e_pcie_data j721e_pcie_ep_data = {
 	.mode = PCI_MODE_EP,
+	.linkdown_irq_regfield = LINK_DOWN,
+};
+
+static const struct j721e_pcie_data j7200_pcie_rc_data = {
+	.mode = PCI_MODE_RC,
+	.quirk_detect_quiet_flag = true,
+	.linkdown_irq_regfield = J7200_LINK_DOWN,
+	.byte_access_allowed = true,
+};
+
+static const struct j721e_pcie_data j7200_pcie_ep_data = {
+	.mode = PCI_MODE_EP,
+	.quirk_detect_quiet_flag = true,
 };
 
 static const struct of_device_id of_j721e_pcie_match[] = {
@@ -299,6 +319,14 @@ static const struct of_device_id of_j721e_pcie_match[] = {
 		.compatible = "ti,j721e-pcie-ep",
 		.data = &j721e_pcie_ep_data,
 	},
+	{
+		.compatible = "ti,j7200-pcie-host",
+		.data = &j7200_pcie_rc_data,
+	},
+	{
+		.compatible = "ti,j7200-pcie-ep",
+		.data = &j7200_pcie_ep_data,
+	},
 	{},
 };
 
@@ -332,6 +360,7 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 
 	pcie->dev = dev;
 	pcie->mode = mode;
+	pcie->linkdown_irq_regfield =  data->linkdown_irq_regfield;
 
 	base = devm_platform_ioremap_resource_byname(pdev, "intd_cfg");
 	if (IS_ERR(base))
@@ -391,9 +420,11 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 			goto err_get_sync;
 		}
 
-		bridge->ops = &cdns_ti_pcie_host_ops;
+		if (!data->byte_access_allowed)
+			bridge->ops = &cdns_ti_pcie_host_ops;
 		rc = pci_host_bridge_priv(bridge);
 		rc->quirk_retrain_flag = data->quirk_retrain_flag;
+		rc->quirk_detect_quiet_flag = data->quirk_detect_quiet_flag;
 
 		cdns_pcie = &rc->pcie;
 		cdns_pcie->dev = dev;
@@ -459,6 +490,7 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 			ret = -ENOMEM;
 			goto err_get_sync;
 		}
+		ep->quirk_detect_quiet_flag = data->quirk_detect_quiet_flag;
 
 		cdns_pcie = &ep->pcie;
 		cdns_pcie->dev = dev;
-- 
2.17.1


  parent reply	other threads:[~2021-08-03  7:50 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-03  7:49 [PATCH v2 0/6] PCI: Add support for J7200 and AM64 Kishon Vijay Abraham I
2021-08-03  7:49 ` [PATCH v2 1/6] PCI: cadence: Use bitfield for *quirk_retrain_flag* instead of bool Kishon Vijay Abraham I
2021-08-03  7:49 ` [PATCH v2 2/6] PCI: cadence: Add quirk flag to set minimum delay in LTSSM Detect.Quiet state Kishon Vijay Abraham I
2021-08-03 10:08   ` Lorenzo Pieralisi
2021-08-03  7:49 ` Kishon Vijay Abraham I [this message]
2021-08-03 10:14   ` [PATCH v2 3/6] PCI: j721e: Add PCIe support for J7200 Lorenzo Pieralisi
2021-08-03  7:49 ` [PATCH v2 4/6] PCI: j721e: Add PCIe support for AM64 Kishon Vijay Abraham I
2021-08-03  7:49 ` [PATCH v2 5/6] misc: pci_endpoint_test: Do not request or allocate IRQs in probe Kishon Vijay Abraham I
2021-08-03  9:58   ` Lorenzo Pieralisi
2021-08-04 14:02     ` Kishon Vijay Abraham I
2021-08-05 11:26       ` Lorenzo Pieralisi
2021-08-09  4:36         ` Kishon Vijay Abraham I
2021-08-03  7:49 ` [PATCH v2 6/6] misc: pci_endpoint_test: Add deviceID for AM64 and J7200 Kishon Vijay Abraham I
2021-08-03 10:52 ` [PATCH v2 0/6] PCI: Add support for J7200 and AM64 Lorenzo Pieralisi
2021-08-11 12:26   ` Kishon Vijay Abraham I

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210803074932.19820-4-kishon@ti.com \
    --to=kishon@ti.com \
    --cc=arnd@arndb.de \
    --cc=bhelgaas@google.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lokeshvutla@ti.com \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=nadeem@cadence.com \
    --cc=robh@kernel.org \
    --cc=tjoseph@cadence.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).