[PATCH AUTOSEL 5.10 1/9] libata: fix ata_pio_sector for CONFIG_HIGHMEM

[PATCH AUTOSEL 5.10 1/9] libata: fix ata_pio_sector for CONFIG_HIGHMEM

[Sasha Levin]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit ecef6a9effe49e8e2635c839020b9833b71e934c ]

Data transfers are not required to be block aligned in memory, so they
span two pages.  Fix this by splitting the call to >sff_data_xfer into
two for that case.

This has been broken since the initial libata import before the damn
of git, but was uncovered by the legacy ide driver removal.

Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210709130237.3730959-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ata/libata-sff.c | 35 +++++++++++++++++++++++++++--------
 1 file changed, 27 insertions(+), 8 deletions(-)

diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index ae7189d1a568..b71ea4a680b0 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -637,6 +637,20 @@ unsigned int ata_sff_data_xfer32(struct ata_queued_cmd *qc, unsigned char *buf,
 }
 EXPORT_SYMBOL_GPL(ata_sff_data_xfer32);
 
+static void ata_pio_xfer(struct ata_queued_cmd *qc, struct page *page,
+		unsigned int offset, size_t xfer_size)
+{
+	bool do_write = (qc->tf.flags & ATA_TFLAG_WRITE);
+	unsigned char *buf;
+
+	buf = kmap_atomic(page);
+	qc->ap->ops->sff_data_xfer(qc, buf + offset, xfer_size, do_write);
+	kunmap_atomic(buf);
+
+	if (!do_write && !PageSlab(page))
+		flush_dcache_page(page);
+}
+
 /**
  *	ata_pio_sector - Transfer a sector of data.
  *	@qc: Command on going
@@ -648,11 +662,9 @@ EXPORT_SYMBOL_GPL(ata_sff_data_xfer32);
  */
 static void ata_pio_sector(struct ata_queued_cmd *qc)
 {
-	int do_write = (qc->tf.flags & ATA_TFLAG_WRITE);
 	struct ata_port *ap = qc->ap;
 	struct page *page;
 	unsigned int offset;
-	unsigned char *buf;
 
 	if (!qc->cursg) {
 		qc->curbytes = qc->nbytes;
@@ -670,13 +682,20 @@ static void ata_pio_sector(struct ata_queued_cmd *qc)
 
 	DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read");
 
-	/* do the actual data transfer */
-	buf = kmap_atomic(page);
-	ap->ops->sff_data_xfer(qc, buf + offset, qc->sect_size, do_write);
-	kunmap_atomic(buf);
+	/*
+	 * Split the transfer when it splits a page boundary.  Note that the
+	 * split still has to be dword aligned like all ATA data transfers.
+	 */
+	WARN_ON_ONCE(offset % 4);
+	if (offset + qc->sect_size > PAGE_SIZE) {
+		unsigned int split_len = PAGE_SIZE - offset;
 
-	if (!do_write && !PageSlab(page))
-		flush_dcache_page(page);
+		ata_pio_xfer(qc, page, offset, split_len);
+		ata_pio_xfer(qc, nth_page(page, 1), 0,
+			     qc->sect_size - split_len);
+	} else {
+		ata_pio_xfer(qc, page, offset, qc->sect_size);
+	}
 
 	qc->curbytes += qc->sect_size;
 	qc->cursg_ofs += qc->sect_size;
-- 
2.30.2

[PATCH AUTOSEL 5.10 2/9] reiserfs: add check for root_inode in reiserfs_fill_super

[Sasha Levin]

From: Yu Kuai <yukuai3@huawei.com>

[ Upstream commit 2acf15b94d5b8ea8392c4b6753a6ffac3135cd78 ]

Our syzcaller report a NULL pointer dereference:

BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 116e95067 P4D 116e95067 PUD 1080b5067 PMD 0
Oops: 0010 [#1] SMP KASAN
CPU: 7 PID: 592 Comm: a.out Not tainted 5.13.0-next-20210629-dirty #67
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-p4
RIP: 0010:0x0
Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
RSP: 0018:ffff888114e779b8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 1ffff110229cef39 RCX: ffffffffaa67e1aa
RDX: 0000000000000000 RSI: ffff88810a58ee00 RDI: ffff8881233180b0
RBP: ffffffffac38e9c0 R08: ffffffffaa67e17e R09: 0000000000000001
R10: ffffffffb91c5557 R11: fffffbfff7238aaa R12: ffff88810a58ee00
R13: ffff888114e77aa0 R14: 0000000000000000 R15: ffff8881233180b0
FS:  00007f946163c480(0000) GS:ffff88839f1c0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 00000001099c1000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 __lookup_slow+0x116/0x2d0
 ? page_put_link+0x120/0x120
 ? __d_lookup+0xfc/0x320
 ? d_lookup+0x49/0x90
 lookup_one_len+0x13c/0x170
 ? __lookup_slow+0x2d0/0x2d0
 ? reiserfs_schedule_old_flush+0x31/0x130
 reiserfs_lookup_privroot+0x64/0x150
 reiserfs_fill_super+0x158c/0x1b90
 ? finish_unfinished+0xb10/0xb10
 ? bprintf+0xe0/0xe0
 ? __mutex_lock_slowpath+0x30/0x30
 ? __kasan_check_write+0x20/0x30
 ? up_write+0x51/0xb0
 ? set_blocksize+0x9f/0x1f0
 mount_bdev+0x27c/0x2d0
 ? finish_unfinished+0xb10/0xb10
 ? reiserfs_kill_sb+0x120/0x120
 get_super_block+0x19/0x30
 legacy_get_tree+0x76/0xf0
 vfs_get_tree+0x49/0x160
 ? capable+0x1d/0x30
 path_mount+0xacc/0x1380
 ? putname+0x97/0xd0
 ? finish_automount+0x450/0x450
 ? kmem_cache_free+0xf8/0x5a0
 ? putname+0x97/0xd0
 do_mount+0xe2/0x110
 ? path_mount+0x1380/0x1380
 ? copy_mount_options+0x69/0x140
 __x64_sys_mount+0xf0/0x190
 do_syscall_64+0x35/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

This is because 'root_inode' is initialized with wrong mode, and
it's i_op is set to 'reiserfs_special_inode_operations'. Thus add
check for 'root_inode' to fix the problem.

Link: https://lore.kernel.org/r/20210702040743.1918552-1-yukuai3@huawei.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/reiserfs/super.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 1b9c7a387dc7..913f5af9bf24 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -2082,6 +2082,14 @@ static int reiserfs_fill_super(struct super_block *s, void *data, int silent)
 		unlock_new_inode(root_inode);
 	}
 
+	if (!S_ISDIR(root_inode->i_mode) || !inode_get_bytes(root_inode) ||
+	    !root_inode->i_size) {
+		SWARN(silent, s, "", "corrupt root inode, run fsck");
+		iput(root_inode);
+		errval = -EUCLEAN;
+		goto error;
+	}
+
 	s->s_root = d_make_root(root_inode);
 	if (!s->s_root)
 		goto error;
-- 
2.30.2

[PATCH AUTOSEL 5.10 3/9] reiserfs: check directory items on read from disk

[Sasha Levin]

From: Shreyansh Chouhan <chouhan.shreyansh630@gmail.com>

[ Upstream commit 13d257503c0930010ef9eed78b689cec417ab741 ]

While verifying the leaf item that we read from the disk, reiserfs
doesn't check the directory items, this could cause a crash when we
read a directory item from the disk that has an invalid deh_location.

This patch adds a check to the directory items read from the disk that
does a bounds check on deh_location for the directory entries. Any
directory entry header with a directory entry offset greater than the
item length is considered invalid.

Link: https://lore.kernel.org/r/20210709152929.766363-1-chouhan.shreyansh630@gmail.com
Reported-by: syzbot+c31a48e6702ccb3d64c9@syzkaller.appspotmail.com
Signed-off-by: Shreyansh Chouhan <chouhan.shreyansh630@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/reiserfs/stree.c | 31 ++++++++++++++++++++++++++-----
 1 file changed, 26 insertions(+), 5 deletions(-)

diff --git a/fs/reiserfs/stree.c b/fs/reiserfs/stree.c
index 476a7ff49482..ef42729216d1 100644
--- a/fs/reiserfs/stree.c
+++ b/fs/reiserfs/stree.c
@@ -387,6 +387,24 @@ void pathrelse(struct treepath *search_path)
 	search_path->path_length = ILLEGAL_PATH_ELEMENT_OFFSET;
 }
 
+static int has_valid_deh_location(struct buffer_head *bh, struct item_head *ih)
+{
+	struct reiserfs_de_head *deh;
+	int i;
+
+	deh = B_I_DEH(bh, ih);
+	for (i = 0; i < ih_entry_count(ih); i++) {
+		if (deh_location(&deh[i]) > ih_item_len(ih)) {
+			reiserfs_warning(NULL, "reiserfs-5094",
+					 "directory entry location seems wrong %h",
+					 &deh[i]);
+			return 0;
+		}
+	}
+
+	return 1;
+}
+
 static int is_leaf(char *buf, int blocksize, struct buffer_head *bh)
 {
 	struct block_head *blkh;
@@ -454,11 +472,14 @@ static int is_leaf(char *buf, int blocksize, struct buffer_head *bh)
 					 "(second one): %h", ih);
 			return 0;
 		}
-		if (is_direntry_le_ih(ih) && (ih_item_len(ih) < (ih_entry_count(ih) * IH_SIZE))) {
-			reiserfs_warning(NULL, "reiserfs-5093",
-					 "item entry count seems wrong %h",
-					 ih);
-			return 0;
+		if (is_direntry_le_ih(ih)) {
+			if (ih_item_len(ih) < (ih_entry_count(ih) * IH_SIZE)) {
+				reiserfs_warning(NULL, "reiserfs-5093",
+						 "item entry count seems wrong %h",
+						 ih);
+				return 0;
+			}
+			return has_valid_deh_location(bh, ih);
 		}
 		prev_location = ih_location(ih);
 	}
-- 
2.30.2

[PATCH AUTOSEL 5.10 4/9] virt_wifi: fix error on connect

[Sasha Levin]

From: Matteo Croce <mcroce@microsoft.com>

[ Upstream commit 17109e9783799be2a063b2bd861a508194b0a487 ]

When connecting without first doing a scan, the BSS list is empty
and __cfg80211_connect_result() generates this warning:

$ iw dev wlan0 connect -w VirtWifi
[   15.371989] ------------[ cut here ]------------
[   15.372179] WARNING: CPU: 0 PID: 92 at net/wireless/sme.c:756 __cfg80211_connect_result+0x402/0x440
[   15.372383] CPU: 0 PID: 92 Comm: kworker/u2:2 Not tainted 5.13.0-kvm #444
[   15.372512] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-3.fc34 04/01/2014
[   15.372597] Workqueue: cfg80211 cfg80211_event_work
[   15.372756] RIP: 0010:__cfg80211_connect_result+0x402/0x440
[   15.372818] Code: 48 2b 04 25 28 00 00 00 75 59 48 8b 3b 48 8b 76 10 48 8d 65 e0 5b 41 5c 41 5d 41 5e 5d 49 8d 65 f0 41 5d e9 d0 d4 fd ff 0f 0b <0f> 0b e9 f6 fd ff ff e8 f2 4a b4 ff e9 ec fd ff ff 0f 0b e9 19 fd
[   15.372966] RSP: 0018:ffffc900005cbdc0 EFLAGS: 00010246
[   15.373022] RAX: 0000000000000000 RBX: ffff8880028e2400 RCX: ffff8880028e2472
[   15.373088] RDX: 0000000000000002 RSI: 00000000fffffe01 RDI: ffffffff815335ba
[   15.373149] RBP: ffffc900005cbe00 R08: 0000000000000008 R09: ffff888002bdf8b8
[   15.373209] R10: ffff88803ec208f0 R11: ffffffffffffe9ae R12: ffff88801d687d98
[   15.373280] R13: ffff88801b5fe000 R14: ffffc900005cbdc0 R15: dead000000000100
[   15.373330] FS:  0000000000000000(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000
[   15.373382] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   15.373425] CR2: 000056421c468958 CR3: 000000001b458001 CR4: 0000000000170eb0
[   15.373478] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   15.373529] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   15.373580] Call Trace:
[   15.373611]  ? cfg80211_process_wdev_events+0x10e/0x170
[   15.373743]  cfg80211_process_wdev_events+0x10e/0x170
[   15.373783]  cfg80211_process_rdev_events+0x21/0x40
[   15.373846]  cfg80211_event_work+0x20/0x30
[   15.373892]  process_one_work+0x1e9/0x340
[   15.373956]  worker_thread+0x4b/0x3f0
[   15.374017]  ? process_one_work+0x340/0x340
[   15.374053]  kthread+0x11f/0x140
[   15.374089]  ? set_kthread_struct+0x30/0x30
[   15.374153]  ret_from_fork+0x1f/0x30
[   15.374187] ---[ end trace 321ef0cb7e9c0be1 ]---
wlan0 (phy #0): connected to 00:00:00:00:00:00

Add the fake bss just before the connect so that cfg80211_get_bss()
finds the virtual network.
As some code was duplicated, move it in a common function.

Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Link: https://lore.kernel.org/r/20210706154423.11065-1-mcroce@linux.microsoft.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/virt_wifi.c | 52 ++++++++++++++++++++------------
 1 file changed, 32 insertions(+), 20 deletions(-)

diff --git a/drivers/net/wireless/virt_wifi.c b/drivers/net/wireless/virt_wifi.c
index 1df959532c7d..514f2c1124b6 100644
--- a/drivers/net/wireless/virt_wifi.c
+++ b/drivers/net/wireless/virt_wifi.c
@@ -136,6 +136,29 @@ static struct ieee80211_supported_band band_5ghz = {
 /* Assigned at module init. Guaranteed locally-administered and unicast. */
 static u8 fake_router_bssid[ETH_ALEN] __ro_after_init = {};
 
+static void virt_wifi_inform_bss(struct wiphy *wiphy)
+{
+	u64 tsf = div_u64(ktime_get_boottime_ns(), 1000);
+	struct cfg80211_bss *informed_bss;
+	static const struct {
+		u8 tag;
+		u8 len;
+		u8 ssid[8];
+	} __packed ssid = {
+		.tag = WLAN_EID_SSID,
+		.len = 8,
+		.ssid = "VirtWifi",
+	};
+
+	informed_bss = cfg80211_inform_bss(wiphy, &channel_5ghz,
+					   CFG80211_BSS_FTYPE_PRESP,
+					   fake_router_bssid, tsf,
+					   WLAN_CAPABILITY_ESS, 0,
+					   (void *)&ssid, sizeof(ssid),
+					   DBM_TO_MBM(-50), GFP_KERNEL);
+	cfg80211_put_bss(wiphy, informed_bss);
+}
+
 /* Called with the rtnl lock held. */
 static int virt_wifi_scan(struct wiphy *wiphy,
 			  struct cfg80211_scan_request *request)
@@ -156,28 +179,13 @@ static int virt_wifi_scan(struct wiphy *wiphy,
 /* Acquires and releases the rdev BSS lock. */
 static void virt_wifi_scan_result(struct work_struct *work)
 {
-	struct {
-		u8 tag;
-		u8 len;
-		u8 ssid[8];
-	} __packed ssid = {
-		.tag = WLAN_EID_SSID, .len = 8, .ssid = "VirtWifi",
-	};
-	struct cfg80211_bss *informed_bss;
 	struct virt_wifi_wiphy_priv *priv =
 		container_of(work, struct virt_wifi_wiphy_priv,
 			     scan_result.work);
 	struct wiphy *wiphy = priv_to_wiphy(priv);
 	struct cfg80211_scan_info scan_info = { .aborted = false };
-	u64 tsf = div_u64(ktime_get_boottime_ns(), 1000);
 
-	informed_bss = cfg80211_inform_bss(wiphy, &channel_5ghz,
-					   CFG80211_BSS_FTYPE_PRESP,
-					   fake_router_bssid, tsf,
-					   WLAN_CAPABILITY_ESS, 0,
-					   (void *)&ssid, sizeof(ssid),
-					   DBM_TO_MBM(-50), GFP_KERNEL);
-	cfg80211_put_bss(wiphy, informed_bss);
+	virt_wifi_inform_bss(wiphy);
 
 	/* Schedules work which acquires and releases the rtnl lock. */
 	cfg80211_scan_done(priv->scan_request, &scan_info);
@@ -225,10 +233,12 @@ static int virt_wifi_connect(struct wiphy *wiphy, struct net_device *netdev,
 	if (!could_schedule)
 		return -EBUSY;
 
-	if (sme->bssid)
+	if (sme->bssid) {
 		ether_addr_copy(priv->connect_requested_bss, sme->bssid);
-	else
+	} else {
+		virt_wifi_inform_bss(wiphy);
 		eth_zero_addr(priv->connect_requested_bss);
+	}
 
 	wiphy_debug(wiphy, "connect\n");
 
@@ -241,11 +251,13 @@ static void virt_wifi_connect_complete(struct work_struct *work)
 	struct virt_wifi_netdev_priv *priv =
 		container_of(work, struct virt_wifi_netdev_priv, connect.work);
 	u8 *requested_bss = priv->connect_requested_bss;
-	bool has_addr = !is_zero_ether_addr(requested_bss);
 	bool right_addr = ether_addr_equal(requested_bss, fake_router_bssid);
 	u16 status = WLAN_STATUS_SUCCESS;
 
-	if (!priv->is_up || (has_addr && !right_addr))
+	if (is_zero_ether_addr(requested_bss))
+		requested_bss = NULL;
+
+	if (!priv->is_up || (requested_bss && !right_addr))
 		status = WLAN_STATUS_UNSPECIFIED_FAILURE;
 	else
 		priv->is_connected = true;
-- 
2.30.2

[PATCH AUTOSEL 5.10 5/9] net: qede: Fix end of loop tests for list_for_each_entry

[Sasha Levin]

From: Harshvardhan Jha <harshvardhan.jha@oracle.com>

[ Upstream commit 795e3d2ea68e489ee7039ac29e98bfea0e34a96c ]

The list_for_each_entry() iterator, "vlan" in this code, can never be
NULL so the warning will never be printed.

Signed-off-by: Harshvardhan Jha <harshvardhan.jha@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qede/qede_filter.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qede/qede_filter.c b/drivers/net/ethernet/qlogic/qede/qede_filter.c
index c59b72c90293..a2e4dfb5cb44 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_filter.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_filter.c
@@ -831,7 +831,7 @@ int qede_configure_vlan_filters(struct qede_dev *edev)
 int qede_vlan_rx_kill_vid(struct net_device *dev, __be16 proto, u16 vid)
 {
 	struct qede_dev *edev = netdev_priv(dev);
-	struct qede_vlan *vlan = NULL;
+	struct qede_vlan *vlan;
 	int rc = 0;
 
 	DP_VERBOSE(edev, NETIF_MSG_IFDOWN, "Removing vlan 0x%04x\n", vid);
@@ -842,7 +842,7 @@ int qede_vlan_rx_kill_vid(struct net_device *dev, __be16 proto, u16 vid)
 		if (vlan->vid == vid)
 			break;
 
-	if (!vlan || (vlan->vid != vid)) {
+	if (list_entry_is_head(vlan, &edev->vlan_list, list)) {
 		DP_VERBOSE(edev, (NETIF_MSG_IFUP | NETIF_MSG_IFDOWN),
 			   "Vlan isn't configured\n");
 		goto out;
-- 
2.30.2

[PATCH AUTOSEL 5.10 6/9] alpha: Send stop IPI to send to online CPUs

[Sasha Levin]

From: Prarit Bhargava <prarit@redhat.com>

[ Upstream commit caace6ca4e06f09413fb8f8a63319594cfb7d47d ]

This issue was noticed while debugging a shutdown issue where some
secondary CPUs are not being shutdown correctly.  A fix for that [1] requires
that secondary cpus be offlined using the cpu_online_mask so that the
stop operation is a no-op if CPU HOTPLUG is disabled.  I, like the author in
[1] looked at the architectures and found that alpha is one of two
architectures that executes smp_send_stop() on all possible CPUs.

On alpha, smp_send_stop() sends an IPI to all possible CPUs but only needs
to send them to online CPUs.

Send the stop IPI to only the online CPUs.

[1] https://lkml.org/lkml/2020/1/10/250

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/alpha/kernel/smp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c
index 4b2575f936d4..cb64e4797d2a 100644
--- a/arch/alpha/kernel/smp.c
+++ b/arch/alpha/kernel/smp.c
@@ -582,7 +582,7 @@ void
 smp_send_stop(void)
 {
 	cpumask_t to_whom;
-	cpumask_copy(&to_whom, cpu_possible_mask);
+	cpumask_copy(&to_whom, cpu_online_mask);
 	cpumask_clear_cpu(smp_processor_id(), &to_whom);
 #ifdef DEBUG_IPI_MSG
 	if (hard_smp_processor_id() != boot_cpu_id)
-- 
2.30.2

[PATCH AUTOSEL 5.10 7/9] net/qla3xxx: fix schedule while atomic in ql_wait_for_drvr_lock and ql_adapter_reset

[Sasha Levin]

From: Letu Ren <fantasquex@gmail.com>

[ Upstream commit 92766c4628ea349c8ddab0cd7bd0488f36e5c4ce ]

When calling the 'ql_wait_for_drvr_lock' and 'ql_adapter_reset', the driver
has already acquired the spin lock, so the driver should not call 'ssleep'
in atomic context.

This bug can be fixed by using 'mdelay' instead of 'ssleep'.

Reported-by: Letu Ren <fantasquex@gmail.com>
Signed-off-by: Letu Ren <fantasquex@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qla3xxx.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qla3xxx.c b/drivers/net/ethernet/qlogic/qla3xxx.c
index a83b3d69a656..c7923e22a4c4 100644
--- a/drivers/net/ethernet/qlogic/qla3xxx.c
+++ b/drivers/net/ethernet/qlogic/qla3xxx.c
@@ -154,7 +154,7 @@ static int ql_wait_for_drvr_lock(struct ql3_adapter *qdev)
 				      "driver lock acquired\n");
 			return 1;
 		}
-		ssleep(1);
+		mdelay(1000);
 	} while (++i < 10);
 
 	netdev_err(qdev->ndev, "Timed out waiting for driver lock...\n");
@@ -3290,7 +3290,7 @@ static int ql_adapter_reset(struct ql3_adapter *qdev)
 		if ((value & ISP_CONTROL_SR) == 0)
 			break;
 
-		ssleep(1);
+		mdelay(1000);
 	} while ((--max_wait_time));
 
 	/*
@@ -3326,7 +3326,7 @@ static int ql_adapter_reset(struct ql3_adapter *qdev)
 						   ispControlStatus);
 			if ((value & ISP_CONTROL_FSR) == 0)
 				break;
-			ssleep(1);
+			mdelay(1000);
 		} while ((--max_wait_time));
 	}
 	if (max_wait_time == 0)
-- 
2.30.2

[PATCH AUTOSEL 5.10 8/9] smb3: rc uninitialized in one fallocate path

[Sasha Levin]

From: Steve French <stfrench@microsoft.com>

[ Upstream commit 5ad4df56cd2158965f73416d41fce37906724822 ]

Clang detected a problem with rc possibly being unitialized
(when length is zero) in a recently added fallocate code path.

Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/smb2ops.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c
index 81e087723777..fdb1d660bd13 100644
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -3466,7 +3466,8 @@ static int smb3_simple_fallocate_write_range(unsigned int xid,
 					     char *buf)
 {
 	struct cifs_io_parms io_parms = {0};
-	int rc, nbytes;
+	int nbytes;
+	int rc = 0;
 	struct kvec iov[2];
 
 	io_parms.netfid = cfile->fid.netfid;
-- 
2.30.2

[PATCH AUTOSEL 5.10 9/9] drm/amdgpu/display: only enable aux backlight control for OLED panels

[Sasha Levin]

From: Alex Deucher <alexander.deucher@amd.com>

[ Upstream commit f2ad3accefc63e72e9932e141c21875cc04beec8 ]

We've gotten a number of reports about backlight control not
working on panels which indicate that they use aux backlight
control.  A recent patch:

commit 2d73eabe2984a435737498ab39bb1500a9ffe9a9
Author: Camille Cho <Camille.Cho@amd.com>
Date:   Thu Jul 8 18:28:37 2021 +0800

    drm/amd/display: Only set default brightness for OLED

    [Why]
    We used to unconditionally set backlight path as AUX for panels capable
    of backlight adjustment via DPCD in set default brightness.

    [How]
    This should be limited to OLED panel only since we control backlight via
    PWM path for SDR mode in LCD HDR panel.

    Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
    Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
    Signed-off-by: Camille Cho <Camille.Cho@amd.com>
    Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Changes some other code to only use aux for backlight control on
OLED panels.  The commit message seems to indicate that PWM should
be used for SDR mode on HDR panels.  Do something similar for
backlight control in general.  This may need to be revisited if and
when HDR started to get used.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1438
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=213715
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 6eb308670f48..8d537123e4ad 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -2162,9 +2162,9 @@ static void update_connector_ext_caps(struct amdgpu_dm_connector *aconnector)
 	max_cll = conn_base->hdr_sink_metadata.hdmi_type1.max_cll;
 	min_cll = conn_base->hdr_sink_metadata.hdmi_type1.min_cll;
 
-	if (caps->ext_caps->bits.oled == 1 ||
+	if (caps->ext_caps->bits.oled == 1 /*||
 	    caps->ext_caps->bits.sdr_aux_backlight_control == 1 ||
-	    caps->ext_caps->bits.hdr_aux_backlight_control == 1)
+	    caps->ext_caps->bits.hdr_aux_backlight_control == 1*/)
 		caps->aux_support = true;
 
 	if (amdgpu_backlight == 0)
-- 
2.30.2