[PATCH AUTOSEL 5.4 1/6] libata: fix ata_pio_sector for CONFIG_HIGHMEM

[PATCH AUTOSEL 5.4 1/6] libata: fix ata_pio_sector for CONFIG_HIGHMEM

[Sasha Levin]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit ecef6a9effe49e8e2635c839020b9833b71e934c ]

Data transfers are not required to be block aligned in memory, so they
span two pages.  Fix this by splitting the call to >sff_data_xfer into
two for that case.

This has been broken since the initial libata import before the damn
of git, but was uncovered by the legacy ide driver removal.

Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210709130237.3730959-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ata/libata-sff.c | 35 +++++++++++++++++++++++++++--------
 1 file changed, 27 insertions(+), 8 deletions(-)

diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 038db94216a9..454f9d7d42fe 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -641,6 +641,20 @@ unsigned int ata_sff_data_xfer32(struct ata_queued_cmd *qc, unsigned char *buf,
 }
 EXPORT_SYMBOL_GPL(ata_sff_data_xfer32);
 
+static void ata_pio_xfer(struct ata_queued_cmd *qc, struct page *page,
+		unsigned int offset, size_t xfer_size)
+{
+	bool do_write = (qc->tf.flags & ATA_TFLAG_WRITE);
+	unsigned char *buf;
+
+	buf = kmap_atomic(page);
+	qc->ap->ops->sff_data_xfer(qc, buf + offset, xfer_size, do_write);
+	kunmap_atomic(buf);
+
+	if (!do_write && !PageSlab(page))
+		flush_dcache_page(page);
+}
+
 /**
  *	ata_pio_sector - Transfer a sector of data.
  *	@qc: Command on going
@@ -652,11 +666,9 @@ EXPORT_SYMBOL_GPL(ata_sff_data_xfer32);
  */
 static void ata_pio_sector(struct ata_queued_cmd *qc)
 {
-	int do_write = (qc->tf.flags & ATA_TFLAG_WRITE);
 	struct ata_port *ap = qc->ap;
 	struct page *page;
 	unsigned int offset;
-	unsigned char *buf;
 
 	if (!qc->cursg) {
 		qc->curbytes = qc->nbytes;
@@ -674,13 +686,20 @@ static void ata_pio_sector(struct ata_queued_cmd *qc)
 
 	DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read");
 
-	/* do the actual data transfer */
-	buf = kmap_atomic(page);
-	ap->ops->sff_data_xfer(qc, buf + offset, qc->sect_size, do_write);
-	kunmap_atomic(buf);
+	/*
+	 * Split the transfer when it splits a page boundary.  Note that the
+	 * split still has to be dword aligned like all ATA data transfers.
+	 */
+	WARN_ON_ONCE(offset % 4);
+	if (offset + qc->sect_size > PAGE_SIZE) {
+		unsigned int split_len = PAGE_SIZE - offset;
 
-	if (!do_write && !PageSlab(page))
-		flush_dcache_page(page);
+		ata_pio_xfer(qc, page, offset, split_len);
+		ata_pio_xfer(qc, nth_page(page, 1), 0,
+			     qc->sect_size - split_len);
+	} else {
+		ata_pio_xfer(qc, page, offset, qc->sect_size);
+	}
 
 	qc->curbytes += qc->sect_size;
 	qc->cursg_ofs += qc->sect_size;
-- 
2.30.2

[PATCH AUTOSEL 5.4 2/6] reiserfs: add check for root_inode in reiserfs_fill_super

[Sasha Levin]

From: Yu Kuai <yukuai3@huawei.com>

[ Upstream commit 2acf15b94d5b8ea8392c4b6753a6ffac3135cd78 ]

Our syzcaller report a NULL pointer dereference:

BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 116e95067 P4D 116e95067 PUD 1080b5067 PMD 0
Oops: 0010 [#1] SMP KASAN
CPU: 7 PID: 592 Comm: a.out Not tainted 5.13.0-next-20210629-dirty #67
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-p4
RIP: 0010:0x0
Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
RSP: 0018:ffff888114e779b8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 1ffff110229cef39 RCX: ffffffffaa67e1aa
RDX: 0000000000000000 RSI: ffff88810a58ee00 RDI: ffff8881233180b0
RBP: ffffffffac38e9c0 R08: ffffffffaa67e17e R09: 0000000000000001
R10: ffffffffb91c5557 R11: fffffbfff7238aaa R12: ffff88810a58ee00
R13: ffff888114e77aa0 R14: 0000000000000000 R15: ffff8881233180b0
FS:  00007f946163c480(0000) GS:ffff88839f1c0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 00000001099c1000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 __lookup_slow+0x116/0x2d0
 ? page_put_link+0x120/0x120
 ? __d_lookup+0xfc/0x320
 ? d_lookup+0x49/0x90
 lookup_one_len+0x13c/0x170
 ? __lookup_slow+0x2d0/0x2d0
 ? reiserfs_schedule_old_flush+0x31/0x130
 reiserfs_lookup_privroot+0x64/0x150
 reiserfs_fill_super+0x158c/0x1b90
 ? finish_unfinished+0xb10/0xb10
 ? bprintf+0xe0/0xe0
 ? __mutex_lock_slowpath+0x30/0x30
 ? __kasan_check_write+0x20/0x30
 ? up_write+0x51/0xb0
 ? set_blocksize+0x9f/0x1f0
 mount_bdev+0x27c/0x2d0
 ? finish_unfinished+0xb10/0xb10
 ? reiserfs_kill_sb+0x120/0x120
 get_super_block+0x19/0x30
 legacy_get_tree+0x76/0xf0
 vfs_get_tree+0x49/0x160
 ? capable+0x1d/0x30
 path_mount+0xacc/0x1380
 ? putname+0x97/0xd0
 ? finish_automount+0x450/0x450
 ? kmem_cache_free+0xf8/0x5a0
 ? putname+0x97/0xd0
 do_mount+0xe2/0x110
 ? path_mount+0x1380/0x1380
 ? copy_mount_options+0x69/0x140
 __x64_sys_mount+0xf0/0x190
 do_syscall_64+0x35/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

This is because 'root_inode' is initialized with wrong mode, and
it's i_op is set to 'reiserfs_special_inode_operations'. Thus add
check for 'root_inode' to fix the problem.

Link: https://lore.kernel.org/r/20210702040743.1918552-1-yukuai3@huawei.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/reiserfs/super.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 1b9c7a387dc7..913f5af9bf24 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -2082,6 +2082,14 @@ static int reiserfs_fill_super(struct super_block *s, void *data, int silent)
 		unlock_new_inode(root_inode);
 	}
 
+	if (!S_ISDIR(root_inode->i_mode) || !inode_get_bytes(root_inode) ||
+	    !root_inode->i_size) {
+		SWARN(silent, s, "", "corrupt root inode, run fsck");
+		iput(root_inode);
+		errval = -EUCLEAN;
+		goto error;
+	}
+
 	s->s_root = d_make_root(root_inode);
 	if (!s->s_root)
 		goto error;
-- 
2.30.2

[PATCH AUTOSEL 5.4 3/6] reiserfs: check directory items on read from disk

[Sasha Levin]

From: Shreyansh Chouhan <chouhan.shreyansh630@gmail.com>

[ Upstream commit 13d257503c0930010ef9eed78b689cec417ab741 ]

While verifying the leaf item that we read from the disk, reiserfs
doesn't check the directory items, this could cause a crash when we
read a directory item from the disk that has an invalid deh_location.

This patch adds a check to the directory items read from the disk that
does a bounds check on deh_location for the directory entries. Any
directory entry header with a directory entry offset greater than the
item length is considered invalid.

Link: https://lore.kernel.org/r/20210709152929.766363-1-chouhan.shreyansh630@gmail.com
Reported-by: syzbot+c31a48e6702ccb3d64c9@syzkaller.appspotmail.com
Signed-off-by: Shreyansh Chouhan <chouhan.shreyansh630@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/reiserfs/stree.c | 31 ++++++++++++++++++++++++++-----
 1 file changed, 26 insertions(+), 5 deletions(-)

diff --git a/fs/reiserfs/stree.c b/fs/reiserfs/stree.c
index 9e64e23014e8..07d787145cc3 100644
--- a/fs/reiserfs/stree.c
+++ b/fs/reiserfs/stree.c
@@ -387,6 +387,24 @@ void pathrelse(struct treepath *search_path)
 	search_path->path_length = ILLEGAL_PATH_ELEMENT_OFFSET;
 }
 
+static int has_valid_deh_location(struct buffer_head *bh, struct item_head *ih)
+{
+	struct reiserfs_de_head *deh;
+	int i;
+
+	deh = B_I_DEH(bh, ih);
+	for (i = 0; i < ih_entry_count(ih); i++) {
+		if (deh_location(&deh[i]) > ih_item_len(ih)) {
+			reiserfs_warning(NULL, "reiserfs-5094",
+					 "directory entry location seems wrong %h",
+					 &deh[i]);
+			return 0;
+		}
+	}
+
+	return 1;
+}
+
 static int is_leaf(char *buf, int blocksize, struct buffer_head *bh)
 {
 	struct block_head *blkh;
@@ -454,11 +472,14 @@ static int is_leaf(char *buf, int blocksize, struct buffer_head *bh)
 					 "(second one): %h", ih);
 			return 0;
 		}
-		if (is_direntry_le_ih(ih) && (ih_item_len(ih) < (ih_entry_count(ih) * IH_SIZE))) {
-			reiserfs_warning(NULL, "reiserfs-5093",
-					 "item entry count seems wrong %h",
-					 ih);
-			return 0;
+		if (is_direntry_le_ih(ih)) {
+			if (ih_item_len(ih) < (ih_entry_count(ih) * IH_SIZE)) {
+				reiserfs_warning(NULL, "reiserfs-5093",
+						 "item entry count seems wrong %h",
+						 ih);
+				return 0;
+			}
+			return has_valid_deh_location(bh, ih);
 		}
 		prev_location = ih_location(ih);
 	}
-- 
2.30.2

[PATCH AUTOSEL 5.4 4/6] virt_wifi: fix error on connect

[Sasha Levin]

From: Matteo Croce <mcroce@microsoft.com>

[ Upstream commit 17109e9783799be2a063b2bd861a508194b0a487 ]

When connecting without first doing a scan, the BSS list is empty
and __cfg80211_connect_result() generates this warning:

$ iw dev wlan0 connect -w VirtWifi
[   15.371989] ------------[ cut here ]------------
[   15.372179] WARNING: CPU: 0 PID: 92 at net/wireless/sme.c:756 __cfg80211_connect_result+0x402/0x440
[   15.372383] CPU: 0 PID: 92 Comm: kworker/u2:2 Not tainted 5.13.0-kvm #444
[   15.372512] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-3.fc34 04/01/2014
[   15.372597] Workqueue: cfg80211 cfg80211_event_work
[   15.372756] RIP: 0010:__cfg80211_connect_result+0x402/0x440
[   15.372818] Code: 48 2b 04 25 28 00 00 00 75 59 48 8b 3b 48 8b 76 10 48 8d 65 e0 5b 41 5c 41 5d 41 5e 5d 49 8d 65 f0 41 5d e9 d0 d4 fd ff 0f 0b <0f> 0b e9 f6 fd ff ff e8 f2 4a b4 ff e9 ec fd ff ff 0f 0b e9 19 fd
[   15.372966] RSP: 0018:ffffc900005cbdc0 EFLAGS: 00010246
[   15.373022] RAX: 0000000000000000 RBX: ffff8880028e2400 RCX: ffff8880028e2472
[   15.373088] RDX: 0000000000000002 RSI: 00000000fffffe01 RDI: ffffffff815335ba
[   15.373149] RBP: ffffc900005cbe00 R08: 0000000000000008 R09: ffff888002bdf8b8
[   15.373209] R10: ffff88803ec208f0 R11: ffffffffffffe9ae R12: ffff88801d687d98
[   15.373280] R13: ffff88801b5fe000 R14: ffffc900005cbdc0 R15: dead000000000100
[   15.373330] FS:  0000000000000000(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000
[   15.373382] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   15.373425] CR2: 000056421c468958 CR3: 000000001b458001 CR4: 0000000000170eb0
[   15.373478] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   15.373529] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   15.373580] Call Trace:
[   15.373611]  ? cfg80211_process_wdev_events+0x10e/0x170
[   15.373743]  cfg80211_process_wdev_events+0x10e/0x170
[   15.373783]  cfg80211_process_rdev_events+0x21/0x40
[   15.373846]  cfg80211_event_work+0x20/0x30
[   15.373892]  process_one_work+0x1e9/0x340
[   15.373956]  worker_thread+0x4b/0x3f0
[   15.374017]  ? process_one_work+0x340/0x340
[   15.374053]  kthread+0x11f/0x140
[   15.374089]  ? set_kthread_struct+0x30/0x30
[   15.374153]  ret_from_fork+0x1f/0x30
[   15.374187] ---[ end trace 321ef0cb7e9c0be1 ]---
wlan0 (phy #0): connected to 00:00:00:00:00:00

Add the fake bss just before the connect so that cfg80211_get_bss()
finds the virtual network.
As some code was duplicated, move it in a common function.

Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Link: https://lore.kernel.org/r/20210706154423.11065-1-mcroce@linux.microsoft.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/virt_wifi.c | 52 ++++++++++++++++++++------------
 1 file changed, 32 insertions(+), 20 deletions(-)

diff --git a/drivers/net/wireless/virt_wifi.c b/drivers/net/wireless/virt_wifi.c
index 9d04ca53229b..4e906910f110 100644
--- a/drivers/net/wireless/virt_wifi.c
+++ b/drivers/net/wireless/virt_wifi.c
@@ -136,6 +136,29 @@ static struct ieee80211_supported_band band_5ghz = {
 /* Assigned at module init. Guaranteed locally-administered and unicast. */
 static u8 fake_router_bssid[ETH_ALEN] __ro_after_init = {};
 
+static void virt_wifi_inform_bss(struct wiphy *wiphy)
+{
+	u64 tsf = div_u64(ktime_get_boottime_ns(), 1000);
+	struct cfg80211_bss *informed_bss;
+	static const struct {
+		u8 tag;
+		u8 len;
+		u8 ssid[8];
+	} __packed ssid = {
+		.tag = WLAN_EID_SSID,
+		.len = 8,
+		.ssid = "VirtWifi",
+	};
+
+	informed_bss = cfg80211_inform_bss(wiphy, &channel_5ghz,
+					   CFG80211_BSS_FTYPE_PRESP,
+					   fake_router_bssid, tsf,
+					   WLAN_CAPABILITY_ESS, 0,
+					   (void *)&ssid, sizeof(ssid),
+					   DBM_TO_MBM(-50), GFP_KERNEL);
+	cfg80211_put_bss(wiphy, informed_bss);
+}
+
 /* Called with the rtnl lock held. */
 static int virt_wifi_scan(struct wiphy *wiphy,
 			  struct cfg80211_scan_request *request)
@@ -156,28 +179,13 @@ static int virt_wifi_scan(struct wiphy *wiphy,
 /* Acquires and releases the rdev BSS lock. */
 static void virt_wifi_scan_result(struct work_struct *work)
 {
-	struct {
-		u8 tag;
-		u8 len;
-		u8 ssid[8];
-	} __packed ssid = {
-		.tag = WLAN_EID_SSID, .len = 8, .ssid = "VirtWifi",
-	};
-	struct cfg80211_bss *informed_bss;
 	struct virt_wifi_wiphy_priv *priv =
 		container_of(work, struct virt_wifi_wiphy_priv,
 			     scan_result.work);
 	struct wiphy *wiphy = priv_to_wiphy(priv);
 	struct cfg80211_scan_info scan_info = { .aborted = false };
-	u64 tsf = div_u64(ktime_get_boottime_ns(), 1000);
 
-	informed_bss = cfg80211_inform_bss(wiphy, &channel_5ghz,
-					   CFG80211_BSS_FTYPE_PRESP,
-					   fake_router_bssid, tsf,
-					   WLAN_CAPABILITY_ESS, 0,
-					   (void *)&ssid, sizeof(ssid),
-					   DBM_TO_MBM(-50), GFP_KERNEL);
-	cfg80211_put_bss(wiphy, informed_bss);
+	virt_wifi_inform_bss(wiphy);
 
 	/* Schedules work which acquires and releases the rtnl lock. */
 	cfg80211_scan_done(priv->scan_request, &scan_info);
@@ -225,10 +233,12 @@ static int virt_wifi_connect(struct wiphy *wiphy, struct net_device *netdev,
 	if (!could_schedule)
 		return -EBUSY;
 
-	if (sme->bssid)
+	if (sme->bssid) {
 		ether_addr_copy(priv->connect_requested_bss, sme->bssid);
-	else
+	} else {
+		virt_wifi_inform_bss(wiphy);
 		eth_zero_addr(priv->connect_requested_bss);
+	}
 
 	wiphy_debug(wiphy, "connect\n");
 
@@ -241,11 +251,13 @@ static void virt_wifi_connect_complete(struct work_struct *work)
 	struct virt_wifi_netdev_priv *priv =
 		container_of(work, struct virt_wifi_netdev_priv, connect.work);
 	u8 *requested_bss = priv->connect_requested_bss;
-	bool has_addr = !is_zero_ether_addr(requested_bss);
 	bool right_addr = ether_addr_equal(requested_bss, fake_router_bssid);
 	u16 status = WLAN_STATUS_SUCCESS;
 
-	if (!priv->is_up || (has_addr && !right_addr))
+	if (is_zero_ether_addr(requested_bss))
+		requested_bss = NULL;
+
+	if (!priv->is_up || (requested_bss && !right_addr))
 		status = WLAN_STATUS_UNSPECIFIED_FAILURE;
 	else
 		priv->is_connected = true;
-- 
2.30.2

[PATCH AUTOSEL 5.4 5/6] alpha: Send stop IPI to send to online CPUs

[Sasha Levin]

From: Prarit Bhargava <prarit@redhat.com>

[ Upstream commit caace6ca4e06f09413fb8f8a63319594cfb7d47d ]

This issue was noticed while debugging a shutdown issue where some
secondary CPUs are not being shutdown correctly.  A fix for that [1] requires
that secondary cpus be offlined using the cpu_online_mask so that the
stop operation is a no-op if CPU HOTPLUG is disabled.  I, like the author in
[1] looked at the architectures and found that alpha is one of two
architectures that executes smp_send_stop() on all possible CPUs.

On alpha, smp_send_stop() sends an IPI to all possible CPUs but only needs
to send them to online CPUs.

Send the stop IPI to only the online CPUs.

[1] https://lkml.org/lkml/2020/1/10/250

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/alpha/kernel/smp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c
index 5f90df30be20..06fd42417aa9 100644
--- a/arch/alpha/kernel/smp.c
+++ b/arch/alpha/kernel/smp.c
@@ -585,7 +585,7 @@ void
 smp_send_stop(void)
 {
 	cpumask_t to_whom;
-	cpumask_copy(&to_whom, cpu_possible_mask);
+	cpumask_copy(&to_whom, cpu_online_mask);
 	cpumask_clear_cpu(smp_processor_id(), &to_whom);
 #ifdef DEBUG_IPI_MSG
 	if (hard_smp_processor_id() != boot_cpu_id)
-- 
2.30.2

[PATCH AUTOSEL 5.4 6/6] net/qla3xxx: fix schedule while atomic in ql_wait_for_drvr_lock and ql_adapter_reset

[Sasha Levin]

From: Letu Ren <fantasquex@gmail.com>

[ Upstream commit 92766c4628ea349c8ddab0cd7bd0488f36e5c4ce ]

When calling the 'ql_wait_for_drvr_lock' and 'ql_adapter_reset', the driver
has already acquired the spin lock, so the driver should not call 'ssleep'
in atomic context.

This bug can be fixed by using 'mdelay' instead of 'ssleep'.

Reported-by: Letu Ren <fantasquex@gmail.com>
Signed-off-by: Letu Ren <fantasquex@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qla3xxx.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qla3xxx.c b/drivers/net/ethernet/qlogic/qla3xxx.c
index 5dc36c51636c..6ca2216e4058 100644
--- a/drivers/net/ethernet/qlogic/qla3xxx.c
+++ b/drivers/net/ethernet/qlogic/qla3xxx.c
@@ -155,7 +155,7 @@ static int ql_wait_for_drvr_lock(struct ql3_adapter *qdev)
 				      "driver lock acquired\n");
 			return 1;
 		}
-		ssleep(1);
+		mdelay(1000);
 	} while (++i < 10);
 
 	netdev_err(qdev->ndev, "Timed out waiting for driver lock...\n");
@@ -3291,7 +3291,7 @@ static int ql_adapter_reset(struct ql3_adapter *qdev)
 		if ((value & ISP_CONTROL_SR) == 0)
 			break;
 
-		ssleep(1);
+		mdelay(1000);
 	} while ((--max_wait_time));
 
 	/*
@@ -3327,7 +3327,7 @@ static int ql_adapter_reset(struct ql3_adapter *qdev)
 						   ispControlStatus);
 			if ((value & ISP_CONTROL_FSR) == 0)
 				break;
-			ssleep(1);
+			mdelay(1000);
 		} while ((--max_wait_time));
 	}
 	if (max_wait_time == 0)
-- 
2.30.2