linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bean Huo <huobean@gmail.com>
To: alim.akhtar@samsung.com, avri.altman@wdc.com,
	asutoshd@codeaurora.org, jejb@linux.ibm.com,
	martin.petersen@oracle.com, stanley.chu@mediatek.com,
	beanhuo@micron.com, bvanassche@acm.org, cang@codeaurora.org,
	daejun7.park@samsung.com
Cc: linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v1 1/2] scsi: ufs: Add L2P entry swap quirk for Micron UFS in HPB READ command
Date: Wed,  4 Aug 2021 20:21:27 +0200	[thread overview]
Message-ID: <20210804182128.458356-2-huobean@gmail.com> (raw)
In-Reply-To: <20210804182128.458356-1-huobean@gmail.com>

From: Bean Huo <beanhuo@micron.com>

For the Micron UFS, L2P entry need to be swapped in HPB READ command
before sending HPB READ command to the UFS device. Add this quirk
UFS_DEVICE_QUIRK_SWAP_L2P_ENTRY_FOR_HPB_READ to fix this inconsistency.

Fixes: 2fff76f87542 ("scsi: ufs: ufshpb: Prepare HPB read for cached sub-region")
Signed-off-by: Bean Huo <beanhuo@micron.com>
---
 drivers/scsi/ufs/ufs_quirks.h |  6 ++++++
 drivers/scsi/ufs/ufshcd.c     |  3 ++-
 drivers/scsi/ufs/ufshpb.c     | 15 ++++++++++-----
 3 files changed, 18 insertions(+), 6 deletions(-)

diff --git a/drivers/scsi/ufs/ufs_quirks.h b/drivers/scsi/ufs/ufs_quirks.h
index 07f559ac5883..35ec9ea79869 100644
--- a/drivers/scsi/ufs/ufs_quirks.h
+++ b/drivers/scsi/ufs/ufs_quirks.h
@@ -116,4 +116,10 @@ struct ufs_dev_fix {
  */
 #define UFS_DEVICE_QUIRK_DELAY_AFTER_LPM        (1 << 11)
 
+/*
+ * Some UFS devices require L2P entry should be swapped before being sent to the
+ * UFS device for HPB READ command.
+ */
+#define UFS_DEVICE_QUIRK_SWAP_L2P_ENTRY_FOR_HPB_READ (1 << 12)
+
 #endif /* UFS_QUIRKS_H_ */
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 47a5085f16a9..c3a14d3b0030 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -199,7 +199,8 @@ ufs_get_desired_pm_lvl_for_dev_link_state(enum ufs_dev_pwr_mode dev_state,
 static struct ufs_dev_fix ufs_fixups[] = {
 	/* UFS cards deviations table */
 	UFS_FIX(UFS_VENDOR_MICRON, UFS_ANY_MODEL,
-		UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM),
+		UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM |
+		UFS_DEVICE_QUIRK_SWAP_L2P_ENTRY_FOR_HPB_READ),
 	UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
 		UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM |
 		UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE |
diff --git a/drivers/scsi/ufs/ufshpb.c b/drivers/scsi/ufs/ufshpb.c
index 54e8e019bdbe..d0eb14be47a3 100644
--- a/drivers/scsi/ufs/ufshpb.c
+++ b/drivers/scsi/ufs/ufshpb.c
@@ -323,15 +323,19 @@ ufshpb_get_pos_from_lpn(struct ufshpb_lu *hpb, unsigned long lpn, int *rgn_idx,
 }
 
 static void
-ufshpb_set_hpb_read_to_upiu(struct ufshpb_lu *hpb, struct ufshcd_lrb *lrbp,
-			    u32 lpn, __be64 ppn, u8 transfer_len, int read_id)
+ufshpb_set_hpb_read_to_upiu(struct ufs_hba *hba, struct ufshpb_lu *hpb,
+			    struct ufshcd_lrb *lrbp, u32 lpn, __be64 ppn,
+			    u8 transfer_len, int read_id)
 {
 	unsigned char *cdb = lrbp->cmd->cmnd;
-
+	__be64 ppn_tmp = ppn;
 	cdb[0] = UFSHPB_READ;
 
+	if (hba->dev_quirks & UFS_DEVICE_QUIRK_SWAP_L2P_ENTRY_FOR_HPB_READ)
+		ppn_tmp = swab64(ppn);
+
 	/* ppn value is stored as big-endian in the host memory */
-	memcpy(&cdb[6], &ppn, sizeof(__be64));
+	memcpy(&cdb[6], &ppn_tmp, sizeof(__be64));
 	cdb[14] = transfer_len;
 	cdb[15] = read_id;
 
@@ -689,7 +693,8 @@ int ufshpb_prep(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
 		}
 	}
 
-	ufshpb_set_hpb_read_to_upiu(hpb, lrbp, lpn, ppn, transfer_len, read_id);
+	ufshpb_set_hpb_read_to_upiu(hba, hpb, lrbp, lpn, ppn, transfer_len,
+				    read_id);
 
 	hpb->stats.hit_cnt++;
 	return 0;
-- 
2.25.1


  reply	other threads:[~2021-08-04 18:21 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-04 18:21 [PATCH v1 0/2] two changes for UFS/HPB Bean Huo
2021-08-04 18:21 ` Bean Huo [this message]
2021-08-05  6:34   ` [PATCH v1 1/2] scsi: ufs: Add L2P entry swap quirk for Micron UFS in HPB READ command Avri Altman
2021-08-04 18:21 ` [PATCH v1 2/2] scsi: ufs: Add lu_enable sysfs node Bean Huo
2021-08-05  6:35   ` Avri Altman
2021-08-06  3:21 ` [PATCH v1 0/2] two changes for UFS/HPB Martin K. Petersen
2021-08-10  5:20 ` Martin K. Petersen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210804182128.458356-2-huobean@gmail.com \
    --to=huobean@gmail.com \
    --cc=alim.akhtar@samsung.com \
    --cc=asutoshd@codeaurora.org \
    --cc=avri.altman@wdc.com \
    --cc=beanhuo@micron.com \
    --cc=bvanassche@acm.org \
    --cc=cang@codeaurora.org \
    --cc=daejun7.park@samsung.com \
    --cc=jejb@linux.ibm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=stanley.chu@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).