linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Samuel Holland <samuel@sholland.org>
To: Wim Van Sebroeck <wim@linux-watchdog.org>,
	Guenter Roeck <linux@roeck-us.net>,
	Rob Herring <robh+dt@kernel.org>,
	Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-sunxi@lists.linux.dev, linux-watchdog@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Samuel Holland <samuel@sholland.org>
Subject: [PATCH v2 1/3] dt-bindings: watchdog: sunxi: Add compatible for R329
Date: Wed,  4 Aug 2021 23:57:14 -0500	[thread overview]
Message-ID: <20210805045716.46141-1-samuel@sholland.org> (raw)

On existing SoCs, the watchdog has a single clock input: HOSC (OSC24M)
divided by 750.  However, starting with R329, LOSC (OSC32k) is added as
an alternative clock source, with a bit to switch between them.

Since 24 MHz / 750 == 32 kHz, not 32.768 kHz, the hardware adjusts the
cycle counts to keep the timeouts independent of the clock source. This
keeps the programming interface backward-compatible.

R329 also adds two new registers, to allow software to immediately drive
the SoC reset signal.

Signed-off-by: Samuel Holland <samuel@sholland.org>
---
Changes v1 to v2:
 - Switch from enum to const
 - Add descriptions to "clocks" items

 .../watchdog/allwinner,sun4i-a10-wdt.yaml     | 32 ++++++++++++++++++-
 1 file changed, 31 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
index 9aa3c313c49f..8fa5b0d32381 100644
--- a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
@@ -24,6 +24,7 @@ properties:
               - allwinner,sun50i-a100-wdt
               - allwinner,sun50i-h6-wdt
               - allwinner,sun50i-h616-wdt
+              - allwinner,sun50i-r329-wdt
           - const: allwinner,sun6i-a31-wdt
       - items:
           - const: allwinner,suniv-f1c100s-wdt
@@ -33,7 +34,18 @@ properties:
     maxItems: 1
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: High-frequency oscillator input, divided internally
+      - description: Low-frequency oscillator input, only found on some variants
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: hosc
+      - const: losc
 
   interrupts:
     maxItems: 1
@@ -44,6 +56,24 @@ required:
   - clocks
   - interrupts
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - allwinner,sun50i-r329-wdt
+
+then:
+  properties:
+    clocks:
+      minItems: 2
+
+    clock-names:
+      minItems: 2
+
+  required:
+    - clock-names
+
 unevaluatedProperties: false
 
 examples:
-- 
2.31.1


             reply	other threads:[~2021-08-05  4:57 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-05  4:57 Samuel Holland [this message]
2021-08-05  4:57 ` [PATCH v2 2/3] dt-bindings: watchdog: sunxi: Add compatible for D1 Samuel Holland
2021-08-18  9:07   ` Maxime Ripard
2021-08-28 16:23   ` Guenter Roeck
2021-08-05  4:57 ` [PATCH v2 3/3] watchdog: sunxi_wdt: Add support " Samuel Holland
2021-08-18  9:08   ` Maxime Ripard
2021-08-13 17:46 ` [PATCH v2 1/3] dt-bindings: watchdog: sunxi: Add compatible for R329 Rob Herring
2021-08-18  9:07 ` Maxime Ripard
2021-08-20  4:04   ` Samuel Holland

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210805045716.46141-1-samuel@sholland.org \
    --to=samuel@sholland.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jernej.skrabec@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=mripard@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=wens@csie.org \
    --cc=wim@linux-watchdog.org \
    --subject='Re: [PATCH v2 1/3] dt-bindings: watchdog: sunxi: Add compatible for R329' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
on how to clone and mirror all data and code used for this inbox