linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Thara Gopinath <thara.gopinath@linaro.org>
To: agross@kernel.org, bjorn.andersson@linaro.org,
	rui.zhang@intel.com, daniel.lezcano@linaro.org,
	viresh.kumar@linaro.org, rjw@rjwysocki.net, robh+dt@kernel.org
Cc: steev@kali.org, tdas@codeaurora.org, mka@chromium.org,
	linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: [Patch v5 5/6] arm64: dts: qcom: sdm845: Remove cpufreq cooling devices for CPU thermal zones
Date: Mon,  9 Aug 2021 15:16:03 -0400	[thread overview]
Message-ID: <20210809191605.3742979-6-thara.gopinath@linaro.org> (raw)
In-Reply-To: <20210809191605.3742979-1-thara.gopinath@linaro.org>

Now that Limits h/w is enabled to monitor thermal events around cpus and
throttle the cpu frequencies, remove cpufreq cooling device for the CPU
thermal zones which does software throttling of cpu frequencies.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
---

v2->v3:
	- Improved the subject header and descrption to better reflect the
	  patch as per Matthias's review comments.

v1->v2:
	Removing only cooling maps for cpu specific thermal zones keeping the
	trip point definitions intact as per Daniel's suggestion. This is to
	ensure that thermal zone temparature and trip violation information is
	available to any userspace daemon monitoring these zones.

 arch/arm64/boot/dts/qcom/sdm845.dtsi | 136 ---------------------------
 1 file changed, 136 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index d90c896cbac8..b348c1efa1fb 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -4994,23 +4994,6 @@ cpu0_crit: cpu_crit {
 					type = "critical";
 				};
 			};
-
-			cooling-maps {
-				map0 {
-					trip = <&cpu0_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-				map1 {
-					trip = <&cpu0_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
 		};
 
 		cpu1-thermal {
@@ -5038,23 +5021,6 @@ cpu1_crit: cpu_crit {
 					type = "critical";
 				};
 			};
-
-			cooling-maps {
-				map0 {
-					trip = <&cpu1_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-				map1 {
-					trip = <&cpu1_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
 		};
 
 		cpu2-thermal {
@@ -5082,23 +5048,6 @@ cpu2_crit: cpu_crit {
 					type = "critical";
 				};
 			};
-
-			cooling-maps {
-				map0 {
-					trip = <&cpu2_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-				map1 {
-					trip = <&cpu2_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
 		};
 
 		cpu3-thermal {
@@ -5126,23 +5075,6 @@ cpu3_crit: cpu_crit {
 					type = "critical";
 				};
 			};
-
-			cooling-maps {
-				map0 {
-					trip = <&cpu3_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-				map1 {
-					trip = <&cpu3_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
 		};
 
 		cpu4-thermal {
@@ -5170,23 +5102,6 @@ cpu4_crit: cpu_crit {
 					type = "critical";
 				};
 			};
-
-			cooling-maps {
-				map0 {
-					trip = <&cpu4_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-				map1 {
-					trip = <&cpu4_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
 		};
 
 		cpu5-thermal {
@@ -5214,23 +5129,6 @@ cpu5_crit: cpu_crit {
 					type = "critical";
 				};
 			};
-
-			cooling-maps {
-				map0 {
-					trip = <&cpu5_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-				map1 {
-					trip = <&cpu5_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
 		};
 
 		cpu6-thermal {
@@ -5258,23 +5156,6 @@ cpu6_crit: cpu_crit {
 					type = "critical";
 				};
 			};
-
-			cooling-maps {
-				map0 {
-					trip = <&cpu6_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-				map1 {
-					trip = <&cpu6_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
 		};
 
 		cpu7-thermal {
@@ -5302,23 +5183,6 @@ cpu7_crit: cpu_crit {
 					type = "critical";
 				};
 			};
-
-			cooling-maps {
-				map0 {
-					trip = <&cpu7_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-				map1 {
-					trip = <&cpu7_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
 		};
 
 		aoss0-thermal {
-- 
2.25.1


  parent reply	other threads:[~2021-08-09 19:16 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-09 19:15 [Patch v5 0/6] Introduce LMh driver for Qualcomm SoCs Thara Gopinath
2021-08-09 19:15 ` [Patch v5 1/6] firmware: qcom_scm: Introduce SCM calls to access LMh Thara Gopinath
2021-08-17 13:17   ` Daniel Lezcano
2021-08-17 14:07     ` Bjorn Andersson
2021-08-17 14:08       ` Daniel Lezcano
2021-08-09 19:16 ` [Patch v5 2/6] thermal: qcom: Add support for LMh driver Thara Gopinath
2021-08-21  9:41   ` Daniel Lezcano
2021-08-23 15:05     ` Bjorn Andersson
2021-08-23 15:57       ` Daniel Lezcano
2021-08-31 14:52         ` Thara Gopinath
2021-08-09 19:16 ` [Patch v5 3/6] cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support Thara Gopinath
2021-08-10  2:47   ` Viresh Kumar
2021-08-11 11:27     ` Thara Gopinath
2021-08-18  3:37   ` Viresh Kumar
2021-08-09 19:16 ` [Patch v5 4/6] arm64: dts: qcom: sdm45: Add support for LMh node Thara Gopinath
2021-08-09 19:16 ` Thara Gopinath [this message]
2021-08-09 19:16 ` [Patch v5 6/6] dt-bindings: thermal: Add dt binding for QCOM LMh Thara Gopinath
2021-08-09 19:16 ` Thara Gopinath
2021-08-17 18:56   ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210809191605.3742979-6-thara.gopinath@linaro.org \
    --to=thara.gopinath@linaro.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mka@chromium.org \
    --cc=rjw@rjwysocki.net \
    --cc=robh+dt@kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=steev@kali.org \
    --cc=tdas@codeaurora.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).