From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Andrew Lunn <andrew@lunn.ch>,
Heiner Kallweit <hkallweit1@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
Marek Vasut <marex@denx.de>, David Jander <david@protonic.nl>,
linux-hwmon@vger.kernel.org
Subject: [PATCH net-next v2 1/1] net: phy: nxp-tja11xx: log critical health state
Date: Wed, 11 Aug 2021 08:37:12 +0200 [thread overview]
Message-ID: <20210811063712.19695-1-o.rempel@pengutronix.de> (raw)
TJA1102 provides interrupt notification for the critical health states
like overtemperature and undervoltage.
The overtemperature bit is set if package temperature is beyond 155C°.
This functionality was tested by heating the package up to 200C°
The undervoltage bit is set if supply voltage drops beyond some critical
threshold. Currently not tested.
In a typical use case, both of this events should be logged and stored
(or send to some remote system) for further investigations.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
drivers/net/phy/nxp-tja11xx.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/nxp-tja11xx.c b/drivers/net/phy/nxp-tja11xx.c
index afd7afa1f498..9944cc501806 100644
--- a/drivers/net/phy/nxp-tja11xx.c
+++ b/drivers/net/phy/nxp-tja11xx.c
@@ -47,12 +47,14 @@
#define MII_INTSRC_LINK_FAIL BIT(10)
#define MII_INTSRC_LINK_UP BIT(9)
#define MII_INTSRC_MASK (MII_INTSRC_LINK_FAIL | MII_INTSRC_LINK_UP)
-#define MII_INTSRC_TEMP_ERR BIT(1)
#define MII_INTSRC_UV_ERR BIT(3)
+#define MII_INTSRC_TEMP_ERR BIT(1)
#define MII_INTEN 22
#define MII_INTEN_LINK_FAIL BIT(10)
#define MII_INTEN_LINK_UP BIT(9)
+#define MII_INTEN_UV_ERR BIT(3)
+#define MII_INTEN_TEMP_ERR BIT(1)
#define MII_COMMSTAT 23
#define MII_COMMSTAT_LINK_UP BIT(15)
@@ -607,7 +609,8 @@ static int tja11xx_config_intr(struct phy_device *phydev)
if (err)
return err;
- value = MII_INTEN_LINK_FAIL | MII_INTEN_LINK_UP;
+ value = MII_INTEN_LINK_FAIL | MII_INTEN_LINK_UP |
+ MII_INTEN_UV_ERR | MII_INTEN_TEMP_ERR;
err = phy_write(phydev, MII_INTEN, value);
} else {
err = phy_write(phydev, MII_INTEN, value);
@@ -622,6 +625,7 @@ static int tja11xx_config_intr(struct phy_device *phydev)
static irqreturn_t tja11xx_handle_interrupt(struct phy_device *phydev)
{
+ struct device *dev = &phydev->mdio.dev;
int irq_status;
irq_status = phy_read(phydev, MII_INTSRC);
@@ -630,6 +634,11 @@ static irqreturn_t tja11xx_handle_interrupt(struct phy_device *phydev)
return IRQ_NONE;
}
+ if (irq_status & MII_INTSRC_TEMP_ERR)
+ dev_warn(dev, "Overtemperature error detected (temp > 155C°).\n");
+ if (irq_status & MII_INTSRC_UV_ERR)
+ dev_warn(dev, "Undervoltage error detected.\n");
+
if (!(irq_status & MII_INTSRC_MASK))
return IRQ_NONE;
--
2.30.2
next reply other threads:[~2021-08-11 6:37 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-11 6:37 Oleksij Rempel [this message]
2021-08-11 14:59 ` [PATCH net-next v2 1/1] net: phy: nxp-tja11xx: log critical health state Andrew Lunn
2021-08-12 10:00 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210811063712.19695-1-o.rempel@pengutronix.de \
--to=o.rempel@pengutronix.de \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=david@protonic.nl \
--cc=hkallweit1@gmail.com \
--cc=jdelvare@suse.com \
--cc=kernel@pengutronix.de \
--cc=kuba@kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=marex@denx.de \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).