linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 0/8] phy-rockchip-inno-usb2: support rk356x usb2phy
@ 2021-08-12 20:41 Peter Geis
  2021-08-12 20:41 ` [PATCH v2 1/8] dt-bindings: soc: rockchip: add rk3568-usb2phy-grf Peter Geis
                   ` (8 more replies)
  0 siblings, 9 replies; 14+ messages in thread
From: Peter Geis @ 2021-08-12 20:41 UTC (permalink / raw)
  Cc: linux-phy, devicetree, linux-arm-kernel, linux-rockchip,
	linux-kernel, Peter Geis

Good Afternoon,

This is my series to support the usb2 phy devices on the rk356x.
The rk356x phy has a single muxed interrupt and has moved the usb2phy
nodes out of the grf and into their own nodes.
The phy needs to tie back into the grf for register control, similar to
the rv1108.
By moving the phys into their own nodes, they now have full
#address_cells = 2 register addresses, but they still reside below the 32bit
mmio range.

This driver series only supports the host configuration for the rk356x.
I have have tested it on the following:
rk3566 - Pine64 Quartz64 Model A
rk3399 - Pine64 Rockpro64

Please provide feedback and comments as you see fit.

Changelog:
v2:
- correct the order of the usb2phy-grf dt-bindings patch, thanks Johan
- correct the conditional requirements of phy-rockchip-inno-usb2, thanks
  Johan
- drop increase generic-ohci clocks patch, thanks Heiko
- correct rk356x.dtsi ordering
- fix a dtbs-check callout

Peter Geis (8):
  dt-bindings: soc: rockchip: add rk3568-usb2phy-grf
  dt-bindings: phy: phy-rockchip-inno-usb2: add rk3568 documentation
  phy: phy-rockchip-inno-usb2: support #address_cells = 2
  phy: phy-rockchip-inno-usb2: support standalone phy nodes
  phy: phy-rockchip-inno-usb2: support muxed interrupts
  phy: phy-rockchip-inno-usb2: add rk3568 support
  arm64: dts: rockchip: add usb2 nodes to rk3568 device tree
  arm64: dts: rockchip: add Quartz64-A usb2 support

 .../bindings/phy/phy-rockchip-inno-usb2.yaml  |  31 ++-
 .../devicetree/bindings/soc/rockchip/grf.yaml |   1 +
 .../boot/dts/rockchip/rk3566-quartz64-a.dts   |  52 ++++
 arch/arm64/boot/dts/rockchip/rk356x.dtsi      |  98 +++++++
 drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 259 ++++++++++++++----
 5 files changed, 383 insertions(+), 58 deletions(-)

-- 
2.25.1


^ permalink raw reply	[flat|nested] 14+ messages in thread

end of thread, other threads:[~2021-10-14 10:11 UTC | newest]

Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-12 20:41 [PATCH v2 0/8] phy-rockchip-inno-usb2: support rk356x usb2phy Peter Geis
2021-08-12 20:41 ` [PATCH v2 1/8] dt-bindings: soc: rockchip: add rk3568-usb2phy-grf Peter Geis
2021-08-17 21:31   ` Rob Herring
2021-08-12 20:41 ` [PATCH v2 2/8] dt-bindings: phy: phy-rockchip-inno-usb2: add rk3568 documentation Peter Geis
2021-08-17 16:52   ` Johan Jonker
2021-08-17 21:43     ` Rob Herring
2021-08-12 20:41 ` [PATCH v2 3/8] phy: phy-rockchip-inno-usb2: support #address_cells = 2 Peter Geis
2021-08-12 20:41 ` [PATCH v2 4/8] phy: phy-rockchip-inno-usb2: support standalone phy nodes Peter Geis
2021-08-12 20:41 ` [PATCH v2 5/8] phy: phy-rockchip-inno-usb2: support muxed interrupts Peter Geis
2021-08-12 20:41 ` [PATCH v2 6/8] phy: phy-rockchip-inno-usb2: add rk3568 support Peter Geis
2021-08-12 20:41 ` [PATCH v2 7/8] arm64: dts: rockchip: add usb2 nodes to rk3568 device tree Peter Geis
2021-10-14 10:02   ` Michael Riesch
2021-08-12 20:41 ` [PATCH v2 8/8] arm64: dts: rockchip: add Quartz64-A usb2 support Peter Geis
2021-10-14 10:11 ` [PATCH v2 0/8] phy-rockchip-inno-usb2: support rk356x usb2phy Michael Riesch

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).