* [PATCH v2 0/2] Add UFS PHY support for SM6115/4250
@ 2021-08-13 20:11 Iskren Chernev
2021-08-13 20:11 ` [PATCH v2 1/2] dt-bindings: phy: qcom,qmp: Add SM6115 UFS PHY bindings Iskren Chernev
2021-08-13 20:11 ` [PATCH v2 2/2] phy: qcom-qmp: Add support for SM6115 UFS phy Iskren Chernev
0 siblings, 2 replies; 4+ messages in thread
From: Iskren Chernev @ 2021-08-13 20:11 UTC (permalink / raw)
To: Bjorn Andersson, Vinod Koul
Cc: Andy Gross, Kishon Vijay Abraham I, Rob Herring, devicetree,
linux-arm-msm, linux-kernel, linux-phy, phone-devel,
~postmarketos/upstreaming, Iskren Chernev
The UFS PHY found on SM6115/4250 is named v3-660, found on cheaper qcom devices
(possibly starting with sdm660), but up until recently wasn't used much due to
prevalence of sdhc port for internal storage/sdcard.
The name is a bit misleading, because most of the registers found on v3-660
don't share much in common with v3.
The register values/sequences are taken from OnePlus repo [1].
[1] https://github.com/OnePlusOSS/android_kernel_oneplus_sm4250
v1: https://lkml.org/lkml/2021/8/5/235
Changes from v1:
- Suggested by Vinod
- removed v3-660 constants for regs with same name and value as v3 regs
Iskren Chernev (2):
dt-bindings: phy: qcom,qmp: Add SM6115 UFS PHY bindings
phy: qcom-qmp: Add support for SM6115 UFS phy
.../devicetree/bindings/phy/qcom,qmp-phy.yaml | 1 +
drivers/phy/qualcomm/phy-qcom-qmp.c | 124 ++++++++++++++++
drivers/phy/qualcomm/phy-qcom-qmp.h | 134 ++++++++++++++++++
3 files changed, 259 insertions(+)
base-commit: 8d4b477da1a807199ca60e0829357ce7aa6758d5
--
2.32.0
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH v2 1/2] dt-bindings: phy: qcom,qmp: Add SM6115 UFS PHY bindings
2021-08-13 20:11 [PATCH v2 0/2] Add UFS PHY support for SM6115/4250 Iskren Chernev
@ 2021-08-13 20:11 ` Iskren Chernev
2021-08-13 20:11 ` [PATCH v2 2/2] phy: qcom-qmp: Add support for SM6115 UFS phy Iskren Chernev
1 sibling, 0 replies; 4+ messages in thread
From: Iskren Chernev @ 2021-08-13 20:11 UTC (permalink / raw)
To: Bjorn Andersson, Vinod Koul
Cc: Andy Gross, Kishon Vijay Abraham I, Rob Herring, devicetree,
linux-arm-msm, linux-kernel, linux-phy, phone-devel,
~postmarketos/upstreaming, Iskren Chernev, Rob Herring,
Manu Gautam
Add the compatible strings for the UFS PHY found on SM4250/6115 SoC.
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
index 242560ff52a4..7c3c8710ab47 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
@@ -35,6 +35,7 @@ properties:
- qcom,sdm845-qmp-ufs-phy
- qcom,sdm845-qmp-usb3-phy
- qcom,sdm845-qmp-usb3-uni-phy
+ - qcom,sm6115-qmp-ufs-phy
- qcom,sm8150-qmp-ufs-phy
- qcom,sm8150-qmp-usb3-phy
- qcom,sm8150-qmp-usb3-uni-phy
--
2.32.0
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH v2 2/2] phy: qcom-qmp: Add support for SM6115 UFS phy
2021-08-13 20:11 [PATCH v2 0/2] Add UFS PHY support for SM6115/4250 Iskren Chernev
2021-08-13 20:11 ` [PATCH v2 1/2] dt-bindings: phy: qcom,qmp: Add SM6115 UFS PHY bindings Iskren Chernev
@ 2021-08-13 20:11 ` Iskren Chernev
2021-08-17 5:34 ` Vinod Koul
1 sibling, 1 reply; 4+ messages in thread
From: Iskren Chernev @ 2021-08-13 20:11 UTC (permalink / raw)
To: Bjorn Andersson, Vinod Koul
Cc: Andy Gross, Kishon Vijay Abraham I, Rob Herring, devicetree,
linux-arm-msm, linux-kernel, linux-phy, phone-devel,
~postmarketos/upstreaming, Iskren Chernev
Add the tables and constants for init sequences for UFS QMP phy found in
SM4250/6115 SoC. The phy is a variation of the v3 phy found on sdm845
called v3-660 (possibly first occurrence in the sdm660).
There are a few similar registers with the v3 phy (notably the first
SERDES ones), the rest are different.
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
---
drivers/phy/qualcomm/phy-qcom-qmp.c | 124 +++++++++++++++++++++++++
drivers/phy/qualcomm/phy-qcom-qmp.h | 134 ++++++++++++++++++++++++++++
2 files changed, 258 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 2195f8ac393b..a7f6c281f035 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -234,6 +234,11 @@ static const unsigned int sdm845_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
[QPHY_PCS_READY_STATUS] = 0x160,
};
+static const unsigned int sm6115_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_START_CTRL] = 0x00,
+ [QPHY_PCS_READY_STATUS] = 0x168,
+};
+
static const unsigned int sm8250_pcie_regs_layout[QPHY_LAYOUT_SIZE] = {
[QPHY_SW_RESET] = 0x00,
[QPHY_START_CTRL] = 0x44,
@@ -1329,6 +1334,97 @@ static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG2, 0x60),
};
+static const struct qmp_phy_init_tbl sm6115_ufsphy_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_CMN_CONFIG, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_SYSCLK_EN_SEL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_CORECLK_DIV, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_CORECLK_DIV_MODE1, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_LOCK_CMP_EN, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_VCO_TUNE_CTRL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_VCO_TUNE_TIMER1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_VCO_TUNE_TIMER2, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_VCO_TUNE_MAP, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_SVS_MODE_CLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_DIV_FRAC_START1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_DIV_FRAC_START2_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_DIV_FRAC_START3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_CP_CTRL_MODE0, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_VCO_TUNE1_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_VCO_TUNE2_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_LOCK_CMP1_MODE0, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_LOCK_CMP2_MODE0, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_DEC_START_MODE1, 0x98),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_DIV_FRAC_START1_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_DIV_FRAC_START2_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_DIV_FRAC_START3_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_CP_CTRL_MODE1, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_PLL_CCTRL_MODE1, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_INTEGLOOP_GAIN0_MODE1, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_VCO_TUNE1_MODE1, 0xd6),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_VCO_TUNE2_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_LOCK_CMP1_MODE1, 0x32),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_LOCK_CMP2_MODE1, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_LOCK_CMP3_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_BG_TRIM, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_VCO_TUNE_INITVAL1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_VCO_TUNE_INITVAL2, 0x00),
+
+ /* Rate B */
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_VCO_TUNE_MAP, 0x44),
+};
+
+static const struct qmp_phy_init_tbl sm6115_ufsphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN, 0x45),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_TX_LANE_MODE, 0x06),
+};
+
+static const struct qmp_phy_init_tbl sm6115_ufsphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_RX_SIGDET_LVL, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_RX_SIGDET_CNTRL, 0x0F),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_RX_RX_INTERFACE_MODE, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_RX_SIGDET_DEGLITCH_CNTRL, 0x1E),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_RX_RX_TERM_BW, 0x5B),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_RX_RX_EQ_GAIN1_LSB, 0xFF),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_RX_RX_EQ_GAIN1_MSB, 0x3F),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_RX_RX_EQ_GAIN2_LSB, 0xFF),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_RX_RX_EQ_GAIN2_MSB, 0x3F),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0D),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_RX_UCDR_SVS_SO_GAIN_HALF, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_RX_UCDR_SVS_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_RX_UCDR_SO_SATURATION_ENABLE, 0x5B),
+};
+
+static const struct qmp_phy_init_tbl sm6115_ufsphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_660_PCS_RX_PWM_GEAR_BAND, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_660_PCS_RX_SIGDET_CTRL2, 0x6d),
+ QMP_PHY_INIT_CFG(QPHY_V3_660_PCS_TX_LARGE_AMP_DRV_LVL, 0x0f),
+ QMP_PHY_INIT_CFG(QPHY_V3_660_PCS_TX_SMALL_AMP_DRV_LVL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_660_PCS_RX_MIN_STALL_NOCONFIG_TIME_CAP, 0x28),
+ QMP_PHY_INIT_CFG(QPHY_V3_660_PCS_RX_SYM_RESYNC_CTRL, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_660_PCS_TX_LARGE_AMP_POST_EMP_LVL, 0x12),
+ QMP_PHY_INIT_CFG(QPHY_V3_660_PCS_TX_SMALL_AMP_POST_EMP_LVL, 0x0f),
+ QMP_PHY_INIT_CFG(QPHY_V3_660_PCS_RX_MIN_HIBERN8_TIME, 0x9a), /* 8 us */
+};
+
static const struct qmp_phy_init_tbl sdm845_ufsphy_serdes_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04),
@@ -3396,6 +3492,31 @@ static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {
.no_pcs_sw_reset = true,
};
+static const struct qmp_phy_cfg sm6115_ufsphy_cfg = {
+ .type = PHY_TYPE_UFS,
+ .nlanes = 1,
+
+ .serdes_tbl = sm6115_ufsphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm6115_ufsphy_serdes_tbl),
+ .tx_tbl = sm6115_ufsphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm6115_ufsphy_tx_tbl),
+ .rx_tbl = sm6115_ufsphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm6115_ufsphy_rx_tbl),
+ .pcs_tbl = sm6115_ufsphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm6115_ufsphy_pcs_tbl),
+ .clk_list = sdm845_ufs_phy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm6115_ufsphy_regs_layout,
+
+ .start_ctrl = SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+
+ .is_dual_lane_phy = false,
+ .no_pcs_sw_reset = true,
+};
+
static const struct qmp_phy_cfg msm8998_pciephy_cfg = {
.type = PHY_TYPE_PCIE,
.nlanes = 1,
@@ -5395,6 +5516,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
}, {
.compatible = "qcom,msm8998-qmp-usb3-phy",
.data = &msm8998_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sm6115-qmp-ufs-phy",
+ .data = &sm6115_ufsphy_cfg,
}, {
.compatible = "qcom,sm8150-qmp-ufs-phy",
.data = &sm8150_ufsphy_cfg,
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index 6592b58b13f6..fde1bff16e27 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -280,6 +280,8 @@
#define QSERDES_V3_COM_SSC_PER2 0x020
#define QSERDES_V3_COM_SSC_STEP_SIZE1 0x024
#define QSERDES_V3_COM_SSC_STEP_SIZE2 0x028
+#define QSERDES_V3_COM_POST_DIV 0x02c
+#define QSERDES_V3_COM_POST_DIV_MUX 0x030
#define QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN 0x034
# define QSERDES_V3_COM_BIAS_EN 0x0001
# define QSERDES_V3_COM_BIAS_EN_MUX 0x0002
@@ -291,6 +293,7 @@
#define QSERDES_V3_COM_CLK_ENABLE1 0x038
#define QSERDES_V3_COM_SYS_CLK_CTRL 0x03c
#define QSERDES_V3_COM_SYSCLK_BUF_ENABLE 0x040
+#define QSERDES_V3_COM_PLL_EN 0x044
#define QSERDES_V3_COM_PLL_IVCO 0x048
#define QSERDES_V3_COM_LOCK_CMP1_MODE0 0x098
#define QSERDES_V3_COM_LOCK_CMP2_MODE0 0x09c
@@ -348,6 +351,100 @@
#define QSERDES_V3_COM_DEBUG_BUS_SEL 0x178
#define QSERDES_V3_COM_CMN_MODE 0x184
+/* Only for QMP V3 660 PHY - QSERDES COM registers*/
+#define QSERDES_V3_660_COM_LOCK_CMP1_MODE0 0x04c
+#define QSERDES_V3_660_COM_LOCK_CMP2_MODE0 0x050
+#define QSERDES_V3_660_COM_LOCK_CMP3_MODE0 0x054
+#define QSERDES_V3_660_COM_LOCK_CMP1_MODE1 0x058
+#define QSERDES_V3_660_COM_LOCK_CMP2_MODE1 0x05c
+#define QSERDES_V3_660_COM_LOCK_CMP3_MODE1 0x060
+#define QSERDES_V3_660_COM_CMD_RSVD0 0x064
+#define QSERDES_V3_660_COM_EP_CLOCK_DETECT_CTRL 0x068
+#define QSERDES_V3_660_COM_SYSCLK_DET_COMP_STATUS 0x06c
+#define QSERDES_V3_660_COM_BG_TRIM 0x070
+#define QSERDES_V3_660_COM_CLK_EP_DIV 0x074
+#define QSERDES_V3_660_COM_CP_CTRL_MODE0 0x078
+#define QSERDES_V3_660_COM_CP_CTRL_MODE1 0x07c
+#define QSERDES_V3_660_COM_CMN_RSVD1 0x080
+#define QSERDES_V3_660_COM_PLL_RCTRL_MODE0 0x084
+#define QSERDES_V3_660_COM_PLL_RCTRL_MODE1 0x088
+#define QSERDES_V3_660_COM_CMN_RSVD2 0x08c
+#define QSERDES_V3_660_COM_PLL_CCTRL_MODE0 0x090
+#define QSERDES_V3_660_COM_PLL_CCTRL_MODE1 0x094
+#define QSERDES_V3_660_COM_CMN_RSVD3 0x098
+#define QSERDES_V3_660_COM_PLL_CNTRL 0x09c
+#define QSERDES_V3_660_COM_PHASE_SEL_CTRL 0x0a0
+#define QSERDES_V3_660_COM_PHASE_SEL_DC 0x0a4
+#define QSERDES_V3_660_COM_BIAS_EN_CTRL_BY_PSM 0x0a8
+#define QSERDES_V3_660_COM_SYSCLK_EN_SEL 0x0ac
+#define QSERDES_V3_660_COM_CML_SYSCLK_SEL 0x0b0
+#define QSERDES_V3_660_COM_RESETSM_CNTRL 0x0b4
+#define QSERDES_V3_660_COM_RESETSM_CNTRL2 0x0b8
+#define QSERDES_V3_660_COM_RESTRIM_CTRL 0x0bc
+#define QSERDES_V3_660_COM_RESTRIM_CTRL2 0x0c0
+#define QSERDES_V3_660_COM_LOCK_CMP_EN 0x0c8
+#define QSERDES_V3_660_COM_LOCK_CMP_CFG 0x0cc
+#define QSERDES_V3_660_COM_DEC_START_MODE0 0x0d0
+#define QSERDES_V3_660_COM_DEC_START_MODE1 0x0d4
+#define QSERDES_V3_660_COM_VCOCAL_DEADMAN_CTRL 0x0d8
+#define QSERDES_V3_660_COM_DIV_FRAC_START1_MODE0 0x0dc
+#define QSERDES_V3_660_COM_DIV_FRAC_START2_MODE0 0x0e0
+#define QSERDES_V3_660_COM_DIV_FRAC_START3_MODE0 0x0e4
+#define QSERDES_V3_660_COM_DIV_FRAC_START1_MODE1 0x0e8
+#define QSERDES_V3_660_COM_DIV_FRAC_START2_MODE1 0x0ec
+#define QSERDES_V3_660_COM_DIV_FRAC_START3_MODE1 0x0f0
+#define QSERDES_V3_660_COM_VCO_TUNE_MINVAL1 0x0f4
+#define QSERDES_V3_660_COM_VCO_TUNE_MINVAL2 0x0f8
+#define QSERDES_V3_660_COM_CMN_RSVD4 0x0fc
+#define QSERDES_V3_660_COM_INTEGLOOP_INITVAL 0x100
+#define QSERDES_V3_660_COM_INTEGLOOP_EN 0x104
+#define QSERDES_V3_660_COM_INTEGLOOP_GAIN0_MODE0 0x108
+#define QSERDES_V3_660_COM_INTEGLOOP_GAIN1_MODE0 0x10c
+#define QSERDES_V3_660_COM_INTEGLOOP_GAIN0_MODE1 0x110
+#define QSERDES_V3_660_COM_INTEGLOOP_GAIN1_MODE1 0x114
+#define QSERDES_V3_660_COM_VCO_TUNE_MAXVAL1 0x118
+#define QSERDES_V3_660_COM_VCO_TUNE_MAXVAL2 0x11c
+#define QSERDES_V3_660_COM_RES_TRIM_CONTROL2 0x120
+#define QSERDES_V3_660_COM_VCO_TUNE_CTRL 0x124
+#define QSERDES_V3_660_COM_VCO_TUNE_MAP 0x128
+#define QSERDES_V3_660_COM_VCO_TUNE1_MODE0 0x12c
+#define QSERDES_V3_660_COM_VCO_TUNE2_MODE0 0x130
+#define QSERDES_V3_660_COM_VCO_TUNE1_MODE1 0x134
+#define QSERDES_V3_660_COM_VCO_TUNE2_MODE1 0x138
+#define QSERDES_V3_660_COM_VCO_TUNE_INITVAL1 0x13c
+#define QSERDES_V3_660_COM_VCO_TUNE_INITVAL2 0x140
+#define QSERDES_V3_660_COM_VCO_TUNE_TIMER1 0x144
+#define QSERDES_V3_660_COM_VCO_TUNE_TIMER2 0x148
+#define QSERDES_V3_660_COM_SAR 0x14c
+#define QSERDES_V3_660_COM_SAR_CLK 0x150
+#define QSERDES_V3_660_COM_SAR_CODE_OUT_STATUS 0x154
+#define QSERDES_V3_660_COM_SAR_CODE_READY_STATUS 0x158
+#define QSERDES_V3_660_COM_CMN_STATUS 0x15c
+#define QSERDES_V3_660_COM_RESET_SM_STATUS 0x160
+#define QSERDES_V3_660_COM_RESTRIM_CODE_STATUS 0x164
+#define QSERDES_V3_660_COM_PLLCAL_CODE1_STATUS 0x168
+#define QSERDES_V3_660_COM_PLLCAL_CODE2_STATUS 0x16c
+#define QSERDES_V3_660_COM_BG_CTRL 0x170
+#define QSERDES_V3_660_COM_CLK_SELECT 0x174
+#define QSERDES_V3_660_COM_HSCLK_SEL 0x178
+#define QSERDES_V3_660_COM_INTEGLOOP_BINCODE_STATUS 0x17c
+#define QSERDES_V3_660_COM_PLL_ANALOG 0x180
+#define QSERDES_V3_660_COM_CORECLK_DIV 0x184
+#define QSERDES_V3_660_COM_SW_RESET 0x188
+#define QSERDES_V3_660_COM_CORE_CLK_EN 0x18c
+#define QSERDES_V3_660_COM_C_READY_STATUS 0x190
+#define QSERDES_V3_660_COM_CMN_CONFIG 0x194
+#define QSERDES_V3_660_COM_CMN_RATE_OVERRIDE 0x198
+#define QSERDES_V3_660_COM_SVS_MODE_CLK_SEL 0x19c
+#define QSERDES_V3_660_COM_DEBUG_BUS0 0x1a0
+#define QSERDES_V3_660_COM_DEBUG_BUS1 0x1a4
+#define QSERDES_V3_660_COM_DEBUG_BUS2 0x1a8
+#define QSERDES_V3_660_COM_DEBUG_BUS3 0x1ac
+#define QSERDES_V3_660_COM_DEBUG_BUS_SEL 0x1b0
+#define QSERDES_V3_660_COM_CMN_MISC1 0x1b4
+#define QSERDES_V3_660_COM_CORECLK_DIV_MODE1 0x1bc
+#define QSERDES_V3_660_COM_CMN_RSVD5 0x1c0
+
/* Only for QMP V3 PHY - TX registers */
#define QSERDES_V3_TX_BIST_MODE_LANENO 0x000
#define QSERDES_V3_TX_CLKBUF_ENABLE 0x008
@@ -380,6 +477,10 @@
#define QSERDES_V3_TX_TX_INTERFACE_MODE 0x0c4
#define QSERDES_V3_TX_VMODE_CTRL1 0x0f0
+/* Only for QMP V3 660 PHY - TX registers */
+#define QSERDES_V3_660_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN 0x068
+#define QSERDES_V3_660_TX_LANE_MODE 0x094
+
/* Only for QMP V3 PHY - RX registers */
#define QSERDES_V3_RX_UCDR_FO_GAIN 0x008
#define QSERDES_V3_RX_UCDR_SO_GAIN_HALF 0x00c
@@ -411,6 +512,24 @@
#define QSERDES_V3_RX_RX_MODE_00 0x164
#define QSERDES_V3_RX_RX_MODE_01 0x168
+/* Only for QMP V3 660 PHY - RX registers */
+#define QSERDES_V3_660_RX_UCDR_SVS_SO_GAIN_HALF 0x030
+#define QSERDES_V3_660_RX_UCDR_SVS_SO_GAIN_QUARTER 0x034
+#define QSERDES_V3_660_RX_UCDR_SVS_SO_GAIN_EIGHTH 0x038
+#define QSERDES_V3_660_RX_UCDR_SVS_SO_GAIN 0x03c
+#define QSERDES_V3_660_RX_UCDR_FASTLOCK_FO_GAIN 0x040
+#define QSERDES_V3_660_RX_UCDR_SO_SATURATION_ENABLE 0x048
+#define QSERDES_V3_660_RX_RX_TERM_BW 0x090
+#define QSERDES_V3_660_RX_RX_EQ_GAIN1_LSB 0x0c4
+#define QSERDES_V3_660_RX_RX_EQ_GAIN1_MSB 0x0c8
+#define QSERDES_V3_660_RX_RX_EQ_GAIN2_LSB 0x0cc
+#define QSERDES_V3_660_RX_RX_EQ_GAIN2_MSB 0x0d0
+#define QSERDES_V3_660_RX_RX_EQU_ADAPTOR_CNTRL2 0x0d8
+#define QSERDES_V3_660_RX_SIGDET_CNTRL 0x114
+#define QSERDES_V3_660_RX_SIGDET_LVL 0x118
+#define QSERDES_V3_660_RX_SIGDET_DEGLITCH_CNTRL 0x11c
+#define QSERDES_V3_660_RX_RX_INTERFACE_MODE 0x12c
+
/* Only for QMP V3 PHY - PCS registers */
#define QPHY_V3_PCS_POWER_DOWN_CONTROL 0x004
#define QPHY_V3_PCS_TXMGN_V0 0x00c
@@ -473,6 +592,21 @@
#define QPHY_V3_PCS_REFGEN_REQ_CONFIG1 0x20c
#define QPHY_V3_PCS_REFGEN_REQ_CONFIG2 0x210
+/* Only for QMP V3 660 PHY - PCS registers */
+#define QPHY_V3_660_PCS_PHY_START 0x000
+#define QPHY_V3_660_PCS_POWER_DOWN_CONTROL 0x004
+#define QPHY_V3_660_PCS_TX_LARGE_AMP_DRV_LVL 0x034
+#define QPHY_V3_660_PCS_TX_LARGE_AMP_POST_EMP_LVL 0x038
+#define QPHY_V3_660_PCS_TX_SMALL_AMP_DRV_LVL 0x03c
+#define QPHY_V3_660_PCS_TX_SMALL_AMP_POST_EMP_LVL 0x040
+#define QPHY_V3_660_PCS_RX_MIN_STALL_NOCONFIG_TIME_CAP 0x0cc
+#define QPHY_V3_660_PCS_LINECFG_DISABLE 0x138
+#define QPHY_V3_660_PCS_RX_SYM_RESYNC_CTRL 0x13c
+#define QPHY_V3_660_PCS_RX_MIN_HIBERN8_TIME 0x140
+#define QPHY_V3_660_PCS_RX_SIGDET_CTRL2 0x148
+#define QPHY_V3_660_PCS_RX_PWM_GEAR_BAND 0x154
+#define QPHY_V3_660_PCS_PCS_READY_STATUS 0x168
+
/* Only for QMP V3 PHY - PCS_MISC registers */
#define QPHY_V3_PCS_MISC_CLAMP_ENABLE 0x0c
#define QPHY_V3_PCS_MISC_OSC_DTCT_CONFIG2 0x2c
--
2.32.0
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v2 2/2] phy: qcom-qmp: Add support for SM6115 UFS phy
2021-08-13 20:11 ` [PATCH v2 2/2] phy: qcom-qmp: Add support for SM6115 UFS phy Iskren Chernev
@ 2021-08-17 5:34 ` Vinod Koul
0 siblings, 0 replies; 4+ messages in thread
From: Vinod Koul @ 2021-08-17 5:34 UTC (permalink / raw)
To: Iskren Chernev
Cc: Bjorn Andersson, Andy Gross, Kishon Vijay Abraham I, Rob Herring,
devicetree, linux-arm-msm, linux-kernel, linux-phy, phone-devel,
~postmarketos/upstreaming
On 13-08-21, 23:11, Iskren Chernev wrote:
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
> index 6592b58b13f6..fde1bff16e27 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp.h
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
> @@ -280,6 +280,8 @@
> #define QSERDES_V3_COM_SSC_PER2 0x020
> #define QSERDES_V3_COM_SSC_STEP_SIZE1 0x024
> #define QSERDES_V3_COM_SSC_STEP_SIZE2 0x028
> +#define QSERDES_V3_COM_POST_DIV 0x02c
> +#define QSERDES_V3_COM_POST_DIV_MUX 0x030
> #define QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN 0x034
> # define QSERDES_V3_COM_BIAS_EN 0x0001
> # define QSERDES_V3_COM_BIAS_EN_MUX 0x0002
> @@ -291,6 +293,7 @@
> #define QSERDES_V3_COM_CLK_ENABLE1 0x038
> #define QSERDES_V3_COM_SYS_CLK_CTRL 0x03c
> #define QSERDES_V3_COM_SYSCLK_BUF_ENABLE 0x040
> +#define QSERDES_V3_COM_PLL_EN 0x044
> #define QSERDES_V3_COM_PLL_IVCO 0x048
> #define QSERDES_V3_COM_LOCK_CMP1_MODE0 0x098
> #define QSERDES_V3_COM_LOCK_CMP2_MODE0 0x09c
> @@ -348,6 +351,100 @@
> #define QSERDES_V3_COM_DEBUG_BUS_SEL 0x178
> #define QSERDES_V3_COM_CMN_MODE 0x184
>
> +/* Only for QMP V3 660 PHY - QSERDES COM registers*/
> +#define QSERDES_V3_660_COM_LOCK_CMP1_MODE0 0x04c
> +#define QSERDES_V3_660_COM_LOCK_CMP2_MODE0 0x050
> +#define QSERDES_V3_660_COM_LOCK_CMP3_MODE0 0x054
> +#define QSERDES_V3_660_COM_LOCK_CMP1_MODE1 0x058
> +#define QSERDES_V3_660_COM_LOCK_CMP2_MODE1 0x05c
> +#define QSERDES_V3_660_COM_LOCK_CMP3_MODE1 0x060
> +#define QSERDES_V3_660_COM_CMD_RSVD0 0x064
Are you sure this is v3, this looks like V2 offsets:
#define QSERDES_COM_LOCK_CMP1_MODE0 0x04c
#define QSERDES_COM_LOCK_CMP2_MODE0 0x050
#define QSERDES_COM_LOCK_CMP3_MODE0 0x054
#define QSERDES_COM_LOCK_CMP1_MODE1 0x058
#define QSERDES_COM_LOCK_CMP2_MODE1 0x05c
#define QSERDES_COM_LOCK_CMP3_MODE1 0x060
> +#define QSERDES_V3_660_COM_EP_CLOCK_DETECT_CTRL 0x068
> +#define QSERDES_V3_660_COM_SYSCLK_DET_COMP_STATUS 0x06c
This is new
> +#define QSERDES_V3_660_COM_BG_TRIM 0x070
> +#define QSERDES_V3_660_COM_CLK_EP_DIV 0x074
> +#define QSERDES_V3_660_COM_CP_CTRL_MODE0 0x078
Same as v2
So can you run these offsets against v2 and recheck... there is some
confusion always with version numbers with this IP!
> +#define QSERDES_V3_660_COM_CP_CTRL_MODE1 0x07c
> +#define QSERDES_V3_660_COM_CMN_RSVD1 0x080
> +#define QSERDES_V3_660_COM_PLL_RCTRL_MODE0 0x084
> +#define QSERDES_V3_660_COM_PLL_RCTRL_MODE1 0x088
> +#define QSERDES_V3_660_COM_CMN_RSVD2 0x08c
> +#define QSERDES_V3_660_COM_PLL_CCTRL_MODE0 0x090
> +#define QSERDES_V3_660_COM_PLL_CCTRL_MODE1 0x094
> +#define QSERDES_V3_660_COM_CMN_RSVD3 0x098
> +#define QSERDES_V3_660_COM_PLL_CNTRL 0x09c
> +#define QSERDES_V3_660_COM_PHASE_SEL_CTRL 0x0a0
> +#define QSERDES_V3_660_COM_PHASE_SEL_DC 0x0a4
> +#define QSERDES_V3_660_COM_BIAS_EN_CTRL_BY_PSM 0x0a8
> +#define QSERDES_V3_660_COM_SYSCLK_EN_SEL 0x0ac
> +#define QSERDES_V3_660_COM_CML_SYSCLK_SEL 0x0b0
> +#define QSERDES_V3_660_COM_RESETSM_CNTRL 0x0b4
> +#define QSERDES_V3_660_COM_RESETSM_CNTRL2 0x0b8
> +#define QSERDES_V3_660_COM_RESTRIM_CTRL 0x0bc
> +#define QSERDES_V3_660_COM_RESTRIM_CTRL2 0x0c0
> +#define QSERDES_V3_660_COM_LOCK_CMP_EN 0x0c8
> +#define QSERDES_V3_660_COM_LOCK_CMP_CFG 0x0cc
> +#define QSERDES_V3_660_COM_DEC_START_MODE0 0x0d0
> +#define QSERDES_V3_660_COM_DEC_START_MODE1 0x0d4
> +#define QSERDES_V3_660_COM_VCOCAL_DEADMAN_CTRL 0x0d8
> +#define QSERDES_V3_660_COM_DIV_FRAC_START1_MODE0 0x0dc
> +#define QSERDES_V3_660_COM_DIV_FRAC_START2_MODE0 0x0e0
> +#define QSERDES_V3_660_COM_DIV_FRAC_START3_MODE0 0x0e4
> +#define QSERDES_V3_660_COM_DIV_FRAC_START1_MODE1 0x0e8
> +#define QSERDES_V3_660_COM_DIV_FRAC_START2_MODE1 0x0ec
> +#define QSERDES_V3_660_COM_DIV_FRAC_START3_MODE1 0x0f0
> +#define QSERDES_V3_660_COM_VCO_TUNE_MINVAL1 0x0f4
> +#define QSERDES_V3_660_COM_VCO_TUNE_MINVAL2 0x0f8
> +#define QSERDES_V3_660_COM_CMN_RSVD4 0x0fc
> +#define QSERDES_V3_660_COM_INTEGLOOP_INITVAL 0x100
> +#define QSERDES_V3_660_COM_INTEGLOOP_EN 0x104
> +#define QSERDES_V3_660_COM_INTEGLOOP_GAIN0_MODE0 0x108
> +#define QSERDES_V3_660_COM_INTEGLOOP_GAIN1_MODE0 0x10c
> +#define QSERDES_V3_660_COM_INTEGLOOP_GAIN0_MODE1 0x110
> +#define QSERDES_V3_660_COM_INTEGLOOP_GAIN1_MODE1 0x114
> +#define QSERDES_V3_660_COM_VCO_TUNE_MAXVAL1 0x118
> +#define QSERDES_V3_660_COM_VCO_TUNE_MAXVAL2 0x11c
> +#define QSERDES_V3_660_COM_RES_TRIM_CONTROL2 0x120
> +#define QSERDES_V3_660_COM_VCO_TUNE_CTRL 0x124
> +#define QSERDES_V3_660_COM_VCO_TUNE_MAP 0x128
> +#define QSERDES_V3_660_COM_VCO_TUNE1_MODE0 0x12c
> +#define QSERDES_V3_660_COM_VCO_TUNE2_MODE0 0x130
> +#define QSERDES_V3_660_COM_VCO_TUNE1_MODE1 0x134
> +#define QSERDES_V3_660_COM_VCO_TUNE2_MODE1 0x138
> +#define QSERDES_V3_660_COM_VCO_TUNE_INITVAL1 0x13c
> +#define QSERDES_V3_660_COM_VCO_TUNE_INITVAL2 0x140
> +#define QSERDES_V3_660_COM_VCO_TUNE_TIMER1 0x144
> +#define QSERDES_V3_660_COM_VCO_TUNE_TIMER2 0x148
> +#define QSERDES_V3_660_COM_SAR 0x14c
> +#define QSERDES_V3_660_COM_SAR_CLK 0x150
> +#define QSERDES_V3_660_COM_SAR_CODE_OUT_STATUS 0x154
> +#define QSERDES_V3_660_COM_SAR_CODE_READY_STATUS 0x158
> +#define QSERDES_V3_660_COM_CMN_STATUS 0x15c
> +#define QSERDES_V3_660_COM_RESET_SM_STATUS 0x160
> +#define QSERDES_V3_660_COM_RESTRIM_CODE_STATUS 0x164
> +#define QSERDES_V3_660_COM_PLLCAL_CODE1_STATUS 0x168
> +#define QSERDES_V3_660_COM_PLLCAL_CODE2_STATUS 0x16c
> +#define QSERDES_V3_660_COM_BG_CTRL 0x170
> +#define QSERDES_V3_660_COM_CLK_SELECT 0x174
> +#define QSERDES_V3_660_COM_HSCLK_SEL 0x178
> +#define QSERDES_V3_660_COM_INTEGLOOP_BINCODE_STATUS 0x17c
> +#define QSERDES_V3_660_COM_PLL_ANALOG 0x180
> +#define QSERDES_V3_660_COM_CORECLK_DIV 0x184
> +#define QSERDES_V3_660_COM_SW_RESET 0x188
> +#define QSERDES_V3_660_COM_CORE_CLK_EN 0x18c
> +#define QSERDES_V3_660_COM_C_READY_STATUS 0x190
> +#define QSERDES_V3_660_COM_CMN_CONFIG 0x194
> +#define QSERDES_V3_660_COM_CMN_RATE_OVERRIDE 0x198
> +#define QSERDES_V3_660_COM_SVS_MODE_CLK_SEL 0x19c
> +#define QSERDES_V3_660_COM_DEBUG_BUS0 0x1a0
> +#define QSERDES_V3_660_COM_DEBUG_BUS1 0x1a4
> +#define QSERDES_V3_660_COM_DEBUG_BUS2 0x1a8
> +#define QSERDES_V3_660_COM_DEBUG_BUS3 0x1ac
> +#define QSERDES_V3_660_COM_DEBUG_BUS_SEL 0x1b0
> +#define QSERDES_V3_660_COM_CMN_MISC1 0x1b4
> +#define QSERDES_V3_660_COM_CORECLK_DIV_MODE1 0x1bc
> +#define QSERDES_V3_660_COM_CMN_RSVD5 0x1c0
> +
> /* Only for QMP V3 PHY - TX registers */
> #define QSERDES_V3_TX_BIST_MODE_LANENO 0x000
> #define QSERDES_V3_TX_CLKBUF_ENABLE 0x008
> @@ -380,6 +477,10 @@
> #define QSERDES_V3_TX_TX_INTERFACE_MODE 0x0c4
> #define QSERDES_V3_TX_VMODE_CTRL1 0x0f0
>
> +/* Only for QMP V3 660 PHY - TX registers */
> +#define QSERDES_V3_660_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN 0x068
> +#define QSERDES_V3_660_TX_LANE_MODE 0x094
> +
> /* Only for QMP V3 PHY - RX registers */
> #define QSERDES_V3_RX_UCDR_FO_GAIN 0x008
> #define QSERDES_V3_RX_UCDR_SO_GAIN_HALF 0x00c
> @@ -411,6 +512,24 @@
> #define QSERDES_V3_RX_RX_MODE_00 0x164
> #define QSERDES_V3_RX_RX_MODE_01 0x168
>
> +/* Only for QMP V3 660 PHY - RX registers */
> +#define QSERDES_V3_660_RX_UCDR_SVS_SO_GAIN_HALF 0x030
> +#define QSERDES_V3_660_RX_UCDR_SVS_SO_GAIN_QUARTER 0x034
> +#define QSERDES_V3_660_RX_UCDR_SVS_SO_GAIN_EIGHTH 0x038
> +#define QSERDES_V3_660_RX_UCDR_SVS_SO_GAIN 0x03c
> +#define QSERDES_V3_660_RX_UCDR_FASTLOCK_FO_GAIN 0x040
> +#define QSERDES_V3_660_RX_UCDR_SO_SATURATION_ENABLE 0x048
> +#define QSERDES_V3_660_RX_RX_TERM_BW 0x090
> +#define QSERDES_V3_660_RX_RX_EQ_GAIN1_LSB 0x0c4
> +#define QSERDES_V3_660_RX_RX_EQ_GAIN1_MSB 0x0c8
> +#define QSERDES_V3_660_RX_RX_EQ_GAIN2_LSB 0x0cc
> +#define QSERDES_V3_660_RX_RX_EQ_GAIN2_MSB 0x0d0
> +#define QSERDES_V3_660_RX_RX_EQU_ADAPTOR_CNTRL2 0x0d8
> +#define QSERDES_V3_660_RX_SIGDET_CNTRL 0x114
> +#define QSERDES_V3_660_RX_SIGDET_LVL 0x118
> +#define QSERDES_V3_660_RX_SIGDET_DEGLITCH_CNTRL 0x11c
> +#define QSERDES_V3_660_RX_RX_INTERFACE_MODE 0x12c
> +
> /* Only for QMP V3 PHY - PCS registers */
> #define QPHY_V3_PCS_POWER_DOWN_CONTROL 0x004
> #define QPHY_V3_PCS_TXMGN_V0 0x00c
> @@ -473,6 +592,21 @@
> #define QPHY_V3_PCS_REFGEN_REQ_CONFIG1 0x20c
> #define QPHY_V3_PCS_REFGEN_REQ_CONFIG2 0x210
>
> +/* Only for QMP V3 660 PHY - PCS registers */
> +#define QPHY_V3_660_PCS_PHY_START 0x000
> +#define QPHY_V3_660_PCS_POWER_DOWN_CONTROL 0x004
> +#define QPHY_V3_660_PCS_TX_LARGE_AMP_DRV_LVL 0x034
> +#define QPHY_V3_660_PCS_TX_LARGE_AMP_POST_EMP_LVL 0x038
> +#define QPHY_V3_660_PCS_TX_SMALL_AMP_DRV_LVL 0x03c
> +#define QPHY_V3_660_PCS_TX_SMALL_AMP_POST_EMP_LVL 0x040
> +#define QPHY_V3_660_PCS_RX_MIN_STALL_NOCONFIG_TIME_CAP 0x0cc
> +#define QPHY_V3_660_PCS_LINECFG_DISABLE 0x138
> +#define QPHY_V3_660_PCS_RX_SYM_RESYNC_CTRL 0x13c
> +#define QPHY_V3_660_PCS_RX_MIN_HIBERN8_TIME 0x140
> +#define QPHY_V3_660_PCS_RX_SIGDET_CTRL2 0x148
> +#define QPHY_V3_660_PCS_RX_PWM_GEAR_BAND 0x154
> +#define QPHY_V3_660_PCS_PCS_READY_STATUS 0x168
> +
> /* Only for QMP V3 PHY - PCS_MISC registers */
> #define QPHY_V3_PCS_MISC_CLAMP_ENABLE 0x0c
> #define QPHY_V3_PCS_MISC_OSC_DTCT_CONFIG2 0x2c
> --
> 2.32.0
--
~Vinod
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-08-17 5:35 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-13 20:11 [PATCH v2 0/2] Add UFS PHY support for SM6115/4250 Iskren Chernev
2021-08-13 20:11 ` [PATCH v2 1/2] dt-bindings: phy: qcom,qmp: Add SM6115 UFS PHY bindings Iskren Chernev
2021-08-13 20:11 ` [PATCH v2 2/2] phy: qcom-qmp: Add support for SM6115 UFS phy Iskren Chernev
2021-08-17 5:34 ` Vinod Koul
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).