From: Billy Tsai <billy_tsai@aspeedtech.com>
To: <jic23@kernel.org>, <lars@metafoo.de>, <pmeerw@pmeerw.net>,
<robh+dt@kernel.org>, <joel@jms.id.au>, <andrew@aj.id.au>,
<p.zabel@pengutronix.de>, <lgirdwood@gmail.com>,
<broonie@kernel.org>, <linux-iio@vger.kernel.org>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>
Cc: <BMC-SW@aspeedtech.com>
Subject: [v3 02/15] iio: adc: aspeed: completes the bitfield declare.
Date: Mon, 16 Aug 2021 18:48:33 +0800 [thread overview]
Message-ID: <20210816104846.13155-3-billy_tsai@aspeedtech.com> (raw)
In-Reply-To: <20210816104846.13155-1-billy_tsai@aspeedtech.com>
This patch completes the declare of adc register bitfields and uses the
same prefix ASPEED_ADC_* for these bitfields.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
---
drivers/iio/adc/aspeed_adc.c | 56 +++++++++++++++++++++++++-----------
1 file changed, 39 insertions(+), 17 deletions(-)
diff --git a/drivers/iio/adc/aspeed_adc.c b/drivers/iio/adc/aspeed_adc.c
index 19efaa41bc34..7010d56ac3b9 100644
--- a/drivers/iio/adc/aspeed_adc.c
+++ b/drivers/iio/adc/aspeed_adc.c
@@ -3,6 +3,7 @@
* Aspeed AST2400/2500 ADC
*
* Copyright (C) 2017 Google, Inc.
+ * Copyright (C) 2021 Aspeed Technology Inc.
*/
#include <linux/clk.h>
@@ -16,6 +17,7 @@
#include <linux/reset.h>
#include <linux/spinlock.h>
#include <linux/types.h>
+#include <linux/bitfield.h>
#include <linux/iio/iio.h>
#include <linux/iio/driver.h>
@@ -28,15 +30,31 @@
#define ASPEED_REG_INTERRUPT_CONTROL 0x04
#define ASPEED_REG_VGA_DETECT_CONTROL 0x08
#define ASPEED_REG_CLOCK_CONTROL 0x0C
-#define ASPEED_REG_MAX 0xC0
-
-#define ASPEED_OPERATION_MODE_POWER_DOWN (0x0 << 1)
-#define ASPEED_OPERATION_MODE_STANDBY (0x1 << 1)
-#define ASPEED_OPERATION_MODE_NORMAL (0x7 << 1)
-
-#define ASPEED_ENGINE_ENABLE BIT(0)
-
-#define ASPEED_ADC_CTRL_INIT_RDY BIT(8)
+#define ASPEED_REG_COMPENSATION_TRIM 0xC4
+#define ASPEED_REG_MAX 0xCC
+
+#define ASPEED_ADC_ENGINE_ENABLE BIT(0)
+#define ASPEED_ADC_OP_MODE GENMASK(3, 1)
+#define ASPEED_ADC_OP_MODE_PWR_DOWN 0
+#define ASPEED_ADC_OP_MODE_STANDBY 1
+#define ASPEED_ADC_OP_MODE_NORMAL 7
+#define ASPEED_ADC_CTRL_COMPENSATION BIT(4)
+#define ASPEED_ADC_AUTO_COMPENSATION BIT(5)
+#define ASPEED_ADC_REF_VOLTAGE GENMASK(7, 6)
+#define ASPEED_ADC_REF_VOLTAGE_2500mV 0
+#define ASPEED_ADC_REF_VOLTAGE_1200mV 1
+#define ASPEED_ADC_REF_VOLTAGE_EXT_HIGH 2
+#define ASPEED_ADC_REF_VOLTAGE_EXT_LOW 3
+#define ASPEED_ADC_BAT_SENSING_DIV BIT(6)
+#define ASPEED_ADC_BAT_SENSING_DIV_2_3 0
+#define ASPEED_ADC_BAT_SENSING_DIV_1_3 1
+#define ASPEED_ADC_CTRL_INIT_RDY BIT(8)
+#define ASPEED_ADC_CH7_MODE BIT(12)
+#define ASPEED_ADC_CH7_NORMAL 0
+#define ASPEED_ADC_CH7_BAT 1
+#define ASPEED_ADC_BAT_SENSING_ENABLE BIT(13)
+#define ASPEED_ADC_CTRL_CHANNEL GENMASK(31, 16)
+#define ASPEED_ADC_CTRL_CHANNEL_ENABLE(ch) FIELD_PREP(ASPEED_ADC_CTRL_CHANNEL, BIT(ch))
#define ASPEED_ADC_INIT_POLLING_TIME 500
#define ASPEED_ADC_INIT_TIMEOUT 500000
@@ -226,7 +244,9 @@ static int aspeed_adc_probe(struct platform_device *pdev)
if (model_data->wait_init_sequence) {
/* Enable engine in normal mode. */
- writel(ASPEED_OPERATION_MODE_NORMAL | ASPEED_ENGINE_ENABLE,
+ writel(FIELD_PREP(ASPEED_ADC_OP_MODE,
+ ASPEED_ADC_OP_MODE_NORMAL) |
+ ASPEED_ADC_ENGINE_ENABLE,
data->base + ASPEED_REG_ENGINE_CONTROL);
/* Wait for initial sequence complete. */
@@ -245,10 +265,12 @@ static int aspeed_adc_probe(struct platform_device *pdev)
if (ret)
goto clk_enable_error;
- adc_engine_control_reg_val = GENMASK(31, 16) |
- ASPEED_OPERATION_MODE_NORMAL | ASPEED_ENGINE_ENABLE;
+ adc_engine_control_reg_val =
+ ASPEED_ADC_CTRL_CHANNEL |
+ FIELD_PREP(ASPEED_ADC_OP_MODE, ASPEED_ADC_OP_MODE_NORMAL) |
+ ASPEED_ADC_ENGINE_ENABLE;
writel(adc_engine_control_reg_val,
- data->base + ASPEED_REG_ENGINE_CONTROL);
+ data->base + ASPEED_REG_ENGINE_CONTROL);
model_data = of_device_get_match_data(&pdev->dev);
indio_dev->name = model_data->model_name;
@@ -264,8 +286,8 @@ static int aspeed_adc_probe(struct platform_device *pdev)
return 0;
iio_register_error:
- writel(ASPEED_OPERATION_MODE_POWER_DOWN,
- data->base + ASPEED_REG_ENGINE_CONTROL);
+ writel(FIELD_PREP(ASPEED_ADC_OP_MODE, ASPEED_ADC_OP_MODE_PWR_DOWN),
+ data->base + ASPEED_REG_ENGINE_CONTROL);
clk_disable_unprepare(data->clk_scaler->clk);
clk_enable_error:
poll_timeout_error:
@@ -283,8 +305,8 @@ static int aspeed_adc_remove(struct platform_device *pdev)
struct aspeed_adc_data *data = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
- writel(ASPEED_OPERATION_MODE_POWER_DOWN,
- data->base + ASPEED_REG_ENGINE_CONTROL);
+ writel(FIELD_PREP(ASPEED_ADC_OP_MODE, ASPEED_ADC_OP_MODE_PWR_DOWN),
+ data->base + ASPEED_REG_ENGINE_CONTROL);
clk_disable_unprepare(data->clk_scaler->clk);
reset_control_assert(data->rst);
clk_hw_unregister_divider(data->clk_scaler);
--
2.25.1
next prev parent reply other threads:[~2021-08-16 10:51 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-16 10:48 [v3 00/15] Add support for ast2600 ADC Billy Tsai
2021-08-16 10:48 ` [v3 01/15] dt-bindings: iio: adc: Add ast2600-adc bindings Billy Tsai
2021-08-16 20:07 ` Rob Herring
2021-08-16 10:48 ` Billy Tsai [this message]
2021-08-16 10:48 ` [v3 03/15] iio: adc: aspeed: set driver data when adc probe Billy Tsai
2021-08-16 10:48 ` [v3 04/15] iio: adc: aspeed: Keep model data to driver data Billy Tsai
2021-08-16 10:48 ` [v3 05/15] iio: adc: aspeed: Refactory model data structure Billy Tsai
2021-08-16 10:48 ` [v3 06/15] iio: adc: aspeed: Add vref config function Billy Tsai
2021-08-16 10:48 ` [v3 07/15] iio: adc: aspeed: Set num_channels with model data Billy Tsai
2021-08-16 10:48 ` [v3 09/15] iio: adc: aspeed: Use devm_add_action_or_reset Billy Tsai
2021-08-16 10:48 ` [v3 11/15] iio: adc: aspeed: Fix the calculate error of clock Billy Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210816104846.13155-3-billy_tsai@aspeedtech.com \
--to=billy_tsai@aspeedtech.com \
--cc=BMC-SW@aspeedtech.com \
--cc=andrew@aj.id.au \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=joel@jms.id.au \
--cc=lars@metafoo.de \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).