linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Marcel Holtmann <marcel@holtmann.org>,
	Johan Hedberg <johan.hedberg@gmail.com>,
	Luiz Augusto von Dentz <luiz.dentz@gmail.com>,
	Kalle Valo <kvalo@codeaurora.org>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: linux-arm-msm@vger.kernel.org, linux-mmc@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-bluetooth@vger.kernel.org,
	ath10k@lists.infradead.org, linux-wireless@vger.kernel.org,
	netdev@vger.kernel.org
Subject: [RFC PATCH 06/15] Bluetooth: hci_qca: merge init paths
Date: Tue, 17 Aug 2021 03:54:58 +0300	[thread overview]
Message-ID: <20210817005507.1507580-7-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20210817005507.1507580-1-dmitry.baryshkov@linaro.org>

The hci_qca driver has almost identical init paths. Merge them together
to remove duplication in preparation to adding power sequencer support.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/bluetooth/hci_qca.c | 76 ++++++++++++++++---------------------
 1 file changed, 33 insertions(+), 43 deletions(-)

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index a21cec44720a..279b802f0952 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -2020,11 +2020,12 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 	if (!qcadev->oper_speed)
 		BT_DBG("UART will pick default operating speed");
 
-	if (data &&
-	    (qca_is_wcn399x(data->soc_type) ||
-	    qca_is_wcn6750(data->soc_type))) {
+	if (data)
 		qcadev->btsoc_type = data->soc_type;
+	else
+		qcadev->btsoc_type = QCA_ROME;
 
+	if (data && data->num_vregs) {
 		err = qca_init_regulators(qcadev, &serdev->dev, data->vregs,
 					  data->num_vregs);
 		if (err) {
@@ -2033,48 +2034,33 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 		}
 
 		qcadev->vregs_on = false;
+	}
 
-		qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
-					       GPIOD_OUT_LOW);
-		if (!qcadev->bt_en && data->soc_type == QCA_WCN6750) {
+	qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
+			GPIOD_OUT_LOW);
+	if (!qcadev->bt_en) {
+		if (qca_is_wcn6750(data->soc_type)) {
 			dev_err(&serdev->dev, "failed to acquire BT_EN gpio\n");
 			power_ctrl_enabled = false;
-		}
-
-		qcadev->sw_ctrl = devm_gpiod_get_optional(&serdev->dev, "swctrl",
-					       GPIOD_IN);
-		if (!qcadev->sw_ctrl && data->soc_type == QCA_WCN6750)
-			dev_warn(&serdev->dev, "failed to acquire SW_CTRL gpio\n");
-
-		qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
-		if (IS_ERR(qcadev->susclk)) {
-			dev_err(&serdev->dev, "failed to acquire clk\n");
-			return PTR_ERR(qcadev->susclk);
-		}
-
-		err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
-		if (err) {
-			BT_ERR("wcn3990 serdev registration failed");
-			return err;
-		}
-	} else {
-		if (data)
-			qcadev->btsoc_type = data->soc_type;
-		else
-			qcadev->btsoc_type = QCA_ROME;
-
-		qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
-					       GPIOD_OUT_LOW);
-		if (!qcadev->bt_en) {
+		} else if (!qca_is_wcn399x(data->soc_type)) {
 			dev_warn(&serdev->dev, "failed to acquire enable gpio\n");
 			power_ctrl_enabled = false;
 		}
+	}
 
-		qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
-		if (IS_ERR(qcadev->susclk)) {
-			dev_warn(&serdev->dev, "failed to acquire clk\n");
-			return PTR_ERR(qcadev->susclk);
-		}
+	qcadev->sw_ctrl = devm_gpiod_get_optional(&serdev->dev, "swctrl",
+			GPIOD_IN);
+	if (!qcadev->sw_ctrl && qca_is_wcn6750(data->soc_type))
+		dev_warn(&serdev->dev, "failed to acquire SW_CTRL gpio\n");
+
+	qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
+	if (IS_ERR(qcadev->susclk)) {
+		dev_err(&serdev->dev, "failed to acquire clk\n");
+		return PTR_ERR(qcadev->susclk);
+	}
+
+	if (!qca_is_wcn399x(data->soc_type) &&
+	    !qca_is_wcn6750(data->soc_type)) {
 		err = clk_set_rate(qcadev->susclk, SUSCLK_RATE_32KHZ);
 		if (err)
 			return err;
@@ -2082,13 +2068,17 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 		err = clk_prepare_enable(qcadev->susclk);
 		if (err)
 			return err;
+	}
 
-		err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
-		if (err) {
-			BT_ERR("Rome serdev registration failed");
+	err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
+	if (err) {
+		BT_ERR("QCA serdev registration failed");
+
+		if (!qca_is_wcn399x(data->soc_type) &&
+		    !qca_is_wcn6750(data->soc_type))
 			clk_disable_unprepare(qcadev->susclk);
-			return err;
-		}
+
+		return err;
 	}
 
 	hdev = qcadev->serdev_hu.hdev;
-- 
2.30.2


  parent reply	other threads:[~2021-08-17  0:55 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-17  0:54 [RFC PATCH 00/15] create power sequencing subsystem Dmitry Baryshkov
2021-08-17  0:54 ` [RFC PATCH 01/15] power: add power sequencer subsystem Dmitry Baryshkov
2021-08-19 23:37   ` Bjorn Andersson
2021-08-17  0:54 ` [RFC PATCH 02/15] pwrseq: port MMC's pwrseq drivers to new pwrseq subsystem Dmitry Baryshkov
2021-08-17  0:54 ` [RFC PATCH 03/15] mmc: core: switch " Dmitry Baryshkov
2021-08-17  0:54 ` [RFC PATCH 04/15] ath10k: add support for pwrseq sequencing Dmitry Baryshkov
2021-08-17  0:54 ` [RFC PATCH 05/15] Bluetooth: hci_qca: merge qca_power into qca_serdev Dmitry Baryshkov
2021-08-17  0:54 ` Dmitry Baryshkov [this message]
2021-08-17  0:54 ` [RFC PATCH 07/15] Bluetooth: hci_qca: merge qca_power_on with qca_regulators_init Dmitry Baryshkov
2021-08-17  0:55 ` [RFC PATCH 08/15] Bluetooth: hci_qca: futher rework of power on/off handling Dmitry Baryshkov
2021-08-17  0:55 ` [RFC PATCH 09/15] Bluetooth: hci_qca: add support for pwrseq Dmitry Baryshkov
2021-08-17  0:55 ` [RFC PATCH 10/15] pwrseq: add support for QCA BT+WiFi power sequencer Dmitry Baryshkov
2021-08-19 23:18   ` Bjorn Andersson
2021-08-20  8:10     ` Dmitry Baryshkov
2021-08-20 16:35       ` Bjorn Andersson
2021-08-17  0:55 ` [RFC PATCH 11/15] arm64: dts: qcom: sdm845-db845c: switch bt+wifi to qca " Dmitry Baryshkov
2021-08-19 23:40   ` Bjorn Andersson
2021-08-17  0:55 ` [RFC PATCH 12/15] arm64: dts: qcom: qrb5165-rb5: add bluetooth support Dmitry Baryshkov
2021-08-17  0:55 ` [RFC PATCH 13/15] arm64: dts: qcom: sdm845-db845c: add second channel support to qca power sequencer Dmitry Baryshkov
2021-08-17  0:55 ` [RFC PATCH 14/15] WIP: PCI: qcom: use pwrseq to power up bus devices Dmitry Baryshkov
2021-08-19 23:44   ` Bjorn Andersson
2021-08-20  8:50     ` Dmitry Baryshkov
2021-08-17  0:55 ` [RFC PATCH 15/15] WIP: arm64: dts: qcom: qrb5165-rb5: add bus-pwrseq property to pcie0 Dmitry Baryshkov
2021-08-19 15:23 ` [RFC PATCH 00/15] create power sequencing subsystem Marcel Holtmann
2021-08-20 13:08   ` Dmitry Baryshkov
2021-08-20 17:02     ` Bjorn Andersson
2021-08-20 18:06       ` Dmitry Baryshkov
2021-08-21  6:50     ` Marcel Holtmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210817005507.1507580-7-dmitry.baryshkov@linaro.org \
    --to=dmitry.baryshkov@linaro.org \
    --cc=agross@kernel.org \
    --cc=ath10k@lists.infradead.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=davem@davemloft.net \
    --cc=johan.hedberg@gmail.com \
    --cc=kuba@kernel.org \
    --cc=kvalo@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=luiz.dentz@gmail.com \
    --cc=marcel@holtmann.org \
    --cc=netdev@vger.kernel.org \
    --cc=svarbanov@mm-sol.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).