linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marc Kleine-Budde <mkl@pengutronix.de>
To: Vincent MAILHOL <mailhol.vincent@wanadoo.fr>
Cc: linux-can <linux-can@vger.kernel.org>,
	"Stefan Mätje" <Stefan.Maetje@esd.eu>,
	netdev <netdev@vger.kernel.org>,
	"open list" <linux-kernel@vger.kernel.org>,
	"Thomas Kopp" <thomas.kopp@microchip.com>
Subject: Re: [PATCH v5 2/7] can: bittiming: allow TDC{V,O} to be zero and add can_tdc_const::tdc{v,o,f}_min
Date: Tue, 17 Aug 2021 11:43:06 +0200	[thread overview]
Message-ID: <20210817094306.iyezzml6m7nlznri@pengutronix.de> (raw)
In-Reply-To: <20210816143052.3brm6ny26jy3nbkq@pengutronix.de>

[-- Attachment #1: Type: text/plain, Size: 1709 bytes --]

On 16.08.2021 16:30:52, Marc Kleine-Budde wrote:
> > Finally, I did a bit of research and found that:
> > http://ww1.microchip.com/downloads/en/DeviceDoc/Section_56_Controller_Area_Network_with_Flexible_Data_rate_DS60001549A.pdf

> > This is *not* the mcp25xxfd datasheet but it is still from
> > Microship and as you will see, it is mostly similar to the
> > mcp25xxfd except for, you guessed it, the TDCO.
> > 
> > It reads:
> > | TDCMOD<1:0>: Transmitter Delay Compensation Mode bits
> > | Secondary Sample Point (SSP).
> > | 10 = Auto; measure delay and add CFDxDBTCFG.TSEG1; add TDCO
> > | 11 = Auto; measure delay and add CFDxDBTCFG.TSEG1; add TDCO
> > | 01 = Manual; Do not measure, use TDCV plus TDCO from the register
> > | 00 = Disable
> > 
> > | TDCO<6:0>: Transmitter Delay Compensation Offset bits
> > | Secondary Sample Point (SSP). Two's complement; offset can be
> > positive, zero, or negative.
> > | 1111111 = -64 x SYSCLK
> > | .
> > | .
> > | .
> > | 0111111 = 63 x SYSCLK
> > | .
> > | .
> > | .
> > | 0000000 = 0 x SYSCLK
> > 
> > Here, you can clearly see that the TDCO has the exact same range
> > as the one of the mcp25xxfd but the description of TDCMOD
> > changes, telling us that:
> > 
> > | SSP = TDCV (measured delay) + CFDxDBTCFG.TSEG1 (sample point) + TDCO
> > 
> > Which means this is a relative TDCO.

Good catch! Microchip is investigating this.

regards,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

  reply	other threads:[~2021-08-17  9:43 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-15  3:32 [PATCH v5 0/7] add the netlink interface for CAN-FD Transmitter Delay Compensation (TDC) Vincent Mailhol
2021-08-15  3:32 ` [PATCH v5 1/7] can: netlink: allow user to turn off unsupported features Vincent Mailhol
2021-08-19  7:45   ` Marc Kleine-Budde
2021-08-19  9:24     ` Vincent MAILHOL
2021-08-19 10:07       ` Marc Kleine-Budde
2021-08-15  3:32 ` [PATCH v5 2/7] can: bittiming: allow TDC{V,O} to be zero and add can_tdc_const::tdc{v,o,f}_min Vincent Mailhol
2021-08-16  8:42   ` Marc Kleine-Budde
2021-08-16 10:24     ` Vincent MAILHOL
2021-08-16 12:25       ` Marc Kleine-Budde
2021-08-16 12:33         ` Marc Kleine-Budde
2021-08-16 13:43           ` Marc Kleine-Budde
2021-08-16 15:49             ` Vincent MAILHOL
2021-08-16 16:04               ` Vincent MAILHOL
2021-08-17  1:12                 ` Vincent MAILHOL
2021-08-17 20:01               ` Marc Kleine-Budde
2021-08-18  9:22                 ` Vincent MAILHOL
2021-08-18 12:29                   ` Marc Kleine-Budde
2021-08-18 14:17                     ` Vincent MAILHOL
2021-08-20  6:12                       ` Vincent MAILHOL
2021-08-16 14:10           ` Vincent MAILHOL
2021-08-16 14:30             ` Marc Kleine-Budde
2021-08-17  9:43               ` Marc Kleine-Budde [this message]
2021-08-16 13:49         ` Stefan Mätje
2021-08-16 15:56           ` Vincent MAILHOL
2021-08-15  3:32 ` [PATCH v5 3/7] can: bittiming: change unit of TDC parameters to clock periods Vincent Mailhol
2021-08-15  3:32 ` [PATCH v5 4/7] can: dev: add can_tdc_get_relative_tdco() helper function Vincent Mailhol
2021-08-16 11:27   ` Marc Kleine-Budde
2021-08-15  3:32 ` [PATCH v5 5/7] can: netlink: add interface for CAN-FD Transmitter Delay Compensation (TDC) Vincent Mailhol
2021-08-17 19:55   ` Marc Kleine-Budde
2021-08-18  8:08     ` Vincent MAILHOL
2021-08-18  8:19       ` Marc Kleine-Budde
2021-08-18  8:37         ` Vincent MAILHOL
2021-08-18  8:43           ` Marc Kleine-Budde
2021-08-15  3:32 ` [PATCH v5 6/7] can: netlink: add can_priv::do_get_auto_tdcv() to retrieve tdcv from device Vincent Mailhol
2021-08-15  3:32 ` [PATCH v5 7/7] can: etas_es58x: clean-up documentation of struct es58x_fd_tx_conf_msg Vincent Mailhol
2021-08-19 10:08   ` Marc Kleine-Budde

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210817094306.iyezzml6m7nlznri@pengutronix.de \
    --to=mkl@pengutronix.de \
    --cc=Stefan.Maetje@esd.eu \
    --cc=linux-can@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mailhol.vincent@wanadoo.fr \
    --cc=netdev@vger.kernel.org \
    --cc=thomas.kopp@microchip.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).