linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yu Zhao <yuzhao@google.com>
To: linux-mm@kvack.org
Cc: linux-kernel@vger.kernel.org, Hillf Danton <hdanton@sina.com>,
	page-reclaim@google.com, Yu Zhao <yuzhao@google.com>,
	Konstantin Kharlamov <Hi-Angel@yandex.ru>
Subject: [PATCH v4 03/11] mm/vmscan.c: refactor shrink_node()
Date: Wed, 18 Aug 2021 00:30:59 -0600	[thread overview]
Message-ID: <20210818063107.2696454-4-yuzhao@google.com> (raw)
In-Reply-To: <20210818063107.2696454-1-yuzhao@google.com>

This patch refactors shrink_node(). This will make the upcoming
changes to mm/vmscan.c more readable.

Signed-off-by: Yu Zhao <yuzhao@google.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
---
 mm/vmscan.c | 186 +++++++++++++++++++++++++++-------------------------
 1 file changed, 98 insertions(+), 88 deletions(-)

diff --git a/mm/vmscan.c b/mm/vmscan.c
index 4620df62f0ff..b6d14880bd76 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -2437,6 +2437,103 @@ enum scan_balance {
 	SCAN_FILE,
 };
 
+static void prepare_scan_count(pg_data_t *pgdat, struct scan_control *sc)
+{
+	unsigned long file;
+	struct lruvec *target_lruvec;
+
+	target_lruvec = mem_cgroup_lruvec(sc->target_mem_cgroup, pgdat);
+
+	/*
+	 * Determine the scan balance between anon and file LRUs.
+	 */
+	spin_lock_irq(&target_lruvec->lru_lock);
+	sc->anon_cost = target_lruvec->anon_cost;
+	sc->file_cost = target_lruvec->file_cost;
+	spin_unlock_irq(&target_lruvec->lru_lock);
+
+	/*
+	 * Target desirable inactive:active list ratios for the anon
+	 * and file LRU lists.
+	 */
+	if (!sc->force_deactivate) {
+		unsigned long refaults;
+
+		refaults = lruvec_page_state(target_lruvec,
+				WORKINGSET_ACTIVATE_ANON);
+		if (refaults != target_lruvec->refaults[0] ||
+			inactive_is_low(target_lruvec, LRU_INACTIVE_ANON))
+			sc->may_deactivate |= DEACTIVATE_ANON;
+		else
+			sc->may_deactivate &= ~DEACTIVATE_ANON;
+
+		/*
+		 * When refaults are being observed, it means a new
+		 * workingset is being established. Deactivate to get
+		 * rid of any stale active pages quickly.
+		 */
+		refaults = lruvec_page_state(target_lruvec,
+				WORKINGSET_ACTIVATE_FILE);
+		if (refaults != target_lruvec->refaults[1] ||
+		    inactive_is_low(target_lruvec, LRU_INACTIVE_FILE))
+			sc->may_deactivate |= DEACTIVATE_FILE;
+		else
+			sc->may_deactivate &= ~DEACTIVATE_FILE;
+	} else
+		sc->may_deactivate = DEACTIVATE_ANON | DEACTIVATE_FILE;
+
+	/*
+	 * If we have plenty of inactive file pages that aren't
+	 * thrashing, try to reclaim those first before touching
+	 * anonymous pages.
+	 */
+	file = lruvec_page_state(target_lruvec, NR_INACTIVE_FILE);
+	if (file >> sc->priority && !(sc->may_deactivate & DEACTIVATE_FILE))
+		sc->cache_trim_mode = 1;
+	else
+		sc->cache_trim_mode = 0;
+
+	/*
+	 * Prevent the reclaimer from falling into the cache trap: as
+	 * cache pages start out inactive, every cache fault will tip
+	 * the scan balance towards the file LRU.  And as the file LRU
+	 * shrinks, so does the window for rotation from references.
+	 * This means we have a runaway feedback loop where a tiny
+	 * thrashing file LRU becomes infinitely more attractive than
+	 * anon pages.  Try to detect this based on file LRU size.
+	 */
+	if (!cgroup_reclaim(sc)) {
+		unsigned long total_high_wmark = 0;
+		unsigned long free, anon;
+		int z;
+
+		free = sum_zone_node_page_state(pgdat->node_id, NR_FREE_PAGES);
+		file = node_page_state(pgdat, NR_ACTIVE_FILE) +
+			   node_page_state(pgdat, NR_INACTIVE_FILE);
+
+		for (z = 0; z < MAX_NR_ZONES; z++) {
+			struct zone *zone = &pgdat->node_zones[z];
+
+			if (!managed_zone(zone))
+				continue;
+
+			total_high_wmark += high_wmark_pages(zone);
+		}
+
+		/*
+		 * Consider anon: if that's low too, this isn't a
+		 * runaway file reclaim problem, but rather just
+		 * extreme pressure. Reclaim as per usual then.
+		 */
+		anon = node_page_state(pgdat, NR_INACTIVE_ANON);
+
+		sc->file_is_tiny =
+			file + free <= total_high_wmark &&
+			!(sc->may_deactivate & DEACTIVATE_ANON) &&
+			anon >> sc->priority;
+	}
+}
+
 /*
  * Determine how aggressively the anon and file LRU lists should be
  * scanned.  The relative value of each set of LRU lists is determined
@@ -2882,7 +2979,6 @@ static void shrink_node(pg_data_t *pgdat, struct scan_control *sc)
 	unsigned long nr_reclaimed, nr_scanned;
 	struct lruvec *target_lruvec;
 	bool reclaimable = false;
-	unsigned long file;
 
 	target_lruvec = mem_cgroup_lruvec(sc->target_mem_cgroup, pgdat);
 
@@ -2892,93 +2988,7 @@ static void shrink_node(pg_data_t *pgdat, struct scan_control *sc)
 	nr_reclaimed = sc->nr_reclaimed;
 	nr_scanned = sc->nr_scanned;
 
-	/*
-	 * Determine the scan balance between anon and file LRUs.
-	 */
-	spin_lock_irq(&target_lruvec->lru_lock);
-	sc->anon_cost = target_lruvec->anon_cost;
-	sc->file_cost = target_lruvec->file_cost;
-	spin_unlock_irq(&target_lruvec->lru_lock);
-
-	/*
-	 * Target desirable inactive:active list ratios for the anon
-	 * and file LRU lists.
-	 */
-	if (!sc->force_deactivate) {
-		unsigned long refaults;
-
-		refaults = lruvec_page_state(target_lruvec,
-				WORKINGSET_ACTIVATE_ANON);
-		if (refaults != target_lruvec->refaults[0] ||
-			inactive_is_low(target_lruvec, LRU_INACTIVE_ANON))
-			sc->may_deactivate |= DEACTIVATE_ANON;
-		else
-			sc->may_deactivate &= ~DEACTIVATE_ANON;
-
-		/*
-		 * When refaults are being observed, it means a new
-		 * workingset is being established. Deactivate to get
-		 * rid of any stale active pages quickly.
-		 */
-		refaults = lruvec_page_state(target_lruvec,
-				WORKINGSET_ACTIVATE_FILE);
-		if (refaults != target_lruvec->refaults[1] ||
-		    inactive_is_low(target_lruvec, LRU_INACTIVE_FILE))
-			sc->may_deactivate |= DEACTIVATE_FILE;
-		else
-			sc->may_deactivate &= ~DEACTIVATE_FILE;
-	} else
-		sc->may_deactivate = DEACTIVATE_ANON | DEACTIVATE_FILE;
-
-	/*
-	 * If we have plenty of inactive file pages that aren't
-	 * thrashing, try to reclaim those first before touching
-	 * anonymous pages.
-	 */
-	file = lruvec_page_state(target_lruvec, NR_INACTIVE_FILE);
-	if (file >> sc->priority && !(sc->may_deactivate & DEACTIVATE_FILE))
-		sc->cache_trim_mode = 1;
-	else
-		sc->cache_trim_mode = 0;
-
-	/*
-	 * Prevent the reclaimer from falling into the cache trap: as
-	 * cache pages start out inactive, every cache fault will tip
-	 * the scan balance towards the file LRU.  And as the file LRU
-	 * shrinks, so does the window for rotation from references.
-	 * This means we have a runaway feedback loop where a tiny
-	 * thrashing file LRU becomes infinitely more attractive than
-	 * anon pages.  Try to detect this based on file LRU size.
-	 */
-	if (!cgroup_reclaim(sc)) {
-		unsigned long total_high_wmark = 0;
-		unsigned long free, anon;
-		int z;
-
-		free = sum_zone_node_page_state(pgdat->node_id, NR_FREE_PAGES);
-		file = node_page_state(pgdat, NR_ACTIVE_FILE) +
-			   node_page_state(pgdat, NR_INACTIVE_FILE);
-
-		for (z = 0; z < MAX_NR_ZONES; z++) {
-			struct zone *zone = &pgdat->node_zones[z];
-			if (!managed_zone(zone))
-				continue;
-
-			total_high_wmark += high_wmark_pages(zone);
-		}
-
-		/*
-		 * Consider anon: if that's low too, this isn't a
-		 * runaway file reclaim problem, but rather just
-		 * extreme pressure. Reclaim as per usual then.
-		 */
-		anon = node_page_state(pgdat, NR_INACTIVE_ANON);
-
-		sc->file_is_tiny =
-			file + free <= total_high_wmark &&
-			!(sc->may_deactivate & DEACTIVATE_ANON) &&
-			anon >> sc->priority;
-	}
+	prepare_scan_count(pgdat, sc);
 
 	shrink_node_memcgs(pgdat, sc);
 
-- 
2.33.0.rc1.237.g0d66db33f3-goog


  parent reply	other threads:[~2021-08-18  6:31 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-18  6:30 [PATCH v4 00/11] Multigenerational LRU Framework Yu Zhao
2021-08-18  6:30 ` [PATCH v4 01/11] mm: x86, arm64: add arch_has_hw_pte_young() Yu Zhao
2021-08-19  9:19   ` Will Deacon
2021-08-19 21:23     ` Yu Zhao
2021-08-18  6:30 ` [PATCH v4 02/11] mm: x86: add CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG Yu Zhao
2021-08-18  6:30 ` Yu Zhao [this message]
2021-08-18  6:31 ` [PATCH v4 04/11] mm: multigenerational lru: groundwork Yu Zhao
2021-08-18  6:31 ` [PATCH v4 05/11] mm: multigenerational lru: protection Yu Zhao
2021-08-18  6:31 ` [PATCH v4 06/11] mm: multigenerational lru: mm_struct list Yu Zhao
2021-08-18  6:31 ` [PATCH v4 07/11] mm: multigenerational lru: aging Yu Zhao
2021-08-18  6:31 ` [PATCH v4 08/11] mm: multigenerational lru: eviction Yu Zhao
2021-08-18  6:31 ` [PATCH v4 09/11] mm: multigenerational lru: user interface Yu Zhao
2021-08-18  6:31 ` [PATCH v4 10/11] mm: multigenerational lru: Kconfig Yu Zhao
2021-08-18  6:31 ` [PATCH v4 11/11] mm: multigenerational lru: documentation Yu Zhao
2021-10-09  5:43 ` [PATCH v4 00/11] Multigenerational LRU Framework bot
2021-10-21 19:41 ` bot
2021-11-02  0:20 ` bot
2021-11-09  2:13 ` bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210818063107.2696454-4-yuzhao@google.com \
    --to=yuzhao@google.com \
    --cc=Hi-Angel@yandex.ru \
    --cc=hdanton@sina.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=page-reclaim@google.com \
    --subject='Re: [PATCH v4 03/11] mm/vmscan.c: refactor shrink_node()' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).