* [PATCH v2 0/1] asus-wmi: Add support for custom fan curves
@ 2021-08-19 1:17 Luke D. Jones
2021-08-19 1:17 ` [PATCH v2 1/1] " Luke D. Jones
0 siblings, 1 reply; 3+ messages in thread
From: Luke D. Jones @ 2021-08-19 1:17 UTC (permalink / raw)
To: linux-kernel; +Cc: hdegoede, hadess, platform-driver-x86, Luke D. Jones
Add support for custom fan curves found on some ASUS ROG laptops.
- V1
+ Initial patch work
- V2
+ Don't fail and remove wmi driver if error from
asus_wmi_evaluate_method_buf() if error is -ENODEV
Luke D. Jones (1):
asus-wmi: Add support for custom fan curves
drivers/platform/x86/asus-wmi.c | 498 +++++++++++++++++++++
include/linux/platform_data/x86/asus-wmi.h | 2 +
2 files changed, 500 insertions(+)
--
2.31.1
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH v2 1/1] asus-wmi: Add support for custom fan curves
2021-08-19 1:17 [PATCH v2 0/1] asus-wmi: Add support for custom fan curves Luke D. Jones
@ 2021-08-19 1:17 ` Luke D. Jones
2021-08-19 7:26 ` Luke Jones
0 siblings, 1 reply; 3+ messages in thread
From: Luke D. Jones @ 2021-08-19 1:17 UTC (permalink / raw)
To: linux-kernel; +Cc: hdegoede, hadess, platform-driver-x86, Luke D. Jones
Add support for custom fan curves found on some ASUS ROG laptops.
These laptops have the ability to set a custom curve for the CPU
and GPU fans via an ACPI method call. This patch enables this,
additionally enabling custom fan curves per-profile, where profile
here means each of the 3 levels of "throttle_thermal_policy".
Signed-off-by: Luke D. Jones <luke@ljones.dev>
---
drivers/platform/x86/asus-wmi.c | 498 +++++++++++++++++++++
include/linux/platform_data/x86/asus-wmi.h | 2 +
2 files changed, 500 insertions(+)
diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
index cc5811844012..dd107301cc1e 100644
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -122,6 +122,7 @@ struct bios_args {
u32 arg0;
u32 arg1;
u32 arg2; /* At least TUF Gaming series uses 3 dword input buffer. */
+ u32 arg3;
u32 arg4;
u32 arg5;
} __packed;
@@ -173,6 +174,12 @@ enum fan_type {
FAN_TYPE_SPEC83, /* starting in Spec 8.3, use CPU_FAN_CTRL */
};
+struct fan_curve {
+ char *balanced;
+ char *performance;
+ char *quiet;
+};
+
struct asus_wmi {
int dsts_id;
int spec;
@@ -220,6 +227,12 @@ struct asus_wmi {
bool throttle_thermal_policy_available;
u8 throttle_thermal_policy_mode;
+ bool cpu_fan_curve_available;
+ struct fan_curve cpu_fan_curve;
+
+ bool gpu_fan_curve_available;
+ struct fan_curve gpu_fan_curve;
+
struct platform_profile_handler platform_profile_handler;
bool platform_profile_support;
@@ -285,6 +298,90 @@ int asus_wmi_evaluate_method(u32 method_id, u32 arg0, u32 arg1, u32 *retval)
}
EXPORT_SYMBOL_GPL(asus_wmi_evaluate_method);
+static int asus_wmi_evaluate_method5(u32 method_id,
+ u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4, u32 *retval)
+{
+ struct bios_args args = {
+ .arg0 = arg0,
+ .arg1 = arg1,
+ .arg2 = arg2,
+ .arg3 = arg3,
+ .arg4 = arg4,
+ };
+ struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
+ struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
+ acpi_status status;
+ union acpi_object *obj;
+ u32 tmp = 0;
+
+ status = wmi_evaluate_method(ASUS_WMI_MGMT_GUID, 0, method_id,
+ &input, &output);
+
+ if (ACPI_FAILURE(status))
+ return -EIO;
+
+ obj = (union acpi_object *)output.pointer;
+ if (obj && obj->type == ACPI_TYPE_INTEGER)
+ tmp = (u32) obj->integer.value;
+
+ if (retval)
+ *retval = tmp;
+
+ kfree(obj);
+
+ if (tmp == ASUS_WMI_UNSUPPORTED_METHOD)
+ return -ENODEV;
+
+ return 0;
+}
+
+/*
+ * Returns as an error if the method output is not a buffer. Typically this
+ * means that the method called is unsupported.
+*/
+static int asus_wmi_evaluate_method_buf(u32 method_id,
+ u32 arg0, u32 arg1, u8 **ret_buffer)
+{
+ struct bios_args args = {
+ .arg0 = arg0,
+ .arg1 = arg1,
+ .arg2 = 0,
+ };
+ struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
+ struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
+ acpi_status status;
+ union acpi_object *obj;
+ u8 *buf_tmp;
+ u32 int_tmp = 0;
+
+ status = wmi_evaluate_method(ASUS_WMI_MGMT_GUID, 0, method_id,
+ &input, &output);
+
+ if (ACPI_FAILURE(status))
+ return -EIO;
+
+ obj = (union acpi_object *)output.pointer;
+
+ if (obj && obj->type == ACPI_TYPE_INTEGER) {
+ int_tmp = (u32) obj->integer.value;
+ if (int_tmp == ASUS_WMI_UNSUPPORTED_METHOD)
+ return -ENODEV;
+
+ return int_tmp;
+ }
+
+ if (obj && obj->type == ACPI_TYPE_BUFFER) {
+ buf_tmp = obj->buffer.pointer;
+ }
+
+ if (ret_buffer)
+ ret_buffer = &buf_tmp;
+
+ kfree(obj);
+
+ return 0;
+}
+
static int asus_wmi_evaluate_method_agfn(const struct acpi_buffer args)
{
struct acpi_buffer input;
@@ -2043,6 +2140,311 @@ static ssize_t fan_boost_mode_store(struct device *dev,
// Fan boost mode: 0 - normal, 1 - overboost, 2 - silent
static DEVICE_ATTR_RW(fan_boost_mode);
+/* Custom fan curves per-profile **********************************************/
+
+static int custom_fan_check_present(struct asus_wmi *asus,
+ bool *available, u32 dev)
+{
+ u8 *buffer;
+ int err;
+
+ *available = false;
+
+ /*
+ * We don't do anything with the buffer from this call except ensure that
+ * it is a buffer. A fail or unsupported returns an int (from ACPI)
+ */
+ err = asus_wmi_evaluate_method_buf(asus->dsts_id, dev, 0, &buffer);
+ if (err) {
+ if (err == -ENODEV)
+ return 0;
+ return err;
+ }
+
+ err = asus_wmi_evaluate_method_buf(asus->dsts_id, dev, 1, &buffer);
+ if (err) {
+ if (err == -ENODEV)
+ return 0;
+ return err;
+ }
+
+ err = asus_wmi_evaluate_method_buf(asus->dsts_id, dev, 2, &buffer);
+ if (err) {
+ if (err == -ENODEV)
+ return 0;
+ return err;
+ }
+
+ *available = true;
+ return 0;
+}
+
+/*
+ * The expected input is of the format
+ * "30:1,49:2,59:3,69:4,79:31,89:49,99:56,109:58"
+ * where a pair is 30:1, with 30 = temperature, and 1 = percentage
+*/
+static int fan_curve_check_valid(const char *curve)
+{
+ char * buf, *set, *set_end, *pair_tmp, *pair, *pair_end;
+ int err, ret;
+
+ char *set_delimiter = ",";
+ char *pair_delimiter = ":";
+ bool pair_start = true;
+ u32 prev_percent = 0;
+ u32 prev_temp = 0;
+ u32 percent = 0;
+ u32 temp = 0;
+
+ buf = set_end = pair_end = kstrdup(curve, GFP_KERNEL);
+
+ while( (set = strsep(&set_end, set_delimiter)) != NULL ) {
+ pair_tmp = kstrdup(set, GFP_KERNEL);
+ pair_start = true;
+ while( (pair = strsep(&pair_tmp, pair_delimiter)) != NULL ) {
+ err = kstrtouint(pair, 10, &ret);
+ if (err) {
+ kfree(pair_tmp);
+ kfree(buf);
+ return err;
+ }
+
+ if (pair_start) {
+ temp = ret;
+ pair_start = false;
+ } else {
+ percent = ret;
+ }
+ }
+ kfree(pair_tmp);
+
+ if (temp < prev_temp || percent < prev_percent || percent > 100) {
+ pr_info("Fan curve invalid");
+ pr_info("A value is sequentially lower or percentage is > 100");
+ kfree(buf);
+ return -EINVAL;
+ }
+
+ prev_temp = temp;
+ prev_percent = percent;
+ }
+ kfree(buf);
+
+ return 0;
+}
+
+static int fan_curve_write(struct asus_wmi *asus, u32 dev, char *curve)
+{
+ char * buf, *set, *pair_tmp, *pair, *set_end, *pair_end;
+ int err, ret;
+
+ char *set_delimiter = ",";
+ char *pair_delimiter = ":";
+ bool half_complete = false;
+ bool pair_start = true;
+ u32 percent = 0;
+ u32 shift = 0;
+ u32 temp = 0;
+ u32 arg1 = 0;
+ u32 arg2 = 0;
+ u32 arg3 = 0;
+ u32 arg4 = 0;
+
+ buf = set_end = pair_end = kstrdup(curve, GFP_KERNEL);
+
+ while( (set = strsep(&set_end, set_delimiter)) != NULL ) {
+ pair_tmp = kstrdup(set, GFP_KERNEL);
+ pair_start = true;
+ while( (pair = strsep(&pair_tmp, pair_delimiter)) != NULL ) {
+ err = kstrtouint(pair, 10, &ret);
+ if (err) {
+ kfree(pair_tmp);
+ kfree(buf);
+ return err;
+ }
+
+ if (pair_start) {
+ temp = ret;
+ pair_start = false;
+ } else {
+ percent = ret;
+ }
+ }
+ kfree(pair_tmp);
+
+ if (!half_complete) {
+ arg1 += temp << shift;
+ arg3 += percent << shift;
+ } else {
+ arg2 += temp << shift;
+ arg4 += percent << shift;
+ }
+ shift += 8;
+
+ if (shift == 32) {
+ shift = 0;
+ half_complete = true;
+ }
+ }
+ kfree(buf);
+
+ return asus_wmi_evaluate_method5(ASUS_WMI_METHODID_DEVS, dev,
+ arg1, arg2, arg3, arg4, &ret);
+}
+
+static ssize_t fan_curve_store(struct asus_wmi *asus, const char *buf,
+ size_t count, u32 dev, char **curve,
+ u32 throttle_policy)
+{
+ int err;
+
+ /* Allow a user to write "" or " " to erase a curve setting */
+ if (strlen(buf) <= 1 || strcmp(buf, " \n") == 0) {
+ kfree(*curve);
+ *curve = NULL;
+ return count;
+ }
+
+ err = fan_curve_check_valid(buf);
+ if (err)
+ return err;
+
+ /* Always save fan curve if it is valid */
+ *curve = kstrdup(buf, GFP_KERNEL);
+
+ /* Maybe activate fan curve if in associated mode */
+ if (asus->throttle_thermal_policy_mode == throttle_policy) {
+ err = fan_curve_write(asus, dev, *curve);
+ if (err)
+ return err;
+ }
+
+ return count;
+}
+
+/*
+ * CPU Fan Curves
+*/
+
+static ssize_t cpu_fan_curve_balanced_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct asus_wmi *asus = dev_get_drvdata(dev);
+ return scnprintf(buf, PAGE_SIZE, "%s\n", asus->cpu_fan_curve.balanced);
+}
+
+static ssize_t cpu_fan_curve_balanced_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct asus_wmi *asus = dev_get_drvdata(dev);
+ return fan_curve_store(asus, buf, count, ASUS_WMI_DEVID_CPU_FAN_CURVE,
+ &asus->cpu_fan_curve.balanced,
+ ASUS_THROTTLE_THERMAL_POLICY_DEFAULT);
+}
+
+static DEVICE_ATTR_RW(cpu_fan_curve_balanced);
+
+static ssize_t cpu_fan_curve_performance_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct asus_wmi *asus = dev_get_drvdata(dev);
+ return scnprintf(buf, PAGE_SIZE, "%s\n", asus->cpu_fan_curve.performance);
+}
+
+static ssize_t cpu_fan_curve_performance_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct asus_wmi *asus = dev_get_drvdata(dev);
+ return fan_curve_store(asus, buf, count, ASUS_WMI_DEVID_CPU_FAN_CURVE,
+ &asus->cpu_fan_curve.performance,
+ ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST);
+}
+
+static DEVICE_ATTR_RW(cpu_fan_curve_performance);
+
+static ssize_t cpu_fan_curve_quiet_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct asus_wmi *asus = dev_get_drvdata(dev);
+ return scnprintf(buf, PAGE_SIZE, "%s\n", asus->cpu_fan_curve.quiet);
+}
+
+static ssize_t cpu_fan_curve_quiet_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct asus_wmi *asus = dev_get_drvdata(dev);
+ return fan_curve_store(asus, buf, count, ASUS_WMI_DEVID_CPU_FAN_CURVE,
+ &asus->cpu_fan_curve.quiet,
+ ASUS_THROTTLE_THERMAL_POLICY_SILENT);
+}
+
+static DEVICE_ATTR_RW(cpu_fan_curve_quiet);
+
+/*
+ * GPU Fan Curves
+*/
+
+static ssize_t gpu_fan_curve_balanced_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct asus_wmi *asus = dev_get_drvdata(dev);
+ return scnprintf(buf, PAGE_SIZE, "%s\n", asus->gpu_fan_curve.balanced);
+}
+
+static ssize_t gpu_fan_curve_balanced_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct asus_wmi *asus = dev_get_drvdata(dev);
+ return fan_curve_store(asus, buf, count, ASUS_WMI_DEVID_GPU_FAN_CURVE,
+ &asus->gpu_fan_curve.balanced,
+ ASUS_THROTTLE_THERMAL_POLICY_DEFAULT);
+}
+
+static DEVICE_ATTR_RW(gpu_fan_curve_balanced);
+
+static ssize_t gpu_fan_curve_performance_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct asus_wmi *asus = dev_get_drvdata(dev);
+ return scnprintf(buf, PAGE_SIZE, "%s\n", asus->gpu_fan_curve.performance);
+}
+
+static ssize_t gpu_fan_curve_performance_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct asus_wmi *asus = dev_get_drvdata(dev);
+ return fan_curve_store(asus, buf, count, ASUS_WMI_DEVID_GPU_FAN_CURVE,
+ &asus->gpu_fan_curve.performance,
+ ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST);
+}
+
+static DEVICE_ATTR_RW(gpu_fan_curve_performance);
+
+static ssize_t gpu_fan_curve_quiet_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct asus_wmi *asus = dev_get_drvdata(dev);
+ return scnprintf(buf, PAGE_SIZE, "%s\n", asus->gpu_fan_curve.quiet);
+}
+
+static ssize_t gpu_fan_curve_quiet_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct asus_wmi *asus = dev_get_drvdata(dev);
+ return fan_curve_store(asus, buf, count, ASUS_WMI_DEVID_GPU_FAN_CURVE,
+ &asus->gpu_fan_curve.quiet,
+ ASUS_THROTTLE_THERMAL_POLICY_SILENT);
+}
+
+static DEVICE_ATTR_RW(gpu_fan_curve_quiet);
+
/* Throttle thermal policy ****************************************************/
static int throttle_thermal_policy_check_present(struct asus_wmi *asus)
@@ -2067,6 +2469,53 @@ static int throttle_thermal_policy_check_present(struct asus_wmi *asus)
return 0;
}
+static int throttle_thermal_policy_write_cpu_curves(struct asus_wmi *asus)
+{
+ char *curve = NULL;
+ int err, mode;
+
+ mode = asus->throttle_thermal_policy_mode;
+
+ if (mode == ASUS_THROTTLE_THERMAL_POLICY_DEFAULT) {
+ curve = asus->cpu_fan_curve.balanced;
+ } else if (mode == ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST) {
+ curve = asus->cpu_fan_curve.performance;
+ } else if (mode == ASUS_THROTTLE_THERMAL_POLICY_SILENT) {
+ curve = asus->cpu_fan_curve.quiet;
+ }
+
+ if (curve != NULL) {
+ err = fan_curve_write(asus, ASUS_WMI_DEVID_CPU_FAN_CURVE, curve);
+ if (err)
+ return err;
+ }
+ return 0;
+}
+
+
+static int throttle_thermal_policy_write_gpu_curves(struct asus_wmi *asus)
+{
+ char *curve = NULL;
+ int err, mode;
+
+ mode = asus->throttle_thermal_policy_mode;
+
+ if (mode == ASUS_THROTTLE_THERMAL_POLICY_DEFAULT) {
+ curve = asus->gpu_fan_curve.balanced;
+ } else if (mode == ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST) {
+ curve = asus->gpu_fan_curve.performance;
+ } else if (mode == ASUS_THROTTLE_THERMAL_POLICY_SILENT) {
+ curve = asus->gpu_fan_curve.quiet;
+ }
+
+ if (curve != NULL) {
+ err = fan_curve_write(asus, ASUS_WMI_DEVID_GPU_FAN_CURVE, curve);
+ if (err)
+ return err;
+ }
+ return 0;
+}
+
static int throttle_thermal_policy_write(struct asus_wmi *asus)
{
int err;
@@ -2092,6 +2541,26 @@ static int throttle_thermal_policy_write(struct asus_wmi *asus)
return -EIO;
}
+ if (asus->cpu_fan_curve_available) {
+ err = throttle_thermal_policy_write_cpu_curves(asus);
+ if (err) {
+ dev_warn(&asus->platform_device->dev,
+ "Failed to set custom CPU curve for thermal policy: %d\n",
+ err);
+ return err;
+ }
+ }
+
+ if (asus->gpu_fan_curve_available) {
+ err = throttle_thermal_policy_write_gpu_curves(asus);
+ if (err) {
+ dev_warn(&asus->platform_device->dev,
+ "Failed to set custom GPU curve for thermal policy: %d\n",
+ err);
+ return err;
+ }
+ }
+
return 0;
}
@@ -2711,6 +3180,12 @@ static struct attribute *platform_attributes[] = {
&dev_attr_als_enable.attr,
&dev_attr_fan_boost_mode.attr,
&dev_attr_throttle_thermal_policy.attr,
+ &dev_attr_cpu_fan_curve_balanced.attr,
+ &dev_attr_cpu_fan_curve_performance.attr,
+ &dev_attr_cpu_fan_curve_quiet.attr,
+ &dev_attr_gpu_fan_curve_balanced.attr,
+ &dev_attr_gpu_fan_curve_performance.attr,
+ &dev_attr_gpu_fan_curve_quiet.attr,
&dev_attr_panel_od.attr,
NULL
};
@@ -2741,6 +3216,18 @@ static umode_t asus_sysfs_is_visible(struct kobject *kobj,
ok = asus->fan_boost_mode_available;
else if (attr == &dev_attr_throttle_thermal_policy.attr)
ok = asus->throttle_thermal_policy_available;
+ else if (attr == &dev_attr_cpu_fan_curve_balanced.attr)
+ ok = asus->cpu_fan_curve_available;
+ else if (attr == &dev_attr_cpu_fan_curve_performance.attr)
+ ok = asus->cpu_fan_curve_available;
+ else if (attr == &dev_attr_cpu_fan_curve_quiet.attr)
+ ok = asus->cpu_fan_curve_available;
+ else if (attr == &dev_attr_gpu_fan_curve_balanced.attr)
+ ok = asus->gpu_fan_curve_available;
+ else if (attr == &dev_attr_gpu_fan_curve_performance.attr)
+ ok = asus->gpu_fan_curve_available;
+ else if (attr == &dev_attr_gpu_fan_curve_quiet.attr)
+ ok = asus->gpu_fan_curve_available;
else if (attr == &dev_attr_panel_od.attr)
ok = asus->panel_overdrive_available;
@@ -3016,6 +3503,16 @@ static int asus_wmi_add(struct platform_device *pdev)
else
throttle_thermal_policy_set_default(asus);
+ err = custom_fan_check_present(asus, &asus->cpu_fan_curve_available,
+ ASUS_WMI_DEVID_CPU_FAN_CURVE);
+ if (err)
+ goto fail_throttle_fan_curve;
+
+ err = custom_fan_check_present(asus, &asus->gpu_fan_curve_available,
+ ASUS_WMI_DEVID_GPU_FAN_CURVE);
+ if (err)
+ goto fail_throttle_fan_curve;
+
err = platform_profile_setup(asus);
if (err)
goto fail_platform_profile_setup;
@@ -3109,6 +3606,7 @@ static int asus_wmi_add(struct platform_device *pdev)
asus_wmi_sysfs_exit(asus->platform_device);
fail_sysfs:
fail_throttle_thermal_policy:
+fail_throttle_fan_curve:
fail_platform_profile_setup:
if (asus->platform_profile_support)
platform_profile_remove();
diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h
index 17dc5cb6f3f2..a571b47ff362 100644
--- a/include/linux/platform_data/x86/asus-wmi.h
+++ b/include/linux/platform_data/x86/asus-wmi.h
@@ -77,6 +77,8 @@
#define ASUS_WMI_DEVID_THERMAL_CTRL 0x00110011
#define ASUS_WMI_DEVID_FAN_CTRL 0x00110012 /* deprecated */
#define ASUS_WMI_DEVID_CPU_FAN_CTRL 0x00110013
+#define ASUS_WMI_DEVID_CPU_FAN_CURVE 0x00110024
+#define ASUS_WMI_DEVID_GPU_FAN_CURVE 0x00110025
/* Power */
#define ASUS_WMI_DEVID_PROCESSOR_STATE 0x00120012
--
2.31.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v2 1/1] asus-wmi: Add support for custom fan curves
2021-08-19 1:17 ` [PATCH v2 1/1] " Luke D. Jones
@ 2021-08-19 7:26 ` Luke Jones
0 siblings, 0 replies; 3+ messages in thread
From: Luke Jones @ 2021-08-19 7:26 UTC (permalink / raw)
To: linux-kernel; +Cc: hdegoede, hadess, platform-driver-x86
Hi all,
This is the largest patch I've written so far I think, and there may be
mistakes. So far in testing it's been good though.
Feedback is absolutely welcomed. Some of my own comments are inline
here, and this version is a WIP - I expect we'll have a round or two of
changes.
Cheers
On Thu, Aug 19 2021 at 13:17:33 +1200, Luke D. Jones <luke@ljones.dev>
wrote:
> Add support for custom fan curves found on some ASUS ROG laptops.
>
> These laptops have the ability to set a custom curve for the CPU
> and GPU fans via an ACPI method call. This patch enables this,
> additionally enabling custom fan curves per-profile, where profile
> here means each of the 3 levels of "throttle_thermal_policy".
>
> Signed-off-by: Luke D. Jones <luke@ljones.dev>
> ---
> drivers/platform/x86/asus-wmi.c | 498
> +++++++++++++++++++++
> include/linux/platform_data/x86/asus-wmi.h | 2 +
> 2 files changed, 500 insertions(+)
>
> diff --git a/drivers/platform/x86/asus-wmi.c
> b/drivers/platform/x86/asus-wmi.c
> index cc5811844012..dd107301cc1e 100644
> --- a/drivers/platform/x86/asus-wmi.c
> +++ b/drivers/platform/x86/asus-wmi.c
> @@ -122,6 +122,7 @@ struct bios_args {
> u32 arg0;
> u32 arg1;
> u32 arg2; /* At least TUF Gaming series uses 3 dword input buffer.
> */
> + u32 arg3;
> u32 arg4;
> u32 arg5;
> } __packed;
> @@ -173,6 +174,12 @@ enum fan_type {
> FAN_TYPE_SPEC83, /* starting in Spec 8.3, use CPU_FAN_CTRL */
> };
>
> +struct fan_curve {
> + char *balanced;
> + char *performance;
> + char *quiet;
> +};
> +
> struct asus_wmi {
> int dsts_id;
> int spec;
> @@ -220,6 +227,12 @@ struct asus_wmi {
> bool throttle_thermal_policy_available;
> u8 throttle_thermal_policy_mode;
>
> + bool cpu_fan_curve_available;
> + struct fan_curve cpu_fan_curve;
> +
> + bool gpu_fan_curve_available;
> + struct fan_curve gpu_fan_curve;
> +
> struct platform_profile_handler platform_profile_handler;
> bool platform_profile_support;
>
> @@ -285,6 +298,90 @@ int asus_wmi_evaluate_method(u32 method_id, u32
> arg0, u32 arg1, u32 *retval)
> }
> EXPORT_SYMBOL_GPL(asus_wmi_evaluate_method);
>
> +static int asus_wmi_evaluate_method5(u32 method_id,
> + u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4, u32 *retval)
> +{
> + struct bios_args args = {
> + .arg0 = arg0,
> + .arg1 = arg1,
> + .arg2 = arg2,
> + .arg3 = arg3,
> + .arg4 = arg4,
> + };
> + struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
> + struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
> + acpi_status status;
> + union acpi_object *obj;
> + u32 tmp = 0;
> +
> + status = wmi_evaluate_method(ASUS_WMI_MGMT_GUID, 0, method_id,
> + &input, &output);
> +
> + if (ACPI_FAILURE(status))
> + return -EIO;
> +
> + obj = (union acpi_object *)output.pointer;
> + if (obj && obj->type == ACPI_TYPE_INTEGER)
> + tmp = (u32) obj->integer.value;
> +
> + if (retval)
> + *retval = tmp;
> +
> + kfree(obj);
> +
> + if (tmp == ASUS_WMI_UNSUPPORTED_METHOD)
> + return -ENODEV;
> +
> + return 0;
> +}
> +
> +/*
> + * Returns as an error if the method output is not a buffer.
> Typically this
> + * means that the method called is unsupported.
> +*/
> +static int asus_wmi_evaluate_method_buf(u32 method_id,
> + u32 arg0, u32 arg1, u8 **ret_buffer)
> +{
> + struct bios_args args = {
> + .arg0 = arg0,
> + .arg1 = arg1,
> + .arg2 = 0,
> + };
> + struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
> + struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
> + acpi_status status;
> + union acpi_object *obj;
> + u8 *buf_tmp;
> + u32 int_tmp = 0;
> +
> + status = wmi_evaluate_method(ASUS_WMI_MGMT_GUID, 0, method_id,
> + &input, &output);
> +
> + if (ACPI_FAILURE(status))
> + return -EIO;
> +
> + obj = (union acpi_object *)output.pointer;
> +
> + if (obj && obj->type == ACPI_TYPE_INTEGER) {
> + int_tmp = (u32) obj->integer.value;
> + if (int_tmp == ASUS_WMI_UNSUPPORTED_METHOD)
> + return -ENODEV;
> +
> + return int_tmp;
> + }
> +
> + if (obj && obj->type == ACPI_TYPE_BUFFER) {
> + buf_tmp = obj->buffer.pointer;
> + }
> +
> + if (ret_buffer)
> + ret_buffer = &buf_tmp;
> +
> + kfree(obj);
> +
> + return 0;
> +}
> +
> static int asus_wmi_evaluate_method_agfn(const struct acpi_buffer
> args)
> {
> struct acpi_buffer input;
> @@ -2043,6 +2140,311 @@ static ssize_t fan_boost_mode_store(struct
> device *dev,
> // Fan boost mode: 0 - normal, 1 - overboost, 2 - silent
> static DEVICE_ATTR_RW(fan_boost_mode);
>
> +/* Custom fan curves per-profile
> **********************************************/
> +
> +static int custom_fan_check_present(struct asus_wmi *asus,
> + bool *available, u32 dev)
> +{
> + u8 *buffer;
> + int err;
> +
> + *available = false;
> +
> + /*
> + * We don't do anything with the buffer from this call except
> ensure that
> + * it is a buffer. A fail or unsupported returns an int (from ACPI)
> + */
Discovering the buffer content is underway. It looks as if the format
is the same as what we write to the ACPI method (should have been
obvious :| )
> + err = asus_wmi_evaluate_method_buf(asus->dsts_id, dev, 0, &buffer);
> + if (err) {
> + if (err == -ENODEV)
> + return 0;
> + return err;
> + }
> +
> + err = asus_wmi_evaluate_method_buf(asus->dsts_id, dev, 1, &buffer);
> + if (err) {
> + if (err == -ENODEV)
> + return 0;
> + return err;
> + }
> +
> + err = asus_wmi_evaluate_method_buf(asus->dsts_id, dev, 2, &buffer);
> + if (err) {
> + if (err == -ENODEV)
> + return 0;
> + return err;
> + }
> +
> + *available = true;
> + return 0;
> +}
> +
> +/*
> + * The expected input is of the format
> + * "30:1,49:2,59:3,69:4,79:31,89:49,99:56,109:58"
> + * where a pair is 30:1, with 30 = temperature, and 1 = percentage
> +*/
> +static int fan_curve_check_valid(const char *curve)
> +{
> + char * buf, *set, *set_end, *pair_tmp, *pair, *pair_end;
> + int err, ret;
> +
> + char *set_delimiter = ",";
> + char *pair_delimiter = ":";
> + bool pair_start = true;
> + u32 prev_percent = 0;
> + u32 prev_temp = 0;
> + u32 percent = 0;
> + u32 temp = 0;
> +
> + buf = set_end = pair_end = kstrdup(curve, GFP_KERNEL);
> +
> + while( (set = strsep(&set_end, set_delimiter)) != NULL ) {
> + pair_tmp = kstrdup(set, GFP_KERNEL);
> + pair_start = true;
> + while( (pair = strsep(&pair_tmp, pair_delimiter)) != NULL ) {
> + err = kstrtouint(pair, 10, &ret);
> + if (err) {
> + kfree(pair_tmp);
> + kfree(buf);
> + return err;
> + }
> +
> + if (pair_start) {
> + temp = ret;
> + pair_start = false;
> + } else {
> + percent = ret;
> + }
> + }
> + kfree(pair_tmp);
> +
> + if (temp < prev_temp || percent < prev_percent || percent >
> 100) {
> + pr_info("Fan curve invalid");
> + pr_info("A value is sequentially lower or percentage is > 100");
> + kfree(buf);
> + return -EINVAL;
> + }
> +
> + prev_temp = temp;
> + prev_percent = percent;
> + }
> + kfree(buf);
> +
> + return 0;
> +}
> +
> +static int fan_curve_write(struct asus_wmi *asus, u32 dev, char
> *curve)
> +{
> + char * buf, *set, *pair_tmp, *pair, *set_end, *pair_end;
> + int err, ret;
> +
> + char *set_delimiter = ",";
> + char *pair_delimiter = ":";
> + bool half_complete = false;
> + bool pair_start = true;
> + u32 percent = 0;
> + u32 shift = 0;
> + u32 temp = 0;
> + u32 arg1 = 0;
> + u32 arg2 = 0;
> + u32 arg3 = 0;
> + u32 arg4 = 0;
> +
> + buf = set_end = pair_end = kstrdup(curve, GFP_KERNEL);
> +
> + while( (set = strsep(&set_end, set_delimiter)) != NULL ) {
> + pair_tmp = kstrdup(set, GFP_KERNEL);
> + pair_start = true;
> + while( (pair = strsep(&pair_tmp, pair_delimiter)) != NULL ) {
> + err = kstrtouint(pair, 10, &ret);
> + if (err) {
> + kfree(pair_tmp);
> + kfree(buf);
> + return err;
> + }
> +
> + if (pair_start) {
> + temp = ret;
> + pair_start = false;
> + } else {
> + percent = ret;
> + }
> + }
> + kfree(pair_tmp);
> +
> + if (!half_complete) {
> + arg1 += temp << shift;
> + arg3 += percent << shift;
> + } else {
> + arg2 += temp << shift;
> + arg4 += percent << shift;
> + }
> + shift += 8;
> +
> + if (shift == 32) {
> + shift = 0;
> + half_complete = true;
> + }
> + }
> + kfree(buf);
> +
> + return asus_wmi_evaluate_method5(ASUS_WMI_METHODID_DEVS, dev,
> + arg1, arg2, arg3, arg4, &ret);
> +}
> +
> +static ssize_t fan_curve_store(struct asus_wmi *asus, const char
> *buf,
> + size_t count, u32 dev, char **curve,
> + u32 throttle_policy)
> +{
> + int err;
> +
> + /* Allow a user to write "" or " " to erase a curve setting */
> + if (strlen(buf) <= 1 || strcmp(buf, " \n") == 0) {
> + kfree(*curve);
> + *curve = NULL;
I'll be adding a call to throttle_thermal_policy_write() here to ensure
the EC resets the fan defaults for the current mode.
> >
> ---
> drivers/platform/x86/asus-wmi.c | 498
> +++++++++++++++++++++
> include/linux/platform_data/x86/asus-wmi.h | 2 +
> 2 files changed, 500 insertions(+)
>
> diff --git a/drivers/platform/x86/asus-wmi.c
> b/drivers/platform/x86/asus-wmi.c
> index cc5811844012..dd107301cc1e 100644
> --- a/drivers/platform/x86/asus-wmi.c
> +++ b/drivers/platform/x86/asus-wmi.c
> @@ -122,6 +122,7 @@ struct bios_args {
> u32 arg0;
> u32 arg1;
> u32 arg2; /* At least TUF Gaming series uses 3 dword input buffer.
> */
> + u32 arg3;
> u32 arg4;
> u32 arg5;
> } __packed;
> @@ -173,6 +174,12 @@ enum fan_type {
> FAN_TYPE_SPEC83, /* starting in Spec 8.3, use CPU_FAN_CTRL */
> };
>
> +struct fan_curve {
> + char *balanced;
> + char *performance;
> + char *quiet;
> +};
> +
> struct asus_wmi {
> int dsts_id;
> int spec;
> @@ -220,6 +227,12 @@ struct asus_wmi {
> bool throttle_thermal_policy_available;
> u8 throttle_thermal_policy_mode;
>
> + bool cpu_fan_curve_available;
> + struct fan_curve cpu_fan_curve;
> +
> + bool gpu_fan_curve_available;
> + struct fan_curve gpu_fan_curve;
> +
> struct platform_profile_handler platform_profile_handler;
> bool platform_profile_support;
>
> @@ -285,6 +298,90 @@ int asus_wmi_evaluate_method(u32 method_id, u32
> arg0, u32 arg1, u32 *retval)
> }
> EXPORT_SYMBOL_GPL(asus_wmi_evaluate_method);
>
> +static int asus_wmi_evaluate_method5(u32 method_id,
> + u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4, u32 *retval)
> +{
> + struct bios_args args = {
> + .arg0 = arg0,
> + .arg1 = arg1,
> + .arg2 = arg2,
> + .arg3 = arg3,
> + .arg4 = arg4,
> + };
> + struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
> + struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
> + acpi_status status;
> + union acpi_object *obj;
> + u32 tmp = 0;
> +
> + status = wmi_evaluate_method(ASUS_WMI_MGMT_GUID, 0, method_id,
> + &input, &output);
> +
> + if (ACPI_FAILURE(status))
> + return -EIO;
> +
> + obj = (union acpi_object *)output.pointer;
> + if (obj && obj->type == ACPI_TYPE_INTEGER)
> + tmp = (u32) obj->integer.value;
> +
> + if (retval)
> + *retval = tmp;
> +
> + kfree(obj);
> +
> + if (tmp == ASUS_WMI_UNSUPPORTED_METHOD)
> + return -ENODEV;
> +
> + return 0;
> +}
> +
> +/*
> + * Returns as an error if the method output is not a buffer.
> Typically this
> + * means that the method called is unsupported.
> +*/
> +static int asus_wmi_evaluate_method_buf(u32 method_id,
> + u32 arg0, u32 arg1, u8 **ret_buffer)
> +{
> + struct bios_args args = {
> + .arg0 = arg0,
> + .arg1 = arg1,
> + .arg2 = 0,
> + };
> + struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
> + struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
> + acpi_status status;
> + union acpi_object *obj;
> + u8 *buf_tmp;
> + u32 int_tmp = 0;
> +
> + status = wmi_evaluate_method(ASUS_WMI_MGMT_GUID, 0, method_id,
> + &input, &output);
> +
> + if (ACPI_FAILURE(status))
> + return -EIO;
> +
> + obj = (union acpi_object *)output.pointer;
> +
> + if (obj && obj->type == ACPI_TYPE_INTEGER) {
> + int_tmp = (u32) obj->integer.value;
> + if (int_tmp == ASUS_WMI_UNSUPPORTED_METHOD)
> + return -ENODEV;
> +
> + return int_tmp;
> + }
> +
> + if (obj && obj->type == ACPI_TYPE_BUFFER) {
> + buf_tmp = obj->buffer.pointer;
> + }
> +
> + if (ret_buffer)
> + ret_buffer = &buf_tmp;
> +
> + kfree(obj);
> +
> + return 0;
> +}
> +
> static int asus_wmi_evaluate_method_agfn(const struct acpi_buffer
> args)
> {
> struct acpi_buffer input;
> @@ -2043,6 +2140,311 @@ static ssize_t fan_boost_mode_store(struct
> device *dev,
> // Fan boost mode: 0 - normal, 1 - overboost, 2 - silent
> static DEVICE_ATTR_RW(fan_boost_mode);
>
> +/* Custom fan curves per-profile
> **********************************************/
> +
> +static int custom_fan_check_present(struct asus_wmi *asus,
> + bool *available, u32 dev)
> +{
> + u8 *buffer;
> + int err;
> +
> + *available = false;
> +
> + /*
> + * We don't do anything with the buffer from this call except
> ensure that
> + * it is a buffer. A fail or unsupported returns an int (from ACPI)
> + */
> + err = asus_wmi_evaluate_method_buf(asus->dsts_id, dev, 0, &buffer);
> + if (err) {
> + if (err == -ENODEV)
> + return 0;
> + return err;
> + }
> +
> + err = asus_wmi_evaluate_method_buf(asus->dsts_id, dev, 1, &buffer);
> + if (err) {
> + if (err == -ENODEV)
> + return 0;
> + return err;
> + }
> +
> + err = asus_wmi_evaluate_method_buf(asus->dsts_id, dev, 2, &buffer);
> + if (err) {
> + if (err == -ENODEV)
> + return 0;
> + return err;
> + }
> +
> + *available = true;
> + return 0;
> +}
> +
> +/*
> + * The expected input is of the format
> + * "30:1,49:2,59:3,69:4,79:31,89:49,99:56,109:58"
> + * where a pair is 30:1, with 30 = temperature, and 1 = percentage
> +*/
> +static int fan_curve_check_valid(const char *curve)
> +{
> + char * buf, *set, *set_end, *pair_tmp, *pair, *pair_end;
> + int err, ret;
> +
> + char *set_delimiter = ",";
> + char *pair_delimiter = ":";
> + bool pair_start = true;
> + u32 prev_percent = 0;
> + u32 prev_temp = 0;
> + u32 percent = 0;
> + u32 temp = 0;
> +
> + buf = set_end = pair_end = kstrdup(curve, GFP_KERNEL);
> +
> + while( (set = strsep(&set_end, set_delimiter)) != NULL ) {
> + pair_tmp = kstrdup(set, GFP_KERNEL);
> + pair_start = true;
> + while( (pair = strsep(&pair_tmp, pair_delimiter)) != NULL ) {
> + err = kstrtouint(pair, 10, &ret);
> + if (err) {
> + kfree(pair_tmp);
> + kfree(buf);
> + return err;
> + }
> +
> + if (pair_start) {
> + temp = ret;
> + pair_start = false;
> + } else {
> + percent = ret;
> + }
> + }
> + kfree(pair_tmp);
> +
> + if (temp < prev_temp || percent < prev_percent || percent >
> 100) {
> + pr_info("Fan curve invalid");
> + pr_info("A value is sequentially lower or percentage is > 100");
> + kfree(buf);
> + return -EINVAL;
> + }
> +
> + prev_temp = temp;
> + prev_percent = percent;
> + }
> + kfree(buf);
> +
> + return 0;
> +}
> +
> +static int fan_curve_write(struct asus_wmi *asus, u32 dev, char
> *curve)
> +{
> + char * buf, *set, *pair_tmp, *pair, *set_end, *pair_end;
> + int err, ret;
> +
> + char *set_delimiter = ",";
> + char *pair_delimiter = ":";
> + bool half_complete = false;
> + bool pair_start = true;
> + u32 percent = 0;
> + u32 shift = 0;
> + u32 temp = 0;
> + u32 arg1 = 0;
> + u32 arg2 = 0;
> + u32 arg3 = 0;
> + u32 arg4 = 0;
> +
> + buf = set_end = pair_end = kstrdup(curve, GFP_KERNEL);
> +
> + while( (set = strsep(&set_end, set_delimiter)) != NULL ) {
> + pair_tmp = kstrdup(set, GFP_KERNEL);
> + pair_start = true;
> + while( (pair = strsep(&pair_tmp, pair_delimiter)) != NULL ) {
> + err = kstrtouint(pair, 10, &ret);
> + if (err) {
> + kfree(pair_tmp);
> + kfree(buf);
> + return err;
> + }
> +
> + if (pair_start) {
> + temp = ret;
> + pair_start = false;
> + } else {
> + percent = ret;
> + }
> + }
> + kfree(pair_tmp);
> +
> + if (!half_complete) {
> + arg1 += temp << shift;
> + arg3 += percent << shift;
> + } else {
> + arg2 += temp << shift;
> + arg4 += percent << shift;
> + }
> + shift += 8;
> +
> + if (shift == 32) {
> + shift = 0;
> + half_complete = true;
> + }
> + }
> + kfree(buf);
> +
> + return asus_wmi_evaluate_method5(ASUS_WMI_METHODID_DEVS, dev,
> + arg1, arg2, arg3, arg4, &ret);
> +}
> +
> +static ssize_t fan_curve_store(struct asus_wmi *asus, const char
> *buf,
> + size_t count, u32 dev, char **curve,
> + u32 throttle_policy)
> +{
> + int err;
> +
> + /* Allow a user to write "" or " " to erase a curve setting */
> + if (strlen(buf) <= 1 || strcmp(buf, " \n") == 0) {
> + kfree(*curve);
> + *curve = NULL;
> + return count;
> + }
> if (attr == &dev_attr_cpu_fan_curve_performance.attr)
> + ok = asus->cpu_fan_curve_available;
> + else if (attr == &dev_attr_cpu_fan_curve_quiet.attr)
> + ok = asus->cpu_fan_curve_available;
> + else if (attr == &dev_attr_gpu_fan_curve_balanced.attr)
> + ok = asus->gpu_fan_curve_available;
> + else if (attr == &dev_attr_gpu_fan_curve_performance.attr)
> + ok = asus->gpu_fan_curve_available;
> + else if (attr == &dev_attr_gpu_fan_curve_quiet.attr)
> + ok = asus->gpu_fan_curve_available;
> else if (attr == &dev_attr_panel_od.attr)
> ok = asus->panel_overdrive_available;
>
> @@ -3016,6 +3503,16 @@ static int asus_wmi_add(struct platform_device
> *pdev)
> else
> throttle_thermal_policy_set_default(asus);
>
> + err = custom_fan_check_present(asus, &asus->cpu_fan_curve_available,
> + ASUS_WMI_DEVID_CPU_FAN_CURVE);
> + if (err)
> + goto fail_throttle_fan_curve;
> +
> + err = custom_fan_check_present(asus,
> &asus->gpu_fan_curve_available,
> + ASUS_WMI_DEVID_GPU_FAN_CURVE);
> + if (err)
> + goto fail_throttle_fan_curve;
> +
> err = platform_profile_setup(asus);
> if (err)
> goto fail_platform_profile_setup;
> @@ -3109,6 +3606,7 @@ static int asus_wmi_add(struct platform_device
> *pdev)
> asus_wmi_sysfs_exit(asus->platform_device);
> fail_sysfs:
> fail_throttle_thermal_policy:
> +fail_throttle_fan_curve:
> fail_platform_profile_setup:
> if (asus->platform_profile_support)
> platform_profile_remove();
> diff --git a/include/linux/platform_data/x86/asus-wmi.h
> b/include/linux/platform_data/x86/asus-wmi.h
> index 17dc5cb6f3f2..a571b47ff362 100644
> --- a/include/linux/platform_data/x86/asus-wmi.h
> +++ b/include/linux/platform_data/x86/asus-wmi.h
> @@ -77,6 +77,8 @@
> #define ASUS_WMI_DEVID_THERMAL_CTRL 0x00110011
> #define ASUS_WMI_DEVID_FAN_CTRL 0x00110012 /* deprecated */
> #define ASUS_WMI_DEVID_CPU_FAN_CTRL 0x00110013
> +#define ASUS_WMI_DEVID_CPU_FAN_CURVE 0x00110024
> +#define ASUS_WMI_DEVID_GPU_FAN_CURVE 0x00110025
>
> /* Power */
> #define ASUS_WMI_DEVID_PROCESSOR_STATE 0x00120012
> --
> 2.31.1
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-08-19 7:27 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-19 1:17 [PATCH v2 0/1] asus-wmi: Add support for custom fan curves Luke D. Jones
2021-08-19 1:17 ` [PATCH v2 1/1] " Luke D. Jones
2021-08-19 7:26 ` Luke Jones
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).