linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] tty: serial: fsl_lpuart: enable two stop bits for lpuart32
@ 2021-08-23  8:17 Sherry Sun
  0 siblings, 0 replies; only message in thread
From: Sherry Sun @ 2021-08-23  8:17 UTC (permalink / raw)
  To: gregkh, jirislaby; +Cc: linux-serial, linux-kernel, linux-imx

From: Fugang Duan <fugang.duan@nxp.com>

Add two stop bits support.
User can run the command to enable two stop bits for test:
stty  cstopb  -F /dev/ttyLPx

Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
---
 drivers/tty/serial/fsl_lpuart.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 117e011aff5f..55097e068908 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -2049,11 +2049,12 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
 {
 	struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
 	unsigned long flags;
-	unsigned long ctrl, old_ctrl, modem;
+	unsigned long ctrl, old_ctrl, bd, modem;
 	unsigned int  baud;
 	unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
 
 	ctrl = old_ctrl = lpuart32_read(&sport->port, UARTCTRL);
+	bd = lpuart32_read(&sport->port, UARTBAUD);
 	modem = lpuart32_read(&sport->port, UARTMODIR);
 	/*
 	 * only support CS8 and CS7, and for CS7 must enable PE.
@@ -2097,7 +2098,9 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
 	}
 
 	if (termios->c_cflag & CSTOPB)
-		termios->c_cflag &= ~CSTOPB;
+		bd |= UARTBAUD_SBNS;
+	else
+		bd &= ~UARTBAUD_SBNS;
 
 	/* parity must be enabled when CS7 to match 8-bits format */
 	if ((termios->c_cflag & CSIZE) == CS7)
@@ -2167,6 +2170,7 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
 	lpuart32_write(&sport->port, old_ctrl & ~(UARTCTRL_TE | UARTCTRL_RE),
 		       UARTCTRL);
 
+	lpuart32_write(&sport->port, bd, UARTBAUD);
 	lpuart32_serial_setbrg(sport, baud);
 	lpuart32_write(&sport->port, modem, UARTMODIR);
 	lpuart32_write(&sport->port, ctrl, UARTCTRL);
-- 
2.17.1


^ permalink raw reply related	[flat|nested] only message in thread

only message in thread, other threads:[~2021-08-23  8:19 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-23  8:17 [PATCH] tty: serial: fsl_lpuart: enable two stop bits for lpuart32 Sherry Sun

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).