[PATCH v4] mmc: core: Return correct emmc response in case of ioctl error

[PATCH v4] mmc: core: Return correct emmc response in case of ioctl error

[Nishad Kamdar]

When a read/write command is sent via ioctl to the kernel,
and the command fails, the actual error response of the emmc
is not sent to the user.

IOCTL read/write tests are carried out using commands
17 (Single BLock Read), 24 (Single Block Write),
18 (Multi Block Read), 25 (Multi Block Write)

The tests are carried out on a 64Gb emmc device. All of these
tests try to access an "out of range" sector address (0x09B2FFFF).

It is seen that without the patch the response received by the user
is not OUT_OF_RANGE error (R1 response 31st bit is not set) as per
JEDEC specification. After applying the patch proper response is seen.
This is because the function returns without copying the response to
the user in case of failure. This patch fixes the issue.

Hence, this memcpy is required whether we get an error response or not.
Therefor it is moved up from the current position up to immediately
after we have called mmc_wait_for_req().

The test code and the output of only the CMD17 is included in the
commit to limit the message length.

CMD17 (Test Code Snippet):
==========================
        printf("Forming CMD%d\n", opt_idx);
        /*  single block read */
        cmd.blksz = 512;
        cmd.blocks = 1;
        cmd.write_flag = 0;
        cmd.opcode = 17;
        //cmd.arg = atoi(argv[3]);
        cmd.arg = 0x09B2FFFF;
        /* Expecting response R1B */
        cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;

        memset(data, 0, sizeof(__u8) * 512);
        mmc_ioc_cmd_set_data(cmd, data);

        printf("Sending CMD%d: ARG[0x%08x]\n", opt_idx, cmd.arg);
        if(ioctl(fd, MMC_IOC_CMD, &cmd))
                perror("Error");

        printf("\nResponse: %08x\n", cmd.response[0]);

CMD17 (Output without patch):
=============================
test@test-LIVA-Z:~$ sudo ./mmc cmd_test /dev/mmcblk0 17
Entering the do_mmc_commands:Device: /dev/mmcblk0 nargs:4
Entering the do_mmc_commands:Device: /dev/mmcblk0 options[17, 0x09B2FFF]
Forming CMD17
Sending CMD17: ARG[0x09b2ffff]
Error: Connection timed out

Response: 00000000
(Incorrect response)

CMD17 (Output with patch):
==========================
test@test-LIVA-Z:~$ sudo ./mmc cmd_test /dev/mmcblk0 17
[sudo] password for test:
Entering the do_mmc_commands:Device: /dev/mmcblk0 nargs:4
Entering the do_mmc_commands:Device: /dev/mmcblk0 options[17, 09B2FFFF]
Forming CMD17
Sending CMD17: ARG[0x09b2ffff]
Error: Connection timed out

Response: 80000900
(Correct OUT_OF_ERROR response as per JEDEC specification)

Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
---
Changes in v4:
  - Moved the existing 
    "memcpy(&(idata->ic.response), cmd.resp, sizeof(cmd.resp));"
    from a couple of lines further down in the code, up to 
    immediately after we have called mmc_wait_for_req().
  - Modified the commit message to explain this change
Changes in v3:
  - Shorten the commit message to include only CMD17 related
    code and test.
Changes in v2:
  - Make commit message clearer by adding test cases as outputs.

 drivers/mmc/core/block.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index 672cc505ce378..94bb8b4cd6a4e 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -557,6 +557,7 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
 		return mmc_sanitize(card, idata->ic.cmd_timeout_ms);
 
 	mmc_wait_for_req(card->host, &mrq);
+	memcpy(&idata->ic.response, cmd.resp, sizeof(cmd.resp));
 
 	if (cmd.error) {
 		dev_err(mmc_dev(card->host), "%s: cmd error %d\n",
@@ -606,8 +607,6 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
 	if (idata->ic.postsleep_min_us)
 		usleep_range(idata->ic.postsleep_min_us, idata->ic.postsleep_max_us);
 
-	memcpy(&(idata->ic.response), cmd.resp, sizeof(cmd.resp));
-
 	if (idata->rpmb || (cmd.flags & MMC_RSP_R1B) == MMC_RSP_R1B) {
 		/*
 		 * Ensure RPMB/R1B command has completed by polling CMD13
-- 
2.17.1

Re: [PATCH v4] mmc: core: Return correct emmc response in case of ioctl error

[Ulf Hansson]

On Tue, 24 Aug 2021 at 21:17, Nishad Kamdar <nishadkamdar@gmail.com> wrote:
>
> When a read/write command is sent via ioctl to the kernel,
> and the command fails, the actual error response of the emmc
> is not sent to the user.
>
> IOCTL read/write tests are carried out using commands
> 17 (Single BLock Read), 24 (Single Block Write),
> 18 (Multi Block Read), 25 (Multi Block Write)
>
> The tests are carried out on a 64Gb emmc device. All of these
> tests try to access an "out of range" sector address (0x09B2FFFF).
>
> It is seen that without the patch the response received by the user
> is not OUT_OF_RANGE error (R1 response 31st bit is not set) as per
> JEDEC specification. After applying the patch proper response is seen.
> This is because the function returns without copying the response to
> the user in case of failure. This patch fixes the issue.
>
> Hence, this memcpy is required whether we get an error response or not.
> Therefor it is moved up from the current position up to immediately
> after we have called mmc_wait_for_req().
>
> The test code and the output of only the CMD17 is included in the
> commit to limit the message length.
>
> CMD17 (Test Code Snippet):
> ==========================
>         printf("Forming CMD%d\n", opt_idx);
>         /*  single block read */
>         cmd.blksz = 512;
>         cmd.blocks = 1;
>         cmd.write_flag = 0;
>         cmd.opcode = 17;
>         //cmd.arg = atoi(argv[3]);
>         cmd.arg = 0x09B2FFFF;
>         /* Expecting response R1B */
>         cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
>
>         memset(data, 0, sizeof(__u8) * 512);
>         mmc_ioc_cmd_set_data(cmd, data);
>
>         printf("Sending CMD%d: ARG[0x%08x]\n", opt_idx, cmd.arg);
>         if(ioctl(fd, MMC_IOC_CMD, &cmd))
>                 perror("Error");
>
>         printf("\nResponse: %08x\n", cmd.response[0]);
>
> CMD17 (Output without patch):
> =============================
> test@test-LIVA-Z:~$ sudo ./mmc cmd_test /dev/mmcblk0 17
> Entering the do_mmc_commands:Device: /dev/mmcblk0 nargs:4
> Entering the do_mmc_commands:Device: /dev/mmcblk0 options[17, 0x09B2FFF]
> Forming CMD17
> Sending CMD17: ARG[0x09b2ffff]
> Error: Connection timed out
>
> Response: 00000000
> (Incorrect response)
>
> CMD17 (Output with patch):
> ==========================
> test@test-LIVA-Z:~$ sudo ./mmc cmd_test /dev/mmcblk0 17
> [sudo] password for test:
> Entering the do_mmc_commands:Device: /dev/mmcblk0 nargs:4
> Entering the do_mmc_commands:Device: /dev/mmcblk0 options[17, 09B2FFFF]
> Forming CMD17
> Sending CMD17: ARG[0x09b2ffff]
> Error: Connection timed out
>
> Response: 80000900
> (Correct OUT_OF_ERROR response as per JEDEC specification)
>
> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
> Reviewed-by: Avri Altman <avri.altman@wdc.com>

Applied for next, thanks!

Kind regards
Uffe


> ---
> Changes in v4:
>   - Moved the existing
>     "memcpy(&(idata->ic.response), cmd.resp, sizeof(cmd.resp));"
>     from a couple of lines further down in the code, up to
>     immediately after we have called mmc_wait_for_req().
>   - Modified the commit message to explain this change
> Changes in v3:
>   - Shorten the commit message to include only CMD17 related
>     code and test.
> Changes in v2:
>   - Make commit message clearer by adding test cases as outputs.
>
>  drivers/mmc/core/block.c | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
> index 672cc505ce378..94bb8b4cd6a4e 100644
> --- a/drivers/mmc/core/block.c
> +++ b/drivers/mmc/core/block.c
> @@ -557,6 +557,7 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
>                 return mmc_sanitize(card, idata->ic.cmd_timeout_ms);
>
>         mmc_wait_for_req(card->host, &mrq);
> +       memcpy(&idata->ic.response, cmd.resp, sizeof(cmd.resp));
>
>         if (cmd.error) {
>                 dev_err(mmc_dev(card->host), "%s: cmd error %d\n",
> @@ -606,8 +607,6 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
>         if (idata->ic.postsleep_min_us)
>                 usleep_range(idata->ic.postsleep_min_us, idata->ic.postsleep_max_us);
>
> -       memcpy(&(idata->ic.response), cmd.resp, sizeof(cmd.resp));
> -
>         if (idata->rpmb || (cmd.flags & MMC_RSP_R1B) == MMC_RSP_R1B) {
>                 /*
>                  * Ensure RPMB/R1B command has completed by polling CMD13
> --
> 2.17.1
>