linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alexandru Elisei <alexandru.elisei@arm.com>
To: maz@kernel.org, james.morse@arm.com, suzuki.poulose@arm.com,
	linux-arm-kernel@lists.infradead.org,
	kvmarm@lists.cs.columbia.edu, will@kernel.org,
	linux-kernel@vger.kernel.org
Subject: [RFC PATCH v4 29/39] KVM: arm64: Rename DEBUG_STATE_SAVE_SPE -> DEBUG_SAVE_SPE_BUFFER flags
Date: Wed, 25 Aug 2021 17:18:05 +0100	[thread overview]
Message-ID: <20210825161815.266051-30-alexandru.elisei@arm.com> (raw)
In-Reply-To: <20210825161815.266051-1-alexandru.elisei@arm.com>

Setting the KVM_ARM64_DEBUG_STATE_SAVE_SPE flag will stop profiling to
drain the buffer, if the buffer is enabled when switching to the guest, and
then re-enable profiling on the return to the host. Rename it to
KVM_ARM64_DEBUG_SAVE_SPE_BUFFER to avoid any confusion with what a SPE
enabled VCPU will do, which is to save and restore the full SPE state on a
world switch, and not just part of it, some of the time. This also matches
the name of the function __debug_save_host_buffers_nvhe(), which makes use
of the flag to decide if the buffer should be drained.

Similar treatment was applied to KVM_ARM64_DEBUG_STATE_SAVE_TRBE, which was
renamed to KVM_ARM64_DEBUG_SAVE_TRBE_BUFFER, for consistency and to better
reflect what it is doing.

CC: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
---
 arch/arm64/include/asm/kvm_host.h  | 24 ++++++++++++------------
 arch/arm64/kvm/debug.c             | 11 ++++++-----
 arch/arm64/kvm/hyp/nvhe/debug-sr.c |  8 ++++----
 3 files changed, 22 insertions(+), 21 deletions(-)

diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 351b77dc7732..e704847a7645 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -439,18 +439,18 @@ struct kvm_vcpu_arch {
 })
 
 /* vcpu_arch flags field values: */
-#define KVM_ARM64_DEBUG_DIRTY		(1 << 0)
-#define KVM_ARM64_FP_ENABLED		(1 << 1) /* guest FP regs loaded */
-#define KVM_ARM64_FP_HOST		(1 << 2) /* host FP regs loaded */
-#define KVM_ARM64_HOST_SVE_IN_USE	(1 << 3) /* backup for host TIF_SVE */
-#define KVM_ARM64_HOST_SVE_ENABLED	(1 << 4) /* SVE enabled for EL0 */
-#define KVM_ARM64_GUEST_HAS_SVE		(1 << 5) /* SVE exposed to guest */
-#define KVM_ARM64_VCPU_SVE_FINALIZED	(1 << 6) /* SVE config completed */
-#define KVM_ARM64_GUEST_HAS_PTRAUTH	(1 << 7) /* PTRAUTH exposed to guest */
-#define KVM_ARM64_PENDING_EXCEPTION	(1 << 8) /* Exception pending */
-#define KVM_ARM64_EXCEPT_MASK		(7 << 9) /* Target EL/MODE */
-#define KVM_ARM64_DEBUG_STATE_SAVE_SPE	(1 << 12) /* Save SPE context if active  */
-#define KVM_ARM64_DEBUG_STATE_SAVE_TRBE	(1 << 13) /* Save TRBE context if active  */
+#define KVM_ARM64_DEBUG_DIRTY			(1 << 0)
+#define KVM_ARM64_FP_ENABLED			(1 << 1) /* guest FP regs loaded */
+#define KVM_ARM64_FP_HOST			(1 << 2) /* host FP regs loaded */
+#define KVM_ARM64_HOST_SVE_IN_USE		(1 << 3) /* backup for host TIF_SVE */
+#define KVM_ARM64_HOST_SVE_ENABLED		(1 << 4) /* SVE enabled for EL0 */
+#define KVM_ARM64_GUEST_HAS_SVE			(1 << 5) /* SVE exposed to guest */
+#define KVM_ARM64_VCPU_SVE_FINALIZED		(1 << 6) /* SVE config completed */
+#define KVM_ARM64_GUEST_HAS_PTRAUTH		(1 << 7) /* PTRAUTH exposed to guest */
+#define KVM_ARM64_PENDING_EXCEPTION		(1 << 8) /* Exception pending */
+#define KVM_ARM64_EXCEPT_MASK			(7 << 9) /* Target EL/MODE */
+#define KVM_ARM64_DEBUG_SAVE_SPE_BUFFER		(1 << 12) /* Save SPE buffer if active  */
+#define KVM_ARM64_DEBUG_SAVE_TRBE_BUFFER	(1 << 13) /* Save TRBE buffer if active  */
 
 #define KVM_GUESTDBG_VALID_MASK (KVM_GUESTDBG_ENABLE | \
 				 KVM_GUESTDBG_USE_SW_BP | \
diff --git a/arch/arm64/kvm/debug.c b/arch/arm64/kvm/debug.c
index 70712cd85f32..6e5fc1887215 100644
--- a/arch/arm64/kvm/debug.c
+++ b/arch/arm64/kvm/debug.c
@@ -299,22 +299,23 @@ void kvm_arch_vcpu_load_debug_state_flags(struct kvm_vcpu *vcpu)
 		return;
 
 	dfr0 = read_sysreg(id_aa64dfr0_el1);
+
 	/*
 	 * If SPE is present on this CPU and is available at current EL,
-	 * we may need to check if the host state needs to be saved.
+	 * we may need to check if the host buffer needs to be drained.
 	 */
 	if (cpuid_feature_extract_unsigned_field(dfr0, ID_AA64DFR0_PMSVER_SHIFT) &&
 	    !(read_sysreg_s(SYS_PMBIDR_EL1) & BIT(SYS_PMBIDR_EL1_P_SHIFT)))
-		vcpu->arch.flags |= KVM_ARM64_DEBUG_STATE_SAVE_SPE;
+		vcpu->arch.flags |= KVM_ARM64_DEBUG_SAVE_SPE_BUFFER;
 
 	/* Check if we have TRBE implemented and available at the host */
 	if (cpuid_feature_extract_unsigned_field(dfr0, ID_AA64DFR0_TRBE_SHIFT) &&
 	    !(read_sysreg_s(SYS_TRBIDR_EL1) & TRBIDR_PROG))
-		vcpu->arch.flags |= KVM_ARM64_DEBUG_STATE_SAVE_TRBE;
+		vcpu->arch.flags |= KVM_ARM64_DEBUG_SAVE_TRBE_BUFFER;
 }
 
 void kvm_arch_vcpu_put_debug_state_flags(struct kvm_vcpu *vcpu)
 {
-	vcpu->arch.flags &= ~(KVM_ARM64_DEBUG_STATE_SAVE_SPE |
-			      KVM_ARM64_DEBUG_STATE_SAVE_TRBE);
+	vcpu->arch.flags &= ~(KVM_ARM64_DEBUG_SAVE_SPE_BUFFER |
+			      KVM_ARM64_DEBUG_SAVE_TRBE_BUFFER);
 }
diff --git a/arch/arm64/kvm/hyp/nvhe/debug-sr.c b/arch/arm64/kvm/hyp/nvhe/debug-sr.c
index 6db58722f045..186b90b5fd20 100644
--- a/arch/arm64/kvm/hyp/nvhe/debug-sr.c
+++ b/arch/arm64/kvm/hyp/nvhe/debug-sr.c
@@ -85,10 +85,10 @@ void __debug_save_host_buffers_nvhe(struct kvm_vcpu *vcpu,
 				    struct kvm_cpu_context *host_ctxt)
 {
 	/* Disable and flush SPE data generation */
-	if (vcpu->arch.flags & KVM_ARM64_DEBUG_STATE_SAVE_SPE)
+	if (vcpu->arch.flags & KVM_ARM64_DEBUG_SAVE_SPE_BUFFER)
 		__debug_save_spe(__ctxt_sys_reg(host_ctxt, PMSCR_EL1));
 	/* Disable and flush Self-Hosted Trace generation */
-	if (vcpu->arch.flags & KVM_ARM64_DEBUG_STATE_SAVE_TRBE)
+	if (vcpu->arch.flags & KVM_ARM64_DEBUG_SAVE_TRBE_BUFFER)
 		__debug_save_trace(&vcpu->arch.host_debug_state.trfcr_el1);
 }
 
@@ -100,9 +100,9 @@ void __debug_switch_to_guest(struct kvm_vcpu *vcpu)
 void __debug_restore_host_buffers_nvhe(struct kvm_vcpu *vcpu,
 				       struct kvm_cpu_context *host_ctxt)
 {
-	if (vcpu->arch.flags & KVM_ARM64_DEBUG_STATE_SAVE_SPE)
+	if (vcpu->arch.flags & KVM_ARM64_DEBUG_SAVE_SPE_BUFFER)
 		__debug_restore_spe(ctxt_sys_reg(host_ctxt, PMSCR_EL1));
-	if (vcpu->arch.flags & KVM_ARM64_DEBUG_STATE_SAVE_TRBE)
+	if (vcpu->arch.flags & KVM_ARM64_DEBUG_SAVE_TRBE_BUFFER)
 		__debug_restore_trace(vcpu->arch.host_debug_state.trfcr_el1);
 }
 
-- 
2.33.0


  parent reply	other threads:[~2021-08-25 16:18 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-25 16:17 [RFC PATCH v4 00/39] KVM: arm64: Add Statistical Profiling Extension (SPE) support Alexandru Elisei
2021-08-25 16:17 ` [RFC PATCH v4 01/39] KVM: arm64: Make lock_all_vcpus() available to the rest of KVM Alexandru Elisei
2021-09-22 10:39   ` Suzuki K Poulose
2021-08-25 16:17 ` [RFC PATCH v4 02/39] KVM: arm64: Add lock/unlock memslot user API Alexandru Elisei
2021-10-18  9:04   ` Suzuki K Poulose
2021-10-18 14:09     ` Alexandru Elisei
2021-08-25 16:17 ` [RFC PATCH v4 03/39] KVM: arm64: Implement the memslot lock/unlock functionality Alexandru Elisei
2021-08-25 16:17 ` [RFC PATCH v4 04/39] KVM: arm64: Defer CMOs for locked memslots until a VCPU is run Alexandru Elisei
2021-10-17 11:43   ` Marc Zyngier
2021-10-18 12:56     ` Alexandru Elisei
2021-08-25 16:17 ` [RFC PATCH v4 05/39] KVM: arm64: Perform CMOs on locked memslots when userspace resets VCPUs Alexandru Elisei
2021-08-25 16:17 ` [RFC PATCH v4 06/39] KVM: arm64: Delay tag scrubbing for locked memslots until a VCPU runs Alexandru Elisei
2021-08-25 16:17 ` [RFC PATCH v4 07/39] KVM: arm64: Unlock memslots after stage 2 tables are freed Alexandru Elisei
2021-08-25 16:17 ` [RFC PATCH v4 08/39] KVM: arm64: Deny changes to locked memslots Alexandru Elisei
2021-08-25 16:17 ` [RFC PATCH v4 09/39] KVM: Add kvm_warn{,_ratelimited} macros Alexandru Elisei
2021-08-25 16:17 ` [RFC PATCH v4 10/39] KVM: arm64: Print a warning for unexpected faults on locked memslots Alexandru Elisei
2021-08-25 16:17 ` [RFC PATCH v4 11/39] KVM: arm64: Allow userspace to lock and unlock memslots Alexandru Elisei
2021-08-25 16:17 ` [RFC PATCH v4 12/39] KVM: arm64: Add the KVM_ARM_VCPU_SUPPORTED_CPUS VCPU ioctl Alexandru Elisei
2021-08-25 16:17 ` [RFC PATCH v4 13/39] KVM: arm64: Add CONFIG_KVM_ARM_SPE Kconfig option Alexandru Elisei
2021-08-25 16:17 ` [RFC PATCH v4 14/39] KVM: arm64: Add SPE capability and VCPU feature Alexandru Elisei
2021-08-25 16:17 ` [RFC PATCH v4 15/39] drivers/perf: Expose the cpumask of CPUs that support SPE Alexandru Elisei
2021-08-25 16:17 ` [RFC PATCH v4 16/39] KVM: arm64: Make SPE available when at least one CPU supports it Alexandru Elisei
2021-08-25 16:17 ` [RFC PATCH v4 17/39] KVM: arm64: Set the VCPU SPE feature bit when SPE is available Alexandru Elisei
2021-08-25 16:17 ` [RFC PATCH v4 18/39] KVM: arm64: Expose SPE version to guests Alexandru Elisei
2021-08-25 16:17 ` [RFC PATCH v4 19/39] KVM: arm64: Do not emulate SPE on CPUs which don't have SPE Alexandru Elisei
2021-08-25 16:17 ` [RFC PATCH v4 20/39] KVM: arm64: Add a new VCPU device control group for SPE Alexandru Elisei
2021-08-25 16:17 ` [RFC PATCH v4 21/39] KVM: arm64: Add SPE VCPU device attribute to set the interrupt number Alexandru Elisei
2021-08-25 16:17 ` [RFC PATCH v4 22/39] KVM: arm64: Add SPE VCPU device attribute to initialize SPE Alexandru Elisei
2021-08-25 16:17 ` [RFC PATCH v4 23/39] KVM: arm64: VHE: Clear MDCR_EL2.E2PB in vcpu_put() Alexandru Elisei
2021-08-25 16:18 ` [RFC PATCH v4 24/39] KVM: arm64: debug: Configure MDCR_EL2 when a VCPU has SPE Alexandru Elisei
2021-08-25 16:18 ` [RFC PATCH v4 25/39] KVM: arm64: Move the write to MDCR_EL2 out of __activate_traps_common() Alexandru Elisei
2021-08-25 16:18 ` [RFC PATCH v4 26/39] KVM: arm64: VHE: Change MDCR_EL2 at world switch if VCPU has SPE Alexandru Elisei
2021-08-25 16:18 ` [RFC PATCH v4 27/39] KVM: arm64: Add SPE system registers to VCPU context Alexandru Elisei
2021-08-25 16:18 ` [RFC PATCH v4 28/39] KVM: arm64: nVHE: Save PMSCR_EL1 to the host context Alexandru Elisei
2021-08-25 16:18 ` Alexandru Elisei [this message]
2021-08-25 16:18 ` [RFC PATCH v4 30/39] KVM: arm64: nVHE: Context switch SPE state if VCPU has SPE Alexandru Elisei
2021-08-25 16:18 ` [RFC PATCH v4 31/39] KVM: arm64: VHE: " Alexandru Elisei
2021-08-25 16:18 ` [RFC PATCH v4 32/39] KVM: arm64: Save/restore PMSNEVFR_EL1 on VCPU put/load Alexandru Elisei
2021-08-25 16:18 ` [RFC PATCH v4 33/39] KVM: arm64: Allow guest to use physical timestamps if perfmon_capable() Alexandru Elisei
2021-08-25 16:18 ` [RFC PATCH v4 34/39] KVM: arm64: Emulate SPE buffer management interrupt Alexandru Elisei
2021-08-25 16:18 ` [RFC PATCH v4 35/39] KVM: arm64: Add an userspace API to stop a VCPU profiling Alexandru Elisei
2021-08-25 16:18 ` [RFC PATCH v4 36/39] KVM: arm64: Implement " Alexandru Elisei
2021-08-25 16:18 ` [RFC PATCH v4 37/39] KVM: arm64: Add PMSIDR_EL1 to the SPE register context Alexandru Elisei
2021-08-25 16:18 ` [RFC PATCH v4 38/39] KVM: arm64: Make CONFIG_KVM_ARM_SPE depend on !CONFIG_NUMA_BALANCING Alexandru Elisei
2021-08-25 16:18 ` [RFC PATCH v4 39/39] KVM: arm64: Allow userspace to enable SPE for guests Alexandru Elisei
2021-09-22 10:11 ` [RFC PATCH v4 00/39] KVM: arm64: Add Statistical Profiling Extension (SPE) support Suzuki K Poulose
2021-09-23 15:12   ` Alexandru Elisei

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210825161815.266051-30-alexandru.elisei@arm.com \
    --to=alexandru.elisei@arm.com \
    --cc=james.morse@arm.com \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maz@kernel.org \
    --cc=suzuki.poulose@arm.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).