linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Eizan Miyamoto <eizan@chromium.org>
To: linux-kernel@vger.kernel.org
Cc: chunkuang.hu@kernel.org, yong.wu@mediatek.com,
	wenst@chromium.org, ck.hu@mediatek.com, houlong.wei@mediatek.com,
	enric.balletbo@collabora.com, yongqiang.niu@mediatek.com,
	Eizan Miyamoto <eizan@chromium.org>,
	Andrew-CT Chen <andrew-ct.chen@mediatek.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Minghsiu Tsai <minghsiu.tsai@mediatek.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-media@vger.kernel.org, linux-mediatek@lists.infradead.org
Subject: [PATCH v7 7/7] media: mtk-mdp: use mdp-rdma0 alias to point to MDP master
Date: Wed, 25 Aug 2021 16:33:23 +1000	[thread overview]
Message-ID: <20210825163247.v7.7.I2049e180dca12e0d1b3178bfc7292dcf9e05ac28@changeid> (raw)
In-Reply-To: <20210825063323.3607738-1-eizan@chromium.org>

... Instead of depending on the presence of a mediatek,vpu property in
the device node.

That property was originally added to link to the vpu node so that the
mtk_mdp_core driver could pass the right device to
vpu_wdt_reg_handler(). However in a previous patch in this series,
the driver has been modified to search the device tree for that node
instead.

That property was also used to indicate the primary MDP device, so that
it can be passed to the V4L2 subsystem as well as register it to be
used when setting up queues in the open() callback for the filesystem
device node that is created. In this case, assuming that the primary
MDP device is the one with a specific alias seems useable because the
alternative is to add a property to the device tree which doesn't
actually represent any facet of hardware (i.e., this being the primary
MDP device is a software decision). In other words, this solution is
equally as arbitrary, but at least it doesn't add a property to a
device node where said property is unrelated to the hardware present.

Signed-off-by: Eizan Miyamoto <eizan@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

(no changes since v1)

 drivers/media/platform/mtk-mdp/mtk_mdp_comp.c | 56 +++++++++++++------
 drivers/media/platform/mtk-mdp/mtk_mdp_core.c | 36 ++++++++----
 2 files changed, 64 insertions(+), 28 deletions(-)

diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c
index 85ef274841a3..9527649de98e 100644
--- a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c
+++ b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c
@@ -151,29 +151,50 @@ void mtk_mdp_comp_clock_off(struct mtk_mdp_comp *comp)
 		mtk_smi_larb_put(comp->larb_dev);
 }
 
-static int mtk_mdp_comp_bind(struct device *dev, struct device *master, void *data)
+/*
+ * The MDP master device node is identified by the device tree alias
+ * "mdp-rdma0".
+ */
+static bool is_mdp_master(struct device *dev)
+{
+	struct device_node *aliases, *mdp_rdma0_node;
+	const char *mdp_rdma0_path;
+
+	if (!dev->of_node)
+		return false;
+
+	aliases = of_find_node_by_path("/aliases");
+	if (!aliases) {
+		dev_err(dev, "no aliases found for mdp-rdma0");
+		return false;
+	}
+
+	mdp_rdma0_path = of_get_property(aliases, "mdp-rdma0", NULL);
+	if (!mdp_rdma0_path) {
+		dev_err(dev, "get mdp-rdma0 property of /aliases failed");
+		return false;
+	}
+
+	mdp_rdma0_node = of_find_node_by_path(mdp_rdma0_path);
+	if (!mdp_rdma0_node) {
+		dev_err(dev, "path resolution failed for %s", mdp_rdma0_path);
+		return false;
+	}
+
+	return dev->of_node == mdp_rdma0_node;
+}
+
+static int mtk_mdp_comp_bind(struct device *dev, struct device *master,
+			void *data)
 {
 	struct mtk_mdp_comp *comp = dev_get_drvdata(dev);
 	struct mtk_mdp_dev *mdp = data;
-	struct device_node *vpu_node;
 
 	mtk_mdp_register_component(mdp, comp);
 
-	/*
-	 * If this component has a "mediatek-vpu" property, it is responsible for
-	 * notifying the mdp master driver about it so it can be further initialized
-	 * later.
-	 */
-	vpu_node = of_parse_phandle(dev->of_node, "mediatek,vpu", 0);
-	if (vpu_node) {
+	if (is_mdp_master(dev)) {
 		int ret;
 
-		mdp->vpu_dev = of_find_device_by_node(vpu_node);
-		if (WARN_ON(!mdp->vpu_dev)) {
-			dev_err(dev, "vpu pdev failed\n");
-			of_node_put(vpu_node);
-		}
-
 		ret = v4l2_device_register(dev, &mdp->v4l2_dev);
 		if (ret) {
 			dev_err(dev, "Failed to register v4l2 device\n");
@@ -187,9 +208,8 @@ static int mtk_mdp_comp_bind(struct device *dev, struct device *master, void *da
 		}
 
 		/*
-		 * presence of the "mediatek,vpu" property in a device node
-		 * indicates that it is the primary MDP rdma device and MDP DMA
-		 * ops should be handled by its DMA callbacks.
+		 * MDP DMA ops will be handled by the DMA callbacks associated with this
+		 * device;
 		 */
 		mdp->rdma_dev = dev;
 	}
diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_core.c b/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
index 50eafcc9993d..6a775463399c 100644
--- a/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
+++ b/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
@@ -150,8 +150,9 @@ static void release_of(struct device *dev, void *data)
 
 static int mtk_mdp_master_bind(struct device *dev)
 {
-	int status;
 	struct mtk_mdp_dev *mdp = dev_get_drvdata(dev);
+	struct device_node *vpu_node;
+	int status;
 
 	status = component_bind_all(dev, mdp);
 	if (status) {
@@ -159,15 +160,30 @@ static int mtk_mdp_master_bind(struct device *dev)
 		goto err_component_bind_all;
 	}
 
-	if (mdp->vpu_dev) {
-		int ret = vpu_wdt_reg_handler(mdp->vpu_dev, mtk_mdp_reset_handler, mdp,
-					  VPU_RST_MDP);
-		if (ret) {
-			dev_err(dev, "Failed to register reset handler\n");
-			goto err_wdt_reg;
-		}
-	} else {
-		dev_err(dev, "no vpu_dev found\n");
+	if (mdp->rdma_dev == NULL) {
+		dev_err(dev, "Primary MDP device not found");
+		status = -ENODEV;
+		goto err_component_bind_all;
+	}
+
+	vpu_node = of_find_node_by_name(NULL, "vpu");
+	if (!vpu_node) {
+		dev_err(dev, "unable to find vpu node");
+		status = -ENODEV;
+		goto err_wdt_reg;
+	}
+
+	mdp->vpu_dev = of_find_device_by_node(vpu_node);
+	if (!mdp->vpu_dev) {
+		dev_err(dev, "unable to find vpu device");
+		status = -ENODEV;
+		goto err_wdt_reg;
+	}
+
+	status = vpu_wdt_reg_handler(mdp->vpu_dev, mtk_mdp_reset_handler, mdp, VPU_RST_MDP);
+	if (status) {
+		dev_err(dev, "Failed to register reset handler\n");
+		goto err_wdt_reg;
 	}
 
 	status = mtk_mdp_register_m2m_device(mdp);
-- 
2.33.0.rc2.250.ged5fa647cd-goog


  parent reply	other threads:[~2021-08-25  6:34 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-25  6:33 [PATCH v7 0/7] Refactor MTK MDP driver into core/components Eizan Miyamoto
2021-08-25  6:33 ` [PATCH v7 1/7] mtk-mdp: propagate errors from clock_on Eizan Miyamoto
2021-08-25  6:33 ` [PATCH v7 2/7] mtk-mdp: add driver to probe mdp components Eizan Miyamoto
2021-09-04 12:34   ` Ezequiel Garcia
2021-09-05 16:23     ` houlong wei
2021-09-05 16:39       ` houlong wei
2021-12-07 12:37       ` Hans Verkuil
2021-12-07 12:46         ` Ezequiel Garcia
2021-12-07 13:02           ` Hans Verkuil
2021-12-08  2:00       ` Yong Wu
2021-08-25  6:33 ` [PATCH v7 3/7] mtk-mdp: use pm_runtime in MDP component driver Eizan Miyamoto
2021-08-25  6:33 ` [PATCH v7 4/7] media: mtk-mdp: don't pm_run_time_get/put for master comp in clock_on Eizan Miyamoto
2021-08-25  6:33 ` [PATCH v7 5/7] mtk-mdp: make mdp driver to be loadable by platform_device_register*() Eizan Miyamoto
2021-08-25  8:18   ` houlong wei
2021-08-25  6:33 ` [PATCH v7 6/7] soc: mediatek: mmsys: instantiate mdp virtual device from mmsys Eizan Miyamoto
2021-08-25  6:33 ` Eizan Miyamoto [this message]
2021-08-25  8:43   ` [PATCH v7 7/7] media: mtk-mdp: use mdp-rdma0 alias to point to MDP master houlong wei
2021-08-25  9:07     ` Enric Balletbo i Serra
2021-08-25 15:18       ` houlong wei
2021-08-25 16:54         ` Enric Balletbo i Serra
2021-08-30 17:14           ` houlong wei

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210825163247.v7.7.I2049e180dca12e0d1b3178bfc7292dcf9e05ac28@changeid \
    --to=eizan@chromium.org \
    --cc=andrew-ct.chen@mediatek.com \
    --cc=chunkuang.hu@kernel.org \
    --cc=ck.hu@mediatek.com \
    --cc=enric.balletbo@collabora.com \
    --cc=houlong.wei@mediatek.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=mchehab@kernel.org \
    --cc=minghsiu.tsai@mediatek.com \
    --cc=wenst@chromium.org \
    --cc=yong.wu@mediatek.com \
    --cc=yongqiang.niu@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).