linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Waiman Long <longman@redhat.com>
To: Tejun Heo <tj@kernel.org>, Zefan Li <lizefan.x@bytedance.com>,
	Johannes Weiner <hannes@cmpxchg.org>,
	Jonathan Corbet <corbet@lwn.net>, Shuah Khan <shuah@kernel.org>
Cc: cgroups@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-doc@vger.kernel.org, linux-kselftest@vger.kernel.org,
	"Andrew Morton" <akpm@linux-foundation.org>,
	"Roman Gushchin" <guro@fb.com>, "Phil Auld" <pauld@redhat.com>,
	"Peter Zijlstra" <peterz@infradead.org>,
	"Juri Lelli" <juri.lelli@redhat.com>,
	"Frederic Weisbecker" <frederic@kernel.org>,
	"Marcelo Tosatti" <mtosatti@redhat.com>,
	"Michal Koutný" <mkoutny@suse.com>,
	"Waiman Long" <longman@redhat.com>
Subject: [PATCH v7 3/6] cgroup/cpuset: Add a new isolated cpus.partition type
Date: Wed, 25 Aug 2021 17:37:47 -0400	[thread overview]
Message-ID: <20210825213750.6933-4-longman@redhat.com> (raw)
In-Reply-To: <20210825213750.6933-1-longman@redhat.com>

Cpuset v1 uses the sched_load_balance control file to determine if load
balancing should be enabled.  Cpuset v2 gets rid of sched_load_balance
as its use may require disabling load balancing at cgroup root.

For workloads that require very low latency like DPDK, the latency
jitters caused by periodic load balancing may exceed the desired
latency limit.

When cpuset v2 is in use, the only way to avoid this latency cost is to
use the "isolcpus=" kernel boot option to isolate a set of CPUs. After
the kernel boot, however, there is no way to add or remove CPUs from
this isolated set. For workloads that are more dynamic in nature, that
means users have to provision enough CPUs for the worst case situation
resulting in excess idle CPUs.

To address this issue for cpuset v2, a new cpuset.cpus.partition type
"isolated" is added which allows the creation of a cpuset partition
without load balancing. This will allow system administrators to
dynamically adjust the size of isolated partition to the current need
of the workload without rebooting the system.

Signed-off-by: Waiman Long <longman@redhat.com>
---
 kernel/cgroup/cpuset.c | 48 +++++++++++++++++++++++++++++++++++++-----
 1 file changed, 43 insertions(+), 5 deletions(-)

diff --git a/kernel/cgroup/cpuset.c b/kernel/cgroup/cpuset.c
index eb2e81f9326b..de770a3781c2 100644
--- a/kernel/cgroup/cpuset.c
+++ b/kernel/cgroup/cpuset.c
@@ -193,6 +193,8 @@ struct cpuset {
  *
  *   1 - partition root
  *
+ *   2 - partition root without load balancing (isolated)
+ *
  *  -1 - invalid partition root
  *       None of the cpus in cpus_allowed can be put into the parent's
  *       subparts_cpus. In this case, the cpuset is not a real partition
@@ -202,6 +204,7 @@ struct cpuset {
  */
 #define PRS_DISABLED		0
 #define PRS_ENABLED		1
+#define PRS_ISOLATED		2
 #define PRS_ERROR		-1
 
 /*
@@ -1298,17 +1301,22 @@ static int update_parent_subparts_cpumask(struct cpuset *cpuset, int cmd,
 
 	if (cmd == partcmd_update) {
 		/*
-		 * Check for possible transition between PRS_ENABLED
-		 * and PRS_ERROR.
+		 * Check for possible transition between PRS_ERROR and
+		 * PRS_ENABLED/PRS_ISOLATED.
 		 */
 		switch (cpuset->partition_root_state) {
 		case PRS_ENABLED:
+		case PRS_ISOLATED:
 			if (part_error)
 				new_prs = PRS_ERROR;
 			break;
 		case PRS_ERROR:
-			if (!part_error)
+			if (part_error)
+				break;
+			if (is_sched_load_balance(cpuset))
 				new_prs = PRS_ENABLED;
+			else
+				new_prs = PRS_ISOLATED;
 			break;
 		}
 	}
@@ -1443,6 +1451,7 @@ static void update_cpumasks_hier(struct cpuset *cs, struct tmpmasks *tmp)
 				break;
 
 			case PRS_ENABLED:
+			case PRS_ISOLATED:
 				if (update_parent_subparts_cpumask(cp, partcmd_update, NULL, tmp))
 					update_tasks_cpumask(parent);
 				/*
@@ -1468,7 +1477,7 @@ static void update_cpumasks_hier(struct cpuset *cs, struct tmpmasks *tmp)
 
 		spin_lock_irq(&callback_lock);
 
-		if (cp->nr_subparts_cpus && (new_prs != PRS_ENABLED)) {
+		if (cp->nr_subparts_cpus && (new_prs <= 0)) {
 			/*
 			 * Put all active subparts_cpus back to effective_cpus.
 			 */
@@ -2012,6 +2021,7 @@ static int update_prstate(struct cpuset *cs, int new_prs)
 	int err, old_prs = cs->partition_root_state;
 	struct cpuset *parent = parent_cs(cs);
 	struct tmpmasks tmpmask;
+	bool sched_domain_rebuilt = false;
 
 	if (old_prs == new_prs)
 		return 0;
@@ -2046,6 +2056,22 @@ static int update_prstate(struct cpuset *cs, int new_prs)
 			update_flag(CS_CPU_EXCLUSIVE, cs, 0);
 			goto out;
 		}
+
+		if (new_prs == PRS_ISOLATED) {
+			/*
+			 * Disable the load balance flag should not return an
+			 * error unless the system is running out of memory.
+			 */
+			update_flag(CS_SCHED_LOAD_BALANCE, cs, 0);
+			sched_domain_rebuilt = true;
+		}
+	} else if (old_prs && new_prs) {
+		/*
+		 * A change in load balance state only, no change in cpumasks.
+		 */
+		update_flag(CS_SCHED_LOAD_BALANCE, cs, (new_prs != PRS_ISOLATED));
+		err = 0;
+		goto out;	/* Sched domain is rebuilt in update_flag() */
 	} else {
 		/*
 		 * Switch back to member is always allowed even if it
@@ -2068,6 +2094,12 @@ static int update_prstate(struct cpuset *cs, int new_prs)
 
 		/* Turning off CS_CPU_EXCLUSIVE will not return error */
 		update_flag(CS_CPU_EXCLUSIVE, cs, 0);
+
+		if (!is_sched_load_balance(cs)) {
+			/* Make sure load balance is on */
+			update_flag(CS_SCHED_LOAD_BALANCE, cs, 1);
+			sched_domain_rebuilt = true;
+		}
 	}
 
 	/*
@@ -2080,7 +2112,8 @@ static int update_prstate(struct cpuset *cs, int new_prs)
 	if (parent->child_ecpus_count)
 		update_sibling_cpumasks(parent, cs, &tmpmask);
 
-	rebuild_sched_domains_locked();
+	if (!sched_domain_rebuilt)
+		rebuild_sched_domains_locked();
 out:
 	if (!err) {
 		spin_lock_irq(&callback_lock);
@@ -2583,6 +2616,9 @@ static int sched_partition_show(struct seq_file *seq, void *v)
 	case PRS_ENABLED:
 		seq_puts(seq, "root\n");
 		break;
+	case PRS_ISOLATED:
+		seq_puts(seq, "isolated\n");
+		break;
 	case PRS_DISABLED:
 		seq_puts(seq, "member\n");
 		break;
@@ -2613,6 +2649,8 @@ static ssize_t sched_partition_write(struct kernfs_open_file *of, char *buf,
 		val = PRS_ENABLED;
 	else if (!strcmp(buf, "member"))
 		val = PRS_DISABLED;
+	else if (!strcmp(buf, "isolated"))
+		val = PRS_ISOLATED;
 	else
 		return -EINVAL;
 
-- 
2.18.1


  parent reply	other threads:[~2021-08-25 21:40 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-25 21:37 [PATCH v7 0/6] cgroup/cpuset: Add new cpuset partition type & empty effecitve cpus Waiman Long
2021-08-25 21:37 ` [PATCH v7 1/6] cgroup/cpuset: Properly transition to invalid partition Waiman Long
2021-08-25 21:37 ` [PATCH v7 2/6] cgroup/cpuset: Show invalid partition reason string Waiman Long
2021-08-25 21:37 ` Waiman Long [this message]
2021-08-25 21:37 ` [PATCH v7 4/6] cgroup/cpuset: Allow non-top parent partition to distribute out all CPUs Waiman Long
2021-08-25 21:37 ` [PATCH v7 5/6] cgroup/cpuset: Update description of cpuset.cpus.partition in cgroup-v2.rst Waiman Long
2021-08-26 17:35   ` Tejun Heo
2021-08-27  3:01     ` Waiman Long
2021-08-27  4:00       ` Tejun Heo
2021-08-27 21:19         ` Waiman Long
2021-08-27 21:27           ` Tejun Heo
2021-08-27 22:50             ` Waiman Long
2021-08-27 23:35               ` Tejun Heo
2021-08-28  1:14                 ` Waiman Long
     [not found]                 ` <3533e4f9-169c-d13c-9c4e-d9ec6bdc78f0@redhat.com>
2021-10-12 14:39                   ` Michal Koutný
2021-10-13 21:45                     ` Waiman Long
2021-10-13 22:11                       ` Waiman Long
2021-08-30 17:59               ` Michal Koutný
2021-08-25 21:37 ` [PATCH v7 6/6] kselftest/cgroup: Add cpuset v2 partition root state test Waiman Long

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210825213750.6933-4-longman@redhat.com \
    --to=longman@redhat.com \
    --cc=akpm@linux-foundation.org \
    --cc=cgroups@vger.kernel.org \
    --cc=corbet@lwn.net \
    --cc=frederic@kernel.org \
    --cc=guro@fb.com \
    --cc=hannes@cmpxchg.org \
    --cc=juri.lelli@redhat.com \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-kselftest@vger.kernel.org \
    --cc=lizefan.x@bytedance.com \
    --cc=mkoutny@suse.com \
    --cc=mtosatti@redhat.com \
    --cc=pauld@redhat.com \
    --cc=peterz@infradead.org \
    --cc=shuah@kernel.org \
    --cc=tj@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).