[PATCH AUTOSEL 5.4 01/10] gpu: ipu-v3: Fix i.MX IPU-v3 offset calculations for (semi)planar U/V formats

[PATCH AUTOSEL 5.4 01/10] gpu: ipu-v3: Fix i.MX IPU-v3 offset calculations for (semi)planar U/V formats

[Sasha Levin]

From: Krzysztof Hałasa <khalasa@piap.pl>

[ Upstream commit 7cca7c8096e2c8a4149405438329b5035d0744f0 ]

Video captured in 1400x1050 resolution (bytesperline aka stride = 1408
bytes) is invalid. Fix it.

Signed-off-by: Krzysztof Halasa <khalasa@piap.pl>
Link: https://lore.kernel.org/r/m3y2bmq7a4.fsf@t19.piap.pl
[p.zabel@pengutronix.de: added "gpu: ipu-v3:" prefix to commit description]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/ipu-v3/ipu-cpmem.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/ipu-v3/ipu-cpmem.c b/drivers/gpu/ipu-v3/ipu-cpmem.c
index a1c85d1521f5..82b244cb313e 100644
--- a/drivers/gpu/ipu-v3/ipu-cpmem.c
+++ b/drivers/gpu/ipu-v3/ipu-cpmem.c
@@ -585,21 +585,21 @@ static const struct ipu_rgb def_bgra_16 = {
 	.bits_per_pixel = 16,
 };
 
-#define Y_OFFSET(pix, x, y)	((x) + pix->width * (y))
-#define U_OFFSET(pix, x, y)	((pix->width * pix->height) +		\
-				 (pix->width * ((y) / 2) / 2) + (x) / 2)
-#define V_OFFSET(pix, x, y)	((pix->width * pix->height) +		\
-				 (pix->width * pix->height / 4) +	\
-				 (pix->width * ((y) / 2) / 2) + (x) / 2)
-#define U2_OFFSET(pix, x, y)	((pix->width * pix->height) +		\
-				 (pix->width * (y) / 2) + (x) / 2)
-#define V2_OFFSET(pix, x, y)	((pix->width * pix->height) +		\
-				 (pix->width * pix->height / 2) +	\
-				 (pix->width * (y) / 2) + (x) / 2)
-#define UV_OFFSET(pix, x, y)	((pix->width * pix->height) +	\
-				 (pix->width * ((y) / 2)) + (x))
-#define UV2_OFFSET(pix, x, y)	((pix->width * pix->height) +	\
-				 (pix->width * y) + (x))
+#define Y_OFFSET(pix, x, y)	((x) + pix->bytesperline * (y))
+#define U_OFFSET(pix, x, y)	((pix->bytesperline * pix->height) +	 \
+				 (pix->bytesperline * ((y) / 2) / 2) + (x) / 2)
+#define V_OFFSET(pix, x, y)	((pix->bytesperline * pix->height) +	 \
+				 (pix->bytesperline * pix->height / 4) + \
+				 (pix->bytesperline * ((y) / 2) / 2) + (x) / 2)
+#define U2_OFFSET(pix, x, y)	((pix->bytesperline * pix->height) +	 \
+				 (pix->bytesperline * (y) / 2) + (x) / 2)
+#define V2_OFFSET(pix, x, y)	((pix->bytesperline * pix->height) +	 \
+				 (pix->bytesperline * pix->height / 2) + \
+				 (pix->bytesperline * (y) / 2) + (x) / 2)
+#define UV_OFFSET(pix, x, y)	((pix->bytesperline * pix->height) +	 \
+				 (pix->bytesperline * ((y) / 2)) + (x))
+#define UV2_OFFSET(pix, x, y)	((pix->bytesperline * pix->height) +	 \
+				 (pix->bytesperline * y) + (x))
 
 #define NUM_ALPHA_CHANNELS	7
 
-- 
2.30.2

[PATCH AUTOSEL 5.4 02/10] reset: reset-zynqmp: Fixed the argument data type

[Sasha Levin]

From: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>

[ Upstream commit ed104ca4bd9c405b41e968ad4ece51f6462e90b6 ]

This patch changes the data type of the variable 'val' from
int to u32.

Addresses-Coverity: argument of type "int *" is incompatible with parameter of type "u32 *"
Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/925cebbe4eb73c7d0a536da204748d33c7100d8c.1624448778.git.michal.simek@xilinx.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/reset/reset-zynqmp.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/reset/reset-zynqmp.c b/drivers/reset/reset-zynqmp.c
index 99e75d92dada..8a7473b6ba58 100644
--- a/drivers/reset/reset-zynqmp.c
+++ b/drivers/reset/reset-zynqmp.c
@@ -46,7 +46,8 @@ static int zynqmp_reset_status(struct reset_controller_dev *rcdev,
 			       unsigned long id)
 {
 	struct zynqmp_reset_data *priv = to_zynqmp_reset_data(rcdev);
-	int val, err;
+	int err;
+	u32 val;
 
 	err = priv->eemi_ops->reset_get_status(ZYNQMP_RESET_ID + id, &val);
 	if (err)
-- 
2.30.2

[PATCH AUTOSEL 5.4 03/10] qed: Fix the VF msix vectors flow

[Sasha Levin]

From: Shai Malin <smalin@marvell.com>

[ Upstream commit b0cd08537db8d2fbb227cdb2e5835209db295a24 ]

For VFs we should return with an error in case we didn't get the exact
number of msix vectors as we requested.
Not doing that will lead to a crash when starting queues for this VF.

Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_main.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c
index bc1f5b36b5bf..1db49424aa43 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_main.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_main.c
@@ -559,7 +559,12 @@ static int qed_enable_msix(struct qed_dev *cdev,
 			rc = cnt;
 	}
 
-	if (rc > 0) {
+	/* For VFs, we should return with an error in case we didn't get the
+	 * exact number of msix vectors as we requested.
+	 * Not doing that will lead to a crash when starting queues for
+	 * this VF.
+	 */
+	if ((IS_PF(cdev) && rc > 0) || (IS_VF(cdev) && rc == cnt)) {
 		/* MSI-x configuration was achieved */
 		int_params->out.int_mode = QED_INT_MODE_MSIX;
 		int_params->out.num_vectors = rc;
-- 
2.30.2

[PATCH AUTOSEL 5.4 04/10] net: macb: Add a NULL check on desc_ptp

[Sasha Levin]

From: Harini Katakam <harini.katakam@xilinx.com>

[ Upstream commit 85520079afce885b80647fbd0d13d8f03d057167 ]

macb_ptp_desc will not return NULL under most circumstances with correct
Kconfig and IP design config register. But for the sake of the extreme
corner case, check for NULL when using the helper. In case of rx_tstamp,
no action is necessary except to return (similar to timestamp disabled)
and warn. In case of TX, return -EINVAL to let the skb be free. Perform
this check before marking skb in progress.
Fixes coverity warning:
(4) Event dereference:
Dereferencing a null pointer "desc_ptp"

Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/cadence/macb_ptp.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/cadence/macb_ptp.c b/drivers/net/ethernet/cadence/macb_ptp.c
index 43a3f0dbf857..f5aec28c7730 100644
--- a/drivers/net/ethernet/cadence/macb_ptp.c
+++ b/drivers/net/ethernet/cadence/macb_ptp.c
@@ -275,6 +275,12 @@ void gem_ptp_rxstamp(struct macb *bp, struct sk_buff *skb,
 
 	if (GEM_BFEXT(DMA_RXVALID, desc->addr)) {
 		desc_ptp = macb_ptp_desc(bp, desc);
+		/* Unlikely but check */
+		if (!desc_ptp) {
+			dev_warn_ratelimited(&bp->pdev->dev,
+					     "Timestamp not supported in BD\n");
+			return;
+		}
 		gem_hw_timestamp(bp, desc_ptp->ts_1, desc_ptp->ts_2, &ts);
 		memset(shhwtstamps, 0, sizeof(struct skb_shared_hwtstamps));
 		shhwtstamps->hwtstamp = ktime_set(ts.tv_sec, ts.tv_nsec);
@@ -307,8 +313,11 @@ int gem_ptp_txstamp(struct macb_queue *queue, struct sk_buff *skb,
 	if (CIRC_SPACE(head, tail, PTP_TS_BUFFER_SIZE) == 0)
 		return -ENOMEM;
 
-	skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
 	desc_ptp = macb_ptp_desc(queue->bp, desc);
+	/* Unlikely but check */
+	if (!desc_ptp)
+		return -EINVAL;
+	skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
 	tx_timestamp = &queue->tx_timestamps[head];
 	tx_timestamp->skb = skb;
 	/* ensure ts_1/ts_2 is loaded after ctrl (TX_USED check) */
-- 
2.30.2

[PATCH AUTOSEL 5.4 05/10] qede: Fix memset corruption

[Sasha Levin]

From: Shai Malin <smalin@marvell.com>

[ Upstream commit e543468869e2532f5d7926e8f417782b48eca3dc ]

Thanks to Kees Cook who detected the problem of memset that starting
from not the first member, but sized for the whole struct.
The better change will be to remove the redundant memset and to clear
only the msix_cnt member.

Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Reported-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qede/qede_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c
index ce3e62e73e4c..1133f6fe21a0 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_main.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_main.c
@@ -1773,6 +1773,7 @@ static void qede_sync_free_irqs(struct qede_dev *edev)
 	}
 
 	edev->int_info.used_cnt = 0;
+	edev->int_info.msix_cnt = 0;
 }
 
 static int qede_req_msix_irqs(struct qede_dev *edev)
@@ -2317,7 +2318,6 @@ static int qede_load(struct qede_dev *edev, enum qede_load_mode mode,
 	goto out;
 err4:
 	qede_sync_free_irqs(edev);
-	memset(&edev->int_info.msix_cnt, 0, sizeof(struct qed_int_info));
 err3:
 	qede_napi_disable_remove(edev);
 err2:
-- 
2.30.2

[PATCH AUTOSEL 5.4 06/10] perf/x86/intel/pt: Fix mask of num_address_ranges

[Sasha Levin]

From: Xiaoyao Li <xiaoyao.li@intel.com>

[ Upstream commit c53c6b7409f4cd9e542991b53d597fbe2751d7db ]

Per SDM, bit 2:0 of CPUID(0x14,1).EAX[2:0] reports the number of
configurable address ranges for filtering, not bit 1:0.

Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lkml.kernel.org/r/20210824040622.4081502-1-xiaoyao.li@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/intel/pt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/events/intel/pt.c b/arch/x86/events/intel/pt.c
index 05e43d0f430b..da289a44d511 100644
--- a/arch/x86/events/intel/pt.c
+++ b/arch/x86/events/intel/pt.c
@@ -62,7 +62,7 @@ static struct pt_cap_desc {
 	PT_CAP(single_range_output,	0, CPUID_ECX, BIT(2)),
 	PT_CAP(output_subsys,		0, CPUID_ECX, BIT(3)),
 	PT_CAP(payloads_lip,		0, CPUID_ECX, BIT(31)),
-	PT_CAP(num_address_ranges,	1, CPUID_EAX, 0x3),
+	PT_CAP(num_address_ranges,	1, CPUID_EAX, 0x7),
 	PT_CAP(mtc_periods,		1, CPUID_EAX, 0xffff0000),
 	PT_CAP(cycle_thresholds,	1, CPUID_EBX, 0xffff),
 	PT_CAP(psb_periods,		1, CPUID_EBX, 0xffff0000),
-- 
2.30.2

[PATCH AUTOSEL 5.4 07/10] perf/x86/amd/ibs: Work around erratum #1197

[Sasha Levin]

From: Kim Phillips <kim.phillips@amd.com>

[ Upstream commit 26db2e0c51fe83e1dd852c1321407835b481806e ]

Erratum #1197 "IBS (Instruction Based Sampling) Register State May be
Incorrect After Restore From CC6" is published in a document:

  "Revision Guide for AMD Family 19h Models 00h-0Fh Processors" 56683 Rev. 1.04 July 2021

  https://bugzilla.kernel.org/show_bug.cgi?id=206537

Implement the erratum's suggested workaround and ignore IBS samples if
MSRC001_1031 == 0.

Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210817221048.88063-3-kim.phillips@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/amd/ibs.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/x86/events/amd/ibs.c b/arch/x86/events/amd/ibs.c
index 39169885adfa..ff07040287c4 100644
--- a/arch/x86/events/amd/ibs.c
+++ b/arch/x86/events/amd/ibs.c
@@ -90,6 +90,7 @@ struct perf_ibs {
 	unsigned long			offset_mask[1];
 	int				offset_max;
 	unsigned int			fetch_count_reset_broken : 1;
+	unsigned int			fetch_ignore_if_zero_rip : 1;
 	struct cpu_perf_ibs __percpu	*pcpu;
 
 	struct attribute		**format_attrs;
@@ -663,6 +664,10 @@ static int perf_ibs_handle_irq(struct perf_ibs *perf_ibs, struct pt_regs *iregs)
 	if (check_rip && (ibs_data.regs[2] & IBS_RIP_INVALID)) {
 		regs.flags &= ~PERF_EFLAGS_EXACT;
 	} else {
+		/* Workaround for erratum #1197 */
+		if (perf_ibs->fetch_ignore_if_zero_rip && !(ibs_data.regs[1]))
+			goto out;
+
 		set_linear_ip(&regs, ibs_data.regs[1]);
 		regs.flags |= PERF_EFLAGS_EXACT;
 	}
@@ -756,6 +761,9 @@ static __init void perf_event_ibs_init(void)
 	if (boot_cpu_data.x86 >= 0x16 && boot_cpu_data.x86 <= 0x18)
 		perf_ibs_fetch.fetch_count_reset_broken = 1;
 
+	if (boot_cpu_data.x86 == 0x19 && boot_cpu_data.x86_model < 0x10)
+		perf_ibs_fetch.fetch_ignore_if_zero_rip = 1;
+
 	perf_ibs_pmu_init(&perf_ibs_fetch, "ibs_fetch");
 
 	if (ibs_caps & IBS_CAPS_OPCNT) {
-- 
2.30.2

[PATCH AUTOSEL 5.4 08/10] perf/x86/amd/power: Assign pmu.module

[Sasha Levin]

From: Kim Phillips <kim.phillips@amd.com>

[ Upstream commit ccf26483416a339c114409f6e7cd02abdeaf8052 ]

Assign pmu.module so the driver can't be unloaded whilst in use.

Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210817221048.88063-4-kim.phillips@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/amd/power.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/events/amd/power.c b/arch/x86/events/amd/power.c
index abef51320e3a..c4892b7d0c36 100644
--- a/arch/x86/events/amd/power.c
+++ b/arch/x86/events/amd/power.c
@@ -217,6 +217,7 @@ static struct pmu pmu_class = {
 	.stop		= pmu_event_stop,
 	.read		= pmu_event_read,
 	.capabilities	= PERF_PMU_CAP_NO_EXCLUDE,
+	.module		= THIS_MODULE,
 };
 
 static int power_cpu_exit(unsigned int cpu)
-- 
2.30.2

[PATCH AUTOSEL 5.4 09/10] net: fix NULL pointer reference in cipso_v4_doi_free

[Sasha Levin]

From: 王贇 <yun.wang@linux.alibaba.com>

[ Upstream commit 733c99ee8be9a1410287cdbb943887365e83b2d6 ]

In netlbl_cipsov4_add_std() when 'doi_def->map.std' alloc
failed, we sometime observe panic:

  BUG: kernel NULL pointer dereference, address:
  ...
  RIP: 0010:cipso_v4_doi_free+0x3a/0x80
  ...
  Call Trace:
   netlbl_cipsov4_add_std+0xf4/0x8c0
   netlbl_cipsov4_add+0x13f/0x1b0
   genl_family_rcv_msg_doit.isra.15+0x132/0x170
   genl_rcv_msg+0x125/0x240

This is because in cipso_v4_doi_free() there is no check
on 'doi_def->map.std' when 'doi_def->type' equal 1, which
is possibe, since netlbl_cipsov4_add_std() haven't initialize
it before alloc 'doi_def->map.std'.

This patch just add the check to prevent panic happen for similar
cases.

Reported-by: Abaci <abaci@linux.alibaba.com>
Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/cipso_ipv4.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/net/ipv4/cipso_ipv4.c b/net/ipv4/cipso_ipv4.c
index c1ac802d6894..18b80ee76b02 100644
--- a/net/ipv4/cipso_ipv4.c
+++ b/net/ipv4/cipso_ipv4.c
@@ -466,14 +466,16 @@ void cipso_v4_doi_free(struct cipso_v4_doi *doi_def)
 	if (!doi_def)
 		return;
 
-	switch (doi_def->type) {
-	case CIPSO_V4_MAP_TRANS:
-		kfree(doi_def->map.std->lvl.cipso);
-		kfree(doi_def->map.std->lvl.local);
-		kfree(doi_def->map.std->cat.cipso);
-		kfree(doi_def->map.std->cat.local);
-		kfree(doi_def->map.std);
-		break;
+	if (doi_def->map.std) {
+		switch (doi_def->type) {
+		case CIPSO_V4_MAP_TRANS:
+			kfree(doi_def->map.std->lvl.cipso);
+			kfree(doi_def->map.std->lvl.local);
+			kfree(doi_def->map.std->cat.cipso);
+			kfree(doi_def->map.std->cat.local);
+			kfree(doi_def->map.std);
+			break;
+		}
 	}
 	kfree(doi_def);
 }
-- 
2.30.2

[PATCH AUTOSEL 5.4 10/10] cryptoloop: add a deprecation warning

[Sasha Levin]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit 222013f9ac30b9cec44301daa8dbd0aae38abffb ]

Support for cryptoloop has been officially marked broken and deprecated
in favor of dm-crypt (which supports the same broken algorithms if
needed) in Linux 2.6.4 (released in March 2004), and support for it has
been entirely removed from losetup in util-linux 2.23 (released in April
2013).  Add a warning and a deprecation schedule.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210827163250.255325-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/Kconfig      | 4 ++--
 drivers/block/cryptoloop.c | 2 ++
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 0fc27ac14f29..9f6782329a23 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -230,7 +230,7 @@ config BLK_DEV_LOOP_MIN_COUNT
 	  dynamically allocated with the /dev/loop-control interface.
 
 config BLK_DEV_CRYPTOLOOP
-	tristate "Cryptoloop Support"
+	tristate "Cryptoloop Support (DEPRECATED)"
 	select CRYPTO
 	select CRYPTO_CBC
 	depends on BLK_DEV_LOOP
@@ -242,7 +242,7 @@ config BLK_DEV_CRYPTOLOOP
 	  WARNING: This device is not safe for journaled file systems like
 	  ext3 or Reiserfs. Please use the Device Mapper crypto module
 	  instead, which can be configured to be on-disk compatible with the
-	  cryptoloop device.
+	  cryptoloop device.  cryptoloop support will be removed in Linux 5.16.
 
 source "drivers/block/drbd/Kconfig"
 
diff --git a/drivers/block/cryptoloop.c b/drivers/block/cryptoloop.c
index 3cabc335ae74..f0a91faa43a8 100644
--- a/drivers/block/cryptoloop.c
+++ b/drivers/block/cryptoloop.c
@@ -189,6 +189,8 @@ init_cryptoloop(void)
 
 	if (rc)
 		printk(KERN_ERR "cryptoloop: loop_register_transfer failed\n");
+	else
+		pr_warn("the cryptoloop driver has been deprecated and will be removed in in Linux 5.16\n");
 	return rc;
 }
 
-- 
2.30.2