From: Michael Straube <straube.linux@gmail.com>
To: gregkh@linuxfoundation.org
Cc: Larry.Finger@lwfinger.net, phil@philpotter.co.uk,
martin@kaiser.cx, fmdefrancesco@gmail.com,
linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org,
Michael Straube <straube.linux@gmail.com>
Subject: [PATCH 5/7] staging: r8188eu: remove read_rfreg from struct hal_ops
Date: Fri, 10 Sep 2021 22:50:31 +0200 [thread overview]
Message-ID: <20210910205033.3778-6-straube.linux@gmail.com> (raw)
In-Reply-To: <20210910205033.3778-1-straube.linux@gmail.com>
Remove read_rfreg from struct hal_ops and its wrapper
rtw_hal_read_rfreg(). Call rtl8188e_PHY_QueryRFReg() directly instead.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
---
drivers/staging/r8188eu/core/rtw_debug.c | 8 ++++----
drivers/staging/r8188eu/core/rtw_mp.c | 2 +-
drivers/staging/r8188eu/hal/hal_intf.c | 11 -----------
drivers/staging/r8188eu/hal/rtl8188e_hal_init.c | 1 -
drivers/staging/r8188eu/include/hal_intf.h | 5 -----
drivers/staging/r8188eu/os_dep/ioctl_linux.c | 12 ++++++------
6 files changed, 11 insertions(+), 28 deletions(-)
diff --git a/drivers/staging/r8188eu/core/rtw_debug.c b/drivers/staging/r8188eu/core/rtw_debug.c
index 65daf674ea69..3d613d997a38 100644
--- a/drivers/staging/r8188eu/core/rtw_debug.c
+++ b/drivers/staging/r8188eu/core/rtw_debug.c
@@ -428,7 +428,7 @@ int proc_get_rf_reg_dump1(char *page, char **start,
path = 1;
len += snprintf(page + len, count - len, "\nRF_Path(%x)\n", path);
for (i = 0; i < 0xC0; i++) {
- value = rtw_hal_read_rfreg(padapter, path, i, 0xffffffff);
+ value = rtl8188e_PHY_QueryRFReg(padapter, path, i, 0xffffffff);
if (j % 4 == 1)
len += snprintf(page + len, count - len, "0x%02x ", i);
len += snprintf(page + len, count - len, " 0x%08x ", value);
@@ -453,7 +453,7 @@ int proc_get_rf_reg_dump2(char *page, char **start,
path = 1;
len += snprintf(page + len, count - len, "\nRF_Path(%x)\n", path);
for (i = 0xC0; i < 0x100; i++) {
- value = rtw_hal_read_rfreg(padapter, path, i, 0xffffffff);
+ value = rtl8188e_PHY_QueryRFReg(padapter, path, i, 0xffffffff);
if (j % 4 == 1)
len += snprintf(page + len, count - len, "0x%02x ", i);
len += snprintf(page + len, count - len, " 0x%08x ", value);
@@ -478,7 +478,7 @@ int proc_get_rf_reg_dump3(char *page, char **start,
path = 2;
len += snprintf(page + len, count - len, "\nRF_Path(%x)\n", path);
for (i = 0; i < 0xC0; i++) {
- value = rtw_hal_read_rfreg(padapter, path, i, 0xffffffff);
+ value = rtl8188e_PHY_QueryRFReg(padapter, path, i, 0xffffffff);
if (j % 4 == 1)
len += snprintf(page + len, count - len, "0x%02x ", i);
len += snprintf(page + len, count - len, " 0x%08x ", value);
@@ -504,7 +504,7 @@ int proc_get_rf_reg_dump4(char *page, char **start,
path = 2;
len += snprintf(page + len, count - len, "\nRF_Path(%x)\n", path);
for (i = 0xC0; i < 0x100; i++) {
- value = rtw_hal_read_rfreg(padapter, path, i, 0xffffffff);
+ value = rtl8188e_PHY_QueryRFReg(padapter, path, i, 0xffffffff);
if (j % 4 == 1)
len += snprintf(page + len, count - len, "0x%02x ", i);
len += snprintf(page + len, count - len, " 0x%08x ", value);
diff --git a/drivers/staging/r8188eu/core/rtw_mp.c b/drivers/staging/r8188eu/core/rtw_mp.c
index c0400196b55e..011d2f915cc9 100644
--- a/drivers/staging/r8188eu/core/rtw_mp.c
+++ b/drivers/staging/r8188eu/core/rtw_mp.c
@@ -19,7 +19,7 @@ void write_bbreg(struct adapter *padapter, u32 addr, u32 bitmask, u32 val)
u32 _read_rfreg(struct adapter *padapter, u8 rfpath, u32 addr, u32 bitmask)
{
- return rtw_hal_read_rfreg(padapter, (enum rf_radio_path)rfpath, addr, bitmask);
+ return rtl8188e_PHY_QueryRFReg(padapter, (enum rf_radio_path)rfpath, addr, bitmask);
}
void _write_rfreg(struct adapter *padapter, u8 rfpath, u32 addr, u32 bitmask, u32 val)
diff --git a/drivers/staging/r8188eu/hal/hal_intf.c b/drivers/staging/r8188eu/hal/hal_intf.c
index 155b2f580054..72e4b17c9fc0 100644
--- a/drivers/staging/r8188eu/hal/hal_intf.c
+++ b/drivers/staging/r8188eu/hal/hal_intf.c
@@ -125,17 +125,6 @@ void rtw_hal_update_ra_mask(struct adapter *adapt, u32 mac_id, u8 rssi_level)
}
}
-u32 rtw_hal_read_rfreg(struct adapter *adapt, enum rf_radio_path rfpath,
- u32 regaddr, u32 bitmask)
-{
- u32 data = 0;
-
- if (adapt->HalFunc.read_rfreg)
- data = adapt->HalFunc.read_rfreg(adapt, rfpath, regaddr,
- bitmask);
- return data;
-}
-
void rtw_hal_write_rfreg(struct adapter *adapt, enum rf_radio_path rfpath,
u32 regaddr, u32 bitmask, u32 data)
{
diff --git a/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c b/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c
index dfc38ff3c750..3806afc03d8e 100644
--- a/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c
+++ b/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c
@@ -1750,7 +1750,6 @@ void hal_notch_filter_8188e(struct adapter *adapter, bool enable)
}
void rtl8188e_set_hal_ops(struct hal_ops *pHalFunc)
{
- pHalFunc->read_rfreg = &rtl8188e_PHY_QueryRFReg;
pHalFunc->write_rfreg = &rtl8188e_PHY_SetRFReg;
}
diff --git a/drivers/staging/r8188eu/include/hal_intf.h b/drivers/staging/r8188eu/include/hal_intf.h
index 11b0871ab66a..0aebf40c8b1f 100644
--- a/drivers/staging/r8188eu/include/hal_intf.h
+++ b/drivers/staging/r8188eu/include/hal_intf.h
@@ -147,9 +147,6 @@ struct hal_ops {
enum hal_def_variable eVariable,
void *pValue);
- u32 (*read_rfreg)(struct adapter *padapter,
- enum rf_radio_path eRFPath, u32 RegAddr,
- u32 BitMask);
void (*write_rfreg)(struct adapter *padapter,
enum rf_radio_path eRFPath, u32 RegAddr,
u32 BitMask, u32 Data);
@@ -217,8 +214,6 @@ void rtw_hal_update_ra_mask(struct adapter *padapter, u32 mac_id, u8 level);
void rtw_hal_clone_data(struct adapter *dst_adapt,
struct adapter *src_adapt);
-u32 rtw_hal_read_rfreg(struct adapter *padapter, enum rf_radio_path eRFPath,
- u32 RegAddr, u32 BitMask);
void rtw_hal_write_rfreg(struct adapter *padapter,
enum rf_radio_path eRFPath, u32 RegAddr,
u32 BitMask, u32 Data);
diff --git a/drivers/staging/r8188eu/os_dep/ioctl_linux.c b/drivers/staging/r8188eu/os_dep/ioctl_linux.c
index cc03be3bbe0b..21a5d7c54860 100644
--- a/drivers/staging/r8188eu/os_dep/ioctl_linux.c
+++ b/drivers/staging/r8188eu/os_dep/ioctl_linux.c
@@ -2122,7 +2122,7 @@ static int rtw_wx_read_rf(struct net_device *dev,
path = *(u32 *)extra;
addr = *((u32 *)extra + 1);
- data32 = rtw_hal_read_rfreg(padapter, path, addr, 0xFFFFF);
+ data32 = rtl8188e_PHY_QueryRFReg(padapter, path, addr, 0xFFFFF);
/*
* IMPORTANT!!
* Only when wireless private ioctl is at odd order,
@@ -2262,7 +2262,7 @@ static void rtw_dbg_mode_hdl(struct adapter *padapter, u32 id, u8 *pdata, u32 le
path = (u8)prfreg->path;
offset = (u8)prfreg->offset;
- value = rtw_hal_read_rfreg(padapter, path, offset, 0xffffffff);
+ value = rtl8188e_PHY_QueryRFReg(padapter, path, offset, 0xffffffff);
prfreg->value = value;
@@ -3890,7 +3890,7 @@ static void rf_reg_dump(struct adapter *padapter)
for (path = 0; path < path_nums; path++) {
pr_info("\nRF_Path(%x)\n", path);
for (i = 0; i < 0x100; i++) {
- value = rtw_hal_read_rfreg(padapter, path, i, 0xffffffff);
+ value = rtl8188e_PHY_QueryRFReg(padapter, path, i, 0xffffffff);
if (j % 4 == 1)
pr_info("0x%02x ", i);
pr_info(" 0x%08x ", value);
@@ -3965,11 +3965,11 @@ static int rtw_dbg_port(struct net_device *dev,
DBG_88E("write_bbreg(0x%x) = 0x%x\n", arg, rtl8188e_PHY_QueryBBReg(padapter, arg, 0xffffffff));
break;
case 0x74:/* read_rf */
- DBG_88E("read RF_reg path(0x%02x), offset(0x%x), value(0x%08x)\n", minor_cmd, arg, rtw_hal_read_rfreg(padapter, minor_cmd, arg, 0xffffffff));
+ DBG_88E("read RF_reg path(0x%02x), offset(0x%x), value(0x%08x)\n", minor_cmd, arg, rtl8188e_PHY_QueryRFReg(padapter, minor_cmd, arg, 0xffffffff));
break;
case 0x75:/* write_rf */
rtw_hal_write_rfreg(padapter, minor_cmd, arg, 0xffffffff, extra_arg);
- DBG_88E("write RF_reg path(0x%02x), offset(0x%x), value(0x%08x)\n", minor_cmd, arg, rtw_hal_read_rfreg(padapter, minor_cmd, arg, 0xffffffff));
+ DBG_88E("write RF_reg path(0x%02x), offset(0x%x), value(0x%08x)\n", minor_cmd, arg, rtl8188e_PHY_QueryRFReg(padapter, minor_cmd, arg, 0xffffffff));
break;
case 0x76:
@@ -6069,7 +6069,7 @@ static int rtw_mp_dump(struct net_device *dev,
for (path = 0; path < path_nums; path++) {
for (i = 0; i < 0x34; i++) {
- value = rtw_hal_read_rfreg(padapter, path, i, 0xffffffff);
+ value = rtl8188e_PHY_QueryRFReg(padapter, path, i, 0xffffffff);
if (j % 4 == 1)
DBG_88E("0x%02x ", i);
DBG_88E(" 0x%08x ", value);
--
2.33.0
next prev parent reply other threads:[~2021-09-10 20:51 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-10 20:50 [PATCH 0/7] remove pointers from struct hal_ops Michael Straube
2021-09-10 20:50 ` [PATCH 1/7] staging: r8188eu: remove mgnt_xmit " Michael Straube
2021-09-10 20:50 ` [PATCH 2/7] staging: r8188eu: remove hal_xmit " Michael Straube
2021-09-10 20:50 ` [PATCH 3/7] staging: r8188eu: remove read_bbreg " Michael Straube
2021-09-10 20:50 ` [PATCH 4/7] staging: r8188eu: remove write_bbreg " Michael Straube
2021-09-10 20:50 ` Michael Straube [this message]
2021-09-10 20:50 ` [PATCH 6/7] staging: r8188eu: remove write_rfreg " Michael Straube
2021-09-10 20:50 ` [PATCH 7/7] staging: r8188eu: remove rtl8188e_set_hal_ops() Michael Straube
2021-09-11 9:38 ` [PATCH 0/7] remove pointers from struct hal_ops Fabio M. De Francesco
2021-09-11 10:24 ` Michael Straube
2021-09-11 10:50 ` Fabio M. De Francesco
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210910205033.3778-6-straube.linux@gmail.com \
--to=straube.linux@gmail.com \
--cc=Larry.Finger@lwfinger.net \
--cc=fmdefrancesco@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=martin@kaiser.cx \
--cc=phil@philpotter.co.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).