[PATCH AUTOSEL 4.9 1/4] dt-bindings: mtd: gpmc: Fix the ECC bytes vs. OOB bytes equation

[PATCH AUTOSEL 4.9 1/4] dt-bindings: mtd: gpmc: Fix the ECC bytes vs. OOB bytes equation

[Sasha Levin]

From: Miquel Raynal <miquel.raynal@bootlin.com>

[ Upstream commit 778cb8e39f6ec252be50fc3850d66f3dcbd5dd5a ]

"PAGESIZE / 512" is the number of ECC chunks.
"ECC_BYTES" is the number of bytes needed to store a single ECC code.
"2" is the space reserved by the bad block marker.

"2 + (PAGESIZE / 512) * ECC_BYTES" should of course be lower or equal
than the total number of OOB bytes, otherwise it won't fit.

Fix the equation by substituting s/>=/<=/.

Suggested-by: Ryan J. Barnett <ryan.barnett@collins.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/linux-mtd/20210610143945.3504781-1-miquel.raynal@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/devicetree/bindings/mtd/gpmc-nand.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
index 174f68c26c1b..34981b98d807 100644
--- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
@@ -123,7 +123,7 @@ on various other factors also like;
 	so the device should have enough free bytes available its OOB/Spare
 	area to accommodate ECC for entire page. In general following expression
 	helps in determining if given device can accommodate ECC syndrome:
-	"2 + (PAGESIZE / 512) * ECC_BYTES" >= OOBSIZE"
+	"2 + (PAGESIZE / 512) * ECC_BYTES" <= OOBSIZE"
 	where
 		OOBSIZE		number of bytes in OOB/spare area
 		PAGESIZE	number of bytes in main-area of device page
-- 
2.30.2

[PATCH AUTOSEL 4.9 2/4] mfd: Don't use irq_create_mapping() to resolve a mapping

[Sasha Levin]

From: Marc Zyngier <maz@kernel.org>

[ Upstream commit 9ff80e2de36d0554e3a6da18a171719fe8663c17 ]

Although irq_create_mapping() is able to deal with duplicate
mappings, it really isn't supposed to be a substitute for
irq_find_mapping(), and can result in allocations that take place
in atomic context if the mapping didn't exist.

Fix the handful of MFD drivers that use irq_create_mapping() in
interrupt context by using irq_find_mapping() instead.

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/ab8500-core.c | 2 +-
 drivers/mfd/stmpe.c       | 4 ++--
 drivers/mfd/tc3589x.c     | 2 +-
 drivers/mfd/wm8994-irq.c  | 2 +-
 4 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index 2f212bdc187a..83484c43b1dc 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -489,7 +489,7 @@ static int ab8500_handle_hierarchical_line(struct ab8500 *ab8500,
 		if (line == AB8540_INT_GPIO43F || line == AB8540_INT_GPIO44F)
 			line += 1;
 
-		handle_nested_irq(irq_create_mapping(ab8500->domain, line));
+		handle_nested_irq(irq_find_mapping(ab8500->domain, line));
 	}
 
 	return 0;
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index b0c7bcdaf5df..61fb4873c061 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -1033,7 +1033,7 @@ static irqreturn_t stmpe_irq(int irq, void *data)
 
 	if (variant->id_val == STMPE801_ID ||
 	    variant->id_val == STMPE1600_ID) {
-		int base = irq_create_mapping(stmpe->domain, 0);
+		int base = irq_find_mapping(stmpe->domain, 0);
 
 		handle_nested_irq(base);
 		return IRQ_HANDLED;
@@ -1061,7 +1061,7 @@ static irqreturn_t stmpe_irq(int irq, void *data)
 		while (status) {
 			int bit = __ffs(status);
 			int line = bank * 8 + bit;
-			int nestedirq = irq_create_mapping(stmpe->domain, line);
+			int nestedirq = irq_find_mapping(stmpe->domain, line);
 
 			handle_nested_irq(nestedirq);
 			status &= ~(1 << bit);
diff --git a/drivers/mfd/tc3589x.c b/drivers/mfd/tc3589x.c
index 274bf39968aa..96187c1e5f8f 100644
--- a/drivers/mfd/tc3589x.c
+++ b/drivers/mfd/tc3589x.c
@@ -187,7 +187,7 @@ static irqreturn_t tc3589x_irq(int irq, void *data)
 
 	while (status) {
 		int bit = __ffs(status);
-		int virq = irq_create_mapping(tc3589x->domain, bit);
+		int virq = irq_find_mapping(tc3589x->domain, bit);
 
 		handle_nested_irq(virq);
 		status &= ~(1 << bit);
diff --git a/drivers/mfd/wm8994-irq.c b/drivers/mfd/wm8994-irq.c
index 18710f3b5c53..2c58d9b99a39 100644
--- a/drivers/mfd/wm8994-irq.c
+++ b/drivers/mfd/wm8994-irq.c
@@ -159,7 +159,7 @@ static irqreturn_t wm8994_edge_irq(int irq, void *data)
 	struct wm8994 *wm8994 = data;
 
 	while (gpio_get_value_cansleep(wm8994->pdata.irq_gpio))
-		handle_nested_irq(irq_create_mapping(wm8994->edge_irq, 0));
+		handle_nested_irq(irq_find_mapping(wm8994->edge_irq, 0));
 
 	return IRQ_HANDLED;
 }
-- 
2.30.2

[PATCH AUTOSEL 4.9 3/4] net: usb: cdc_mbim: avoid altsetting toggling for Telit LN920

[Sasha Levin]

From: Daniele Palmas <dnlplm@gmail.com>

[ Upstream commit aabbdc67f3485b5db27ab4eba01e5fbf1ffea62c ]

Add quirk CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE for Telit LN920
0x1061 composition in order to avoid bind error.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/cdc_mbim.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/usb/cdc_mbim.c b/drivers/net/usb/cdc_mbim.c
index 4c8baba72933..d86132d41416 100644
--- a/drivers/net/usb/cdc_mbim.c
+++ b/drivers/net/usb/cdc_mbim.c
@@ -647,6 +647,11 @@ static const struct usb_device_id mbim_devs[] = {
 	  .driver_info = (unsigned long)&cdc_mbim_info_avoid_altsetting_toggle,
 	},
 
+	/* Telit LN920 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1bc7, 0x1061, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
+	  .driver_info = (unsigned long)&cdc_mbim_info_avoid_altsetting_toggle,
+	},
+
 	/* default entry */
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
 	  .driver_info = (unsigned long)&cdc_mbim_info_zlp,
-- 
2.30.2

[PATCH AUTOSEL 4.9 4/4] ethtool: Fix an error code in cxgb2.c

[Sasha Levin]

From: Yang Li <yang.lee@linux.alibaba.com>

[ Upstream commit 7db8263a12155c7ae4ad97e850f1e499c73765fc ]

When adapter->registered_device_map is NULL, the value of err is
uncertain, we set err to -EINVAL to avoid ambiguity.

Clean up smatch warning:
drivers/net/ethernet/chelsio/cxgb/cxgb2.c:1114 init_one() warn: missing
error code 'err'

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/chelsio/cxgb/cxgb2.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/chelsio/cxgb/cxgb2.c b/drivers/net/ethernet/chelsio/cxgb/cxgb2.c
index f5f1b0b51ebd..79eb2257a30e 100644
--- a/drivers/net/ethernet/chelsio/cxgb/cxgb2.c
+++ b/drivers/net/ethernet/chelsio/cxgb/cxgb2.c
@@ -1133,6 +1133,7 @@ static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (!adapter->registered_device_map) {
 		pr_err("%s: could not register any net devices\n",
 		       pci_name(pdev));
+		err = -EINVAL;
 		goto out_release_adapter_res;
 	}
 
-- 
2.30.2