From: "Fabio M. De Francesco" <fmdefrancesco@gmail.com>
To: Larry Finger <Larry.Finger@lwfinger.net>,
Phillip Potter <phil@philpotter.co.uk>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org,
Michael Straube <straube.linux@gmail.com>
Cc: "Fabio M. De Francesco" <fmdefrancesco@gmail.com>,
Pavel Skripkin <paskripkin@gmail.com>
Subject: [PATCH v4 16/18] staging: r8188eu: hal: Clean up rtw_read*() and rtw_write*()
Date: Mon, 13 Sep 2021 20:10:00 +0200 [thread overview]
Message-ID: <20210913181002.16651-17-fmdefrancesco@gmail.com> (raw)
In-Reply-To: <20210913181002.16651-1-fmdefrancesco@gmail.com>
Clean up rtw_read{8,16,32}() and rtw_write{8,16,32,N}() in usb_ops_linux.c
because some of their code will be reused in the following two patches of
this series. This cleanup is in preparation for shortening the call chains
of rtw_read{8,16,32}() and rtw_write{8,16,32,N}().
More insights can be found at
https://lore.kernel.org/lkml/5319192.FrU0QrjFp7@localhost.localdomain/
Co-developed-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
---
v3->v4:
Make this patch.
v2->v3:
No changes.
v1->v2:
No changes.
drivers/staging/r8188eu/hal/usb_ops_linux.c | 71 +++++++++++----------
1 file changed, 36 insertions(+), 35 deletions(-)
diff --git a/drivers/staging/r8188eu/hal/usb_ops_linux.c b/drivers/staging/r8188eu/hal/usb_ops_linux.c
index 2c7e92085a6e..04402bab805e 100644
--- a/drivers/staging/r8188eu/hal/usb_ops_linux.c
+++ b/drivers/staging/r8188eu/hal/usb_ops_linux.c
@@ -91,91 +91,92 @@ static int usbctrl_vendorreq(struct intf_hdl *intfhdl, u16 value, void *data, u1
u8 rtw_read8(struct adapter *adapter, u32 addr)
{
- struct io_priv *pio_priv = &adapter->iopriv;
- struct intf_hdl *pintfhdl = &pio_priv->intf;
- u16 wvalue = (u16)(addr & 0x0000ffff);
u8 data;
+ struct io_priv *io_priv = &adapter->iopriv;
+ struct intf_hdl *intfhdl = &io_priv->intf;
+ u16 address = (u16)(addr & 0xffff);
- usbctrl_vendorreq(pintfhdl, wvalue, &data, 1, REALTEK_USB_VENQT_READ);
+ usbctrl_vendorreq(intfhdl, address, &data, 1, REALTEK_USB_VENQT_READ);
return data;
}
u16 rtw_read16(struct adapter *adapter, u32 addr)
{
- struct io_priv *pio_priv = &adapter->iopriv;
- struct intf_hdl *pintfhdl = &pio_priv->intf;
- u16 wvalue = (u16)(addr & 0x0000ffff);
- __le32 data;
+ __le16 data;
+ u16 address = (u16)(addr & 0xffff);
+ struct io_priv *io_priv = &adapter->iopriv;
+ struct intf_hdl *intfhdl = &io_priv->intf;
- usbctrl_vendorreq(pintfhdl, wvalue, &data, 2, REALTEK_USB_VENQT_READ);
+ usbctrl_vendorreq(intfhdl, address, &data, 2, REALTEK_USB_VENQT_READ);
- return (u16)(le32_to_cpu(data) & 0xffff);
+ return le16_to_cpu(data);
}
u32 rtw_read32(struct adapter *adapter, u32 addr)
{
- struct io_priv *pio_priv = &adapter->iopriv;
- struct intf_hdl *pintfhdl = &pio_priv->intf;
- u16 wvalue = (u16)(addr & 0x0000ffff);
__le32 data;
+ u16 address = (u16)(addr & 0xffff);
+ struct io_priv *io_priv = &adapter->iopriv;
+ struct intf_hdl *intfhdl = &io_priv->intf;
- usbctrl_vendorreq(pintfhdl, wvalue, &data, 4, REALTEK_USB_VENQT_READ);
+ usbctrl_vendorreq(intfhdl, address, &data, 4, REALTEK_USB_VENQT_READ);
return le32_to_cpu(data);
}
int rtw_write8(struct adapter *adapter, u32 addr, u8 val)
{
- struct io_priv *pio_priv = &adapter->iopriv;
- struct intf_hdl *pintfhdl = &pio_priv->intf;
- u16 wvalue = (u16)(addr & 0x0000ffff);
int ret;
+ u16 address = (u16)(addr & 0xffff);
+ struct io_priv *io_priv = &adapter->iopriv;
+ struct intf_hdl *intfhdl = &io_priv->intf;
- ret = usbctrl_vendorreq(pintfhdl, wvalue, &val, 1, REALTEK_USB_VENQT_WRITE);
+ ret = usbctrl_vendorreq(intfhdl, address, &val, 1, REALTEK_USB_VENQT_WRITE);
return RTW_STATUS_CODE(ret);
}
int rtw_write16(struct adapter *adapter, u32 addr, u16 val)
{
- struct io_priv *pio_priv = &adapter->iopriv;
- struct intf_hdl *pintfhdl = &pio_priv->intf;
- u16 wvalue = (u16)(addr & 0x0000ffff);
- __le32 data = cpu_to_le32(val & 0x0000ffff);
int ret;
+ u16 address = (u16)(addr & 0xffff);
+ __le16 data = cpu_to_le16(val);
+ struct io_priv *io_priv = &adapter->iopriv;
+ struct intf_hdl *intfhdl = &io_priv->intf;
- ret = usbctrl_vendorreq(pintfhdl, wvalue, &data, 2, REALTEK_USB_VENQT_WRITE);
+ ret = usbctrl_vendorreq(intfhdl, address, &data, 2, REALTEK_USB_VENQT_WRITE);
return RTW_STATUS_CODE(ret);
}
int rtw_write32(struct adapter *adapter, u32 addr, u32 val)
{
- struct io_priv *pio_priv = &adapter->iopriv;
- struct intf_hdl *pintfhdl = &pio_priv->intf;
- u16 wvalue = (u16)(addr & 0x0000ffff);
- __le32 data = cpu_to_le32(val);
int ret;
+ u16 address = (u16)(addr & 0xffff);
+ __le32 data = cpu_to_le32(val);
+ struct io_priv *io_priv = &adapter->iopriv;
+ struct intf_hdl *intfhdl = &io_priv->intf;
- ret = usbctrl_vendorreq(pintfhdl, wvalue, &data, 4, REALTEK_USB_VENQT_WRITE);
+ ret = usbctrl_vendorreq(intfhdl, address, &data, 4, REALTEK_USB_VENQT_WRITE);
return RTW_STATUS_CODE(ret);
}
-int rtw_writeN(struct adapter *adapter, u32 addr, u32 length, u8 *pdata)
+int rtw_writeN(struct adapter *adapter, u32 addr, u32 len, u8 *data)
{
- struct io_priv *pio_priv = &adapter->iopriv;
- struct intf_hdl *pintfhdl = &pio_priv->intf;
- u16 wvalue = (u16)(addr & 0x0000ffff);
- u8 buf[VENDOR_CMD_MAX_DATA_LEN] = {0};
int ret;
+ u16 address = (u16)(addr & 0xffff);
+ u16 length = (u16)(len & 0xffff);
+ u8 buf[VENDOR_CMD_MAX_DATA_LEN] = {0};
+ struct io_priv *io_priv = &adapter->iopriv;
+ struct intf_hdl *intfhdl = &io_priv->intf;
if (length > VENDOR_CMD_MAX_DATA_LEN)
return _FAIL;
- memcpy(buf, pdata, length);
- ret = usbctrl_vendorreq(pintfhdl, wvalue, buf, (length & 0xffff), REALTEK_USB_VENQT_WRITE);
+ memcpy(buf, data, length);
+ ret = usbctrl_vendorreq(intfhdl, address, buf, length, REALTEK_USB_VENQT_WRITE);
return RTW_STATUS_CODE(ret);
}
--
2.33.0
next prev parent reply other threads:[~2021-09-13 18:13 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-13 18:09 [PATCH v4 00/18] staging: r8188eu: Shorten and simplify calls chain Fabio M. De Francesco
2021-09-13 18:09 ` [PATCH v4 01/18] staging: r8188eu: remove usb_{read,write}_mem Fabio M. De Francesco
2021-09-13 18:09 ` [PATCH v4 02/18] staging: r8188eu: remove the helpers of rtw_read8() Fabio M. De Francesco
2021-09-13 18:09 ` [PATCH v4 03/18] staging: r8188eu: remove the helpers of rtw_read16() Fabio M. De Francesco
2021-09-13 18:09 ` [PATCH v4 04/18] staging: r8188eu: remove the helpers of rtw_read32() Fabio M. De Francesco
2021-09-13 18:09 ` [PATCH v4 05/18] staging: r8188eu: remove the helpers of usb_write8 Fabio M. De Francesco
2021-09-13 18:09 ` [PATCH v4 06/18] staging: r8188eu: remove the helpers of usb_write16() Fabio M. De Francesco
2021-09-13 18:09 ` [PATCH v4 07/18] staging: r8188eu: remove the helpers of usb_write32() Fabio M. De Francesco
2021-09-13 18:09 ` [PATCH v4 08/18] staging: r8188eu: remove the helpers of usb_writeN() Fabio M. De Francesco
2021-09-13 18:09 ` [PATCH v4 09/18] staging: r8188eu: remove the helpers of rtw_read_port() Fabio M. De Francesco
2021-09-13 18:09 ` [PATCH v4 10/18] staging: r8188eu: remove the helpers of rtw_write_port() Fabio M. De Francesco
2021-09-13 18:09 ` [PATCH v4 11/18] staging: r8188eu: remove the helpers of usb_read_port_cancel() Fabio M. De Francesco
2021-09-13 18:09 ` [PATCH v4 12/18] staging: r8188eu: remove the helpers of rtw_write_port_cancel() Fabio M. De Francesco
2021-09-13 18:09 ` [PATCH v4 13/18] staging: r8188eu: remove core/rtw_io.c Fabio M. De Francesco
2021-09-13 18:09 ` [PATCH v4 14/18] staging: remove struct _io_ops Fabio M. De Francesco
2021-09-13 18:09 ` [PATCH v4 15/18] staging: r8188eu: hal: Clean up usbctrl_vendorreq() Fabio M. De Francesco
2021-09-14 9:24 ` Dan Carpenter
2021-09-14 11:18 ` Fabio M. De Francesco
2021-09-14 12:20 ` Dan Carpenter
2021-09-14 13:24 ` Fabio M. De Francesco
2021-09-14 13:30 ` Dan Carpenter
2021-09-14 14:05 ` Fabio M. De Francesco
2021-09-13 18:10 ` Fabio M. De Francesco [this message]
2021-09-14 14:33 ` [PATCH v4 16/18] staging: r8188eu: hal: Clean up rtw_read*() and rtw_write*() David Laight
2021-09-13 18:10 ` [PATCH v4 17/18] staging: r8188eu: Shorten calls chain of rtw_read8/16/32() Fabio M. De Francesco
2021-09-13 20:19 ` Pavel Skripkin
2021-09-14 9:32 ` Dan Carpenter
2021-09-14 12:55 ` Fabio M. De Francesco
2021-09-14 13:01 ` Dan Carpenter
2021-09-13 18:10 ` [PATCH v4 18/18] staging: r8188eu: Shorten calls chain of rtw_write8/16/32/N() Fabio M. De Francesco
2021-09-13 20:35 ` [PATCH v4 00/18] staging: r8188eu: Shorten and simplify calls chain Fabio M. De Francesco
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210913181002.16651-17-fmdefrancesco@gmail.com \
--to=fmdefrancesco@gmail.com \
--cc=Larry.Finger@lwfinger.net \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=paskripkin@gmail.com \
--cc=phil@philpotter.co.uk \
--cc=straube.linux@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).