From: Pratyush Yadav <p.yadav@ti.com>
To: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: "Pratyush Yadav" <p.yadav@ti.com>,
"Laurent Pinchart" <laurent.pinchart@ideasonboard.com>,
"Nikhil Devshatwar" <nikhil.nd@ti.com>,
"Tomi Valkeinen" <tomi.valkeinen@ideasonboard.com>,
"Vignesh Raghavendra" <vigneshr@ti.com>,
"Benoit Parrot" <bparrot@ti.com>,
"Maxime Ripard" <mripard@kernel.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Sakari Ailus" <sakari.ailus@linux.intel.com>,
"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-media@vger.kernel.org
Subject: [PATCH v4 10/11] media: dt-bindings: Add DT bindings for TI J721E CSI2RX driver
Date: Wed, 15 Sep 2021 17:32:39 +0530 [thread overview]
Message-ID: <20210915120240.21572-11-p.yadav@ti.com> (raw)
In-Reply-To: <20210915120240.21572-1-p.yadav@ti.com>
TI's J721E uses the Cadence CSI2RX and DPHY peripherals to facilitate
capture over a CSI-2 bus. The TI CSI2RX platform driver glues all the
parts together.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
---
(no changes since v2)
Changes in v2:
- Rename to ti,j721e-csi2rx.yaml
- Add an entry in MAINTAINERS.
- Add a description for the binding.
- Change compatible to ti,j721e-csi2rx to make it SoC specific.
- Remove description from dmas, reg, power-domains.
- Remove a limit of 2 from #address-cells and #size-cells.
- Fix add ^ to csi-bridge subnode regex.
- Make ranges mandatory.
- Add unit address in example.
- Add a reference to cdns,csi2rx in csi-bridge subnode.
- Expand the example to include the csi-bridge subnode as well.
- Re-order subject prefixes.
.../bindings/media/ti,j721e-csi2rx.yaml | 101 ++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 102 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/ti,j721e-csi2rx.yaml
diff --git a/Documentation/devicetree/bindings/media/ti,j721e-csi2rx.yaml b/Documentation/devicetree/bindings/media/ti,j721e-csi2rx.yaml
new file mode 100644
index 000000000000..db87cfd65bed
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/ti,j721e-csi2rx.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/ti,j721e-csi2rx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI J721E CSI2RX Wrapper Device Tree Bindings
+
+description: |
+ The TI J721E CSI2RX Wrapper is a wrapper around Cadence CSI2RX bridge that
+ enables sending captured frames to memory over PSI-L DMA. In the J721E
+ Technical Reference Manual (SPRUIL1B) it is referred to as "SHIM" under the
+ CSI_RX_IF section.
+
+maintainers:
+ - Pratyush Yadav <p.yadav@ti.com>
+
+properties:
+ compatible:
+ items:
+ - const: ti,j721e-csi2rx
+
+ dmas:
+ maxItems: 1
+
+ dma-names:
+ items:
+ - const: rx0
+
+ reg:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ ranges: true
+
+ "#address-cells": true
+
+ "#size-cells": true
+
+patternProperties:
+ "^csi-bridge@":
+ type: object
+ description: CSI2 bridge node.
+ $ref: cdns,csi2rx.yaml#
+
+required:
+ - compatible
+ - reg
+ - dmas
+ - dma-names
+ - power-domains
+ - ranges
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+ ti_csi2rx0: ticsi2rx@4500000 {
+ compatible = "ti,j721e-csi2rx";
+ dmas = <&main_udmap 0x4940>;
+ dma-names = "rx0";
+ reg = <0x4500000 0x1000>;
+ power-domains = <&k3_pds 26 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ cdns_csi2rx: csi-bridge@4504000 {
+ compatible = "cdns,csi2rx";
+ reg = <0x4504000 0x1000>;
+ clocks = <&k3_clks 26 2>, <&k3_clks 26 0>, <&k3_clks 26 2>,
+ <&k3_clks 26 2>, <&k3_clks 26 3>, <&k3_clks 26 3>;
+ clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
+ "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
+ phys = <&dphy0>;
+ phy-names = "dphy";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csi2_0: port@0 {
+
+ reg = <0>;
+
+ csi2rx0_in_sensor: endpoint {
+ remote-endpoint = <&csi2_cam0>;
+ bus-type = <4>; /* CSI2 DPHY. */
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 7ee236cbd016..7b3e557c9d3b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -18716,6 +18716,7 @@ TI J721E CSI2RX DRIVER
M: Pratyush Yadav <p.yadav@ti.com>
L: linux-media@vger.kernel.org
S: Supported
+F: Documentation/devicetree/bindings/media/ti,j721e-csi2rx.yaml
F: drivers/media/platform/ti/j721e-csi2rx/
TI DAVINCI MACHINE SUPPORT
--
2.33.0
next prev parent reply other threads:[~2021-09-15 12:03 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-15 12:02 [PATCH v4 00/11] CSI2RX support on J721E Pratyush Yadav
2021-09-15 12:02 ` [PATCH v4 01/11] media: cadence: csi2rx: Unregister v4l2 async notifier Pratyush Yadav
2021-10-06 23:31 ` Laurent Pinchart
2021-10-07 12:19 ` Pratyush Yadav
2021-09-15 12:02 ` [PATCH v4 02/11] media: cadence: csi2rx: Add external DPHY support Pratyush Yadav
2021-10-06 20:19 ` Sakari Ailus
2021-10-06 21:01 ` Pratyush Yadav
2021-10-06 23:40 ` Laurent Pinchart
2021-09-15 12:02 ` [PATCH v4 03/11] media: cadence: csi2rx: Soft reset the streams before starting capture Pratyush Yadav
2021-10-06 23:41 ` Laurent Pinchart
2021-09-15 12:02 ` [PATCH v4 04/11] media: cadence: csi2rx: Set the STOP bit when stopping a stream Pratyush Yadav
2021-10-06 23:42 ` Laurent Pinchart
2021-09-15 12:02 ` [PATCH v4 05/11] media: cadence: csi2rx: Fix stream data configuration Pratyush Yadav
2021-10-06 23:44 ` Laurent Pinchart
2021-09-15 12:02 ` [PATCH v4 06/11] media: cadence: csi2rx: Populate subdev devnode Pratyush Yadav
2021-10-06 23:45 ` Laurent Pinchart
2021-09-15 12:02 ` [PATCH v4 07/11] media: Re-structure TI platform drivers Pratyush Yadav
2021-10-06 23:46 ` Laurent Pinchart
2021-09-15 12:02 ` [PATCH v4 08/11] media: ti: Add CSI2RX support for J721E Pratyush Yadav
2021-10-06 20:28 ` Sakari Ailus
2021-10-06 21:01 ` Pratyush Yadav
2021-10-06 21:08 ` Sakari Ailus
2021-09-15 12:02 ` [PATCH v4 09/11] media: dt-bindings: Make sure items in data-lanes are unique Pratyush Yadav
2021-09-21 21:31 ` Rob Herring
2021-10-06 23:47 ` Laurent Pinchart
2021-09-15 12:02 ` Pratyush Yadav [this message]
2021-09-21 21:32 ` [PATCH v4 10/11] media: dt-bindings: Add DT bindings for TI J721E CSI2RX driver Rob Herring
2021-10-06 23:49 ` Laurent Pinchart
2021-09-15 12:02 ` [PATCH v4 11/11] media: dt-bindings: Convert Cadence CSI2RX binding to YAML Pratyush Yadav
2021-09-21 21:35 ` Rob Herring
2021-10-06 23:54 ` Laurent Pinchart
2021-10-07 12:16 ` Pratyush Yadav
2021-10-06 8:21 ` [PATCH v4 00/11] CSI2RX support on J721E Pratyush Yadav
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210915120240.21572-11-p.yadav@ti.com \
--to=p.yadav@ti.com \
--cc=bparrot@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=mripard@kernel.org \
--cc=nikhil.nd@ti.com \
--cc=niklas.soderlund+renesas@ragnatech.se \
--cc=robh+dt@kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=tomi.valkeinen@ideasonboard.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).