[PATCH V5 05/10] irqchip/loongson-htvec: Add ACPI init support

[Huacai Chen <chenhuacai@loongson.cn>]

We are preparing to add new Loongson (based on LoongArch, not compatible
with old MIPS-based Loongson) support. LoongArch use ACPI other than DT
as its boot protocol, so add ACPI init support.

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
---
 drivers/irqchip/irq-loongson-htvec.c | 115 +++++++++++++++++++--------
 1 file changed, 81 insertions(+), 34 deletions(-)

diff --git a/drivers/irqchip/irq-loongson-htvec.c b/drivers/irqchip/irq-loongson-htvec.c
index 60a335d7e64e..f54c9ccbd69e 100644
--- a/drivers/irqchip/irq-loongson-htvec.c
+++ b/drivers/irqchip/irq-loongson-htvec.c
@@ -20,7 +20,6 @@
 /* Registers */
 #define HTVEC_EN_OFF		0x20
 #define HTVEC_MAX_PARENT_IRQ	8
-
 #define VEC_COUNT_PER_REG	32
 #define VEC_REG_IDX(irq_id)	((irq_id) / VEC_COUNT_PER_REG)
 #define VEC_REG_BIT(irq_id)	((irq_id) % VEC_COUNT_PER_REG)
@@ -30,8 +29,11 @@ struct htvec {
 	void __iomem		*base;
 	struct irq_domain	*htvec_domain;
 	raw_spinlock_t		htvec_lock;
+	struct fwnode_handle	*domain_handle;
 };
 
+struct htvec *htvec_priv;
+
 static void htvec_irq_dispatch(struct irq_desc *desc)
 {
 	int i;
@@ -155,64 +157,109 @@ static void htvec_reset(struct htvec *priv)
 	}
 }
 
-static int htvec_of_init(struct device_node *node,
-				struct device_node *parent)
+static int htvec_init(phys_addr_t addr, unsigned long size,
+		int num_parents, int parent_irq[], struct fwnode_handle *domain_handle)
 {
+	int i;
 	struct htvec *priv;
-	int err, parent_irq[8], i;
 
 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 
+	priv->num_parents = num_parents;
+	priv->base = ioremap(addr, size);
+	priv->domain_handle = domain_handle;
 	raw_spin_lock_init(&priv->htvec_lock);
-	priv->base = of_iomap(node, 0);
-	if (!priv->base) {
-		err = -ENOMEM;
-		goto free_priv;
-	}
-
-	/* Interrupt may come from any of the 8 interrupt lines */
-	for (i = 0; i < HTVEC_MAX_PARENT_IRQ; i++) {
-		parent_irq[i] = irq_of_parse_and_map(node, i);
-		if (parent_irq[i] <= 0)
-			break;
-
-		priv->num_parents++;
-	}
-
-	if (!priv->num_parents) {
-		pr_err("Failed to get parent irqs\n");
-		err = -ENODEV;
-		goto iounmap_base;
-	}
 
-	priv->htvec_domain = irq_domain_create_linear(of_node_to_fwnode(node),
+	/* Setup IRQ domain */
+	priv->htvec_domain = irq_domain_create_linear(priv->domain_handle,
 					(VEC_COUNT_PER_REG * priv->num_parents),
 					&htvec_domain_ops, priv);
 	if (!priv->htvec_domain) {
-		pr_err("Failed to create IRQ domain\n");
-		err = -ENOMEM;
-		goto irq_dispose;
+		pr_err("loongson-htvec: cannot add IRQ domain\n");
+		goto iounmap_base;
 	}
 
 	htvec_reset(priv);
 
-	for (i = 0; i < priv->num_parents; i++)
+	for (i = 0; i < priv->num_parents; i++) {
 		irq_set_chained_handler_and_data(parent_irq[i],
 						 htvec_irq_dispatch, priv);
+	}
+
+	htvec_priv = priv;
 
 	return 0;
 
-irq_dispose:
-	for (; i > 0; i--)
-		irq_dispose_mapping(parent_irq[i - 1]);
 iounmap_base:
 	iounmap(priv->base);
-free_priv:
+	priv->domain_handle = NULL;
 	kfree(priv);
 
-	return err;
+	return -EINVAL;
+}
+
+#ifdef CONFIG_OF
+
+static int htvec_of_init(struct device_node *node,
+				struct device_node *parent)
+{
+	int i, err;
+	int num_parents, parent_irq[8];
+	struct resource res;
+
+	if (of_address_to_resource(node, 0, &res))
+		return -EINVAL;
+
+	/* Interrupt may come from any of the 8 interrupt lines */
+	for (i = 0; i < HTVEC_MAX_PARENT_IRQ; i++) {
+		parent_irq[i] = irq_of_parse_and_map(node, i);
+		if (parent_irq[i] <= 0)
+			break;
+
+		num_parents++;
+	}
+
+	err = htvec_init(res.start, resource_size(&res),
+			num_parents, parent_irq, of_node_to_fwnode(node));
+	if (err < 0)
+		return err;
+
+	return 0;
 }
 
 IRQCHIP_DECLARE(htvec, "loongson,htvec-1.0", htvec_of_init);
+
+#endif
+
+#ifdef CONFIG_ACPI
+
+struct irq_domain *htvec_acpi_init(struct irq_domain *parent,
+				   struct acpi_madt_ht_pic *acpi_htvec)
+{
+	int i, ret;
+	int num_parents, parent_irq[8];
+	struct fwnode_handle *domain_handle;
+
+	num_parents = HTVEC_MAX_PARENT_IRQ;
+
+	domain_handle = irq_domain_alloc_fwnode((phys_addr_t *)acpi_htvec);
+	if (!domain_handle) {
+		pr_err("Unable to allocate domain handle\n");
+		return NULL;
+	}
+
+	/* Interrupt may come from any of the 8 interrupt lines */
+	for (i = 0; i < HTVEC_MAX_PARENT_IRQ; i++)
+		parent_irq[i] = irq_create_mapping(parent, acpi_htvec->cascade[i]);
+
+	ret = htvec_init(acpi_htvec->address, acpi_htvec->size,
+			num_parents, parent_irq, domain_handle);
+	if (ret < 0)
+		return NULL;
+
+	return irq_find_matching_fwnode(domain_handle, DOMAIN_BUS_ANY);
+}
+
+#endif
-- 
2.27.0