[PATCH v7 08/12] x86/tdx: Add HLT support for TDX guest

[Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>]

From: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>

Per Guest-Host-Communication Interface (GHCI) for Intel Trust
Domain Extensions (Intel TDX) specification, sec 3.8,
TDVMCALL[Instruction.HLT] provides HLT operation. Use it to implement
halt() and safe_halt() paravirtualization calls.

The same TDX hypercall is used to handle #VE exception due to
EXIT_REASON_HLT.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
---

Changes since v6:
 * None

Changes since v5:
 * Replaced sti with STI in commit log and comments.
 * Added comments for _tdx_hypercall() usage in _tdx_halt().
 * Added new helper function _tdx_halt() to contain common
   code between tdx_halt() and tdx_safe_halt().
 * Renamed tdg_->tdx_.
 * Removed BUG_ON() and used WARN_ONCE() for HLT emulation
   failure.

Changes since v4:
 * Added exception for EXIT_REASON_HLT in __tdx_hypercall() to
   enable interrupts using sti.

Changes since v3:
 * None

 arch/x86/kernel/tdcall.S | 30 +++++++++++++++++++
 arch/x86/kernel/tdx.c    | 65 ++++++++++++++++++++++++++++++++++++++--
 2 files changed, 93 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/tdcall.S b/arch/x86/kernel/tdcall.S
index 2e70133bebf2..1b9649ec2e29 100644
--- a/arch/x86/kernel/tdcall.S
+++ b/arch/x86/kernel/tdcall.S
@@ -40,6 +40,9 @@
  */
 #define tdcall .byte 0x66,0x0f,0x01,0xcc
 
+/* HLT TDVMCALL sub-function ID */
+#define EXIT_REASON_HLT			12
+
 /*
  * __tdx_module_call()  - Helper function used by TDX guests to request
  * services from the TDX module (does not include VMM services).
@@ -240,6 +243,33 @@ SYM_FUNC_START(__tdx_hypercall)
 
 	movl $TDVMCALL_EXPOSE_REGS_MASK, %ecx
 
+	/*
+	 * For the idle loop STI needs to be called directly before
+	 * the TDCALL that enters idle (EXIT_REASON_HLT case). STI
+	 * enables interrupts only one instruction later. If there
+	 * are any instructions between the STI and the TDCALL for
+	 * HLT then an interrupt could happen in that time, but the
+	 * code would go back to sleep afterwards, which can cause
+	 * longer delays.
+	 *
+	 * This leads to significant difference in network performance
+	 * benchmarks. So add a special case for EXIT_REASON_HLT to
+	 * trigger STI before TDCALL. But this change is not required
+	 * for all HLT cases. So use R15 register value to identify the
+	 * case which needs STI. So, if R11 is EXIT_REASON_HLT and R15
+	 * is 1, then call STI before TDCALL instruction. Note that R15
+	 * register is not required by TDCALL ABI when triggering the
+	 * hypercall for EXIT_REASON_HLT case. So use it in software to
+	 * select the STI case.
+	 */
+	cmpl $EXIT_REASON_HLT, %r11d
+	jne skip_sti
+	cmpl $1, %r15d
+	jne skip_sti
+	/* Set R15 register to 0, it is unused in EXIT_REASON_HLT case */
+	xor %r15, %r15
+	sti
+skip_sti:
 	tdcall
 
 	/* Restore output pointer to R9 */
diff --git a/arch/x86/kernel/tdx.c b/arch/x86/kernel/tdx.c
index 8d29ed07af1c..ec1008cc42d9 100644
--- a/arch/x86/kernel/tdx.c
+++ b/arch/x86/kernel/tdx.c
@@ -5,6 +5,7 @@
 #define pr_fmt(fmt)     "x86/tdx: " fmt
 
 #include <asm/tdx.h>
+#include <asm/vmx.h>
 
 /* TDX Module call Leaf IDs */
 #define TDGETVEINFO			3
@@ -44,6 +45,52 @@ static inline bool cpuid_has_tdx_guest(void)
 	return !memcmp("IntelTDX    ", sig, 12);
 }
 
+static __cpuidle void _tdx_halt(const bool irq_disabled, const bool do_sti)
+{
+	u64 ret;
+
+	/*
+	 * Emulate HLT operation via hypercall. More info about ABI
+	 * can be found in TDX Guest-Host-Communication Interface
+	 * (GHCI), sec 3.8.
+	 *
+	 * The VMM uses the "IRQ disabled" param to understand IRQ
+	 * enabled status (RFLAGS.IF) of TD guest and determine
+	 * whether or not it should schedule the halted vCPU if an
+	 * IRQ becomes pending. E.g. if IRQs are disabled the VMM
+	 * can keep the vCPU in virtual HLT, even if an IRQ is
+	 * pending, without hanging/breaking the guest.
+	 *
+	 * do_sti parameter is used by __tdx_hypercall() to decide
+	 * whether to call STI instruction before executing TDCALL
+	 * instruction.
+	 */
+	ret = _tdx_hypercall(EXIT_REASON_HLT, irq_disabled, 0, 0, do_sti, NULL);
+
+	/*
+	 * Use WARN_ONCE() to report the failure. Since tdx_*halt() calls
+	 * are also used in pv_ops, #VE handler error handler cannot be
+	 * used to report the failure.
+	 */
+	WARN_ONCE(ret, "HLT instruction emulation failed\n");
+}
+
+static __cpuidle void tdx_halt(void)
+{
+	const bool irq_disabled = irqs_disabled();
+	const bool do_sti = false;
+
+	_tdx_halt(irq_disabled, do_sti);
+}
+
+static __cpuidle void tdx_safe_halt(void)
+{
+	const bool irq_disabled = false; /* since sti will be called */
+	const bool do_sti = true;
+
+	_tdx_halt(irq_disabled, do_sti);
+}
+
 unsigned long tdx_get_ve_info(struct ve_info *ve)
 {
 	struct tdx_module_output out = {0};
@@ -70,8 +117,19 @@ unsigned long tdx_get_ve_info(struct ve_info *ve)
 int tdx_handle_virtualization_exception(struct pt_regs *regs,
 					struct ve_info *ve)
 {
-	pr_warn("Unexpected #VE: %lld\n", ve->exit_reason);
-	return -EFAULT;
+	switch (ve->exit_reason) {
+	case EXIT_REASON_HLT:
+		tdx_halt();
+		break;
+	default:
+		pr_warn("Unexpected #VE: %lld\n", ve->exit_reason);
+		return -EFAULT;
+	}
+
+	/* After successful #VE handling, move the IP */
+	regs->ip += ve->instr_len;
+
+	return 0;
 }
 
 void __init tdx_early_init(void)
@@ -81,5 +139,8 @@ void __init tdx_early_init(void)
 
 	setup_force_cpu_cap(X86_FEATURE_TDX_GUEST);
 
+	pv_ops.irq.safe_halt = tdx_safe_halt;
+	pv_ops.irq.halt = tdx_halt;
+
 	pr_info("Guest initialized\n");
 }
-- 
2.25.1